Diesse MINI-CUBE Firmware Upgrade Instructions

Diesse MINI-CUBE Firmware Upgrade Instructions

These firmware upgrade instructions are exclusively for the Diesse MINI-CUBE instrument. The file can be accessed at www.Streck.com on the MINI-CUBE Downloads tab.

1. Save the firmware file to a blank USB flash drive. “Save As” to the appropriate location as the file is not designed to open on a computer.

2. Print any patient or QC files for your records prior to initiating the upgrade. The upgrade may purge all customized settings, QC, and patient file data.

3. Turn the MINI-CUBE off. Adjust the instrument so the back of the unit is readily accessible and plug the

USB flash drive into the USB port.

4. Power the instrument on. The firmware update will quickly proceed.

5. Firmware information can be confirmed by viewing the Settings on the Home Screen. Click on page 2 for

Service settings and the current release version will be displayed.

For assistance with this process or any questions related to the firmware upgrade, please contact Streck Technical

Services at 800.843.0912 x7510, Mon-Fri, 8:00pm-5:00pm CST.

800.843.0912

s t r e c k . c o m

880134

2017-02