RAID Class
Spinpoint F1 RE
Capacity
Model
16MB
250GB
320GB
500GB
640GB
HE252HJ
HE322HJ
HE502IJ
HE642JJ
32MB
750GB
1TB
HE753LJ
HE103UJ
FEATURES
• MAX.334GB Formatted Capacity Per Disk
• Serial ATA 3.0Gbps Interface Support
• Improved recording stability over temperature with PMR
• Advanced dynamic FOD control for best data integrity
• Intelligent compensation of external disturbance
• SATA Native Command Queuing Feature
• Device Initiated SATA Power Management
• Rotational vibration sensor
• Staggerd Spin-up Support
• Environment friendly product with RoHS compliance
• Improved performance with dual-ARM based firmware
• ATA S.M.A.R.T. Compliant
• ATA Automatic Acoustic Management Feature
• ATA 48-bit Address Feature
• ATA Device Configur • SilentSeek™
• NoiseGuard™
DRIVE CONFIGURATION
Interface
ENVIRONMENTAL SPECIFICATIONS
Temperature
Operating
0 ~ 60 °C
Non-operating
-40 ~ 70 °C
Humidity (non-condensing)
Operating
5 ~ 90 %
Non-operating
5 ~ 95 %
Linear Shock (1/2 sine pulse)
Operating
70G
Non-operating
160~320GB
350 G
500~1000GB
300 G
Altitude (relative to sea level)
Operating
-300 to 3,000 m
Non-operating
-300 to 12,000 m
Serial ATA 3.0Gbps
16 / 32 MB
512 bytes
7,200 RPM
2
Buffer DRAM Size
Byte per Sector
Rotational Speed
PERFORMANCE SPECIFICATIONS
Average Seek time (typical)
8.9 ms
Average Latency
4.17 ms
Data Transfer Rate
Media to/from Buffer (Max.)
175 MB/sec
Buffer to/from Host (Max.)
300 MB/sec
Drive Ready Time (typical)
160~320GB
8 sec
500~1000GB
12 sec
RELIABILITY SPECIFICATIONS
Non-recoverable Read Error
Start/Stop Cycles
MTBF
15
1 sector in 10 bits
50,000
1.2M
PHYSICAL DIMENSION
Height (Max.)
Width
Length
Weight (avg.)
3
ACOUSTICS
Idle
160~320GB
500-1000GB
250/320GB
500-1000G
Performance Seek
2.45 Bel
2.70 Bel
2.80 Bel
2.90 Bel
26.1 mm
101.5 mm
147.0 mm
160~320GB
470 g
500/640GB
610 g
750/1000GB
650 g
* Note : Design and specifications are subject to change without prior notic
1.1MB = 1,000,000 Bytes, 1GB=1,000,000,000 Bytes
POWER REQUIREMENTS
Voltage
Capacity1
Spin-up Current (Max
Seek (typical)4
Read/Write (typical)
Idle (typical)
Standby (typical)
Sleep (typical)
2.A small portion of the 8/16/32MB buffer memory is reserved for
+5V±5%, +12V±10%
160GB
250GB
320GB
500GB
650GB
750GB
1000GB
2.0A
5.7W
6.1W
4.4W
1W
1W
2.3A
6.9W
7.4W
5.7W
1W
1W
2.4A
7.6W
8.4W
6.7W
1W
1W
firmware use
3 Average value with a high performance cover.
4 Random seek with 30% duty cycle.(Average value)
5.Power consumption values are with/without slumber mode.(Average valu
3.5" HDD product specification Rev 4.9
Match with product manual Rev 02