PoE Module for
BOH-1100/1200/1300
POM-1100
H/W Version: 1
IP Camera networks are growing in size to offer
surveillance that covers a larger area. If you’re
the network installer or electrician, it takes a lot
more time, cost, and effort to get the job done
when networks expand.
LevelOne’s PoE Module, POM-1100, simplifies
thing by providing an easy way to send
power to both the camera and housing. This
innovative module supports LevelOne’s highquality outdoor camera housings allowing the
installer to choose the ideal combination that
fits the network.
POM-1100 takes the power and data sent over
the Cat.5 cable from the PSE (Power Sourcing
Equipment) and distributes it to the other
devices. It has a simple to use interface that
offers current limit, short-circuit and overload
protection that provides up to 12V DC/2.5A for
the IP camera, housing fan, housing heater.
POM-1100 needs to work together with
LevelOne's high-power PoE injector (POI-4000,
40w) to ensure that the outdoor housings and
IP Camera receive the required power minimum
POM-1100 only fits with LevelOne
BOH-1100/1200/1300.
1
2
3
4
Key Features
-12V DC / 2.5A High-Power PoE Splitter Module
- Power for IP Cam, IR LEDs, housing heater and
fan all from a single PoE cable
- Supports High-Power up to 30W
- For PoE and non-PoE Cameras
- All necessary accessories included
- Easy installation
1. LED
2. DC Power Output
3. Data Output
4. PoE Input
Works Well With
BOH-1100
Outdoor Housing for Box
Cameras (12VDC)
BOH-1200
Box-type Outdoor
Housing w/ Infrared LEDs
(12VDC/24VAC)
BOH-1300
Outdoor Housing for Box
Cameras (12VDC/24VAC)
www.level1.com I one world_one brand_one level_
Network Cameras
Technical Specifications
LAN Interface:
IEEE 802.3x, Auto-Detection for 10/100BASE-T and full/
half duplex
Standard Straight-through, or Cross-over CAT 5 Cable
Automatic MDIX function
RJ-45 x 2 (PoE in/ Data output)
DC output power (2pin): DC 12V/2.5A, to connect
BOH-1100/1200/1300
LED Indicators:
POWER: Power is ON
Physical Dimension:
W x D x H: 120 x 90 x 28 (mm)
Operating Environment:
Humidity: 5% to 95% non-condensing
Temperature: 0~50°CCompatible List:
Compatible List:
BOH-1100: FCS-1081A/1101/1091/1070
BOH-1200: FCS-1091/1070
BOH-1300: FCS-1081A/1101/1091/1070
Product Diagram
Ethernet Cable (RJ-45)
PoE
POM-1100
+
+
100m
Non-PoE Switch
100m
POI-4000
POR-1100
POM-1100 + FCS-1091 + BOH-1200 Solution
Order Information
POM-1100: PoE Module for BOH-1100/1200/1300
Package Content
PoE Module
QIG
Screw
Power cord
POM-1100 +
FCS-1091 +
BOH-1200
All mentioned brand names are registered trademarks and property of their owners. Technical specifications are subject to change without notice.
© Copyright 2009 Digital Data Communications GmbH. All Rights Reserved.
V1.0