Lucasey THIL200A

THIL200A INSTALLATION INSTRUCTIONS

Monitor Attaching

Screws

THIL200A

Adjustable Height Wall Plate Hook Mount

for up to 50lbs Flat Screens with 200mm or 100mm Mounting Patterns

Flat Washers

Monitor Not Included

These instructions do not include installing the hook style wall plate

1. Attach the 200mm VESA Plate to the back of the monitor with screws that are appropriate for the threaded inserts on the monitor.

An assortment of monitor attachment screws are provided. Check with the monitor manufacturer to make sure that these are the correct size and length of screws.

2. Hook the mount with the monitor onto the wall plate. If available on the wall plate, secure the hook in place with the locking screw on the wall plate.

3. Adjust the viewing angle and tighten the 1/4-20 socket head screw to fix the monitor in the desired viewing angle.

4. If height adjustment is needed, loosen the top 5/8" Hex Nut, and adjust to the height desired. Tighten the bottom nut until the U-Hook with Square Tubing is tightly clamped between the two 5/8" Hex Nuts.

Warning! Do not leave the 5/8" Hex Nuts for Height Adjustment loose.

The THIL200A is shipped with these nuts tight. If the height is adjusted, the nuts need to be tightened again.

Item List & Assembly Hardware

2 ...

2 ...

1 ...

1 ...

1 ...

2 ...

1 ...

1 ...

2 ...

2 ...

1 ...

2 ...

U-Hook with Square Tubing (04-00462760)

5/8" Hex Nuts for Height Adjustment (06-40115818)

200mm VESA plate (T#1794)

5/16-18 x2" Button Socket Head Screw (06-10831205)

5/16" Bellville Washer (06-32585160)

5/16" Flat Washer (06-31010517)

5/16" Nylok Nut (06-40253127)

1/4-20 x2" Button Socket Head Screw (06-10825240)

1/4" Bellville Washer (06-32581425)

1/4" Flat Washer (06-30101316)

1/4"-20 Nylok Nut (06-40252521)

1/2" Black Blastic Cap (09-0511214)

Monitor Attaching Hardware

4 ...

4 ...

4 ...

4 ...

4 ...

4 ...

4 ...

4 ...

M6 x 12mm Phillips Machine Screws (06-12410612)

M4 x 12mm Phillips Machine Screws (06-12410412)

1/4" (M6) SAE Flat Washers (06-30101316)

M5 Flat Fender Washers (06-30150000)

M6 x 30mm Setscrews (06-10800630)

M4 x 25mm Setscrews (06-10800425)

M6 Hex Nuts (06-40110060)

M4 Hex Nuts (06-40110040)

THIL200A (8/13) ©2013 Lucasey Manufacturing Corporation, Oakland, California www.lucasey.com

Protected under one or more of these U.S. Patent numbers: 3,291,432 3,559,942 3,724,798 DES.270,689 4,613,109 4,878,645 4,852,842 DES.309,5624,973,023 5,169,114 5,255,884 5,310,152 5,522,576 5,621,614 Re.35,677 DES.398,834 5,826,384 5,941,492 5,964,068 6,060,661 6,102,398 6,158,704 6,454,116B1 6,761,276B2 6,806,425B1