LAC39_59_6900RN.ES_ENG_MFL60496405
ENGLISH
DEUTSCH
LAC3900RN / LAC5900RN / LAC6900RN
FRANÇAIS
ESPAÑOL
ITALIANO
PORTUGUÊS
∂§§H¡π∫A
Table of Contents
3
4
5
6
7
8
9
10
11
2
Safety Note
[LAC3900RN/LAC5900RN] Front Panel / Remote Control
[LAC6900RN] Front Panel / Remote Control
[LAC3900RN/LAC5900RN] About Detachable Control Panel
[LAC6900RN] About Detachable Control Panel
Installation
Basic installation
Removing the existing receiver unit
ISO-DIN installation
Battery installation
Connection
Basic operation
Mute
Using the EQ
Adjusting the sound level
XDSS+ (Extreme Dynamic Sound System)
Checking the clock
Setting the clock
Listening a CD
Pause or restart a CD
Search for a section within a track / file
Skip to another track / file
Intro scan
Repeat
Shuffle
MP3/WMA Track -10 / +10
MP3/WMA Folder UP/DOWN
Checking information about your music
CAR CD/MP3/WMA Receiver
12
13
14
15
Listening to the radio
Auto search memory
Storing and recalling broadcast frequencies
To scan the preset stations
To tune in the preset stations
Listening RDS broadcasting
Connecting USB device (Optional)
Connecting an Auxiliary Equipment
Changing settings
Troubleshooting
Specifications
This product is manufactured to comply with Directive
2006/28/EEC(ANNEX I , 3.2.9), 72/245/EEC, and
2006/95/EC.
European representative :
LG Electronics Service Europe B.V. Veluwezoom 15, 1327
AE Almere, The Netherlands
(Tel : +31-036-547-8940)
The unit is compatible with the steering wheel remote control.
The function allows operation by sending the steering wheel
remote control signal to the unit.
For details, consult with your dealer.
Safety Note
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : This product uses a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully
and retain it for future reference.
Should the unit require maintenance, contact an authorized service center.
Performing controls, adjustments, or carrying out procedures other than those
specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure. Visible
laser radiation when open. DO NOT STARE INTO BEAM.
CAUTION : TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT SPLIT COVER(OR BACK) NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.
Always operate the vehicle in a safe manner.
Do not become distracted by the vehicle while driving, and always be fully
aware of all driving condition. Do not change settings, or any functions.
Pull over in a safe and legal manner before attempting such operations.
Do not use for many hours at extremely low or high temperature.
(-10~60°C)
To reduce the risk of electric shock, do not remove the cover or back of
this product. There are no user-serviceable parts inside.
Refer servicing to qualified service personnel.
To reduce the risk of fire or electric shock, do not expose this product to
dripping or splashing water, rain, or moisture.
The temperature of unit’s outside can be extremely high, please use the
unit after proper installation in your vehicle.
8 cm
This unit cannot play 8cm disc (use 12cm disc only).
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product
it means the product is covered by the European Directive
2002/96/EC.
2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection
facilities appointed by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential
negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance,
please contact your city office, waste disposal service or the shop
where you purchased the product.
Caution
When being connected in a wrong way, the unit displays as follows.
- Antenna port short : “ANTENNA ON PORT SHORT CIRCUIT CHECK”
After connecting it again, restart the unit.
You have to set the disc format option to [Mastered] in order to make the
discs compatible with the LG players when formatting rewritable discs.
When setting the option to Live File System, you cannot use it on LG players.
(Mastered/Live File System : Disc format system for Windows Vista)
CAR CD/MP3/WMA Receiver
3
[LAC3900RN/LAC5900RN] Front Panel / Remote Control
1
2
3
4
5
6
LAC3900RN
LAC5900RN
1
10
3
11
INT
4
1
2
10
3
INT
11
12
4
5
6
7
13
5
6
7
13
8
14
8
14
15
9
15
9
8 CD slot
9 Display window
10 • Traffic
Announcement[TA]
• Programme
Type[PTY]
11 Display [DISP]
12 Eject Z
13 Release
14 USB slot(Optional)
15 AUX in
16 Preset Station [1~6]
17 Shuffle [SHF]
18 Repeat [RPT]
19 Intro Scan [INT]
20 Play/Pause B/X
21 • [BAND]
• [DRIVE] (Optional)
22 • [MENU]
Power [POWER] /
Mute
Select [MENU/SEL]
Source [SRC]
Play / Pause B/X
Intro Scan [INT]
Shuffle [SHF]
• MP3/WMA Track +10
• Folder Up U
• Auto Store
• CD Skip / Search
• Seek / Tune ?m m
9
1
2
.
.
16
4
7
SOURCE [SRC]
U/AS]
• Auto Store [U
u/PS]
• Preset Scan [u
• MP3/WMA Track
u
+10/-10 U/u
• Folder Up/Down
U/u
u
Skip / Search / Seek /
Tune -?b / B?+
• Volume
• [MUTE]
• Power [PWR]
Equalizer [EQ]
Extreme Dynamic
Sound System
[XDSS+]
Remote
Sensor(Optional)
Select [SEL]
CAR CD/MP3/WMA Receiver
12
16
2
3
4
5
6
7
8
10
11
12
13
14
15
16
• [BAND]
• DRIVE [DRV]
(Optional)
Volume Up
/
Down
Number [#]
Repeat [RPT]
Number [0 -9]
• CD Skip / Search
• Seek / Tune M M?
Display [DISP.]
• MP3/WMA Track -10
• Folder Down u
• Preset Scan
[LAC6900RN] Front Panel / Remote Control
1
2
10
3
4
INT
11
12
5
6
7
13
8
14
9
15
16
20
1
2
3
4
5
6
7
8
U/AS]
• Auto Store [U
u/PS]
• Preset Scan [u
u
• MP3/WMA Track +10/-10 U/u
u
• Folder Up/Down U/u
Skip / Search / Seek / Tune -?b /
B?+
• Volume
• [MUTE]
• Power [PWR]
Equalizer [EQ]
Extreme Dynamic Sound System
[XDSS+]
Select [SEL]
SOURCE [SRC]
Remote Sensor(Optional)
Display window
9
10
11
12
13
14
15
16
17
18
19
20
• Traffic Announcement[TA]
• Programme Type[PTY]
Display [DISP]
Release
USB slot
AUX in
Preset Station [1~6]
Shuffle [SHF]
Repeat [RPT]
Intro Scan [INT]
Play/Pause B/X
• [BAND]
• [DRIVE]
• [MENU]
1
Power [POWER] / Mute
2
3
4
5
6
7
Select [MENU/SEL]
Source [SRC]
Play / Pause B/X
Intro Scan [INT]
Shuffle [SHF]
• MP3/WMA Track +10
• Folder Up U
• Auto Store
• CD Skip / Search
• Seek / Tune ?m m
8
9
• [BAND]
• DRIVE [DRV]
10 Volume Up
/ Down
11
12
13
14
Number [#]
Repeat [RPT]
Number [0 -9]
• CD Skip / Search
• Seek / Tune M M?
15 Display [DISP.]
16 • MP3/WMA Track -10
• Folder Down u
• Preset Scan
CAR CD/MP3/WMA Receiver
5
[LAC3900RN/LAC5900RN] About Detachable Control Panel
Attaching the control panel
1
2
Detaching the control panel
Align the left side of the panel with
the stopper.
Push the right side or panel into the
unit until it clicks.
1
1
2
2
3
4
Press the “
” (RELEASE) to
open the control panel.
Hold the right part of the control
panel.
Pull out the control panel.
Place the control panel in the
supplied protective case.
2
3
1
Caution
• The control buttons may not work properly if the control panel is not attached
properly. If this occurs, gently press the display.
4
• Do not leave the control panel in any area exposed to high temperatures or
direct sunlight.
• Do not drop the control panel or otherwise subject it to strong impact.
• Do not allow such volatile agents as benzine, thinner, or insecticides to come
into contact with the surface of the control panel.
Control panel
Protective Case
Note
Periodically wipe the contacts on the back of the control
panel with a cotton swap moistened with alcohol. For safety,
turn off the ignition before cleaning, and remove the key
from the ignition switch.
6
CAR CD/MP3/WMA Receiver
[LAC6900RN] About Detachable Control Panel
Attaching the control panel
1
2
D
B
A
C
3
Detaching the control panel
1
Attach part A of the control panel to
part B of the unit.
Attach part C of the control panel to
part D of the unit while pushing the
control panel to left.
Close the control panel.
2
3
4
Press the “
” button to unlock
the control panel.
Push the control panel to left.
Pull the control panel out of the
unit.
Put the detached control panel
into the protective case.
Caution
• When detaching or attaching the control panel, do not press the display or
control buttons.
• The control buttons may not work properly if the control panel is not attached
properly. If this occurs, gently press the control panel.
• Do not leave the control panel in any area exposed to high temperatures or
direct sunlight.
• Do not drop the control panel or otherwise subject it to strong impact.
• Do not allow such volatile agents as benzine, thinner, or insecticides to come
into contact with the surface of the control panel.
• Do not try to disassemble the control panel.
Control panel
Protective Case
Note
Periodically wipe the contacts on the back of the control
panel with a cotton swap moistened with alcohol. For safety,
turn off the ignition before cleaning, and remove the key
from the ignition switch.
CAR CD/MP3/WMA Receiver
7
Installation
ISO-DIN Installation
Basic Installation
1
Before installing, make sure that the
ignition-switch is set to OFF and
remove the terminal of the car battery
to avoid short-circuiting.
Bend the claws
according to
the thickness
of the
dashboard
1
2
3
4
Remove the existing receiver unit.
Make the necessary connections.
Install the installation sleeve.
Install the unit into the installation
sleeve.
Control panel
2
1
4
5
3
3
6
Control panel
2
4
5
6
Slide the unit into the ISO-DIN
frame.
Fit screws removed from the old
unit.
Slide the unit and frame into the
dash opening.
Install the dash panel or adapter
plate.
Install the trim ring to the unit.
Install the control panel to the unit.
Battery Installation
1
Removing the existing receiver unit
If there is already an installation
sleeve for the receiver unit in the
dashboard, it must be removed.
A
1
2
A
8
CAR CD/MP3/WMA Receiver
3
Remove the rear support from the
unit.
Remove the control panel and trim
ring from the unit.
Insert the lever A into the hole on
one side of the unit.
Perform the same operation on
the other side and pull the unit out
from the mounting sleeve.
2
3
Pull out the battery holder with a
sharp product like a ball point pen.
Put the battery with
and
correctly on the battery holder.
Push the battery holder back into its
original position.
Note
• Use only one CR2025 (3V) lithium battery.
• Remove the battery if the remote control is not used for a long period of
time.
• Do not leave the product in a hot or humid place.
• Do not handle the battery with metallic tools.
• Do not store the battery with metallic materials.
Connection
Before connecting, make sure that the ignition switch is set to OFF, and remove the battery # terminal to avoid short circuits.
Wired remote input(Black): Hard-wired control adapter can be connected. (Not supplied/Optional)
To Audio in
To Audio out
Rear Left (Sub-woofer Left)
Rear Right (Sub-woofer Right)
*Sub-woofer is optional.
Front Left
Front Right
B
A
1
5
2
3
4
1
2
3
4
6
7
5
6
7
8
A7
Power Antenna(Blue)
A6
Dimmer(Pink)
A2
To Ignition(Red)
A1
Amplifier
(Optional)
Power
Antenna
Control Relay
Dimmer Switch
Ignition Switch
B 1
B 2
To Battery(+)(Yellow)
B 3
B 4
A5
Ground(-)(Black)
BATTERY
B 5
B 6
B 7
B 8
A3
Remote On(Blue/White)
A4
Phone Mute(Orange)
B
B
B
B
B
B
B
B
1
2
3
4
5
6
7
8
Violet / Black Stripe : Rear Right –
Violet : Rear Right +
Gray / Black Stripe : Front Right –
Gray : Front Right +
Green/ Black Stripe : Rear Left –
Green : Rear Left +
White/Black Stripe : Front Left –
White : Front Left +
Amplifier
(Optional)
CAR CD/MP3/WMA Receiver
9
Adjusting the sound level
Basic Operation
ON PLAYER
1. Turn the unit on.
PWR
2. Select a source.
SRC
3. Adjust the volume.
Rotate PWR
ON REMOTE
POWER
SRC
VOLUME
Press SEL (SEL/MENU on the remote control) repeatedly to select the mode
you want to adjust from VOL(volume), BAL(left/right speaker), FAD(front/rear
speaker) and SUB(Sub-woofer:optional). To adjust sound quality, rotate PWR or
on the remote control.
press VOLUME
Note
When EQ and XDSS+ is set to “Off”, you can also adjust the sound level
(BAS(bass), MID(middle), TRB(treble)) settings.
Basic operation - more you can do
XDSS+ (Extreme Dynamic Sound System)
Mute
Press VOL/MUTE (POWER
cel it, press again.
on the remote control) to cut the sound. To can-
Using the EQ
EQ is to increase or decrease the signal strength of audio frequencies. The function helps you to enjoy sound more plentifully. Press EQ/XDSS+ repeatedly. The
indicator lights up in the following order.
POP t CLASSIC t ROCK t JAZZ t VOCAL t SALSA t SAMBA t
REGGAE t RUSSY t USER1 t USER2 t Off (not displayed)
Note
• When XDSS+ is set to “Off”, you can adjust the EQ settings.
• You can adjust sound level to your preference. Once you select a USER mode
and then adjust the sound level, it will be automatically stored for the currently
selected USER mode. Refer to the “Adjusting the sound level” for USER 1/2
mode.
10
CAR CD/MP3/WMA Receiver
Press and hold EQ/XDSS+ . (XDSS+ : Improves the treble, bass sound.) To cancel it, press and hold it again.
Checking the clock
You can see the clock pressing DISP (DISP. on the remote control).
Setting the clock
When RDS CT information is not received and then you set CT on the setting
menu to OFF, you can adjust the time by yourself.
Refer to the page 13 for setting the CT(Clock Time) ON/OFF.
1 Press the DISP(DISP. on the remote control) and then, press and hold it for
more 1 second.
2 Press the B?+(BB> on the remote control) to adjust the hour.
3 Press the -?b (.bb on the remote control) to adjust the minute.
4 Press DISP(DISP. on the remote control) again to finish the setting.
Shuffle
Listening to a CD
ON PLAYER
ON REMOTE
-
Rotate PWR
-
1. Open the front panel.
[Only in LAC6900RN]
2. Insert a CD.
3. Adjust the volume.
VOLUME
Press or press and hold SHF on the player (SHF on the remote control). Each
files in the current selected folder (
SHF) or all of the tracks/files (SHF) on
the disc is played randomly. Press SHF again to cancel it.
Note
During random playback, if you press -?b , you won’t go back to the previous
track.
MP3/WMA Track -10 / +10
Listening to a CD - more you can do
(If there is no folder or one folder.) During playback push the button down to
u/PS to go back 10 tracks, or push it up to U/AS to go forward 10 tracks.
Pause or restart a CD
Press B[] on the player (B
B/[] on the remote control) during playback. Press this
button again to resume play.
MP3/WMA Folder UP/DOWN
Search for a section within a track / file
(If there are more than two folders.) During playback, push the button down to
u/PS to go back to the previous folder, or push it up U/AS to go forward to the
next folder.
Press and hold -?b / B?+ on the player (.bb/BB> on remote control) for
about 1 second during playback and then release at the point you want.
Checking information about your music
Skip to another track / file
Press -?b / B?+ on the player (.bb/BB> on remote control.). To skip to
previous track, press briefly -?b within 3 seconds of playing time. Press [#] and
a number you want to move on remote control to move the files/track.
Intro scan
Press or press and hold INT on the player (INT on remote control). Each files in
the current selected folder (
INT) or the first 10 seconds of each tracks/files
(INT) on the disc are played. To cancel it, press the button again.
Repeat
Press or press and hold RPT on the player (RPT on the remote control). The
current selected tracks/files (1 RPT) or folder (
RPT) on the disc is played
repeatedly. To cancel it, press the button again.
MP3/WMA files often come with tags. The tag gives the Title, Artist or Album.
Press DISP repeatedly during MP3/WMA/CD TEXT file playback. If there is no
information, “NO TEXT” will be shown in the display window.
Note
•
: The icon is displayed during MP3/WMA playback.
• MP3/WMA Disc compatibility with this unit is limited as follows:
1. Sampling Frequency / 8 - 48kHz (MP3) 22.05 - 48kHz (WMA)
2. Bit rate / within 8 - 320kbps (include VBR) (MP3) 32 -320kbps (WMA)
3. CD-R/CD-RW file system should be “ISO 9660”
4. If you record MP3/WMA files using software which cannot create a FILE
SYSTEM, for example “Direct-CD” etc., it will not be possible to playback
MP3/WMA files. We recommend that you use “Easy-CD Creator” which creates an ISO9660 file system.
Customers should also note that permission is required in order to download MP3/WMA files and music from the Internet. Our company has no
right to grant such permission. Permission should always be sought from
the copyright owner.
CAR CD/MP3/WMA Receiver
11
Listening RDS broadcasting
Listening to the radio
ON PLAYER
1. Select a source to tuner.
SRC
2. Select a band.
BAND
3. Auto seek.
Manual seek.
-?b / B?+
Press and hold
-?b / B?+
ON PLAYER
ON REMOTE
SRC
BAND
?mm/MM?
Press and hold
?mm/MM?
Listening to the radio - more you can do
1. Select a source to tuner.
Press and hold
TA/PTY
-
1- 6
1-6
RDS broadcasting information.
Press and hold the TA/PTY repeatedly for selecting each mode.
Music group t Speech Group t Search off
NO. MUSIC GROUP
Push the button up to U/AS. The six strongest broadcast frequencies will be
stored under preset button 1-6 in the order of their signal strength. To cancel,
push the button up to U/AS.
1.
2.
3.
4.
5.
6.
1 Press BAND to select desired band you want to store.
2 Select the desired frequency and press one of preset buttons 1-6 and hold
until the beep sound.
3 Repeat steps 1-2 to preset other stations.The next time, you press the same
preset button, the radio station frequency is recalled from the memory.
BAND
4. Select a station in PTY type.
Auto search memory
Storing and recalling broadcast frequencies
SRC
BAND
2. Select a band to FM.
3. Select a programme types.
ON REMOTE
SRC
POP M, ROCK M
EASY M, LIGHT M.
CLASSICS, OTHER M
JAZZ, COUNTRY
NATION M, OLDIES
FOLK M
NO. SPEECH GROUP
1. NEWS, AFFAIRS, INFO
2. SPORT, EDUCATE, DRAMA
3. CULTURE, SCIENCE, VARIED
4. WEATHER, FINANCE, CHILDREN
5. SOCIAL, RELIGION, PHONE IN
6. TRAVEL, LEISURE, DOCUMENT
Connecting USB device(Optional)
ON PLAYER
ON REMOTE
To scan the preset stations
1. Open the USB cover.
-
-
Push the button down to u/PS. Each preset station appears. To cancel, push
the button down to u/PS.
2. Connect the USB device.
-
3. Adjust the volume.
Rotate PWR
VOLUME
To tune in the preset stations
Moving to another drive
Press BAND to select the desired band and press the desired preset button 1-6
(preset button 1-6 on the remote control).
Note
• When a station is stored on the preset numbers on which another station of
the same band has already been preset, the previously preset station is automatically erased.
When connecting this unit to multi reader, press BAND (BAND on remote control) to go to the next drive. Each time you press the button, the driver modes
changes.
12
CAR CD/MP3/WMA Receiver
Note
• If the USB device is already connected, press SRC (SRC on remote control.)
to select a source to USB.
• Pause / Intro Scan / Repeat / Shuffle / ... functions are same with “Listening to
a CD - more you can do”. Refer to the page 11.
Connecting an Auxiliary Equipment
1. Connect an auxiliary equipment
to the AUX jack with line input
cable.
2. Select a source to AUX.
3. Play the connected Auxiliary
Equipment.
4. Adjust the volume.
ON PLAYER
-
ON REMOTE
-
SRC
SRC
-
-
Rotate PWR
VOLUME
Changing settings
1. Select one item.
ON PLAYER
ON REMOTE
Press
Press and hold
MENU
SEL/MENU
2. Select a source.
Rotate PWR
VOLUME
3. Finish the setting .
Press MENU
Press SEL/MENU
AF(Alternative frequency) ON / OFF
When the reception quality drops, the tuner automatically changes to another
station in the network, broadcasting a better reception quality, using the PI
and AF codes.
REG (Region) ON / OFF
REG ON : The unit switches to another station, within the same network,
broadcasting the same program when the receiving signals from the current
station become weak.
REG OFF : The unit switches to another station, within the same network
when the receiving signals from the current station become weak. (This
mode, the program may differ from the one currently received.)
TA(Traffic Announcement) ALARM / SEEK
TA ALARM : When the tuned station has no TP information for 5 seconds, a
double beep sound is output.
TA SEEK : When the tuned station does not receive TP information for
5 seconds, the receiver retunes to the next station that has the TP information.
PI (Programme Identification) SOUND / MUTE
PI SOUND : If the sound of a station with different PI is heard intermittently, the
receiver mutes the sound after 1 second.
PI MUTE : If the sound of a station with different PI is heard intermittently, the
receiver mutes the sound right now.
C-T(Clock Time) ON/OFF
You can use the RDS CT information to update the time. When RDS CT
information is not received and then you set CT to OFF, you can adjust the
time by yourself. Refer to the page 10 for setting the clock.
AUX (Auxiliary) ON / OFF
It is possible to use auxiliary equipment with this unit. Activate the auxiliary
setting when using auxiliary equipment connected to this unit.
AUX (Auxiliary) 00dB / +6dB
Only when you set AUX to ON as switching sources, you can adjust the volume level of each source to prevent radical changes in volume.
You can set to 0 dB or +6 dB. You may be surprised at a loud sound when
you change the source from the external component to another source.
DEMO OFF/ ON
You can change the initial indication on the display to information name
(function name, EQ name, etc...) while listening to a source.
LCD WHI / RED
You can change the LCD window color. WHI(white) <-> RED(red)
[LAC3900RN/5900RN] LED RED / GRN / AUTO
[LAC6900RN] LED BLU / RED / AUTO: You can change the button color.
COL TM (Color changing time)
Only when you set LED to AUTO, you can set LED color changing time
from 5 to 60 seconds.
SW(Subwoofer) OFF / SW 55HZ / SW 85HZ / SW 120 HZ
You can enable the subwoofer.
SW OFF <-> SW 55HZ <-> SW 85HZ <-> SW 120 HZ.
DIM(Dimmer) OFF / ON / AUTO
You can change the brightness of the display window during the power-on
status. When you set DIMMER to AUTO, the dimmer operates according to
the car dimmer setting.
DIM L (Dimmer Level)
When you set DIM to ON/AUTO, you can adjust the dimmer level. (-2,-1,0,+1,+2)
A-EQ(Auto EQ) ON/OFF
AUTO EQ operates only in the music file supported with Genre in the
device. When you set AUTO EQ to ON, POP, CLASSIC, ROCK, or JAZZ is
automatically selected according to the music genre.
BEEP 2ND / ALL
BEEP 2ND : The beep is generated when a key is long pressed. (1 sec)
BEEP ALL : The beep is generated when any key is pressed.
CAR CD/MP3/WMA Receiver
13
Troubleshooting
Symptom
General
Power doesn’t turn on / The
unit doesn’t operate.
Cause
Leads and connectors are not properly.
The fuse is blown.
CD
Radio
Noise and other factors are causing the builtin microprocessor to operate incorrectly.
No sound is heard / The vol- Cables are not connected correctly.
ume level will not rise.
There’s audio skipping.
This unit is not firmly secured.
The playback is not possi
The disc is dirty.
ble.
The loaded disc is of a type this unit cannot
play.
The signal strength of the stations is too
Radio stations cannot be
weak(when tuning in with automatic tuning.)
tuned in.
No station has been preset or preset stations
have been cleared(when tuning by scanning
preset stations.)
Remote
control
14
The unit does not operate
Battery power is low.
correctly even when the
appropriate remote
control buttons are pressed.
CAR CD/MP3/WMA Receiver
Correction
Confirm once more that all connections are
correct.
Rectify the problem that caused the fuse to
blow, and then replace it. Be very sure to
install the correct fuse with the same rate.
Turn the unit off and then on.
Connect the cables correctly.
Secure this unit firmly.
Clean the disc.
Check what type the disc.
Tune in the stations manually.
Preset the stations.(Refer to the page 12)
Load new battery.
Specifications
General
Output Power
Power Source
Speaker impedance
Ground System
Dimensions (W x H x D)
Net Weight
Tuner
FM
Frequency Range
S/N Ratio
Distortion
Usable Sensitivity
AM (MW)
Frequency Range
S/N Ratio
Distortion
Usable Sensitivity
CD
Frequency Response
S/N Ratio
Distortion
Channel Separation (1kHz)
AUX
Frequency Response
S/N Ratio
Distortion
Channel Separation (1kHz)
Max Input Level (1kHz)
USB
Version
Line OUT
Frequency Response
Output Voltage
Subwoofer (optional)
Frequency Response
Output Voltage
53W x 4CH (Max.)
DC 12V
4Ω
Negative
180 x 50 x 176 mm (Without Control Panel)
1.3 kg
87.5-107.9, 87.5-108 MHz
55 dB
0.7%
12 dBµV
520-1720 or 522-1620 kHz
50 dB
1.0%
28 dBµV
20 Hz-20 kHz
80 dB
0.12%
55 dB
20 Hz-20 kHz
80 dB
0.1 %
45 dB
1.1V
USB 1.1
20Hz ~ 20 KHz
1.8 V (Max.)
20Hz ~ 120 Hz
1.8 V (Max.)
Designs and specifications are subject to change without notice.
CAR CD/MP3/WMA Receiver
15
P/NO : MFL60496405