HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem

QuickSpecs
HP Virtual Connect 4Gb Fibre Channel Module for
c-Class BladeSystem
Overview
Simplify and make your data center change-ready. The HP Virtual Connect 4Gb Fibre Channel Module for BladeSystem c-Class is a
form, fit and functional replacement for the current HP 4Gb Virtual Connect Fibre Channel Module with enhanced support for server
side NPIV.
The new HP Virtual Connect 4Gb FC module expands on existing Virtual Connect capabilities: Allows up to 128 virtual machines
running on the same physical server to access separate storage resources. Provisioned storage resource is associated directly to a
specific virtual machine - even if the virtual server is re-allocated within the BladeSystem; Storage management is no longer
constrained to a single physical HBA on a server blade: SAN administrators can now manage virtual HBAs with the same methods
and viewpoint of physical HBAs. The HP Virtual Connect 4Gb Fibre Channel Module for the c-Class BladeSystem is the simplest,
most flexible connection to your SAN fabrics. The HP Virtual Connect 4Gb Fibre Channel Module simplifies server connections by
cleanly separating the server enclosure from SAN, simplifies SAN fabrics by reducing cables without adding switches to the domain,
and allows you to change servers in just minutes, not days.
Figure 1 HP Virtual Connect 4Gb Fibre Channel Module Front Bezel
1. UID Indicator
4. Link Status Indicator
2. Module Health Indicator
5. Port Activity Indicator
3. Port Configuration Status Indicator
6. Ports 1-4 (4Gb Fibre Channel)
What's New
Allows up to 128 virtual machines running on the same physical server to access separate storage resources.
Provisioned storage resource is associated directly to a specific virtual machine - even if the virtual server is re-allocated within
the BladeSystem
Storage management is no longer constrained to a single physical HBA on a server blade
DA - 13128
Worldwide — Version 4 — August 17, 2010
Page 1
QuickSpecs
HP Virtual Connect 4Gb Fibre Channel Module for
c-Class BladeSystem
Overview
At A Glance
Performance
Allows up to 128 virtual machines running on the same physical server to access separate storage resources.
(4) 4Gb Auto-negotiating Fibre Channel uplinks connected to external SAN switches
(16) 4Gb Auto-negotiating Fibre Channel downlink ports provide maximum HBA performance
HBA Aggregation on uplinks ports using ANSI T11 standards-based N_Port ID Virtualization (NPIV) technology
Extremely low latency throughput provides switch-like performance.
Management
Storage management is no longer constrained to a single physical HBA on a server blade
Managed with the Virtual Connect Ethernet Module
Does not add to SAN switch domains or require traditional SAN management
Appears as a pass-thru device to the SAN Manager
Virtual server profiles
Provisioned storage resource is associated directly to a specific virtual machine - even if the virtual server is re-allocated within
the BladeSystem
Ability to pre-configure server I/O connections
Ability to move, add, or change servers on the fly
Once defined, SAN Administrators don't have to be involved in server changes
Options
HP 1/10Gb Virtual Connect Ethernet Module for c-Class BladeSystem
HP 1/10Gb-F Virtual Connect Ethernet Module for c-Class BladeSystem
(4) Fibre Channel SFP's included with the Virtual Connect Fibre Channel Module
Virtual Connect Enterprise Manager
www.hp.com/go/bladesystem/virtualconnect
www.hp.com/go/vcem
Models
HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem
DA - 13128
Worldwide — Version 4 — August 17, 2010
409513-B22
Page 2
HP Virtual Connect 4Gb Fibre Channel Module for
c-Class BladeSystem
QuickSpecs
Supported Products
Compatibility
HP BladeSystem ProLiant HP ProLiant and Integrity Servers:
and Integrity Servers
Compatible with current releases of HP ProLiant and HP Integrity c-class Blade Servers supporting the
QLogic QMH2462 4Gb FC HBA or Emulex LPe1105-HP 4Gb HBA for HP c-Class BladeSystem
For the latest additional information on required firmware versions and to download firmware upgrades,
see the HP website: http://www.hp.com/go/bladesystemupdates
HP ProLiant and Integrity The HP BladeSystem c3000 and c7000 Enclosures have been designed up front with the Virtual Connect
BL c-Class
Architecture in mind incorporating the HP Onboard Administrator, ILO Management, and HP
Server Blade Enclosures Management tools inside the Virtual Connect framework.
NOTE: HP Integrity BL8x0c i2 Server Blades require OA version 3.0 or later.
For the latest additional information on required firmware versions and to download firmware upgrades,
see the HP website: http://www.hp.com/go/bladesystemupdates
Supported Configurations
1.
2.
3.
4.
Upper Fan System
Interconnect Bays 1 /2
Interconnect Bays 3 / 4
Interconnect Bays 5 / 6
HP BladeSystem c7000 Enclosure - Rear View
5. Interconnect Bays 7 / 8
6. On Board Administrator
7. Lower Fan System
8. Rear Redundant Power Complex
DA - 13128
Worldwide — Version 4 — August 17, 2010
Page 3
QuickSpecs
HP Virtual Connect 4Gb Fibre Channel Module for
c-Class BladeSystem
Supported Products
HP BladeSystem c3000 Enclosure - Front View
1. Device Bays 1 thru 8
4. Insight Display
2. Enclosure DVD Drive
5. Active Onboard Administrator
3. Standby Onboard Administrator (reserved for Future)
1.
2.
3.
4.
5.
6.
HP BladeSystem c3000 Enclosure - Rear View
Local KVM interface (reserved for future)
7. iLO/Onboard Administrator Port
Interconnect Bay 1
8. iLO/Onboard Administrator Port 2 (reserved for future)
Active Cool Fans
9. Power Supplies
Interconnect Bay 2
10. Interconnect Bay 4
Enclosure Up-link and Service Port
11. Interconnect Bay 3
Enclosure Down-link
DA - 13128
Worldwide — Version 4 — August 17, 2010
Page 4
QuickSpecs
HP Virtual Connect 4Gb Fibre Channel Module for
c-Class BladeSystem
Supported Products
Mezzanines
Port Mapping
Port mapping differs slightly between full height and half height server blades due to the support for
additional Mezzanine cards on the full height version.
HP has simplified the processes of mapping Mezzanine ports to switch ports by providing intelligent
management tools via the Onboard Administrator and HP Insight Manager Software. The Onboard
Administrator Guide, Enclosure Setup and Installation Guide provides detailed information on port
mapping.
c7000 Half Height Server Blade
c7000 Full Height Sever Blade
c3000 Half Height Server Blade
c3000 Full Height Sever Blade
The following are supported configurations for the HP Virtual Connect 4Gb Fibre Channel Module. Please note that other
interconnect options can be installed in the enclosure, but they do not inherit the benefits of Virtual Connect. Switches and Pass-Thru
modules will operate per their default configurations. Any moves, adds, or changes to servers which are connected to non-Virtual
Connect modules will require reconfiguration on the LAN and/or SAN. The Virtual Connect Manager will only manage Virtual
Connect Modules.
The HP Virtual Connect 4Gb Fibre Channel Module requires a Virtual Connect Ethernet Module installed in the system for
management and administration. The HP Virtual Connect 4Gb Fibre Channel Module requires VCFC Firmware version 1.30 or
higher. Following are more details:
DA - 13128
Worldwide — Version 4 — August 17, 2010
Page 5
HP Virtual Connect 4Gb Fibre Channel Module for
c-Class BladeSystem
QuickSpecs
Supported Products
Product
HP 4Gb Virtual Connect Fibre Channel
Module
(P/N 409513-B21)
HP Virtual Connect 4Gb Fibre Channel
Module
(P/N 409513-B22)
VC 1.32
VC 2.00
VCM 1.32
VCM 2.00
VCFC 1.21
VCFC1.30
VCM 1.32 (Not Supported)
VCM 2.00
VCFC 1.21 (Not Supported)
VCFC1.30
NOTE: Some options listed above may be discontinued.
FW Upgrade
VC 1.32 > VC 2.00
VC 1.32 > VC1.34
VC 1.34 > V2.00
FC Module Reboot
Required
Required
Not Required, same FC FW
HP BladeSystem c7000 Enclosure
NOTE: The following tables show a number of typical, supported configurations for an HP BladeSystem c7000 Enclosure.
[Bay 1] VC-Enet
[Bay 3] Other/empty
[Bay 5] Other/empty
[Bay 7] Other/empty
[Bay 2] Empty
[Bay 4] Other/empty
[Bay 6] Other/empty
[Bay 8] Other/empty
[Bay 1] VC-Enet
[Bay 3] Other/empty
[Bay 5] Other/empty
[Bay 7] Other/empty
[Bay 2] VC-Enet
[Bay 4] Other/empty
[Bay 6] Other/empty
[Bay 8] Other/empty
[Bay 1] VC-Enet
[Bay 3] VC-Enet
[Bay 5] Other/empty
[Bay 7] Other/empty
[Bay 2] VC-Enet
[Bay 4] VC-Enet
[Bay 6] Other/empty
[Bay 8] Other/empty
[Bay 1] VC-Enet
[Bay 3] Other/empty
[Bay 5] VC-Enet
[Bay 7] Empty
[Bay 2] VC-Enet
[Bay 4] Other/empty
[Bay 6] VC-Enet
[Bay 8] Empty
[Bay 1] VC-Enet
[Bay 3] VC-Enet
[Bay 5] VC-Enet
[Bay 7] Empty
[Bay 2] VC-Enet
[Bay 4] VC-Enet
[Bay 6] VC-Enet
[Bay 8] Empty
[Bay 1] VC-Enet
[Bay 3] VC-FC
[Bay 5] Other/empty
[Bay 7] Other/empty
[Bay 2] Empty
[Bay 4] Empty
[Bay 6] Other/empty
[Bay 8] Other/empty
DA - 13128
Worldwide — Version 4 — August 17, 2010
Page 6
QuickSpecs
HP Virtual Connect 4Gb Fibre Channel Module for
c-Class BladeSystem
Supported Products
[Bay 1] VC-Enet
[Bay 3] VC-FC
[Bay 5] Other/empty
[Bay 7] Other/empty
[Bay 2] VC-Enet
[Bay 4] VC-FC
[Bay 6] Other/empty
[Bay 8] Other/empty
[Bay 1] VC-Enet
[Bay 3] VC-Enet
[Bay 5] VC-FC
[Bay 7] Empty
[Bay 2] VC-Enet
[Bay 4] VC-Enet
[Bay 6] VC-FC
[Bay 8] Empty
[Bay 1] VC-Enet*
[Bay 2] VC-Enet
[Bay 3] VC-Enet
[Bay 4] VC-Enet
[Bay 5] VC-FC
[Bay 6] VC-FC
[Bay 7] VC-FC
[Bay 8] VC-FC
* This configuration is only applicable for enclosures with full-height servers.
[Bay 1] VC-Enet
[Bay 3] VC-FC
[Bay 5] VC-Enet
[Bay 7] Empty
[Bay 2] VC-Enet
[Bay 4] VC-FC
[Bay 6] VC-Enet
[Bay 8] Empty
[Bay 1] VC-Enet
[Bay 3] VC-FC
[Bay 5] VC-Enet
[Bay 7] VC-Enet
[Bay 2] VC-Enet
[Bay 4] VC-FC
[Bay 6] VC-Enet
[Bay 8] VC-Enet
[Bay 1] VC-Enet
[Bay 3] Other/empty
[Bay 5] VC-FC
[Bay 7] Empty
[Bay 2] VC-Enet
[Bay 4] Other/empty
[Bay 6] VC-FC
[Bay 8] Empty
[Bay 1] VC-Enet
[Bay 3] VC-FC
[Bay 5] VC-FC
[Bay 7] Empty
[Bay 2] VC-Enet
[Bay 4] VC-FC
[Bay 6] VC-FC
[Bay 8] Empty
[Bay 1] VC-Enet
[Bay 3] VC-Enet
[Bay 5] VC-Enet
[Bay 7] VC-Enet
[Bay 2] VC-Enet
[Bay 4] VC-Enet
[Bay 6] VC-Enet
[Bay 8] VC-Enet
DA - 13128
Worldwide — Version 4 — August 17, 2010
Page 7
QuickSpecs
HP Virtual Connect 4Gb Fibre Channel Module for
c-Class BladeSystem
Supported Products
HP BladeSystem c3000 Enclosure
NOTE: The following tables show a number of typical, supported configurations for an HP BladeSystem c3000 Enclosure.
Stacking Configuration
[Bay 1] VC-Enet
[Bay 3] Empty
[Bay 2] VC-Enet
[Bay 4] Empty
[Bay 1] VC-Enet
[Bay 3] VC-Enet
[Bay 2] VC-Enet
[Bay 4] VC-Enet
[Bay 1] VC-Enet
[Bay 3] VC-FC
[Bay 2] VC-Enet
[Bay 4] VC-FC
Stacking is only supported on Virtual Connect Ethernet Modules. The Virtual Connect Fibre Channel
modules are managed via the Virtual Connect Ethernet Modules. The Virtual Connect firmware is
dynamically mirrored between modules so all configuration data is updated simultaneously in a stack.
Fibre Channel data packets are not transmitted between modules in a stacked configuration.
DA - 13128
Worldwide — Version 4 — August 17, 2010
Page 8
QuickSpecs
HP Virtual Connect 4Gb Fibre Channel Module for
c-Class BladeSystem
Service and Support, HP Care Pack and Warranty Information
Service and Support
This product is covered by a global limited warranty and supported by HP Services and a worldwide
network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for
three years from date of purchase. Support for software and initial setup is available for 90 days from
date of purchase. Additional support may be covered under the warranty or available for an additional
fee. Enhancements to warranty services are available through HP Care Pack services or customized
service agreements.
NOTE: Server Blade Interconnect Limited Warranty includes 1 year Parts, 1 year Labor, 1-year on-site
support. Additional information regarding worldwide limited warranty and technical support is available
at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
HP services provide total care and support expertise with committed response designed to meet your IT
and business needs.
To fully capitalize on your HP BladeSystem servers' capabilities requires a service partner who thoroughly
understands your server technology and systems environment. HP Services, an industry leader in
provision of multi vender support solutions provides a range of support services designed to meet the
varying needs of business. Whether an SMB or large global corporation HP has a HP BadeSystem server
support offer to help you speedily deploy and maximize system uptime.
Recommended Service - simplify ProLiant solution implementation, maintenance, and management.
Support - 3-Year, 24x7, Same Business Day, 4-Hour response coverage
Deployment Service - Installation and Start Up for HP BladeSystem Infrastructure
Enhanced Service - optimize service level to increase IT performance and availability.
Support - -1-Year HP Proactive BladeSystem Service
Deployment Service - Enhanced Network Installation and Start-up for HP BladeSystem Switches
Installation & Start-Up service for HP BladeSystem Infrastructure plus HP BladeSystem Enhanced Network
Installation and Start-UP as per the Customer Description and/or Data Sheet. To be delivered on a
scheduled basis 8am-5pm, M-F, excluding HP holidays.
For a complete listing of service offerings and information visit:
http://www.hp.com/services/bladesystemservices
DA - 13128
Worldwide — Version 4 — August 17, 2010
Page 9
QuickSpecs
HP Virtual Connect 4Gb Fibre Channel Module for
c-Class BladeSystem
Related Options
Optional Network
Hardware
Cabling
4Gb Optical Transceivers Short Wave
(SFPs)
4Gb - 150m
Long Wave - 10 km
Optical cables
LC-LC for between 2/4Gb and 2/4Gb Fibre Channel devices
2 m LC-LC Multi-Mode Fibre Channel Cable
5 m LC-LC Multi-Mode Fibre Channel Cable
15 m LC-LC Multi-Mode Fibre Channel Cable
30 m LC-LC Multi-Mode Fibre Channel Cable
50 m LC-LC Multi-Mode Fibre Channel Cable
LC-SC for between a 1Gb and 2/4Gb Fibre Channel devices
2 m LC-SC Multi-Mode Fibre Channel Cable
5 m LC-SC Multi-Mode Fibre Channel Cable
15 m LC-SC Multi-Mode Fibre Channel Cable
Service and Support
Offerings
NOTE: The HP Care Pack service part numbers below for ProLiant BL c-Class server
blades, cover the server blade and all HP branded hardware options qualified for the
server, purchased at the same time or afterwards, internal to the server.
Hardware Services On-site Service
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
Support Plus 24
Onsite HW support 24x7, 4hr response and Microsoft O/S SW Tech support offsite,
onsite at HP's discretion, 24x7 2hr response time incl. HP holidays, Electronic
NOTE: HP Care Pack services for the c7000 and c3000 Enclosure cover the
enclosure, power supplies and fans. HP qualified rack options are covered by these
services when installed within the same rack. HP supported c-Class enclosure devices
including pass thru, Ethernet interconnect and virtual connect modules are also
covered by the c7000 and c3000 enclosure Care Pack services.
NOTE: SAN/Fabric switches for the HP c-Class BladeSystem are not covered under
the c7000 and c3000 enclosure Care Packs, SAN/Fabric switches carry separate
Care Packs. SAN/Fabric Switch Care Pack service level support should always be
uplifted to match existing storage or server service level.
Hardware Services On-site Service
Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years, Electronic
NOTE: Uplifts the Ethernet devices to the same level of service as the c-class
enclosure.
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
DA - 13128
Worldwide — Version 4 — August 17, 2010
A7446B
AE493A
221692-B21
221692-B22
221692-B23
221692-B26
221692-B27
221691-B21
221691-B22
221691-B23
UE458E
UE459E
UE460E
UE473E
UE477E
UE478E
UE479E
UE480E
Page 10
QuickSpecs
HP Virtual Connect 4Gb Fibre Channel Module for
c-Class BladeSystem
Related Options
Installation & Start-up Services
Hp BladeSystem c-Class Infrastructure Installation and Startup Service, Electronic
HP BladeSystem Enhanced Network Installation and Startup Service, Electronic
ProLiant BL c-Class Blade Server Hardware Installation, Electronic
ProLiant BL c-Class Enclosure and Server Blade Hardware Installation, Electronic
NOTE: For more information, customer/resellers can contact
http://www.hp.com/services/bladesystemservices
DA - 13128
Worldwide — Version 4 — August 17, 2010
UE602E
UE603E
UE493E
UE494E
Page 11
QuickSpecs
HP Virtual Connect 4Gb Fibre Channel Module for
c-Class BladeSystem
Technical Specifications
Shipping Dimensions
Shipping Weight
Product Specifications
Hardware
Length
Width
Height
Performance
Bandwidth
Aggregate Bandwidth
Fabric Latency (intraswitch)
352.55mm (13.88 in)
270.00mm (10.63 in)
120.65mm (4.75 in)
2.0 kg (4.4 lbs)
Up to 800 MBps throughput per port
Maximum frame size 2148 bytes (2112 byte payload)
106 MB, Full Duplex @ 1-Gbps
212 MB, Full Duplex @ 2-Gbps
426 MB, Full Duplex @ 4-Gbps
Up to 8.52 GB, Full Duplex
1-Gbps to 1-Gbps < 0.6 µsec
2-Gbps to 2-Gbps < 0.4 µsec
4-Gbps to 4-Gbps < 0.2 µsec
Number of Fibre Channel 4 external 1/2/4-Gbps ports
Ports
16 internal 1/2/4-Gbps ports
External Port Type
Configured as Fabric port (F_Port),
1Gb, 2Gb or 4Gb auto- negotiating SFP ports
Internal Port Type
Configured as Fabric Node port (N_Port),
1Gb, 2Gb or 4Gb auto- negotiating
Classes of Service
Class 2 and Class 3 Fibre Channel services
Scalability
Does not contribute to the total switch limit. See the SAN Design Guide for
latest supported configurations.
Buffer Credits
8 buffer credits per port, ASIC embedded memory
Connectors and Cabling SFP optical hot-pluggable transceiver with LC connector
Short-Wavelength Laser (SWL) up to 500m (1,640 ft.)
Long-Wavelength Laser (LWL) up to10km
Indicators
Module locator (UID)
Module status
Link and Activity
Port Configuration Status
Length
10.5in (267.7mm)
Dimensions
Width
7.5 in (92.79mm)
Height
1.1 in (27.94mm)
Weight
1.27 kg (2.8 lbs)
Environmental Ranges
Specification
10C to 35C (50F to 95F)
Temperature Range
Operating
10C to 35C (50F to 95F)
Shipping
-40C to 60C (-40F to 140F)
Storage
-20°C to 60°C (-4F to 140°F)
Maximum wet bulb
30C (80F)
temperature
Relative humidity
(noncondensing)**
Operating
10% to 90%
DA - 13128
Worldwide — Version 4 — August 17, 2010
Page 12
QuickSpecs
HP Virtual Connect 4Gb Fibre Channel Module for
c-Class BladeSystem
Technical Specifications
Power Specification
Product Specifications
Software
Shipping
Storage
Specification
12V @ 3A (36 W)
10% to 90%
10% to 95%
10C to 35C (50F to 95F)
Industry Standard NPIV
Support
The Virtual Connect Fibre Channel module works by aggregating multiple
FC HBA ports over a single N-port uplink through the use of N_port_ID
virtualization (NPIV). NPIV allows multiple distinguishable identities (multiple
port WWNs and port IDs) over a single N-port connection. Most Fibre
Channel SAN switch vendors have support for NPIV in their latest firmware
release. By conforming to the NPIV standard, SAN equipment interoperability
simplified. The Virtual Connect Fibre Channel Module Provides basic 4:1,
8:1, or 16:1 NPIV Fibre Channel concentration.
Data Center Connectivity Each Virtual Connect Fibre Channel module supports up to 4 SAN fabrics
and is typically connected to a Fibre Channel switch that has been
configured to run in NPIV mode. The 4 uplink ports are speed selectable
from 1, 2, or 4Gb/s.
The setup wizard allows SAN administrators to name the fabric that servers
will connect into and set the oversubscription rate. Fibre Channel boot
parameters and WWN administration are configurable options that can be
integrated into server profiles.
In an NPIV environment, there is an initial brief login function between the
Virtual Connect Fibre Channel Module and the data center switch. Once
completed, all HBA connections appear as though they are directly
connected between the server and the SAN switch. The Virtual Connect Fibre
Channel Module appears as a pass-thru device to the SAN, yet cables are
reduced as high as 16:1
Management Features
An HP 1/10Gb Virtual Connect Module must be present in order to
configure the VC FC Modules. This provides a complete Virtual Connect
Environment for the server connections.
Simple and intuitive Graphical User Interface (GUI) for defining, configuring,
and managing all elements of the Virtual Connect Domain.
Setup Wizards for initial domain installation and configuration and network
and SAN configuration.
Comprehensive administration, definition, and management of Ethernet
Networks, Shared Uplink Sets using VLANS, SAN Fabric management, and
Server Profiles
Domain Management of user accounts, enclosure, Virtual Connect domain
settings, and firmware updates
The location and status of Virtual Connect Modules in the HP c-Class
Enclosure and Onboard Administrator can be viewed from the Hardware
DA - 13128
Worldwide — Version 4 — August 17, 2010
Page 13
QuickSpecs
HP Virtual Connect 4Gb Fibre Channel Module for
c-Class BladeSystem
Technical Specifications
Status page. Including at-a-glance detailed information of the hardware
elements via mouse-over pop-up windows.
WWN Address Administration allows local administration of predefined
WWN addresses ranges to allow pre-provisioning of SAN volumes.
VC manager runs as a high-availability pair when HP 1/10Gb VC-Ethernet
Modules are installed in adjacent bays. All configuration data is stored in
flash memory and checkpointed to the standby module. Configurations can
also be backed up to a workstation via the GUI.
Management and
Standards Support
Standards
ANCI T11 N_Port ID Virtualization
FC-PH Rev. 4.3
FC-PH-2
FC-PH-3
FC-AL Rev 4.6
FC-AL-2 Rev 7.0
FC-FLA
FC-GS
FC-GS-2
FC-GS-3
FC-FG
FC-VI
FC Element MIB RFC 2837
Fibre Alliance MIB Version 4.0
Safety and
Compliance
Safety Certifications
UL/CUL Recognition to UL/CSA 60950-1
TUV to EN 60950-1
CB report and certificate to IEC 60950-1 with all country deviations
CE Marking
Electromagnetic
Emissions Certifications
FCC Part 15 Class A
FCC Part 15 Class A
EN 55022 Class A (CISPR22 Class A)
VCCI Class A
AS/NZS 3548 Class A or AS/NZS CISPR22 Class A
MIC Class A
CE Marking
DA - 13128
Worldwide — Version 4 — August 17, 2010
Page 14
HP Virtual Connect 4Gb Fibre Channel Module for
c-Class BladeSystem
QuickSpecs
Technical Specifications
Environment-friendly
Products and Approach
End-of-life Management
and Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go to:
http://www.hp.com/go/green. To recycle your product, please go to:
http://www.hp.com/go/green or contact your nearest HP sales office.
Products returned to HP will be recycled, recovered or disposed of in a
responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the Hewlett
Packard web site at: http://www.hp.com/go/green. These instructions may
be used by recyclers and other WEEE treatment facilities as well as HP OEM
customers who integrate and re-sell HP equipment.
© Copyright 2010 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
DA - 13128
Worldwide — Version 4 — August 17, 2010
Page 15