- Computers & electronics
- Data storage
- Data storage devices
- NAS & storage servers
- Fujitsu
- FTS:ET06L12AG
- Data Sheet
advertisement
DATASHEET FUJITSU ETERNUS DX60 DISK STORAGE SYSTEM
DATASHEET
FUJITSU ETERNUS DX60
DISK STORAGE SYSTEM
THE DATA SAFE
ETERNUS DX - THE DATA SAFE
ETERNUS DX disk storage systems - the most reliable and secure data safes:
For small and medium-sized businesses, ETERNUS
DX60, DX80, and DX90 provide fast and highly available data. For mid-range and enterprise customers who need secure and flexible integration into the data center, Fujitsu offers the ETERNUS
DX400 series and ETERNUS DX8000 series.
ETERNUS DX disk storage systems use the same software stack and hardware functions across the entire range to allow ease-of-use and greater efficiency for users.
ETERNUS SF - Fujitsu's Storage Management
Software - reduces total cost of ownership by simplifying the monitoring and management of
ETERNUS DX disk storage systems. Furthermore it helps to achieve business continuity by leveraging the Advanced Copy functions for data backup, using snapshots and clones. Altogether, with ETERNUS SF, storage resources in complex IT environments are optimized.
As one of the world's largest IT services companies,
Fujitsu combines many years of experience in complex data centers to offer tailor-made solutions that perfectly fit customers' individual requirements.
Moreover, Fujitsu is one of the few global players to provide flexible infrastructures with its Dynamic
Infrastructures strategy: server, storage, networking and service solutions - all from one trusted partner.
ETERNUS DX60
Fujitsu ETERNUS DX60 is a new generation of entry level disk storage systems with enterprise class reliability. Easy to install, configure, operate and maintain, they integrate well with host operating systems, multi-vendor servers, network infrastructures and backup solutions.
ETERNUS DX60 disk storage systems flexibly scale to
48 terabyte with 24 drives. Different models can either be attached to hosts via Fibre Channel, iSCSI or SAS connections.
ETERNUS DX60 base units support 12x 3.5” drives per 2U rack shelf. Alternative base units of the
FC-attached models can be equipped with 24x 2.5” drives per 2U shelf to reduce power consumption and space requirements.
Backup copies are always at hand via the included eight snapshots and clones, which can be optionally upgraded to 512.
ETERNUS SF Express management software, provided with ETERNUS DX60, simplifies the monitoring, management and copying methods of multiple ETERNUS DX disk storage systems from a central console.
Page 1 of 6 www.fujitsu.com/eternus/
DATASHEET FUJITSU ETERNUS DX60 DISK STORAGE SYSTEM
FEATURES AND BENEFITS
MAIN FEATURES
QUALITY AND RELIABILITY
Redundant hot swappable RAID controllers, fans and power supplies
Cache Protector uses maintenance-free capacitor technology
Redundant Copy rebuilds a disk automatically as soon as the first signs of failure appear
Data Block Guard appends check codes to every data block and verifies them at multiple checkpoints
RAID Migration enables LUNs to be moved dynamically between different
RAID groups and disk drives without interrupting operations
Mixed SAS and Nearline SAS disk drives
INNOVATION AND FLEXIBILITY
Latest technologies and improved RAID Controller
Fibre Channel or iSCSI or SAS host connection
8 snapshots (standard) upgradeable to 512
Eco-mode spins down idle disk drives
EASE-OF-USE
Intuitive web interface
Storage management software ETERNUS SF Express is bundled
VERSATILITY AND INTEROPERABILITY
Alternative base units of the FC-attached models can be equipped with 2.5 inch drives
A wide range of Operating Systems, servers as well as applications is supported
BENEFITS
For highest 99.99% availability
Protects the RAID controller cache during power outages and returns the array to high performance mode within minutes following restore
Dramatically reduces recovery times and minimizes the risk of permanent data loss during recovery
Helps to ensure maximum data integrity on the drives and in cache
Supports Information Lifecycle Management with different service levels from frequently accessed data to online backup
Serves all main performance and capacity requirements
For highest performance
Flexibly connects to hosts and networks
For business continuity and data protection
Reduces energy consumption and heat dissipation
Easy to install and operate
Simplifies storage monitoring and management
Disk storage tailored to application and space requirements with optimum power consumption and space requirements
Reliable and easy database operation, storage consolidation, clustering, tiered storage, backup-to-disk and many other usage scenarios
Page 2 of 6 www.fujitsu.com/eternus/
DATASHEET FUJITSU ETERNUS DX60 DISK STORAGE SYSTEM
QUALITY AND RELIABILITY
ETERNUS DX60 offers entry level solutions with the same non-stop robustness and redundant hot-pluggable components (power supplies, fans, RAID controllers) as much larger systems.
Different drive types can be mixed and matched. All the relevant RAID levels (0, 1,
ETERNUS DX60 is equipped with 8 snapshot sessions. Using the Graphical User
Interface (GUI) or Command Line Interface (CLI), they enable planning of the required quantity of copy sessions as well as testing of copying functions. Once a copy license is purchased, snapshots can be extended to 512 sessions.
ETERNUS DX60 is a leading energy-efficient storage system. In Eco-mode, which
1+0, 5, 5+0 and 6) are available so that data can be protected in a flexible manner to meet reliability and security requirements. Furthermore, the RAID
Migration feature can be used to dynamically move data between different RAID groups and drives without interrupting operations. This allows data to be moved to fast SAS disk drives or high-capacity Nearline SAS disk drives according to its access frequency and importance.
With higher capacities of Nearline SAS disk drives, recovery times following a uses MAID (Massive Array of Idle Disks) technology, it requires even less energy and produces less heat as disk drives not in use can stop rotation. In backup-to-disk environments, drives used for nightly backup can be spun down during daily operations. This contributes significantly to system and data center efficiency.
EASE-OF-USE drive failures are increasing. This increases the risk that another drive will fail before the first has been recovered. It can take a number of days to rebuild a 2 terabyte disk drive in a RAID 5 configuration. "Redundant Copy” starts the rebuild procedure as soon as the first signs of failure appear. This dramatically minimizes the risk of permanent data loss during the recovery action.
ETERNUS DX60 protects data on the disk drives not only via RAID but also via the
Data Block Guard. This function appends a check code in every data block and verifies it at multiple checkpoints. This improves data integrity both on the drives and in the cache. Should data corruption occur, the system can detect the error and guarantee the consistency of stored data.
Using Data Encryption, no unauthorized access is possible when drives are removed from the storage system. This feature can be activated if required and is only available in countries where encryption of data is permitted.
Installation is quite simple. The management software - with its graphical user interface and installation wizard - is designed for easy intuitive operation and comes pre-installed on each system. Day to day operation management of
ETERNUS DX60 is very straight forward. Firmware upgrades can also be carried out - usually without any operational interruptions.
With ETERNUS SF Express already bundled for simplified storage system management and maintenance, monitoring multiple ETERNUS DX disk storage systems from the one centralized console is no problem. In addition it manages the Advanced Copy functions within the storage system making snapshots and clones an easy task, through one combined management console.
VERSATILITY AND INTEROPERABILITY
ETERNUS DX60 is also equipped with state-of-the-art Cache Protector. Instead of traditional batteries, it uses capacitors to write the contents of the RAID controller cache to flash memory in the event of power failure and to ensure that no data is lost. The power generated by the capacitor is sufficient for the data backup.
When power supply is restored, the cache can be restored very quickly as capacitors recharge a lot faster than batteries. The capacitors used in ETERNUS
DX90 do not need as much maintenance and have a longer lifespan than batteries frequently used in other systems.
At just 2U height and with a capacity of 12 drives in 3.5 inch format, ETERNUS
DX60 flexibly scales from 600GB to 48TB. An alternative FC base model is available for a maximum of 24x 2.5 inch drives. With 2.5 inch drives the maximum storage capacity of each system is limited to 7.2 Terabytes.
ETERNUS DX60 is suitable for a broad range of uses, including high-availability solutions. Examples are: Microsoft Cluster Server, x10sure or ServerView
Resource Coordinator VE, storage consolidation, critical company applications, such as databases or e-mail, archiving and backup-to-disk. ETERNUS DX60 is also ideal for use in the virtual server environments of VMware vSphere, Citrix and
Microsoft Hyper-V.
INNOVATION AND FLEXIBILITY
With three different base models, ETERNUS DX60 can connect to hosts either via
Fibre Channel, iSCSI or SAS using either single or dual controllers with 1GB of each cache. Online upgrades from single to dual controller configurations are possible. With two Fibre Channel controllers, a maximum of 64 hosts can be connected in Storage Area Networks (SAN). In contrast, the iSCSI models enable
SAN functionality via the well-known Internet Protocol which requires no investment in new IT infrastructure and training. In comparison the SAS models directly connect to servers so that very low-priced cluster configurations can be implemented.
With Advanced Copy functions, a business data volume can be copied to a separate copy volume, within the disk storage system, at any point in time. Once the copy is completed, the copy volume can be separated from the business volume. This allows easy backup to a tape device, as using the point in time copy allows ongoing normal operations on the business data.
Page 3 of 6 www.fujitsu.com/eternus/
DATASHEET FUJITSU ETERNUS DX60 DISK STORAGE SYSTEM
TECHNICAL DETAILS
GENERAL SPECIFICATION 3.5” BASE MODEL 2.5” BASE MODEL
SINGLE CONTROLLER DUAL CONTROLLER SINGLE CONTROLLER DUAL CONTROLLER
CPU Frequency
RAID Levels
Host Interfaces
0, 1, 1+0, 5, 5+0, 6
Number of controllers
Number of host interfaces
Number of hosts
Cache memory capacity
Number of drive enclosures
Number of drives
Storage capacity
Drives 3.5-inch
Fibre Channel
Physical capacity
SAS disk drives
Nearline SAS disk drives iSCSI (1Gbit/s)
SAS (3Gbit/s)
1 GB
Max. 1 (3.5” only)
Max. 4
2 GB
Fibre Channel (4/2/1Gbit/s)
1 2 1 2
2 4 2 4
Max. 32 Max. 64
Max. 64
Max. 32 n/a
Max. 64 n/a n/a
1 GB n/a n/a
2 GB
2 - 24
Max. 48.0 TB
Max. 33.8 TB
Max. 14.4 TB
Max. 10.1 TB n/a n/a
2.5-inch SAS disk drives
Drive interface
No
Serial Attached SCSI (3Gbit/s)
Yes No Yes
Fan Yes Yes Yes Yes
Number of Snapshots
- Note
Standard (built-in)
Yes Yes Yes Yes
8
512
Snap/Clone License must be purchased to maximize the number of Snapshots
No Remote Copy feature
INSTALLATION SPECIFICATION 3.5” BASE MODEL 2.5” BASE MODEL
Dimensions (W x D x H)
Service Area
Standard
Front
483 x 650 x 88mm (19 x 25.5 x 3.5 inch) [2U] n/a
800 mm (31.5 inch) or more
800 mm (31.5 inch) or more Rear
Maximum Weight 70 kg (35 kg per single enclosure)
155 lb (77.2 lb per single enclosure)
Power Voltage
35 kg (35 kg per single enclosure)
77.2 lb (77.2 lb per single enclosure)
AC 100 – 120 V / AC 200 – 240 V
Frequency
Maximum Power Consumption
Maximum Heat Generation
- Notes
Environmental Conditions
AC 100 - 120V
AC 200 - 240V
AC 100 - 120V
AC 200 - 240V
Temperature (Operating)
800 W (800 VA)
790 W (800 VA)
50 Hz / 60 Hz
470 W (470 VA)
460 W (480 VA)
2880 kJ/h (2730 BTU/h)
2844 kJ/h (2696 BTU/h)
1692 kJ/h (1604 BTU/h)
1656 kJ/h (1570 BTU/h)
Max. Power Consumption and Heat Generation for 2.5” base models apply for configurations with only 2.5” drives
5 – 40°C (41 – 104°F)
20 – 80% RH
3000 m (9842 ft.) Altitude
Page 4 of 6 www.fujitsu.com/eternus/
DATASHEET FUJITSU ETERNUS DX60 DISK STORAGE SYSTEM
SUPPORTED RAID LEVELS
RAID 0
RAID 1
RAID 1+0
RAID 5
RAID 5+0
RAID 6
Data striping on several disk drives
Mirrored disk drives
Data mirroring, then striping of the data over several disk drives
Striping with distributed parity
RAID 5 arrays, striped again over several drives
Striping with distributed double parity
MANAGEMENT
Interfaces
Supported protocols
Administration
Ethernet (1000 Base-T / 100 Base-TX / 10 Base-T)
SNMP (version1), SMI-S 1.2
Web-Environment, CLI (Command Line Interface), ETERNUS SF Express
SUPPORTED OS FOR ETERNUS SF EXPRESS
Operation Management Server
Microsoft® Windows Server® 2008 R2 Enterprise (64-bit)
Microsoft® Windows Server® 2008 R2 Datacenter (64-bit)
Microsoft® Windows Server® 2008 Standard without Hyper-VTM (32-bit)(64-bit)
Microsoft® Windows Server® 2008 Enterprise without Hyper-VTM (32-bit)(64-bit)
Microsoft® Windows Server® 2008 Datacenter without Hyper-VTM (32-bit)(64-bit)
Microsoft® Windows Server® 2008 Standard (32-bit)(64-bit)
Microsoft® Windows Server® 2008 Enterprise (32-bit)(64-bit)
Microsoft® Windows Server® 2008 Datacenter (32-bit)(64-bit)
Microsoft® Windows Server® 2003 R2, Standard Edition
Microsoft® Windows Server® 2003 R2, Enterprise Edition
Microsoft® Windows Server® 2003 R2, Standard x64 Edition
Microsoft® Windows Server® 2003 R2, Enterprise x64 Edition
Microsoft® Windows Server® 2003, Standard Edition
Microsoft® Windows Server® 2003, Enterprise Edition
Microsoft® Windows Server® 2003, Standard x64 Edition
Microsoft® Windows Server® 2003, Enterprise x64 Edition
NOISE EMISSION
Sound Power Level (LWAd)
Sound Pressure Level (LpAm)
- Notes
3.5” BASE MODEL
5.9 B
42.0 dB(A)
2.5” BASE MODEL
6.0 B
43.5 dB(A)
measured with single enclosure according to ISO7779 and declared according to ISO9296
SUPPORTED CONFIGURATIONS
A wide range of host operating systems, servers as well as applications is supported.
For a detailed support matrix check: http://www.fujitsu.com/global/services/computing/storage/eternus/products/diskstorage/dx-entry/supported-device/
COMPLIANCE WITH STANDARDS
Product safety
Electromagnetic Compatibility
Electromagnetic Immunity
CE certification
Environmental compliance
- Notes
UL60950-1, CSA-C22.2 No. 60950-1, EN60950-1, IEC60950-1, GOST-R
CNS13438(C6357) Class A, FCC CFR47 part 15 Class A, ICES-003 Class A,
EN55022 Class A, VCCI Class A, AS/NZS CISPR22 Class A
EN55024
Electromagnetic Compatibility Directive 2004/108/EC
Low Voltage Directive 2006/95/EC
RoHS-compliant (Restriction of hazardous substances)
WEEE-compliant (Waste electrical and electronic equipment)
There is general compliance with the safety requirements of all European countries and North
America. National approvals required in order to satisfy statutory regulations or for other reasons can be applied for on request.
Compliance link
Page 5 of 6 www.fujitsu.com/eternus/
DATASHEET FUJITSU ETERNUS DX60 DISK STORAGE SYSTEM
FUJITSU PLATFORM SOLUTIONS
In addition to Fujitsu ETERNUS DX60, Fujitsu provides a range of platform solutions. They combine reliable Fujitsu products with the best in services, know-how and worldwide partnerships.
Dynamic Infrastructures
With the Fujitsu Dynamic Infrastructures approach,
Fujitsu offers a full portfolio of IT products, solutions and services, ranging from clients to datacenter solutions, Managed Infrastructure and
Infrastructure-as-a-Service. How much you benefit from Fujitsu technologies and services depends on the level of cooperation you choose. This takes IT flexibility and efficiency to the next level.
Computing Products www.fujitsu.com/global/services/computing/
- PRIMERGY: Industrial standard server
- SPARC Enterprise: UNIX server
- PRIMEQUEST: Mission-critical IA server
- ETERNUS: Storage system
Software www.fujitsu.com/software/
- Interstage: Application infrastructure software
- Systemwalker: System management software
MORE INFORMATION
Learn more about Fujitsu ETERNUS DX60, please contact your Fujitsu sales representative, Fujitsu business partner, or visit our website. www.fujitsu.com/eternus/
FUJITSU GREEN POLICY INNOVATION
Fujitsu Green Policy Innovation is our worldwide project for reducing burdens on the environment.
Using our global know-how, we aim to resolve issues of environmental energy efficiency through
IT. Please find further information at: www.fujitsu.com/global/about/environment/
COPYRIGHT
© Copyright 2010 Fujitsu Technology Solutions
GmbH. Fujitsu and the Fujitsu logo are trademarks or registered trademarks of Fujitsu Limited in
Japan and other countries. Other company, product and service names may be trademarks or registered trademarks of their respective owners.
DISCLAIMER
Technical data subject to modification and delivery subject to availability. Any liability that the data and illustrations are complete, actual or correct is excluded. Designations may be trademarks and/or copyrights of the respective manufacturer, the use of which by third parties for their own purposes may infringe the rights of such owner.
CONTACT
FUJITSU Limited
Website: www.fujitsu.com/eternus/
2010-09-01 WW-EN
Page 6 of 6 www.fujitsu.com/eternus/
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- Total installed storage capacity: 1.2 TB Number of storage drives supported: 12
- 0.8 GHz
- iSCSI support