1 Port ExpressCard e-SATA Controller Adapter Card
Verifying Installation For
Win2k/XP/Vista
1. From the main desktop right –click on my computer
System Requirements
2.
1.
2.
3.
An ExpressCard enabled computer system
OS support: Windows® /2000/XP/Server 2003/Vista
The ExpressCard will fit into any ExpressCard .
Push the card into slot, until it “clicks”.
See your laptop’s documentation
for more specific information on plugging ExpressCard
adapter .
After the card is inserted into the ExpressCard,
Windows should automatically detect new
hardware. The Found New Hardware wizard
should appear.
When prompted, insert the included driver CD into
your computer and Windows should automatically
start searching the CD. Otherwise click “Next” to
proceed.
Follow any on screen prompts, until the
card is successfully installed.
3.
then select Manage. In the new computer management
window, select device manager from the left window
panel
Under the “SCSI and RAID Controller(2000/XP) or
storage controllers(vista) category, your should see a
device called JMicorn JM363.
Right-click on that device and select properties and
under device status is should say it’s working
properly.
Specifications
Bus Interface
Form Factor
Connectors
ExpressCard 1.0
ExpressCard/34
eSATA
Chipset
Maximum Data Transfer
Rate
JMicorn JMB363
3 Gb/s
Compatible Operating
Systems
Windows®
98SE/ME/2000/XP/Server
2003/Vista