HT304SL-DH_BGBRLL_ENG_4503
8/14/09
9:58 AM
Page 1
Model : HT304SU (HT304SU-DH, SH34SL-S/W)
HT304SQ (HT304SQ-DH, SH34SQ-S/W)
Full HD up-scaling (1080p)
(Go to page 6)
Portable In
(Go to page 15)
USB Direct Recording
(Go to page 16)
FOR THE WARRANTY TERMS & CONDITIONS, PLEASE REFER TO BACK COVER OF THIS MANUAL.
As an ENERGY STAR® Partner,
LG has determined that this
product or product models meet
the ENERGY STAR® guidelines for
energy efficiency.
ENERGY STAR® is a U.S. registered mark.
P/NO : MFL61944503
HT304SL-DH_BGBRLL_ENG_4503
8/14/09
9:58 AM
Page 2
Safety Precaution
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
CAUTION : The apparatus shall not be exposed to water (dripping or splashing) and
no objects filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit ;
That is, a single outlet circuit which powers only that appliance and has no additional
outlets or branch circuits. Check the specification page of this owner's manual to be
certain.
This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets,
extension cords, frayed power cords, or damaged or cracked wire insulation are
dangerous. Any of these conditions could result in electric shock or fire. Periodically
examine the cord of your appliance, and if its appearance indicates damage or
deterioration, unplug it, discontinue use of the appliance, and have the cord replaced
with an exact replacement part by an authorized service center.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.
Protect the power cord from physical or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the appliance.
WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNING : Do not install this equipment in a confined space such as a book case or
similar unit.
CAUTION : This product employs a Laser System.
To ensure proper use of this product, please read this owner’s
manual carefully and retain it for future reference. Shall the unit
require maintenance, contact an authorized service center.
Use of controls, adjustments or the performance of procedures
other than those specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure. Visible
laser radiation when open. DO NOT STARE INTO BEAM.
To disconnect power from the mains, pull out the mains cord plug. When installing the
product, ensure that the plug is easily accessible.
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product it
means the product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately from
the municipal waste stream via designated collection facilities appointed by
the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential
negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance, please
contact your city office, waste disposal service or the shop where you
purchased the product.
This product is manufactured to comply with EMC Directive
2004/108/EC and Low Voltage Directive 2006/95/EC.
European representative :
LG Electronics Service Europe B.V.
Veluwezoom 15, 1327 AE Almere, The Netherlands
(Tel : +31-036-547-8940)
2
HT304SL-DH_BGBRLL_ENG_4503
8/14/09
9:58 AM
Page 3
Welcome to your new DVD Receiver
Contents
Setting up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Hooking up the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
OSD Initial language settings - Optional . . . . . . . . . . . . . . . .8
Initial Setting the Area Code - Optional . . . . . . . . . . . . . . . . .8
Adjusting the general settings . . . . . . . . . . . . . . . . . . . . .8-10
5.1 Speaker Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Enjuying a pre-programmed sound field . . . . . . . . . . . . . . .10
Displaying Disc Information . . . . . . . . . . . . . . . . . . . . . . . . .11
Playing a disc or file . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-13
Viewing photo files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Listening to the radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Using an USB device . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Listening to music from your portable player or external
device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Recording to USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Language Codes . . . . .
Area Codes . . . . . . . . .
Troubleshooting . . . . . .
Types of Playable Discs
Specifications . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.17
.17
.18
.19
.20
POWER: This unit operates on a mains supply of 200-240V~, 50/60Hz.
WIRING: This unit is supplied with a BSI 1363 approved 13 amp mains
plug, fused at 5 amp. When replacing the fuse always use a 5 amp BS
1362, BSI or ASTA approved type. Never use this plug with the fuse
cover omitted. To obtain a replacement fuse cover contact your dealer. If
the type of plug supplied is not suitable for the mains sockets in your
home, then the plug should be removed and a suitable type fitted.
Please refer to the wiring instructions below:
WARNING: A mains plug removed from the mains lead of this unit must
be destroyed. A mains plug with bared wires is hazardous if inserted in a
mains socket.
Do not connect either wire to the earth pin, marked with the letter E or
with the earth symbol
or coloured green or green and yellow. If any
other plug is fitted, use a 5 amp fuse, either in the plug, or at the
distribution board.
IMPORTANT: The wires in this mains lead are coloured in accordance
with the following codes:
- BLUE: NEUTRAL, BROWN: LIVE - As the colours of the wires in the
mains lead of this unit may not correspond with the coloured marking
identifying the terminals in your plug, proceed as follows: The wire which
is coloured blue must be connected to the terminal which is marked with
the letter N or coloured black. The wire which is coloured brown must be
connected to the terminal which is marked with the letter L or coloured
red.
3
HT304SL-DH_BGBRLL_ENG_4503
8/14/09
9:58 AM
Page 4
Setting up
Main Unit
Attaching the speakers to the DVD receiver
a
1
2
3
4
5
6 7
8
You will have received six speaker cables.
Each one is colour-coded by a band near each end and connects one of
the six speakers to the DVD receiver.
b
Connect the wires to the DVD receiver.
To connect the cable to the DVD receiver, press each plastic finger pad to
open the connection terminal. Insert the wire and release the finger pad.
11 10
9
1/`` )
1 Power (1
Turns the unit on and off.
2 DVD/CD Disc Drawer
3 Volume (VOL.)
Controls the volume when using any function.
Connect the black end of each wire to
the terminals marked -(minus) and the
other end to the terminals marked +
(plus).
4 Display window
Z)
5 Open/Close (Z
Main Unit
SPEAKER
REAR R
R.R
Behind you and to your right.
REAR L
R.L
Behind you and to your left.
CENTER
C
Above screen, directly in front of you.
SUB WOOFER
W
FRONT R
F.R
FRONT L
F.L
This can be placed in any front position.
In front of you, to the right of the
screen.
In front of you, to the left of the
screen.
POSITION
B/X
X)
6 Play/Pause(B
x)
7 Stop (x
Be careful of the following
Be careful to make sure children do not put their hands or any objects into the
*speaker duct.
*Speaker duct : A hole for plentiful bass sound on speaker cabinet(enclosure).
4
8 Function (F)
Selects the function and input source.
(DVD/CD, USB, AUX, TV-AUDIO, PORTABLE, FM)
.> ), Skip/Search (Press and hold)
9 TUNING (-/+) (.
10 USB port
You can play video, image and sound files by connecting the USB
device.
11 PORT.(Portable) IN port
You can enjoy music from portable device on your unit.
HT304SL-DH_BGBRLL_ENG_4503
8/14/09
9:58 AM
Page 5
Hooking up the unit
a Connect jacks on the unit and your TV (DVD player or Digital Device etc.) using the cables.
Check the jacks of your TV and choose the A, B or C connection. Picture quality improves in order from A to C.
Audio In connection
Video Out connection (A)
Connect the VIDEO
OUTPUT(MONITOR) jack on
the unit to the corresponding
input jack on your TV using a
Video cable.
The unit’s Audio jacks are
colour coded (red for right
audio and white for left
audio). If your TV has only
one output for audio (mono),
connect it to the left (white)
audio jack on the unit.
FM connection
FM - Connect the FM aerial.
The reception will be its best
when the two loose ends of
the aerial are in a straight and
horizontal line.
Component Video connection (B)
SCART connection (A)
Connect the TO TV jack on
the unit and your TV using
the SCART cable.
Connect the COMPONENT
VIDEO (PROGRESSIVE
SCAN) OUTPUT jacks on
the unit to the corresponding
input jacks on your TV using
a Y PB PR cable.
b Plug the power cord into the power source.
5
HT304SL-DH_BGBRLL_ENG_4503
8/14/09
9:58 AM
Page 6
Hooking up the unit
Resolution Setting
Available resolution according to connection
You can change the resolution for component video and HDMI output.
Press RESOLUTION repeatedly to select the desired resolution - 480i (or 576i),
480p (or 576p), 720p, 1080i, 1080p
The resolution may not be selected depending on the connection or TV.
Displayed resolution in display window and outputted resolution may different
according to connection type.
•
Depending on your TV, some of the resolution settings may result in the
picture disappearing or an abnormal picture appearing. In this case, press
RESOLUTION repeatedly until the picture re-appears.
You can set 1080p video resolution to enjoy Full HD picture quality. (Full
HD up-scaling)
HDMI Out connection (C)
Connect the HDMI OUTPUT jack
on the unit to the HDMI input jack
on a HDMI compatible TV using a
HDMI cable.
Enjoying audio from an external source and selecting the function
You can enjoy audio from an external source through your unit. And You can
select the function.
Press FUNCTION repeatedly to select the desired input source and the function
(DVD/CD, USB, AUX, TV-AUDIO, PORTABLE, FM).
6
[HDMI OUT] : 1080p, 1080i, 720p and 480p (or 576p), 480i(or 576i)
[COMPONENT VIDEO OUT] : 480p (or 576p) and 480i (or 576i)
[VIDEO OUT] : 480i (or 576i)
[SCART] : 576i
Notes on HDMI Out connection
• If your TV does not accept your resolution setting, abnormal picture appears
on the screen.(“TV do not support” will appears in screen)
Please read owner’s manual for TV, and then set the resolution that your TV
can accept.
• Changing the resolution when the unit is connected with HDMI connector
may result in malfunctions. To solve the problem, turn off the unit and then
turn it on again.
• When you connect a HDMI or DVI compatible device make sure of the
following :
- Try switching off the HDMI/ DVI device and this unit. Next, switch on the
HDMI/ DVI device and leave it for around 30 seconds, then switch on this
unit.
- The connected device’s video input is set correctly for this unit.
- The connected device is compatible with 720X576i(480i), 720X576p(480p),
1280X720p, 1920X1080i or 1920X1080p video input.
- The 1080p, 720p and 576p(480p) resolutions are the progressive scan
applied resolution.
• Not all HDCP-compatible DVI devices will work with this unit.
- The picture will not be displayed properly with non-HDCP device.
HT304SL-DH_BGBRLL_ENG_4503
Remote control
8/14/09
9:58 AM
Page 7
c
a
a
PRESET (U u) : Selects programme of Radio.
TUN. (-/+) : Tunes in the desired radio station.
U u I i (up/ down/ left/ right): Used to navigate onscreen displays.
b
ENTER : Acknowledges menu selection.
b
c
d
REPEAT/RANDOM: To select a play mode.(Random,
repeat)
MUTE : To mute the sound.
FUNCTION : Selects the function and input source.
(DVD/CD, USB, AUX, TV-AUDIO, PORTABLE, FM)
SLEEP : Sets the System to turn off automatically at a
specified time. (Dimmer : Dims the LED (Light-emitting
diode) of front panel by half in power-on status.)
POWER : Switches the unit ON or OFF.
OPEN/CLOSE : Opens and closes the disc Drawer.
TITLE : If the current DVD title has a menu, the title
menu appears on the screen. Otherwise, the disc menu
may not appear.
DISPLAY : Accesses On-Screen Display.
MENU : Accesses the menu on a DVD disc.
SETUP : Accesses or removes setup menu.
RETURN (O) : moves backwards in the menu or exits
the setup menu.
REC (z) : USB Direct Recording.
STOP (x) : Stops playback or recording.
PLAY (B), MO./ST. : Starts playback. Selects Mono/
Stereo
PAUSE/STEP (X) : Pause playback.
. / >) : Go to next or previous chapter/
SKIP (.
track/ file.
SCAN (bb/BB) : Search backward or forward.
VOL (Volume) (+/-) : Adjusts speaker volume.
LGEQ : You can select a Natural or Local Specialization
equalizer effect by using LG EQ.
EQ (EQUALIZER effect) : You can choose sound
impressions.
CLEAR : Removes a track number on the Program List.
SUBTITLE : During playback, press SUBTITLE
repeatedly to select a desired subtitle language .
0-9 numerical buttons : Selects numbered options in a
menu.
d
TV Control buttons : Controls the TV. (LG TV only)
Controlling the TV.
You can control the sound level, input source, and
power switching of LG TVs as well. Hold POWER (TV)
and press PR/CH (+/–) button repeatedly until the TV
turns on or off.
PROG./MEMO. : Accesses or removes Program menu.
RESOLUTION : Sets the output resolution for HDMI
and COMPONENT VIDEO OUT jacks.
RDS : Radio Data System.
PTY : Views the various displays of the RDS.
: This button is not available.
Put the battery into the remote control
Make sure for the + (plus) and – (minus) on the
battery to be matched on the remote control.
7
HT304SL-DH_BGBRLL_ENG_4503
8/14/09
9:58 AM
Page 8
OSD Initial language settings - Optional
During the first use of this unit, the initial language setup menu
appears on your TV screen. You must complete initial language
selection before using the unit. English will be selected as the initial
language.
ON REMOTE
ON REMOTE
1 Display setup menu
SETUP
2 Select a desired option on the first level
Uu
3 Move to the second level
i
4 Select a desired option on the second level
Uu
1 Turn the power on
The language list appears
POWER
5 Move to the third level
i
2 Select the language
UuIi
6 Change the setting
U u, ENTER
3 Press
ENTER
4 To confirm press
I i and ENTER
Initial Setting the Area Code - Optional
When you use this unit for the first time, you have to set the Area
Code as shown below.
ON REMOTE
8
Adjusting the general settings
1 Display setup menu
SETUP
2 Select LOCK menu on the first level
Uu
3 Move to second level
The activated Area Code appears on the
second level.
i
4 Move to the third level
i
5 Enter a new password
numerical buttons
(0-9) and ENTER
6 Recheck the entered new password
numerical buttons
(0-9) and ENTER
7 Select a code for a geographic area
After select, Rating and Password will be
activated. (page 17)
U u I and
ENTER
8 To confirm what you press
Make sure to finish setting the Area Code
before leaving the setup menu if you cannot
set the rating and Password
ENTER
Adjusting the general settings
- more you can do
Adjusting the language settings
Menu Language – Select a language for the Setup menu and on-screen
display.
Disc Audio/ Disc Subtitle/ Disc Menu – Select a language for the Disc Audio/
Disc Subtitle/ Disc Menu.
[Original] : Refers to the original language in which the disc was recorded.
[Other] : To select another language, press number buttons then ENTER to
enter the corresponding 4-digit number according to the language code list in
the reference chapter (see page 17). If you make a mistake before pressing
ENTER, press CLEAR.
[Off] (for Disc Subtitle) : Turn off Subtitle.
HT304SL-DH_BGBRLL_ENG_4503
8/14/09
9:58 AM
Page 9
Adjusting the display settings
TV Aspect – Select which screen aspect to use based on the shape of your TV
screen.
[4:3] : Select when a standard 4:3 TV is connected.
[16:9] : Select when a 16:9 wide TV is connected.
5.1 Speaker Setup
ON REMOTE
1 Open the settings menu
SETUP
2 Select to the audio icon
Uu
3 Select right to enter the audio menu, then
select 5.1 Speaker Setup
i U u ENTER
4 Select the speaker you want to adjust
Ii
DRC (Dynamic Range Control) – Make the sound clear when the volume is
turned down (Dolby Digital only). Set to [On] for this effect.
5 Select a option and change
the settings
UuIi
Vocal – Select [On] to mix karaoke channels into normal stereo.
This function is effective for multi-channel karaoke DVDs only.
6 Set the output level (volume) of a speaker
from -5dB to +5dB.
The speaker size setting are
fixed, so you cannot change the setting.
Ii
7 If you connect speakers to your unit,
setting the Distance lets the speakers to
know how far the sound has to travel to
reach your set listening point. This allows
the sound from each speaker to reach the
listener at the same time.
Ii
8 Test the signals of each speaker
Adjust the volume to your taste
according to these signals.
Ii
9 Save your settings and exit the Setup
menu
RETURN
Display Mode – If you selected 4:3, you’ll need to define how you would like
widescreen programs and films to be displayed on your TV screen.
[Letterbox] : This displays a widescreen picture with black bands at the top
and bottom of the screen.
[Panscan] : This fills the entire 4:3 screen, cropping the picture as necessary.
TV Output Select – Select an option according to the TV connection type.
[RGB] : When your TV is connected with the SCART jack.
[YPbPr] : When your TV is connected with the
COMPONENT/ PROGRESSIVE SCAN jacks on the unit.
- If you change TV Output Select to RGB from YPbPr on the setup menu
especially when connecting the unit in the way of component video
connection, the screen turns black. In that case, connect the video cable to
MONITOR jack and select YPbPr on the setup menu again.
Adjusting the audio settings
HD AV Sync - Sometimes Digital TV encounters a delay between picture and
sound. If this happens you can compensate by setting a delay on the sound so
that it effectively ‘waits’ for the picture to arrive: this is called HD AV Sync. Use
U u (on the remote control) to scroll up and down through the delay amount,
which you can set at anything between 0 and 300m sec.
9
HT304SL-DH_BGBRLL_ENG_4503
8/14/09
9:58 AM
Page 10
Adjusting the lock settings
Enjoying a pre-programmed sound field
To access the lock options, you must enter the 4-digit password. If you have not
yet entered a password you are prompted to do so. Enter a 4-digit password
then press ENTER. Enter it again then press ENTER to verify. If you make a
mistake while entering number, press CLEAR then correct it.
If you forget your password you can reset it. First, remove the disc in the unit.
Press SETUP to display the Setup menu. Input ‘210499’ and press ENTER.
The password has now been cleared.
This system has a number of pre-set surround sound fields. You can select a
desired sound mode by using EQ/ LG EQ. You can change the EQ/ LG EQ
using I i arrow key while the EQ/ LG EQ information is displayed on.
The displayed items for the Equalizer may be different depending on sound
sources and effects.
Rating – Select a rating level. The lower the level, the stricter the rating. Select
[Unlock] to deactivate the rating.
Password – Sets or changes the password for lock settings.
[New] : Enter a new 4-digit password using the numerical buttons then press
ENTER. Enter the password again to confirm.
[Change] : Enter the new password twice after entering the current password.
Area Code – Select a code for a geographic area as the playback rating level.
This determines which area’s standards are used to rate DVDs controlled by the
parental lock. See the Area Codes on page 17.
Adjusting the others settings
DivX(R) VOD – We provide you with the DivX® VOD (Video On Demand)
registration code that allows you to rent and purchase videos using the DivX®
VOD service.
For more information, visit www.divx.com/vod.
Press ENTER when [DivX(R) VOD] is highlighted and you can view the
registration code of the unit.
ON DISPLAY
NATURAL
You can enjoy comfortable and natural sound.
AUTO EQ
Realizes the sound equalizer that is the most similar to the
genre of which is included in the MP3 ID3 tag of song files.
POP
CLASSIC
JAZZ
ROCK
This program lends an enthusiastic atmosphere to the
sound, giving you the feeling you are at an actual rock
pop, jazz or classic concert.
MP3 OPT
This function is optimized for compressible MP3 file. It
improves the bass sound.
BASS
Reinforce the treble, bass and surround sound effect.
VIRTUAL
You can enjoy more virtual surround sound.
PLII MOVIE
Dolby Pro Logic II enables you to play stereo source on
PLII MUSIC
5.1-channel.
PLII MTRX(matrix)
NORMAL(OFF)
10
Description
You can enjoy the sound without equalizer effect.
HT304SL-DH_BGBRLL_ENG_4503
8/14/09
9:58 AM
Page 11
Displaying Disc Information
Playing a Disc or file
ON REMOTE
ON REMOTE
Z OPEN/CLOSE
DISPLAY
Uu
1 Insert a disc on unit
2 Select a DVD/CD
FUNCTION
3 Adjust the Display menu settings
Ii
4 To return the exit
DISPLAY
3 Adjust the menu settings
or Select a file from the menu
UuIi
Uu
4 Start the Disc playing
B
PLAY
5 To stop the Disc playing
x
STOP
1 Press DISPLAY
2 Select an item
Displaying Disc Information - more you can do
You can select an item by pressing U u and change or select the setting by
pressing I i.
1/6
4/26
1 ENG
D
1/3
NORMAL
Playing a DVD that has a menu
DVD
Current title (or track/ file)
number/ total number of titles (or tracks/ files)
Current chapter number/ total number of chapters
Elapsed playing time
Selected audio language or channel
Most DVDs now have menus which load first before the film begins to play.
You can navigate these menus using U u I i to highlight an option.
Press PLAY (B) to select.
Selected subtitle
Selected angle/ total number of angles
Press SKIP (>) to move to the next chapter/ track/ file.
Press SKIP (.) to return to the beginning of the current chapter/ track/ file.
Press SKIP (.) twice briefly to step back to the previous chapter/ track/ file.
3/2.1CH
1 KOR
Playing a Disc or file - more you can do
Selected sound mode
Skipping to the next/ previous chapter/ track/ file
Pauseing playback
ALL
ALL
Press PAUSE/STEP (X) to pause playback. Press PLAY (B) to continue
playback.
Symbol Used in this Manual
All discs and file listed below
ALL
MP3 files
MP3
Frame-by-Frame playback
DVD and finalized DVD±R/RW
DVD
WMA files
WMA
Press PAUSE/STEP (X) repeatedly to play title Frame-by-Frame.
DivX files
DivX
Audio CDs
ACD
Playing repeatedly or randomly ALL
DVD
DivX
Press REPEAT/RANDOM repeatedly, and the current title, chapter or track will
be played back repeatedly or randomly. To return to normal playback, press
REPEAT/RANDOM repeatedly.
- Random play mode : only music files.
11
HT304SL-DH_BGBRLL_ENG_4503
Fast forward or fast reverse
8/14/09
9:58 AM
Page 12
Viewing the DVD MENU
ALL
Press SCAN (m or M) to play fast forward or fast reverse during playback.
You can change the playback speed by pressing SCAN (m or M)
repeatedly. Press PLAY (B) to continue play at normal speed.
Selecting a subtitle language
DVD
During playback, press SUBTITLE (
language.
Slowing down the playing speed
DivX
) repeatedly to select a desired subtitle
DivX
While playback is paused, press SCAN (bb or BB) to slow down forward or
reverse playback. You can change the various playback speed by pressing
SCAN (m or M) repeatedly. Press PLAY (B) to continue play at normal
speed. The DivX file cannot be slow down reverse playback.
1.5 times faster playback
DVD
Press PLAY (B) when a DVD is already playing to watch and listen to a DVD
1.5 times faster than normal playback speed. “B x1.5” will appear in the screen.
Press PLAY (B) again to return to normal playback speed.
Viewing the Title menu
DVD
Press TITLE to display the disc's title menu, if available.
Starting play from selected time
DVD
DivX
Searches for the starting poing of entered time code. Press DISPLAY then
select clock icon. Enter a time then press ENTER. For example, to find a scene
at 1 hour, 10 minutes, and 20 seconds, enter “11020” by using numerical
buttons and press ENTER. if you enter the wrong number, press CLEAR to
enter again.
Last Scene Memory
DVD
This unit memorizes the last scene from the last disc that is viewed. The last
scene remains in memory even if you remove the disc from the player or switch
off (Stand-by mode) the unit. If you load a disc that has the scene memorized,
the scene is automatically recalled.
Mixed disc or USB Flash Drive – DivX, MP3/ WMA and JPEG
When playing a disc or USB Flash Drive containing with DivX, MP3/ WMA and
JPEG files together, you can select menu of files which you would like to play
by pressing MENU. If “This file has non-supported type on the player” pops up,
select an appropriate file by pressing MENU.
12
Changing the character set to display DivX® subtitle correctly
DivX
If the subtitle does not display properly during playback, press and hold
SUBTITLE for about 3 seconds then press I i or SUBTITLE to select another
language code until the subtitle is displayed properly and then press ENTER.
DivX file requirement
DVD
DVD
Press MENU to display the disc menu, if available.
DivX
DivX disc compatibility with this player is limited as follows :
• Available resolution: within 720x576 (W x H) pixels
• The file name of the DivX subtitle should be entered within 45 characters.
• If there is impossible code to express in the DivX file, it may be displayed as
" _ " mark on the display.
• Frame rate : less than 30 fps
• If the video and audio structure of recorded files is not interleaved, either
video or audio is outputted.
• Playable DivX file : ".avi", ".mpg", ".mpeg", ".divx"
• Playable Subtitle format : SubRip (*.srt/ *.txt), SAMI (*.smi), SubStation Alpha
(*.ssa/ *.txt), MicroDVD (*.sub/ *.txt), SubViewer 2.0 (*.sub/ *.txt)
• Playable Codec format : "DIVX3.xx", "DIVX4.xx", "DIVX5.xx", "MP4V3",
"3IVX".
• Playable Audio format : "AC3", "PCM", "MP3", "WMA".
• Sampling frequency : within 32 - 48 kHz (MP3), within 32 - 48kHz (WMA)
• Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA)
• For Discs formatted in Live file system, you can not it on this player.
• If the name of movie file is different from that of the subtitle file, during
playback of a DivX file, subtitle may not be display.
• If you play a DivX file differ from DivXspec, it may not operate normally.
Fall asleep while listening to your player
Press SLEEP one or more times to select delay time between 10 and 180
minutes, after the player will turn off.
To check the remaining time, press SLEEP. To cancel the sleep function, press
SLEEP repeatedly until “SLEEP 10” appears, and then press SLEEP once
again while “SLEEP 10” is displayed.
DIMMER
Press SLEEP once. The LED (Light-emitting diode) of front panel is turned off
and the display window will be darken by half. To cancel it, press SLEEP
repeatly until dim off.
HT304SL-DH_BGBRLL_ENG_4503
8/14/09
Creating your own program ACD
9:58 AM
MP3
Page 13
WMA
You can play the contents of a disc in the order you want by arranging the order
of the musics on the disc. To add a music(s) on the program list, press
PROG./MEMO. to enter the program edit mode ( E mark appears on the menu).
Select a desired music on the [List] by using the U u then press ENTER to add
the music to the program list. Select music from the program list then press
ENTER to start programmed playback. To clear a music from the program list,
select the music you want to clear by using the U u then press CLEAR in
program edit mode. To clear all music from the program list, select [Clear All]
then press ENTER in program edit mode. The program is cleared when the disc
is removed or the unit is turned off.
Displaying file information (ID3 TAG ) MP3
While playing an MP3 file containing file information, you can display the
information by pressing DISPLAY repeatedly.
MP3/ WMA music file requirement
Viewing photo files
ON REMOTE
1 Insert a disc on unit
Z OPEN/CLOSE
2 Select a DVD/CD
FUNCTION
3 Select a photo file
Uu
4 Display the selected file in full screen
B
PLAY
5 To return to the menu
x
STOP
Viewing photo files - more you can do
Viewing photo files as a slide show
Use U u I i to highlight (
) icon then press PLAY (B) to start slide Show.
MP3/ WMA disc compatibility with this player is limited as follows :
• Sampling frequency : within 32 - 48 kHz (MP3), within 32 - 48kHz (WMA)
• Bit rate : within 32 - 320kbps (MP3), 40 - 192kbps (WMA)
• Support Version : v2, v7, v8, v9
• Maximum files : Under 999.
• File extensions : “.mp3”/ “.wma”
• CD-ROM file format : ISO9660/ JOLIET
• We recommend that you use Easy-CD Creator, which creates an ISO 9660
file system.
) icon is highlighted.
You can change slide show speed using I i when (
Depending on the size and resolution of JPEG files, it may take longer for slider
show to be set.
Screen Saver
Pauseing a slide show
The screen saver appears when you leave the unit in Stop mode for about five
minutes.
Press PAUSE/STEP (X) to pause a slide show. Press PLAY (B) or
PAUSE/STEP (X) to continue the slide show.
System Select - Optional
Listening to music during slide show
You must select the appropriate system mode for your TV system. If “NO DISC”
appears in the display window, press and hold PAUSE/STEP (X) for more than
five seconds to be able to select a system. (PAL/ NTSC)
You can listen to music during slide show, if the disc contain music and photo
) icon then press PLAY (B) to start
files together. Use U u I i to highlight (
slide show. This function is available only in disc.
Skipping to the next/ previous photo
Press SKIP (. or >) or I i to view the previous/ next photo.
Rotating a photo
Use U u to rotate the photo in full screen counterclockwise or clockwise while
viewing a photo in full screen.
Photo file requirement
JPEG disc compatibility with this player is limited as follows :
• Max pixel in width : 2760 x 2048 pixel
• Maximum files : Under 999.
• Some discs may not operate due to a different recording format or the
condition of disc.
• File extensions: “.jpg”
• CD-ROM file format : ISO9660/ JOLIET
13
HT304SL-DH_BGBRLL_ENG_4503
8/14/09
9:58 AM
Page 14
Seeing information about a radio station
Listening to the radio
Be sure that FM aerial is connected.
ON REMOTE
1 Turn the power on
PS
(Programme Service Name)
The name of the channel will appear in the display
PTY
(Programme Type Recognition)
The programme type (e.g. Jazz or News) will appear in the display.
RT
(Radio Text)
A text message contains special information from the broadcast station.
This text may scroll across the display.
CT
(Time controlled by the channel)
This shows the time and date as broadcast by the station.
POWER
2 Select FM.
FUNCTION
3 Select a radio station
TUN.-/+
4 To ‘save’ a radio station
A preset number will show in the display.
PROG./MEMO.
5 Select the preset number
Up to 50 radio stations can be saved.
PRESET U u
6 To confirm press
PROG./MEMO.
7 To select a ‘saved’ station input the preset
number
PRESET U u
Listening to the radio - more you can do
Looking for radio stations automatically
Press and hold TUN.-/TUN.+ for more than a second. The tuner will scan
automatically and stop when it finds a radio station.
Deleting all the saved stations
Press and hold PROG./MEMO. for two seconds. ERASE ALL will flash up on
the DVD receiver display. Press PROG./MEMO. to erase all saved radio
stations.
Improving poor FM reception
B) (MO./ST.) on the remote control. This will change the tuner
Press PLAY (B
from stereo to mono and usually improve the reception.
14
The FM tuner is supplied with the RDS (Radio Data System) facility. This shows
information about the radio station being listened to. Press RDS repeatedly to cycle
through the various data types. :
HT304SL-DH_BGBRLL_ENG_4503
8/14/09
9:58 AM
Page 15
Using an USB device
You can enjoy media files saved on an USB device by connecting the
USB device to the USB port of the unit.
If you want to operate other function, see the CD playback section.
Listening to music from your
portable player or external device
The unit can be used to play the music from many types of portable player or
external device.
ON REMOTE
1 Connect the USB device to the USB
port of the unit.
-
2 Select the USB function
FUNCTION
3 Select a file you want to play
Uu
4 Start your media playing
B
PLAY
5 To stop, press
x
STOP
6 Before disconnecting the portable USB
device, change to any other function.
FUNCTION
ON REMOTE
1 Connect the portable player to the
PORT.IN(PORTABLE IN) connector of the unit.
PORT. IN (PORTABLE IN)
Compatible USB Devices
• MP3 Player : Flash type MP3 player.
• USB Flash Drive : Devices that support USB2.0 or USB1.1.
• The USB function of this unit does not support all USB devices.
Or
Connect the external device to the AUX connector
of the unit.
> If your TV has only one output for audio(MONO).
connect it to the left(white) audio jack on the unit.
Main unit
-
VCR, TV, ...
USB device requirement
• Devices which require additional program installation when you have
connected it to a computer, are not supported.
Look out for the follows
•
•
•
•
•
•
•
•
Do not extract the USB device while in operation.
For a large capacity USB, it may take longer than a few minute to be searched
To prevent data loss, back up all data.
If you use a USB extension cable or USB hub, the USB device is not
recognized.
Using NTFS file system is not supported. (Only FAT(16/32) file system is
supported).
This unit is not supported when the total number of files is 1000 or more.
External HDD, Card readers, Locked devices, or hard type usb devices are
not supported.
USB port of the unit cannot be connected to PC. The unit can not be used as
a storage device.
2 Turn the power on
POWER
3 Select the PORTABLE or AUX function
FUNCTION
4 Turn the portable external device and
start it playing
-
15
HT304SL-DH_BGBRLL_ENG_4503
8/14/09
9:58 AM
Page 16
When you are recording, look out for the following
Recording to USB
ON REMOTE
1 Connect the USB device to the unit
2 Select a mode in which you want
to record
(ex. CD/ TUNER....)
FUNCTION
Play back a sound source first
If you want to record desired music file
in disc to USB, record after playing
back the file.
3 Start the recording
4 To stop recording, press
z
x
REC
STOP
Recording to USB - more you can do
Recording Music file in disc source to USB
One track recording
If the USB recording is started during playback of the CD, the one track/ file
would be recording into the USB.
All tracks recording
If the recording button is pressed at the CD stop, all tracks/ files would be
recording.
- The files in the sub-folders are not recorded during all track recording.
- If you want to all tracks recording during playback, press stop twice. check the
x”on the screen.
“x
• You can check the recording percentage rate for the USB record on the
screen during the recording.(AUDIO, MP3/ WMA CD only)
• During recording MP3/ WMA, there is no sound.
• When you stop recording during playback, the file that has been recorded at
that time will be stored.(AUDIO CD Only)
• Do not remove the USB device or turn off the unit during USB recording. If
not, an incomplete file may be made and not deleted on PC.
• If USB recording does not work, the message like “NO USB”, “ERROR”,
“USB FULL” or “NO REC” is displayed on the display window.
• Multi card reader device or External HDD can not be used for USB
recording.
• A file is recoreded by 128Mbyte when you record for a long term.
• when you stop recording during playback, the file will not be stored.
• In the state CD-G, DTS disc USB record is not operated.
• You may not record more than 999files.
• The numbering of the recording file is entered from the lowest number.
So if you delete some of the recording files, the next recording file could be
the lowest number among them.
• It’ll be stored as follows.
AUDIO CD
MP3/ WMA
The other sources
(Tuner, AUX,
Portable, etc)
Program list recording
USB records after creating your own program if you want to record the track
you want (AUDIO CD Only).
The making of unauthorized copies of copy-protected material, including
computer programs, files, broadcasts and sound recordings, may be an
infringement of copyrights and constitute a criminal offense. This
equipment should not be used for such purposes.
Be responsible
Respect copyrights
16
HT304SL-DH_BGBRLL_ENG_4503
8/14/09
9:58 AM
Page 17
Language Codes
Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Language
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali; Bangla
Bhutani
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Chinese
Code
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
9072
Language
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Code
7282
6783
6865
7876
6978
6979
6984
7079
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
Language
Hausa
Hebrew
Hindi
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Italian
Japanese
Kannada
Kashmiri
Kazakh
Kirghiz
Korean
Kurdish
Laothian
Latin
Latvian, Lettish
Code
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Code
7678
7684
7775
7771
7783
7776
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
Language
Quechua
Rhaeto-Romance
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Sindhi
Singhalese
Slovak
Slovenian
Spanish
Sudanese
Swahili
Swedish
Tagalog
Code
8185
8277
8279
8285
8377
8365
7168
8382
8372
8378
8368
8373
8375
8376
6983
8385
8387
8386
8476
Language
Tajik
Tamil
Telugu
Thai
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Code
8471
8465
8469
8472
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Area Codes
Choose a area code from this list.
Area
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
Brazil
Cambodia
Canada
Chile
China
Colombia
Congo
Code
AF
AR
AU
AT
BE
BT
BO
BR
KH
CA
CL
CN
CO
CG
Area
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
El Salvador
Ethiopia
Fiji
Finland
France
Germany
Great Britain
Greece
Code
CR
HR
CZ
DK
EC
EG
SV
ET
FJ
FI
FR
DE
GB
GR
Area
Greenland
Hong Kong
Hungary
India
Indonesia
Israel
Italy
Jamaica
Japan
Kenya
Kuwait
Libya
Luxembourg
Malaysia
Code
GL
HK
HU
IN
ID
IL
IT
JM
JP
KE
KW
LY
LU
MY
Area
Maldives
Mexico
Monaco
Mongolia
Morocco
Nepal
Netherlands
Netherlands Antilles
New Zealand
Nigeria
Norway
Oman
Pakistan
Panama
Code
MV
MX
MC
MN
MA
NP
NL
AN
NZ
NG
NO
OM
PK
PA
Area
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
Code
PY
PH
PL
PT
RO
RU
SA
SN
SG
SK
SI
ZA
KR
ES
Area
Sri Lanka
Sweden
Switzerland
Taiwan
Thailand
Turkey
Uganda
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
Zimbabwe
Code
LK
SE
CH
TW
TH
TR
UG
uaw
US
UY
UZ
VN
ZW
17
HT304SL-DH_BGBRLL_ENG_4503
8/14/09
9:58 AM
Page 18
Troubleshooting
PROBLEM
CAUSE
CORRECTION
No power
No picture
The power cord is disconnected.
The TV is not set to receive the DVD signal.
Plug the power cord into the wall outlet securely.
Select the appropriate video input mode on the TV so the
picture from the DVD Receiver appears on the TV screen.
Connect the video cables securely to both the TV and DVD
Receiver.
Select the correct input mode of the audio receiver so you can
hear the sound from the DVD receiver.
Connect the audio cables into the connection terminals
correctly.
Replace with a new audio cable.
Clean the disc using a soft cloth with outward strokes.
Insert a disc
Insert a playable disc (check the disc type, colour system
and regional code).
Place the disc with the label or printed side facing
upwards.
Press SETUP to close the menu screen.
Enter your password or change the rating level.
The video cables are not connected securely.
There is little or no sound
The DVD picture quality is poor
A DVD/CD will not play
Equipment connected via the audio cable is not set to
receive DVD signal output.
The audio cables are not connected to the speakers or
receiver securely.
The audio cables are damaged.
The disc is dirty.
No disc is inserted.
An unplayable disc is inserted.
The disc is inserted upside down.
Humming noise heard while a
DVD or CD is playing
Radio stations can’t be tuned in
properly
The remote control doesn’t
work well / at all
18
The menu is open on screen.
There is a parental lock which prevents the playback of DVDs
with a certain rating.
The disc is dirty.
The DVD receiver is located too close to the TV, causing
feedback.
The antenna is positioned or connected poorly.
The signal strength of the radio station is too weak.
No stations have been preset or preset stations have been cleared
(when tuning by scanning preset channels).
The remote is not pointed directly at the DVD receiver.
The remote is too far from the DVD receiver.
There is an obstacle in the path between the remote control
and the unit.
The battery in the remote control are flat.
Clean the disc using a soft cloth with outward strokes.
Move DVD receiver and audio components further away from
your TV.
Check the antenna connection and adjust its position.
Attach an external aerial if necessary.
Tune to the station manually.
Preset some radio stations, see page 14 for details.
Point the remote directly at the unit.
Use the remote within 23 feet (7m) of the DVD receiver.
Remove the obstacle.
Replace the batteries with new ones.
HT304SL-DH_BGBRLL_ENG_4503
8/14/09
9:58 AM
Page 19
Types of Playable Discs
Type
Logo
DVD-VIDEO : Discs such as movies that can
be purchased or rented.
DVD-R : Video mode and finalized only
DVD-RW : Video mode and finalized only
DVD VR format that have been finalized can not be
played in this unit
DVD+R : Video mode only
Supports the double layer disc also
DVD+RW : Video mode only
Audio CD : Music CDs or CD-R/ CD-RW in
music CD format that can be purchased.
This unit plays DVD±R/ RW and CD-R/ RW that contains audio titles,
DivX, MP3, WMA and/ or JPEG files. Some DVD±RW/ DVD±R or
CD-RW/ CD-R cannot be played on this unit due to the recording
quality or physical condition of the disc, or the characteristics of the
recording device and authoring software.
“Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby
Laboratories.
Manufactured under license from Dolby Laboratories.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI licensing LLC.
About the Symbol Display
“ ” may appear on your TV display during operation and indicates that the
function explained in this owner’s manual is not available on that specific DVD
video disc.
Regional Codes
This unit has a regional code printed on the rear of the unit. This unit can play
only DVD discs labeled same as the rear of the unit or “ALL”.
• Most DVD discs have a globe with one or more numbers in it clearly visible
on the cover. This number must match your unit’s regional code or the disc
cannot play.
• If you try to play a DVD with a different regional code from your player, the
message “Check Regional Code” appears on the TV screen.
Copyrights
It is forbidden by law to copy, broadcast, show, broadcast via cable, play in
public, or rent copyrighted material without permission. This product features
the copy protection function developed by Macrovision. Copy protection signals
are recorded on some discs. When recording and playing the pictures of these
discs picture noise will appear. This product incorporates copyright protection
technology that is protected by U.S. patents and other intellectual property
rights. Use of this copyright protection technology must be authorized by
Macrovision, and is intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision. Reverse engineering or
disassembly is prohibited.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION
TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND
MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF
525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS
RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE
‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS
REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p AND
625p UNIT, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.
You have to set the disc format option to [Mastered] in order to make the discs
compatible with the LG players when formatting rewritable discs. When setting
the option to Live File System, you cannot use it on LG players.
(Mastered/ Live File System : Disc format system for Windows Vista)
19
HT304SL-DH_BGBRLL_ENG_4503
8/14/09
9:58 AM
Page 20
Specifications
Specifications
General
Speakers (HT304SQ)
Power supply
Power consumption
Net Weight
External dimensions (W x H x D)
Operating conditions Temperature
200-240V, 50/60Hz
50W
2.5 kg
360 x 62 x 305 mm
5°C to 35°C,
Operation status: Horizontal
5% to 85%
Semiconductor laser,
wavelength 650 nm
Operating humidity
Laser
Tuner FM
FM Tuning Range
87.5 - 108.0 MHz
FM Intermediate Frequency 128 kHz
Amplifier
Stereo mode
Surround mode Front
Center*
Surround*
Subwoofer*
45
45
45
45
75
W
W
W
W
W
+ 45 W (4Ω at 1 kHz, THD 10 %)
+ 45 W (THD 10 %)
+ 45 W (4Ω at 1 kHz, THD 10 %)
(8Ω at 30 Hz, THD 10 %)
Speakers (HT304SU)
Type
Impedance
Rated Input Power
Max. Input Power
Net Dimensions (W x H x D)
Net Weight
Front/Rear
Speaker
Center
speaker
Passive
Subwoofer
1 Way 1 Speaker
4Ω
45 W
90 W
117 x 114 x 114 mm
0.53 kg
1 Way 1 Speaker
4Ω
45 W
90 W
117 x 114 x 114 mm
0.53 kg
1Way1Speaker
8Ω
75 W
150 W
156 x 325 x 320 mm
3.5 kg
Designs and specifications are subject to change without
prior notice.
20
Type
Impedance
Rated Input Power
Max. Input Power
Net Dimensions (W x H x D)
Net Weight
Front/Rear
Speaker
Center
speaker
Passive
Subwoofer
1 Way 1 Speaker
4Ω
45 W
90 W
99 x 114 x 86 mm
0.35 kg
1 Way 1 Speaker
4Ω
45 W
90 W
99 x 114 x 86 mm
0.35 kg
1Way1Speaker
8Ω
75 W
150 W
156 x 325 x 320 mm
3.5 kg
HT304SL-DH_BGBRLL_ENG_4503
8/14/09
9:58 AM
Page 21
Technology with the human touch
GUARANTEE
● LG Electronics U.K. Ltd. will provide the following services in order to
● REQUIREMENTS TO MAINTAIN WARRANTY COVERAGE:
expedite this Guarantee.
1. All faulty components which fail due to defective manufacture will be
replaced free of charge for a period of 12 months from the original date
of purchase.
RETAIN YOUR RECEIPT TO PROVE DATE OF PURCHASE. A COPY
OF YOUR RECEIPT MUST BE SURRENDERED AT THE TIME
GUARANTEE SERVICE IS PROVED.
● Product Registration Card :
2. The dealer (or his service agent) who sold the product will be
reimbursed for any labour provided in the repair of this LG equipment,
for a period of 12 months from the original date of purchase.
These claims must be made in accordance with the published scale of
service charges and relevant claims procedure.
PLEASE NOTE:
A. The dealer may restrict the guarantee to the original purchaser.
● To obtain information or assistance: Call 0870 873 5454 Monday-Friday
9.00am-4.30pm
B. The dealer is not obliged to carry out service under guarantee if
unauthorized modifications are made to the apparatus, or if non
standard components are used or if the serial number of the
apparatus is removed, defaced, misused, or altered.
C. Any claims made under guarantee must be directed to the dealer from
whom the equipment was originally purchased. The dealer may, before
carrying out service under guarantee, require a receipted account as
evidence of the date of purchase.
D. We respectfully point out that your dealer is not obligated to replace
batteries if they become exhausted or worn in use.
E. Aerial alignment and consumer control adjustments are not covered by
this guarantee.
This guarantee does not affect your statutory rights.
It is helpful to complete at least
your name, address, phone, model
& serial numbers and return it. This
will enable LG to assist you in the
future should you lose your receipt,
your units be stolen, or should
modifications be necessary.
MODEL NO.*
*
SERIAL NO.*
DATE OF PURCHASE.*
Please complete for your own record
In all cases of difficulty - consult your LG dealer
from whom the product was purchased
LGEUK Website : www.lge.co.uk
( service website : www.lgelectronics.co.uk )
HT304SL-DH_BGBRLL_ENG_4503
8/14/09
9:58 AM
Page 22