StarTech.com 1.8" IDE to Single Compact Flash Adapter Datasheet

1.8in IDE to Single Compact Flash SSD Adapter Card

StarTech ID: CF2IDE18

This 1.8in IDE to Compact Flash SSD Adapter Card allows you to convert a Compact Flash (CF type I/II) card or

MicroDrive into a bootable IDE Solid State Drive - a simple and convenient way to replace a 1.8in IDE hard disk drive.

The adapter card makes it easy to build your own do-it-yourself SSD (requires CF card or Micro Drive), allowing you to take advantage of the benefits that Solid State storage has to offer. With no moving parts, a SSD is the ideal addition to virtually any working environment, because it provides cooler and quieter storage than a conventional hard disk drive.

Plus, Solid State drives are less susceptible to atmospheric hazards (e.g. dust particles, atmospheric changes etc.), ensuring seamless performance regardless of environmental factors.

A highly reliable storage solution, the IDE to Compact Flash SSD Adapter Card is backed by StarTech.com's Lifetime

Warranty and free, lifetime technical support.

Applications and Solutions

• Ideal for system builders and testers requiring a convenient way to swap drives and operating systems

• Use a compact flash card as a bootable IDE hard drive

Features

• A true IDE interface

• All-in-one on board solution takes care of conversion. No software/drivers or cables required

• Compact Flash (CF) can be used as a 1.8" Hitachi or a 2.5" IDE adapter

• Compatible with CF I/II, Micro Drive

• Convert your CF for use as a SSD (solid state drive)

• LED's to indicate activity

• Reading-performance, anti-shock ability and tolerance of the the temperature difference are better than traditional hard drives

• With no moving parts, provides a silent operation that is resilient to environmental factors while reducing overall power consumption

Technical Specifications

• Product Height: 0.28 in [7 mm]

• Product Length: 2.36 in [60 mm]

• Carton Quantity: 100

• Shipping (Package) Weight: 0.33 lb [0.15 kg]

• Product Weight: 0.74 oz [21 g]

• Product Width: 2.76 in [70 mm]

• Connectors: 1x 44 pin male connector /1x Compact Flash, Micro Drive

• Mode Settings: Master/Slave

• Host type settings: 5V (1.8” IDE) / 3.3V (2.5” IDE)

• Humidity: Max. 95 %, non condensing

• Operating Temperature: 0ºC to 60ºC

• Note: Does not support Hot-Swapping