advertisement
ProSafe
®
Wireless-N Access Point
WNAP210
Data Sheet
Advanced Speed and Range with Comprehensive Internet Security
• Up to 10x the coverage and 15x the speed of 802.11g networks
• Backward compatible to 802.11g devices while simultaneously providing faster wireless
networking for 802.11n devices
• Security features include WPA, WPA2, rogue AP detection and 802.1x with RADIUS support
• Can run on 802.3af PoE for easy placement in optimal locations- desktop,
wall-mount or ceiling
• Internal antennas for optimized antenna configuration without user guesswork
• Comprehensive SNMP functionality for advanced network management
• Deploy over large areas with point-to-point and point-to-multipoint bridging over large areas
with Wireless Distribution System (WDS)
• Mounting kit provides for wall or ceiling placements
Features
Rogue AP detection
Block SSID Broadcast
Secure SSH Telnet
Secure Socket Layer (SSL) remote management login
Peer-to-peer blocking so users may not accessanother user’s PC
MBSSID/VLAN Support
User Interface Browser-based Interface
Accepts accessory antennas
ProSafe 802.11n
•
•
•
•
•
8/9
•
•
‡ Dual Band
Wireless Access Point
(WNDAP330)
Frequency Band
Maximum theoretical throughput
IEEE 802.3af PoE (Power Over Ethernet)
PoE Power Consumption
Wireless Distribution System (WDS)
Repeater
Point-to-point/multi-point
Simultaneous bridge
& wireless client association
Separate bridge and access point
Client Mode
•
•
•
•
SNMP
Antenna
User support
Security
Wi-Fi Protected Access (WPA/WPA2), 802.11i v1, v2c
Two (2) 5 dBi detachable (2.4GHz and 5.0GHz) and one (1) 3 dBi patch antenna
Up to 50 users
•
Multiple VPN pass-through support
MAC address filtering with access control lists–up to 256 users
802.1x RADIUS support with EAP TLS, TTLS, PEAP
2.4GHz or 5.0GHz
300 Mbps
•
12.7 Watts
•
•
•
ProSafe
Wireless-N Access Point
(WNAP210)
2.4GHz
300 Mbps
•
5.8 Watts
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• v1, v2c
8/9
Internal
Up to 30 users
ProSafe 802.11g
Wireless Access Point
(WG302)
2.4GHz
54 Mbps
•
6 Watts
•
•
•
• v1, v2c
Two (2) 5 dBi detachable
Up to 50 users
•
•
•
•
•
•
•
•
•
8/9
•
•
ProSafe 802.11g
Wireless Access Point
(WG103)
2.4GHz
54 Mbps
•
5 Watts
•
•
•
Future release v1, v2c
One (1) 5 dBi detachable
2.4GHz and 5.0GHz)
Up to 30 users
•
•
•
•
•
•
•
•
8/9
•
•
NETGEAR’s ProSafe line of business networking products offers a wide array of easy-to-use, professional-grade switching, wireless, software and security solutions. Backed by a lifetime hardware warranty for the original purchaser ‡ , ProSafe products provide an abundance of intelligent, innovative and practical features, addressing the unique requirements of business networks.
24 / 7
T E C H N I C A L
S U P P O R T*
1-888-NETGEAR (638-4327)
Email: [email protected]
ProSafe
®
Wireless-N Access Point WNAP210
• Standards
– IEEE 802.11n 2.0 specification, 2.4 GHz
– IEEE 802.11g, IEEE 802.11b, 2.4 GHz
– IEEE 802.3af Power over Ethernet (PoE)
• Physical Specifications
– Dimensions: 223.5 x 153.2 x 28 mm
(8.79 x 6.03 x 1.10 in)
– Weight: .41 kg (.90 lb)
• Physical Interfaces
– One (1) 10/100/1000BASE-T Gigabit
Ethernet (RJ-45) port with Auto
Uplink™ (Auto MDI-X) with IEEE
802.3af Power over Ethernet
(PoE) support
– Power adapter: 12V DC, 1A; plug is localized to country of sale
– Four (4) LEDs: Power, test, LAN, WLAN
• Power
– Power over Ethernet
(PoE consumption: 5.8W)
• Security
– Wi-Fi Protected Access™ (WPA, WPA2)
– Wired Equivalent Privacy (WEP) 64-bit,
128-bit, and 152-bit encryption for
IEEE 802.11b and IEEE 802.11g
– IEEE802.1x RADIUS authentication with EAP TLS, TTLS, PEAP
– Wireless access control to identify authorized wireless network devices
– MAC address authentication
– VPN pass-through support
– Secure SSH telnet
– Secure Sockets Layer (SSL) remote management login
– Ability to configure 8 BSSIDs and 9
VLANs to provide more granular access to the network based upon user type
– Rogue AP detection
• Network Management
– Remote configuration and management through Web browser,
SNMP or telnet with command line interface (CLI)
– SNMP management supports
SNMP MIB I, MIB II, 802.11 MIB and proprietary configuration MIB
• Advanced Wireless Features
– Wireless Distribution System (WDS)
– Point-to-point wireless bridge mode
– Point-to-multipoint wireless bridge mode
– Repeater mode
– Wireless Client mode
– Adjustable transmit power control (TPC)
from 100 mW down to 0 mW
– WMM - Wireless MultiMedia prioritization
System Requirements
– 2.4 GHz 802.11n 2.0 specification adapter or 2.4 GHz 802.11b/g wireless adapter
– Microsoft ® Windows ® Vista™, XP, 2000,
98, Me, Mac ® OS, UNIX ® , or Linux ®
– Internet Explorer ® 6.0 or
Mozilla Firefox 1.5
Package Contents
– ProSafe ® Wireless-N Access Point
(WNAP210)
– Ethernet cable
– Wall-mount kit
– Installation guide
– Resource CD
– 12V, 1A power supply
– Warranty/support information card
Warranty
– Access point: NETGEAR Lifetime
Warranty
– Power supply: NETGEAR 3-year
Warranty
ProSupport Service Packs
Available
• OnCall 24x7, Category 1
– PMB0331-100 (US)
– PMB0331 (non-US)
• XPressHW, Category 1
– PRR0331
Ordering Information
– North America: WNAP210-100NAS
– Europe: WNAP210-100PES
– UK: WNAP210-100UKS
– Asia: WNAP210-100AUS
350 E Plumeria Dr
San Jose, CA 95134 USA
1-888-NETGEAR (638-4327)
E-mail: [email protected]
www.NETGEAR.com
© 2009 NETGEAR, Inc. NETGEAR, the NETGEAR Logo, NETGEAR Digital Entertainer Logo, Connect with Innovation,
FrontView, IntelliFi, PowerShift, ProSafe, ProSecure, RAIDar, RAIDiator, X-RAID, RangeMax, ReadyNAS and Smart Wizard are trademarks of NETGEAR, Inc. in the United States and/or other countries. Mac and the Mac logo are trademarks of Apple
Inc., registered in the U.S. and other countries. Other brand names mentioned herein are for identification purposes only and may be trademarks of their respective holder(s). Information is subject to change without notice. All rights reserved.
*Basic technical support provided for 90 days from date of purchase.
DS-WNAP210-1
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- 2.4 GHz
- Maximum data transfer rate: 300 Mbit/s
- 128-bit WEP, 256-bit WEP, 64-bit WEP, EAP, WPA, WPA2
- Power over Ethernet (PoE)