D-Link DES-1210-28 network switch Datasheet
Add to my manualsadvertisement
DES-1210-28 / 52
Fanless Design
Allows for noiseless operation
Saves energy while lowering costs
Provides continuous, reliable and ecofriendly operation
Security Features
Access Control List secures network
D-Link Safeguard Engine protects CPU from Broadcast/Multicast/Unicast flooding
Port Security supports 64 MACs per port
IP-MAC-Port Binding (DHCP Snooping)*
Intuitive Management
Manage using SmartConsole or webbased GUI
Built-in MIB browser for SNMP
Management
D-View 6.0 module support
Compact CLI through Telnet
VoIP Deployment
Highest priority for VoIP services
Auto Voice VLAN
DSCP QoS
QoS
Ensure time-sensitive data gets delivered efficiently
Supports IEEE 802.1p QoS up to 4 802.1p
Priority Queues
Advanced Features
Loopback Detection auto disables port when loop is detected
Cable Diagnostics allows administrator to determine cable status
Force MDI/MDIX
Trap & Logs
SNMP Trap supports link and STP state change
Trap for SmartConsole Utility
Online Help
Link to local support web site
Downloadable user guide
Real-time manual checks
24/48-Port Web Smart Switch III
D-Link’s DES-1210 Series is the latest generation of Web Smart Switches. Equipped with 24 or 48
10/100Mbps ports, 2 10/100/1000BASE-T ports, and
2 combo 10/100/1000BASE-T/SFP ports, the series integrates advanced management and security functions that provide performance and scalability.
While easy to use, the DES-1210 Series provides a complete and affordable solution for small and medium businesses. Management options for the switches include SNMP, Web Management, SmartConsole
Utility, and Compact Command Lines. The series also supports ACL filtering and D-Link’s Safeguard Engine.
Furthermore, the DES-1210-28/52 uses Auto Voice
VLAN, ensuring higher priority for voice traffic. Both models come with an innovative fanless design in 19” metal cases.
Seamless Integration
The Web Smart Switches are designed to provide
SMB users a complete control over the network.
With Ethernet and Gigabit copper ports capable of connecting to existing Cat.5 twisted-pair cables, these switches eliminate the need for a complex reconfiguration process. The DES-1210 Series allows for flexible connection to a backbone or servers.
Additionally, all ports support auto-negotiation of
MDI/MDIX crossover, or configurable auto MDI and therefore do away with crossover cables or uplink ports. This brings inexpensive and easy connectivity to your desktop.
Extensive Layer 2 Features
Equipped with a complete lineup of L2 features, these switches include IGMP Snooping, Port Mirroring,
Spanning Tree and Link Aggregation Control Protocol
(LACP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection and Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port and automatically shut down the affected port. Cable
Diagnostics is designed for network administrators to quickly examine the quality of the copper cables and also determine the type of cable error.
QoS, Bandwidth Control
The switches are perfect for deployment in a VoIP environment, as they support Auto Voice VLAN and
Differentiated Services Code Point (DSCP) QoS for
VoIP application. Auto Voice VLAN will automatically place voice traffic from an IP phone to an assigned
VLAN and by doing so enhance the VoIP service. With a higher priority and individual VLAN, this feature guarantees the quality and security of VoIP traffic.
DSCP marks parts of an IP packet, enabling different levels of service to be assigned for network traffic.
With Bandwidth Control, the network administrator can reserve bandwidth for important functions that require a larger bandwidth or might have high priority.
Secure your Network
D-Link’s innovative Safeguard Engine function protects the switches against traffic flooding caused by virus attacks. The switches support 802.1X portbased authentication, allowing the network to be authenticated through external RADIUS servers.
In addition, the Access Control List (ACL) feature enhances network security and helps to protect the internal IT network. With the IP-MAC-Port Binding
(DHCP Snooping) feature, the switch snoops DHCP information in order to automatically learn IP-MAC-
Port Binding pairs and create a white list. Whenever cyber crime or hacking attempts are found, the IP change is kept under control and the location of the
IP address becomes traceable. For added security, the DHCP Server Screening feature screens rogue
DHCP server packets from user ports to prevent unauthorized IP assignment.
Versatile Management
The new generation of Web Smart Switches provides growing businesses simple and easy management of their network using an intuitive SmartConsole utility or a web-based management interface that enables administrators to remotely control their network down to the port level. The SmartConsole easily allows customers to discover multiple D-Link Web Smart
Switches within the same L2 network segment. With this utility, users do not need to change the IP address of their PC and it also provides an easy initial setting of the Smart Switches. Switches within the same L2 network segment that are connected to the user’s local PC are displayed on screen for instant access.
This allows extensive switch configuration settings and basic configuration of discovered devices such as password changes and firmware upgrades.
The DES-1210 Series also supports D-View 6.0 and
Compact Command Line Interface (CLI) through
Telnet. D-View 6.0 is a Network Management
System that allows for the central management of critical network characteristics such as availability, reliability, resilience, and security in a consistent way.
D-View 6.0 provides a useful set of tools for network administrators who want to effectively manage device configurations, fault tolerance, performance, and security. CLI management of the switches is possible via Telnet. This makes the adjustment of basic settings like password changes or firmware and configuration file uploads possible.
* Available in future release
01
24/48-Port Web Smart Switch III
Technical Specifications
General
Port Standards & Functions
Number of Ports
Network Cables
Full/Half Duplex
Media Interface Exchange
Performance
Switching Capacity
Transmission Method
MAC Address Table
MAC Address Update
Maximum 64 bytes packet forwarding rate
RAM Buffer
Physical & Environmental
AC Input
Maximum Power Consumption
Standby Power Consumption
Fan Quantity
Acoustics
Heat Dissipation
Operating Temperature
Storage Temperature
Operating Humidity
IEEE 802.3 10BASE-T Ethernet (twisted-pair copper)
IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper)
IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted- pair copper)
IEEE 802.3z Gigabit Ethernet (fiber) ANSI/IEEE 802.3
Auto-negotiation
IEEE 802.3x Flow Control
DES-1210-28: 24 10/100Mbps, 2 10/100/1000BASE-T, 2 combo 10/100/1000BASE-T/SFP
DES-1210-52: 48 10/100Mbps, 2 10/100/1000BASE-T, 2 combo 10/100/1000BASE-T/SFP
UTP Cat. 5, Cat. 5e (100 m max.)
EIA/TIA-568 100-ohm STP (100 m max.)
Full/half duplex for 10/100Mbps speeds
Full duplex for Gigabit speed
Auto MDI/MDIX adjustment for all twisted-pair ports
DES-1210-28: 12.8Gbps
DES-1210-52: 17.6Gbps
Store-and-forward
8K entries per device
Up to 256 static MAC entries
Enable/disable auto-learning of MAC addresses
DES-1210-28: 9.5 Mpps
DES-1210-52: 3.1 Mpps
DES-1210-28: 512KB per device
DES-1210-52: 1MB per device
100 to 240 VAC 50/60Hz internal universal power supply
DES-1210-28: 17.6W
DES-1210-52: 28.9W
DES-1210-28: 7.6W/110V, 7.9W/240V
DES-1210-52: 13.2W/110V, 13.3W/240V
DES-1210-28: 0
DES-1210-52: 0
DES-1210-28: 0dBA
DES-1210-52: 0dBA
DES-1210-28: 60.05 BTU/hr
DES-1210-52: 98.61 BTU/hr
0˚ to 40˚ C
-10˚ to 70˚ C
10% to 95% non-condensing
DES-1210-28 / 52
02
DES-1210-28 / 52
24/48-Port Web Smart Switch III
Storage Humidity
Dimensions
Weight
Diagnostic LEDs
Emission (EMI)
MTBF
Safety
5% to 95% non-condensing
DES-1210-28: 440 mm x 210 mm x 44mm
DES-1210-52: 441 mm x 250 mm x 44 mm
19-inch standard rack mounting width, 1U height
DES-1210-28: 2.6 kg
DES-1210-52: 3.3 kg
Power (Per device)
Link/Activity/Speed (Per 10/100/1000Mbps port)
Link/Activity/Speed (Per 10/100Mbps port)
Link/Activity/Speed (Per SFP port)
FCC Class A
CE Class A
VCCI Class A
C-Tick
DES-1210-28: 419,467hrs
DES-1210-52: 289,012hrs cUL, LVD
L2 Features
MAC Address Table
DES-1210-28: 8K
DES-1210-52: 8K
Flow Control
802.3x Flow Control
HOL Blocking Prevention
IGMP Snooping
IGMP v1/v2 Snooping
Support 256 IGMP groups
Supports at least 64 static multicast addresses
IGMP per VLAN
Supports IGMP Snooping Querier
Spanning Tree Protocol
802.1D STP
802.1w RSTP
Loopback Detection
802.3ad Link Aggregation
DES-1210-28:
Max. 8 groups per device/8 ports per group
DES-1210-52:
Max. 8 groups per device/8 ports per group
Port Mirroring
* Available in future release
Software Features
One-to-One
Many-to-One
Supports Mirroring for Tx/Rx/Both
Cable Diagnostics
Configurable Auto MDI/MDIX
Multicast Filtering *
Forwards all groups
Forwards all unregistered groups
Filters all unregistered groups
VLAN
802.1Q
VLAN Group
Max. 256 static VLAN groups
Max. 4094 VIDs
Management VLAN
Asymmetric VLAN
Auto Voice VLAN
Max. 10 user defined OUI
Max. 8 default OUI
QoS (Quality of Service)
802.1p Quality of Service
4 queues per port
Queue Handling
Strict
Weighted Round Robin (WRR)
CoS based on
802.1p Priority Queues
DSCP
Bandwidth Control
Port-based (Ingress/Egress, min. granularity
64Kb/s)
Access Control List (ACL)
Max. 50 profiles
Max. 240 rules shared by profiles
ACL based on
MAC Address
IPv4 Address (ICMP/IGMP/TCP/UDP)
ACL Actions
Permit
Deny
03
DES-1210-28 / 52
24/48-Port Web Smart Switch III
Security
802.1X
Port Security
Supports up to 64 MAC addresses per port
Broadcast/Multicast/Unicast Storm Control
IP-MAC-Port Binding
DHCP Snooping*
Static MAC
D-Link Safeguard Engine
DHCP Server Screening *
ARP Spoofing Prevention *
Max. 64 entries
SSL *
Supports v1/v2/v3
Supports IPv4
* Available in future release
Optional SFP Transceivers
DEM-310GT
DEM-311GT
1000BASE-LX, Single-mode, 10km
1000BASE-SX, Multi-mode, 550m
DEM-312GT2 1000BASE-SX, Multi-mode, 2km
DEM-314GT 1000BASE-LX, Single-mode, 50km
DEM-315GT
DEM-210
1000BASE-LX, Single-mode, 80km
100BASE-FX, Single-mode, 15km
DEM-211 100BASE-FX, Multi-mode, 2km
MIB
MIB II
Bridge MIB
SNMPv2 MIB
MIB Traps Convention
Interface Group MIB
Private MIB
Management
Web-based GUI
Compact CLI through Telnet
Telnet Server
TFTP Client
SNMP
Supports v1/v2/v3*
SNMP Trap
Trap for SmartConsole Utility
System Log
Max. 500 log entries
Supports IPv4 log server
BootP/DHCP Client
Time Setting
SNTP
Optional Products
Optional WDM SFP Transceivers
DEM-220T
DEM-220R
DEM-330T
DEM-330R
100BASE-BX, Wavelength Tx:1550nm
Rx:1310nm, Single-mode, 20km
100BASE-BX, Wavelength Tx:1310nm
Rx:1550nm, Single-mode, 20km
1000BASE-LX, Wavelength Tx:1550nm
Rx:1310nm, Single-mode, 10km
1000BASE-LX, Wavelength Tx:1310nm
Rx:1550nm, Single-mode, 10km
DEM-331T
DEM-331R
1000BASE-LX, Wavelength Tx:1550nm
Rx:1310nm, Single-mode, 40km
1000BASE-LX, Wavelength Tx:1310nm
Rx:1550nm, Single-mode, 40km
C US
I
ACN 052 202 838
D-Link Corporation
No. 289 Xinhu 3rd Road, Neihu, Taipei 114, Taiwan
Specifications are subject to change without notice.
D-Link is a registered trademark of D-Link Corporation and its overseas subsidiaries.
All other trademarks belong to their respective owners.
©2009 D-Link Corporation. All rights reserved.
Release 06 (September 2009)
04
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- Managed L2 Web-based management
- Quality of Service (QoS) support
- Basic switching RJ-45 Ethernet ports quantity: 24
- 1000BASE-T, 100BASE-TX, 10BASE-T
- MAC address table: 8000 entries Switching capacity: 12.8 Gbit/s
- Access Control List (ACL)
- 1U Rack mounting