Kingston Technology System Specific Memory KHX6400D2/2G

Memory Module Specification
T E C H N O L O G Y
KHX6400D2/2G
2GB 256M x 64-Bit PC2-6400
CL5 240-Pin DIMM
DESCRIPTION:
This document describes Kingston's 256M x 64-bit 2GB (2048MB) DDR2-800 CL5 SDRAM
(Synchronous DRAM) memory module, based on sixteen 128M x 8-bit DDR2 FBGA components.
This module has been tested to run at DDR2 800MHz at latency timing of 5-5-5-15 at 1.85V. The
SPD is programmed to JEDEC standard latency 667Mhz timing of 5-5-5-15 at 1.8V. This 240-pin
DIMM uses gold contact fingers and requires +1.8V. The electrical and mechanical specifications
are as follows:
FEATURES:
Power supply : Vdd: 1.8V ± 0.1V, Vddq: 1.8V ± 0.1V
Double-data-rate architecture; two data transfers per clock cycle
Bidirectional data strobe(DQS)
Differential clock inputs(CK and CK)
DLL aligns DQ and DQS transition with CK transition
Programmable Read latency 5 (clock)
Burst Length: 4, 8 (Interleave/nibble sequential)
Programmable Burst type (sequential & interleave)
Timing Reference: 5-5-5-15 at +1.8V / 5-5-5-15 at +1.85V
Edge aligned data output, center aligned data input
Auto & Self refresh, 7.8us refresh interval (8K/64ms refresh)
Serial presence detect with EEPROM
High Performance Heat Spreader
PCB : Height 1.180” (30.00mm), double sided component
PERFORMANCE:
Clock Cycle Time (tCK) CL=5
Row Cycle Time (tRC)
Refresh to Active/Refresh Command Time (tRFC)
Row Active Time (tRAS)
Single Power Supply of
Power
UL Rating
Operating Temperature
Storage Temperature
3ns (min.) / 8ns (max.)
60ns (min.)
127.5ns
45ns (min.) / 70,000ns (max.)
+1.8V (+/- .1V)
2.016 W (operating)
94 V - 0
0o C to 55o C
-55o C to +125o C
KE
YE
D
Document No. 4804728-001.B00
08/09/07
Page 1
Kingston Technology
MODULE DIMENSIONS:
Units: millimeters
2.7
1.270 ± 0.10
4.00
4.00
3.00
2.50±0.20
5.00
0.80±0.05
3.80
2.50
1.50±0.10
0.20
1.00
4.00
For more information, go to www.kingston.com
All Kingston products are tested to meet our published specifications. Some motherboards or system configurations may not
operate at the published HyperX memory speeds and timing settings. Kingston does not recommend that any user attempt to
run their computers faster than the published speed. Overclocking or modifying your system timing may result in damage to
computer components.
Document No. 4804728-001.B00
Page 2