advertisement
SFP-LLA
Low level flood ligh ng for pathways and transi onal areas where glare control and modern architecture appearance are required. Cast aluminum back box can be
“quick shipped” for easy installa on. Vandal resistant cast aluminum cover comes with shock-resistant, forward distribu on, fluted lens and ver cal lamp posi on (if using HID), offering maximum light control with minimum glare. Typical op cal system is symmetric downward distribu on however, op onal asymmetric distribu ons (le & right) and symmetric upward distribu ons are available. Op onal up light window for increased pedestrian security is also available.
APPLICATIONS:
Pathways, Courtyards, Urban Renewal,
Parking Garages/Ramps, Shopping Plazas,
Pedestrian Malls, Pedestal/Bollard, Stairway
Ligh ng, Underground Ramps, Office
Buildings etc.
227 WILKINSON RD. BRAMPTON, ON. CANADA | WWW.SOLERACORP.COM
TOLL FREE. 1-877-765-3722 | PH. 905-457-4777 | FAX. 905-457-1115
SFP-LLA - Standard
5 ½” 3”
LENGTH
12-1/2”
SFP-LLA with FG(Frosted Lens) op on
3” LENGTH
12-1/2”
WIDTH
12-1/2”
WIDTH
12-1/2”
SFP-LLA-LO (Louvered Cast Front Face, raised)
3”
LENGTH
12-1/2”
SFP-LLA-LOF (Louvered Cast Front Face, Flat)
5 ½”
WIDTH
12-1/2”
12-½”
SQ.
RT TRIM: 13-5/8” x 13-5/8”
LAMPING:
Consult Solera for higher wa ages
42 LED
55IND
Max Wa ages Available
70MH (Metal Halide)
70HPS (High Pressure Sodium)
35LPS (Low Pressure Sodium)
42PLT (Compact Fluorescent)
MOUNTING:
WM Surface wall mounted to a standard
Recessed J-BOX (by others)
RT
RT/CX
Recessed Mount (100W max)
Concrete Pour Recessed (100W max)
OPTIONS:
UL
AEL
TP
PC
SF
WG
Up Light
Quartz Restrik (relay)
Tamper Proof Hardware
Bu on Style Photocell
Single Fuse
Wire Guard
ELECTRICAL:
Select from 120V, 277V, 347V
(consult Solera for addi onal voltages)
Magne c Ballast is standard on most HID lamps. For electronic ballast specify ELB a er the lamp op on.
Electronic Ballast is standard on all LED,
CFL, BIAX and Fluorescent lamps.
OPTICS:
FT
ASY
SYM
Forward Throw Distribu on
(standard)
Assymetrical Distribu on
Symmetrical Distribu on
LENS:
LPL
FG
Linear Prisma c Lens (standard)
Frosted Tempered Glass Lens
FINISH:
Electrosta cally applied, thermally cured polyester powder coated paint:
BL
WH
BZ
SG
CC
Minitex Black
Minitex White
Minitex Bronze
Silver Gray
Custom Color *Adder (Consult Solera)
CONSTRUCTION:
Corrosion resistant cast aluminum, linear prisma c lens made from UV stabilized polycarbonate providing vandal resistance.
Down and out ligh ng pa ern minimizes up light. The lens is secured to housing through stainless steel hardware with a-channel gasket.
- - - - - - - - - -
NAME LAMPING COLOR
TEMP.
(LED)
SFP-LLA
SFP-LLA-LO
48W LED
80IND
175MH
150HPS
2PLT57
WW
NW
CW
VOLT
120V
277V
347V
120/277V
OPTICS
FT
ASY
SYM
LENS MOUNTING
LPL
FG
WM
RT
RT/CX
OPTIONS FINISH
UL
LO
AEL
TP
TS
PC
SF
WG
BL
WH
BZ
SG
CC*
SFPC
Cast aluminum housing is suitable for surface or recess ceiling moun ng. This High Performance fixture combines classical geometric form with the uniform, low-glare light distribu on offered by our
3/16” thick, polycarbonate Linear Prism Lens
(LPL). Ver cal lamp posi on ensures even, efficient illumina on with up to 5:1 spacing (for
HID or CFL). For parking garage applica ons op onal factory installed diamond panel minimizes glare in the driving lane.
APPLICATIONS:
Parking garages, Aisle Ligh ng, Dock Areas,
Subway/Train Pla orms, Tunnels, Ins tu ons etc.
CONSTRUCTION:
Corrosion resistant cast aluminum/ linear prisma c lens made from UV stabilized polycarbonate providing vandal resistance. Down and out light pa ern minimizes up light. The lens is secured to the housing through stainless steel hardware and sealed with a-channel gasket.
SIDE VIEW
227 WILKINSON RD. BRAMPTON, ON. CANADA | WWW.SOLERACORP.COM
TOLL FREE. 1-877-765-3722 | PH. 905-457-4777 | FAX. 905-457-1115
LAMPING:
Consult Solera for higher wa ages
48WLED (High Power CREE LEDs)
80IND (Induc on)
Max Wa ages Available
175MH (Metal Halide)
150HPS (High Pressure Sodium)
2PLT57 (Compact Fluorescent)
BOTTOM VIEW
Bosses (4) and Knock Outs (3) provided allow for variations in mounting according to each application and need decided by installer.
Holes can be drilled through bosses to secure fixture
Wiring can be brought through Knock
Out Holes.
BOSSES
KNOCK OUT
ELECTRICAL:
Select from 120V, 277V, 347V
(consult Solera for addi onal voltages)
Magne c Ballast is standard on most HID lamps. For electronic ballast specify ELB a er the lamp op on.
Electronic Ballast is standard on all LED,
CFL, BIAX and Fluorescent lamps.
OPTICS:
TV Type V down light (standard)
LENS:
LPL Linear Prisma c Lens with cut off to control up light(standard)
MOUNTING:
CM Surface ceiling mounted
RT
RT/CX
Recessed in ceiling (non IC)
Recessed in Ceiling with concrete pour
(100W max)
AEL
TP
TS
PC
SF
WG
OPTIONS:
LO Horizontal louver with flat tempered glass lens
Quartz Restrik (relay)
Tamper Proof Hardware
Tamper Proof Screwdriver
Bu on Style Photocell
Single Fuse
Wire Guard
FINISH:
Electrosta cally applied, thermally cured polyester powder coated paint:
BL
WH
BZ
SG
CC
Minitex Black
Minitex White
Minitex Bronze
Silver Gray
Custom Color *Adder (Consult Solera)
- - - - - - - - - -
NAME LAMPING COLOR
TEMP.
(LED)
48W LED
80IND
175MH
150HPS
2PLT57
WW
NW
CW
VOLT
120V
277V
347V
120/277V
OPTICS
FT
ASY
SYM
LENS MOUNTING
LPL WM
RT
RT/CX
OPTIONS FINISH
UL
LO
AEL
TP
TS
PC
SF
WG
BL
WH
BZ
SG
CC*
227 WILKINSON RD. BRAMPTON, ON. CANADA | WWW.SOLERACORP.COM
TOLL FREE. 1-877-765-3722 | PH. 905-457-4777 | FAX. 905-457-1115
SFPW
This mul -purpose wall mount luminaire is suitable for outdoor security ligh ng where modern shape and efficient, low-glare cut off ligh ng is required. Cast aluminum body is available for both surface and recess mount applica os. Our Linear Prism Lens (LPL) is made from stock resistant 3/16" thick polycarbonate material. The unique cut off design of the lens combined with horizontal lamp posi on eliminates uplight pollu on and tresspass into neigbouring property. Linear Prism Lens provides broad light pa ern to permit wide spacings.
Maximum wa age available is 150HPS or 150MH.
APPLICATIONS:
Security, Pedestrian Walkways, Urban Renewal,
Highway underpass, Ins tu onal, Industrial complexes...
LAMPING:
Consult Solera for higher wa ages
48WLED (High Power CREE LEDs)
80IND (Induc on)
Max Wa ages Available
175MH (Metal Halide)
150HPS (High Pressure Sodium)
2PLT57 (Compact Fluorescent)
ELECTRICAL:
Select from 120V, 277V, 347V
(consult Solera for addi onal voltages)
Magne c Ballast is standard on most HID lamps. For electronic ballast specify ELB a er the lamp op on.
Electronic Ballast is standard on all LED,
CFL, BIAX and Fluorescent lamps.
LENS/SHIELDING
LPL
PG
Linear Prism Lens with cut off to control up light (standard)
Flat Prisma c Glass Lens
MOUNTING:
CM Surface ceiling mounted to a standard
RT
RT/CX
Recessed in ceiling (non IC)
Recessed in Ceiling with concrete pour
(100W max)
AEL
TP
TS
PC
SF
WG
OPTIONS:
LO Horizontal louver with flat tempered glass lens
Quartz Restrik (relay)
Tamper Proof Hardware
Tamper Proof Screwdriver
Bu on Style Photocell
Single Fuse
Wire Guard
FINISH:
Electrosta cally applied, thermally cured polyester powder coated paint:
BL
WH
BZ
SG
CC
Minitex Black
Minitex White
Minitex Bronze
Silver Gray
Custom Color *Adder
Solera)
(Consult
CONSTRUCTION:
Corrosion resistant cast aluminum/ linear prisma c lens made from UV stabilized polycarbonate providing vandal resistance. Down and out light pa ern minimizes up light. The lens is secured to the housing through stainless steel hardware and sealed with a-channel gasket.
- - - - - - - - - -
NAME LAMPING COLOR
TEMP.
(LED)
48W LED
80IND
175MH
150HPS
2PLT57
WW
NW
CW
VOLT
120V
277V
347V
120/277V
OPTICS
FT
LENS MOUNTING
LPL WM
RT
RT/CX
OPTIONS FINISH
LO
AEL
TP
TS
PC
SF
WG
BL
WH
BZ
SG
CC*
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement