Allied Telesis AT-X600-48TS/XP network switch

Datasheet | Switches
x600-24 and 48 Series
Intelligent Gigabit Layer 3+ Switches
The x600 Layer 3+ switches offer an impressive set of features in a high-value package.
Network Access Control (NAC) assures security, giving you unprecedented control over
user access to the network to mitigate threats to network infrastructure. 802.1x port-based
authentication, in partnership with standards-compliant dynamic VLAN assignment, assesses a
user’s network security adherence and either grants authentication or offers remediation.
The x600 family is scalable, with an extensive range of port-density and uplink-connectivity
options. With a choice of 24-port and 48-port versions, plus the ability to stack up to 4
units, the x600 family can connect anything from a small workgroup right up to a large
business. The choice of 1 Gigabit or 10 Gigabit uplink ports allows you to tailor the uplink
bandwidth to suit your network application.
Virtual Chassis Stacking (VCStackTM) provides excellent resiliency. You can create a single
"virtual chassis" from up to four physical switches.
If one stacked switch fails, traffic routes seamlessly
What's new?
to another, preventing network disruption. VCStack
delivers a resilient solution at a fraction of the cost of
▀▀ Dynamic Host Configuration
a full chassis-based system, and you can manage the
Protocol (DHCP) Snooping
stack as a single network node, greatly simplifying your
management tasks.
▀▀ sFlow
AlliedWare Plus TM
O P E R AT I N G S YS T E M
Enjoy high performance - stacking bandwidth is
provided separately from the 10-gig uplink ports enabling a 4-unit stack to have a massive 160 Gigabits
of uplink bandwidth with no reduction in stacking
backplane throughput.
▀▀
▀▀
VCStack Fast Failover
Strong Passwords
For more information, go to page 3
Key Features
Secure - Advanced security features protect your network - from the edge to the core. Network Access Control (NAC) gives
unprecedented control over user access to your network
Scalable - Enjoy the choice of 24 port and 48 port options, coupled with the ability to stack up to 4 units, as well as an extensive
range of port density and uplink connectivity options.
Resilient - VCStack provides fast failover for uninterrupted network service. Sophisticated high availability features ensure traffic
flow continues even during outages.
High-performing - Non-blocking architecture and superior QoS ensure wire-speed delivery of all your critical IPv4 and IPv6 traffic.
Easy to manage - The industry standard CLI reduces training needs, and each VCStack appears as one virtual chassis with a single
IP address to simplify management. 'Network in a Box' simplifies administration. Plus, the GUI allows easy management control.
Allied Telesis
Page 1
www.alliedtelesis.com
x600-24 AND 48 SERIES | Intelligent Gigabit Layer 3+ Switches
Secure
Thrash Limiting
Monitoring of excessive MAC learning events enables early detection of
storms, allowing the switch to shut down the storm before it spreads.
Advanced security features protect your network - from the edge to the core.
Network Access Control (NAC)
High-performing
NAC allows for unprecedented control over user access to the network, in
order to mitigate threats to network infrastructure. The x600 switches use
802.1x port-based authentication in partnership with standards-compliant
dynamic VLAN assignment, to asses a user’s adherence to network security
policies and either grant authentication or offer remediation.
Non-blocking architecture and superior QoS ensure wire-speed delivery
of all your critical IPv4 and IPv6 traffic.
Industry-leading Quality of Service (QoS)
Comprehensive low-latency wire-speed QoS provides flow-based traffic
management with full classification, prioritization, traffic shaping and min/max
bandwidth profiles. Enjoy boosted network performance and guaranteed
delivery of business-critical Ethernet services and applications. Time-critical
services like voice and video take precedence over non-essential services like
file downloads, maintaining responsiveness of Enterprise applications.
Furthermore, if multiple users share a port then multi-authentication can be
used. Different users on the same port can be assigned into different VLANs,
and so given different levels of network access. Additionally, a Guest VLAN
can be configured to provide a catch-all for users who aren't authenticated.
Tri-authentication
Convergence
Authentication options on the x600 also include alternatives to 802.1x portbased authentication, such as web authentication to enable guest access, and
MAC authentication for end points that do not have an 802.1x supplicant.
All three authentication methods - 802.1x, MAC-based and Web-based, can
be enabled simultaneously on the same port (tri-authentication).
Key features that support the convergence of data, voice and video.
Power over Ethernet (PoE)
With the the x600-24Ts-POE, you no longer need to provide a separate
power connection to the growing list of PoE-enabled media endpoints such as
IP phones, security cameras and wireless access points. PoE reduces your costs
and gives you greater flexibility with endpoint location.
Local RADIUS server
As well as supporting a RADIUS client for remote authentication, the x600
Layer 3+switches have a built in RADIUS server for local authentication.
Link Layer Discovery Protocol - Media Endpoint Discovery
(LLDP - MED)
Further security features
The x600 switches also support a number of features to combat LAN-based
attacks - BPDU Guard, STP Root Guard, DOS attack blocking and ACLs.
LLDP-MED extends LLDP's basic network endpoint discovery and
management functions. LLDP-MED allows for media endpoint specific
messages, providing detailed information on power requirements, network
policy, location discovery (for Emergency Call Services) and inventory.
Scalable
An extensive range of port-density and uplink-connectivity options.
Voice VLAN
The choice of 24-port and 48-port versions, coupled with the ability to stack
up to 4 units, means this one switch family can connect anything from a small
workgroup right up to a large business.
Voice VLAN automatically separates voice and data traffic into two different
VLANS. This automatic separation places delay-sensitive traffic into a voicededicated VLAN, which simplifies QoS configurations.
The choice of 1 Gigabit or 10 Gigabit uplink ports lets you tailor the uplink
bandwidth to suit your network application. Stacking bandwidth is provided
separately from the 10 Gigabit uplink ports - so a 4-unit stack can have a
massive 160 Gbps of uplink bandwidth.
Easy to manage
Industry standard CLI and Network in a Box.
Hotswappable XFPs provide high-speed, high-capacity fiber uplinks, with up to
40Gbps uplink capacity from each switch to the network core.
The flexibility of the x600 family, coupled with the ability to stack multiple
units, ensures a future-proof network.
The x600 Layer 3+ switches run the advanced AlliedWare Plus™ Layer
3 Fully Featured Operating System, delivering a rich feature set and an
industry-standard CLI. In addition to the CLI, the x600 switches feature a
comprehensive GUI for easy access to monitoring and configuration.
Network in a Box
Network in a Box simplifies administration by integrating several network
services into the x600 switch:
Resilient
VCStack provides fast failover for uninterrupted network service. High
availability features ensure traffic flow continues even during outages.
•Radius Server checks the identity of users to keep the network safe and
free from uninvited ‘guests’.
•Storm Control ensures a robust network by managing the amount of traffic
allowed on the network, and dealing with any unexpected surges.
•DHCP server automates the distribution of network addresses to PCs.
•Centralized Timekeeper ensures your network is always working in full
synchronicity.
•Loop Protection guards against accidental wiring mistakes.
VCStack
Create a VCStack with up to four units. VCStack provides a highly available
system where network resources are spread out across stacked units,
reducing the impact if one of the units fails. Aggregating switch ports on
different units across the stack provides excellent network resiliency.
Ethernet Protected Switched Rings (EPSR)
EPSR and 10 Gigabit Ethernet allow several x600 switches to form a highspeed protected ring capable of recovery within as little as 50ms. This feature is
perfect for high performance and high availability in enterprise networks.
Allied Telesis
Page 2
www.alliedtelesis.com
x600-24 AND 48 SERIES | Intelligent Gigabit Layer 3+ Switches
What's new
Dynamic Host Configuration Protocol (DHCP) Snooping
DHCP servers allocate IP addresses to clients, and the switch keeps a record of addresses issued on each port. IP Source Guard checks against
this DHCP snooping database to ensure only clients with specific IP and/or MAC address can access the network. DHCP snooping can be
combined with other features, like Dynamic ARP Inspection, to increase security in layer 2 switched environments, and also provides a traceable
history, which meets the growing legal requirements placed on Service Providers.
sFlow
sFlow is an industry standard technology for monitoring high speed switched networks. It gives complete visibility into the use of networks
enabling performance optimization, accounting/billing for usage, and defence against security threats. Sampled packets sent to a collector ensure
it always has a real-time view of network traffic.
VCStack Fast Failover
Virtual Chassis Stacking (VCStack) delivers resiliency and scalability to networks, simplifying management while increasing performance. Fast
Failover further enhances this advanced solution by providing absolutely minimal network downtime in the event of a problem.
Strong Passwords
Enforcing strong passwords for users of key networking equipment allows network administrators to increase security, and ensure a robust and
reliable infrastructure.
Servers
SwitchBlade x908
x600-24Ts-POE
1 Gigabit link
Link aggregation
Diagram 1: PoE Provision
Allied Telesis
Page 3
www.alliedtelesis.com
x600-24 AND 48 SERIES | Intelligent Gigabit Layer 3+ Switches
Key Solution - Network Access Control (NAC)
One of the major security issues facing enterprise networks is how to prevent internal breaches and malicious software infiltration. Internal defence
requires significant involvement with individual network devices, which is costly and time consuming. NAC lowers this overhead and provides an
effective solution to internal network security.
NAC automates network security policy management, allowing you to easily control network access and manage network security. NAC uses 802.1x
port-based authentication in partnership with standards-compliant dynamic VLAN assignment, to assess a user’s adherence to network security
policies and either grant authentication or offer remediation. Allied Telesis NAC also supports alternatives to 802.1x port-based authentication, such
as web authentication to enable guest access, and MAC authentication for end points that do not have an 802.1x supplicant.
This ‘Tri-Authentication’, shown in Diagram 2 below, provides a way for the network to successfully manage authentication of all devices.
Allied Telesis is also a partner with Microsoft, supporting Microsoft Network Access Protection (NAP) technology. Allied Telesis is committed
to providing secure networks, and interoperability with Microsoft's network access control solution is an important component of an already
comprehensive security set. The Allied Telesis NAC solution also interoperates with many other third party NAC solutions.
Policy
and
RADIUS
Server
x600-24Ts
Tri-authentication
capable switch
802.1x authenticated
device
Web authenticated
device
Policy Decision Point
Policy Enforcement Point
MAC authenticated
device
Access Requestor
Diagram 2: NAC with Tri-authentication
Allied Telesis
Page 4
www.alliedtelesis.com
x600-24 AND 48 SERIES | Intelligent Gigabit Layer 3+ Switches
Key Solution - Virtual Chassis Stacking (VCStack)
VCStack - Resiliency and Stability
Today's modern Enterprise business relies on Information Technology resources and applications to access business-critical information, and for
day-to-day work. A high-availability infrastructure is now of paramount importance. The Allied Telesis x600 series switches provide the ideal
solution with VCStack.
Using VCStack in your network allows multiple switches to appear as a single virtual chassis. In normal operation, this virtual chassis acts as a
single switch, simplifying management.
Diagram 3 shows link aggregation between the core VCStack and the edge switches. With link aggregation across ports on different virtual chassis
members, there is no perceptible disruption in the case of a link failure, and the full bandwidth of the network is available.
VCStack and link aggregation provide a solution where network resources are spread across the virtual chassis members, ensuring device and path
resiliency. Virtualization of the network core ensures access to information when you need it.
Servers
Internet
AR415S
Router
8000S
x600-24Ts
1 Gigabit link
10/100 link
Link aggregation
Diagram 3: VCStack - Resilient Network
Allied Telesis
Page 5
www.alliedtelesis.com
x600-24 AND 48 SERIES | Intelligent Gigabit Layer 3+ Switches
The x600 family provides an extensive range of port-density and uplink-connectivity options when used as aggregation layer switches, or
Gigabit to the desktop edge switches. This scalable switch family can connect anything from a small workgroup right up to a large business.
Diagram 4 shows four x600-48Ts/XP switches connected as a virtual chassis for maximum Gigabit to the desktop or aggregation layer port
density. With the stacking bandwidth provided quite separately from the 10 Gigabit uplink ports, this solution provides a massive 160 Gigabits
of uplink bandwidth to the network core, while the stacking backplane throughput is completely unaffected for maximum performance.
Servers
SwitchBlade x908
8000s
CORE
x600-48Ts/XP
AGGREGATION
x600-48Ts/XP
10 Gigabit link
1 Gigabit link
EDGE
10/100 link
Link aggregation
Diagram 4: VCStack - Scalable Port Density
Whether used to provide a virtual network core, or to maximize port density, the x600 family with VCStack provides resiliency, scalability and
ease of management. VCStack makes networking reliable and simple.
Allied Telesis
Page 6
www.alliedtelesis.com
x600-24 AND 48 SERIES | Intelligent Gigabit Layer 3+ Switches
The x600 24 and 48 Series:
x600-24Ts
24 x 10/100/1000BASE-T (RJ-45) copper ports
4 x 1000BASE-X SFP combo ports
1 x expansion bay for AT-StackXG module
x600-24Ts-POE
24 x 10/100/1000BASE-T (RJ-45) copper ports
with PoE (802.3af), 15.4 Watts per port
4 x 1000BASE-X SFP combo ports
2 x 24 Gbps on board stacking ports
x600-24Ts/XP
24 x 10/100/1000BASE-T (RJ-45) copper ports
4 x 1000BASE-X SFP combo ports
2 x XFP ports
1 x expansion bay for AT-StackXG module
x600-48Ts
44 x 10/100/1000BASE-T (RJ-45) copper ports
4 x 1000BASE-X SFP ports
1 x expansion bay for AT-StackXG module
x600-48Ts/XP
44 x 10/100/1000BASE-T (RJ-45) copper ports
4 x 1000BASE-X SFP ports
2 x XFP ports
1 x expansion bay for AT-StackXG module
Performance
•
Switching Fabric:
x600-24Ts - 96 Gbps
x600-24Ts-POE - 96 Gbps
x600-24Ts/XP - 136 Gbps
x600-48Ts - 144 Gbps
x600-48Ts/XP - 184 Gbps
• Forwarding Rate1:
x600-24Ts - 71.4Mpps
x600-24Ts-POE - 71.4Mpps
x600-24Ts/XP - 101.2Mpps
x600-48Ts - 107.1Mpps
x600-48Ts/XP - 136.9 Mpps
• 48 Gbps of stacking bandwidth
• Extensive wire-speed traffic classification for
ACLs and QoS
• Supports 9KB Jumbo frames
• Wire-speed multicasting
• Up to 16K MAC addresses
• 4K VLANs
• 4K Layer 3 interfaces
• 512MB DDR SDRAM • 64MB Flash Memory
• Packet Buffer Memory
x600-24T - 2MB
x600-48T - 4MB
Reliability
• MTBF
x600-24Ts - 130,000 hours
x600-24Ts-POE - 90,000 hours
x600-24Ts/XP - 130,000 hours
x600-48Ts - 80,000 hours
x600-48Ts/XP - 80,000 hours
• Modular AlliedWare Plus operating system
• Redundant Power Supply available to load
share with internal power supply providing
uninterrupted power and extra reliability
• Full environmental monitoring of PSUs, fans,
temperature and internal voltages. SNMP traps
alert network managers in case of any failure
Power Characteristics
• AC Voltage: 100 to 240V (+/-10% auto ranging)
• Frequency: 47 to 63Hz
Power Consumption
x600-24Ts
87 Watts (297 BTU/hr)
x600-24Ts-POE
Without PoE load 78 Watts (268 BTU/hr)
With I5.4 Watts per port PoE load 462 Watts
(1,579 BTU/hr)
x600-24Ts/XP
87 Watts (297 BTU/hr)
x600-48Ts
112 Watts (382 BTU/hr)
x600-48Ts/XP
112 Watts (382 BTU/hr)
Environmental Specifications
• Operating Temperature Range: 0°C to 40°C
(32°F to 104°F). Derated by 1°C per 305
Meters (1000ft)
• Storage Temperature Range: -25°C to 70°C
(-13°F to 158°F)
• Operating Relative Humidity Range: 5% to 90%
non-condensing
• Storage Relative Humidity Range: 5% to 95%
non-condensing
• Operating Altitude:
3,048 Meters maximum (10,000ft)
Expandability
• 1 expansion bay for AT-StackXG module
supporting 2 high speed 24Gbps stacking ports
(on non PoE models)
• IPv6 routing license option
• Advanced L3 license option
Flexibility and compatibility
• Gigabit SFP ports will support any combination
of 1000BASE-T or1000BASE-X SFPs, 1000BASESX, 1000BASE-LX, or 1000BASE-ZX SFPs
Resiliency
• STP, RSTP, MSTP (802.1s)
• Up to 31Link Aggregation (802.3ad) groups
• Up to 150 VRRP groups
• Up to 16 EPSR domains
• Dynamic Link Failover
• Thrash Limiting
• Loop Detection
• VCStack Fast Failover
Routing
•
•
•
•
Up
Up
Up
Up
to
to
to
to
5K
8K
5K
5K
RIP routes
OSPF routes (with license)
BGP routes (with license)
RIPng routes (with license)
1 Including Stacking ports
Allied Telesis
Page 7
• Route Maps
VLAN support
• Supports 4096 VLANs
• VLAN Double Tagging
Security
• Private VLANs, providing security and port
isolation of multiple customers using the same
VLAN
• Dynamic VLAN assignment
• NAC
• 802.1x support, with multi-supplicant
• MAC-based authentication
• DHCP Snooping
• Web-based authentication
• BPDU Protection
• STP Root Guard
• Strong Passwords
• DoS attack blocking
• ACLs
• Local RADIUS server
Quality of Service
• Policy based QoS features
• Highly configurable traffic classification
• Extensive remarking capabilities
• Control plane traffic prioritization
• Mixed scheduling
• 8 QoS queues per port
• Two-rate three-color (green, yellow, red)
bandwidth metering, with burst sizes for
improved TCP-IP bandwidth limiting performance and bandwidth resolution
down to 64Kbps
• Low switching latency essential for Voice over IP
(VoIP) and real-time streaming media
applications
Management
• The GUI simplifies network performance
monitoring and network event trouble shooting.
• The AlliedWare PlusTM Operating System's rich
Layer 3 feature set and industry-standard CLI
provide you with even greater robustness and
ease of management.
• Console management port on the front panel
for ease of access
• An SD memory card socket on the front panel,
allowing software release files, configurations
and other files to be stored for backup and
distribution to other switches
• Port mirroring
• SSH and SNMPv3 for secure management
• RADIUS Authentication
• RMON (4 groups)
• Broadcast Forwarding to allow the switch
broadcast packets to reach across subnets.
• IP Helper enables broadcasts from clients
in different subnets to be relayed to their
destination, instead of being blocked at the
switch.
• Policy Based Routing (PBR)
• Link Layer Discovery Protocol - Media Endpoint
Discovery (LLDP-MED)
• sFlow
www.alliedtelesis.com
x600-24 AND 48 SERIES | Intelligent Gigabit Layer 3+ Switches
Physical Dimensions
Model
Height
Width
Depth
Mounting
x600-24
44mm
440mm
305mm
1RU rack mount
x600-24Ts-POE
44mm
440mm
408mm
1RU rack mount
x600-48
44mm
440mm
305mm
1RU rack mount
Weights
Product
Unpackaged
Packaged
x600-24Ts
4.50 kg
6.10 kg
x600-24Ts-POE
6.90 kg
8.50 kg
x600-24Ts/XP
4.60 kg
6.20 kg
x600-48Ts
4.90 kg
6.50 kg
x600-48Ts/XP
4.90 kg
6.50 kg
Acoustic Noise
Product
Tested to ISO 7779; front bystander position
x600-24
45.8 dB
x600-24Ts-POE
48.1 dB
x600-48
46.8 dB
Electrical Approvals and Compliances
EMC: EN55022 class A, FCC class A, VCCI class A
Immunity: EN55024, EN61000-3-levels 2 (Harmonics), and 3 (Flicker) - AC models only
Safety
Standards: UL60950-1, CAN/CSA-C22.2 No. 60950-1-03, EN60950-1, EN60825-1, AS/NZS 60950.1
Certification: UL, cUL, TUV
Restrictions on Hazardous Substances (RoHS) Compliance
EU RoHS Compliant
Country of Origin
China
Allied Telesis
Page 8
www.alliedtelesis.com
x600-24 AND 48 SERIES | Intelligent Gigabit Layer 3+ Switches
Standards and Protocols
AlliedWare Plus™ Operating System Version 5.3.4
Authentication
RFC 1321 MD5 Message-Digest Algorithm
RFC 1828 IP Authentication using Keyed MD5
Border Gateway Protocol (BGP)
BGP Dynamic Capability
BGP Graceful Restart
BGP Outbound Route Filtering
Extended Communities Attribute
RFC 1771 Border Gateway Protocol 4 (BGP-4)
RFC 1772 Application of the Border Gateway Protocol in the Internet
RFC 1997 BGP Communities Attribute
RFC 2385 Protection of BGP Sessions via the TCP MD5 Signature Option
RFC 2439 BGP Route Flap Damping
RFC 2796 BGP Route Reflection - An Alternative to Full
Mesh IBGP
RFC 2858 Multiprotocol Extensions for BGP-4
RFC 2918 Route Refresh Capability for BGP-4
RFC 3065 Autonomous System Confederations for BGP
RFC 3107 Carrying Label Information in BGP-4
RFC 3392 Capabilities Advertisement with BGP-4
Diagnostic Tools
Built-In Self Test (BIST)
Ping Polling
Trace Route
Encryption
FIPS 180-1 Secure Hash Standard (SHA-1)
FIPS 186 Digital Signature Standard (RSA)
FIPS 46-3 Data Encryption Standard (DES & 3DES)
Ethernet
IEEE
IEEE
IEEE
IEEE
IEEE
IEEE
IEEE
IEEE
IEEE
802.2 Logical Link Control
802.3 Ethernet CSMA/CD
802.3ab 1000BASE-T
802.3ad Link Aggregation (static & LACP-based dynamic)
802.3af Power over Ethernet (PoE)
802.3ae 10 Gigabit Ethernet
802.3u 100BASE-T
802.3x Flow Control - Full Duplex Operation
802.3z Gigabit Ethernet
General Routing
Directed Broadcast Forwarding
Equal Cost Multi Path (ECMP) routing
Policy-based Routing
UDP Broadcast Helper
RFC 768 User Datagram Protocol (UDP)
RFC 791 Internet Protocol (IP)
RFC 792 Internet Control Message Protocol (ICMP)
RFC 793 Transmission Control Protocol (TCP)
RFC 826 Address Resolution Protocol (ARP)
RFC 894 Standard for the transmission of IP datagrams over Ethernet networks
RFC 903 Reverse ARP
Allied Telesis
RFC
RFC
RFC
RFC
RFC
RFC
RFC
RFC
RFC
RFC
RFC
RFC
RFC
RFC
RFC
RFC
RFC
RFC
RFC
RFC
RFC
RFC
RFC
RFC
RFC
RFC
919 Broadcasting Internet Datagrams
922 Broadcasting Internet Datagrams in the presence of subnets
925 Multi-LAN ARP
932 Subnetwork addressing scheme
950 Internet Standard Subnetting Procedure
951 Bootstrap Protocol (BootP) relay and server
1027 Proxy ARP
1035 DNS Client
1042 Standard for the transmission of IP datagrams over IEEE 802 networks
1071 Computing the Internet checksum
1122 Internet Host Requirements
1191 Path MTU discovery
1256 ICMP Router Discovery Messages
1518 An Architecture for IP Address Allocation with
CIDR
1519 Classless Inter-Domain Routing (CIDR)
1542 Clarifications & Extensions for the Bootstrap Protocol
1591 Domain Name System (DNS)
1700 Assigned Numbers
1812 Requirements for IPv4 Routers
1918 IP Addressing
2131 DHCP for IPv4
2132 DHCP Options and BOOTP Vendor Extensions
2581 TCP Congestion Control
3046 DHCP Relay Agent Information Option (DHCP Option 82)
3232 Assigned Numbers
3993 Subscriber-ID Suboption for DHCP Relay Agent
Option
IPv6 Features
6to4 Tunnelling
IPv4 and IPv6 Dual Stack
IPv6 Management via Ping, TraceRoute, Telnet and SSH
Static Unicast Routes for IPv6
RFC 1886 DNS Extensions to support IPv6
RFC 1887 An Architecture for IPv6 Unicast Address Allocation
RFC 1981 Path MTU Discovery for IPv6
RFC 2460 IPv6 specification
RFC 2461 Neighbour Discovery for IPv6
RFC 2462 IPv6 Stateless Address Autoconfiguration
RFC 2464 Transmission of IPv6 Packets over Ethernet Networks
RFC 2526 Reserved IPv6 Subnet Anycast Addresses
RFC 2553 Basic Socket Interface Extensions for IPv6
RFC 2711 IPv6 Router Alert Option
RFC 2851 Textual Conventions for Internet Work Addresses
RFC 2893 Transition Mechanisms for IPv6 Hosts and Routers
RFC 3056 Connection of IPv6 Domains via IPv4 Clouds
RFC 3484 Default Address Selection for IPv6
RFC 3513 IPv6 Addressing Architecture
RFC 3587 IPv6 Global Unicast Address Format
RFC 3596 DNS Extensions to support IPv6
RFC 4443 Internet Control Message Protocol (ICMPv6)
Page 9
Management
AT Enterprise MIB
SNMP Traps
IEEE 802.1ab Link Layer Discovery Protocol (LLDP)
RFC 1155 Structure and Identification of Management Information for TCP/IP-based Internets
RFC 1157 Simple Network Management Protocol (SNMP)
RFC 1212 Concise MIB definitions
RFC 1213 MIB for Network Management of TCP/
IP-based internets: MIB-II
RFC 1215 Convention for defining traps for use with the SNMP
RFC 1227 SNMP MUX protocol and MIB
RFC 1239 Standard MIB
RFC 1493 Bridge MIB
RFC 2011 SNMPv2 MIB for IP using SMIv2
RFC 2012 SNMPv2 MIB for TCP using SMIv2
RFC 2013 SNMPv2 MIB for UDP using SMIv2
RFC 2096 IP Forwarding Table MIB
RFC 2574 User-based Security Model (USM) for SNMPv3
RFC 2575 View-based Access Control Model (VACM) for SNMP
RFC 2674 Definitions of Managed Objects for Bridges with Traffic Classes, Multicast Filtering and VLAN Extensions
RFC 2741 Agent Extensibility (AgentX) Protocol
RFC 2787 Definitions of Managed Objects for VRRP
RFC 2819 RMON MIB (groups 1, 2, 3, and 9)
RFC 2863 Interfaces Group MIB
RFC 3164 Syslog Protocol
RFC 3176 sFlow: A Method for Monitoring Traffic in
Switched and Routed Networks
RFC 3412 Message Processing and Dispatching for the SNMP
RFC 3413 SNMP Applications
RFC 3418 MIB for SNMP
RFC 3621 PoE MIB
RFC 3635 Definitions of Managed Objects for the Ethernet-
like Interface Types
RFC 3636 IEEE 802.3 MAU MIB
RFC 4188 Definitions of Managed Objects for Bridges
RFC 4318 Definitions of Managed Objects for Bridges with RSTP
RFC 4560 Definitions of Managed Objects for Remote Ping, TraceRoute, and Lookup operations
Multicast Support
Bootstrap Router for PIM-SM
IGMP Fast Leave
IGMP Proxy
IGMP Query Solicitation
IGMP Snooping
RFC 1112 Host extensions for IP multicasting
RFC 2236 Internet Group Management Protocol v2 (IGMPv2)
RFC 2362 PIM-SM
RFC 2710 Multicast Listener Discovery (MLD) snooping
RFC 2715 Interoperability Rules for Multicast Routing
Protocols
RFC 3376 IGMPv3
RFC 3810 Multicast Listener Discovery v2 (MLDv2) snooping
RFC 3973 PIM-DM
RFC 4541 IGMP & MLD snooping switches
www.alliedtelesis.com
x600-24 AND 48 SERIES | Intelligent Gigabit Layer 3+ Switches
Open Shortest Path First (OSPF)
Routing Protocols
Services
Graceful OSPF Restart
OSPF Link-local Signaling
OSPF MD5 Authentication
OSPF Restart Signaling
OSPF TE Extensions
Out-of-band LSDB Resync
RFC 1245 OSPF protocol analysis
RFC 1246 Experience with the OSPF protocol
RFC 1370 Applicability Statement for OSPF
RFC 1765 OSPF Database Overflow
RFC 2328 OSPFv2
RFC 2370 OSPF Opaque LSA Option
RFC 3101 OSPF Not-So-Stubby Area (NSSA) Option
RFC 3509 Alternative Implementations of OSPF Area Border Routers
Route Maps
Route Redistribution (OSPF, BGP, RIP)
RFC 1058 Routing Information Protocol (RIP)
RFC 2080 RIPng for IPv6
RFC 2081 RIPng Protocol Applicability Statement
RFC 2082 RIP-2 MD5 Authentication
RFC 2453 RIPv2
Secure Copy
RFC 854
RFC 855
RFC 857
RFC 858
RFC 1091
RFC 1305
RFC 1350
RFC 1985
RFC 2049
RFC 2554
RFC 2616
RFC 2821
RFC 2822
Quality of Service
Access Control Lists (ACLs)
IEEE 802.1p Priority Tagging
RFC 2211 Specification of the Controlled-Load Network Element Service
RFC 2474 DiffServ Precedence for 8 queues/port
RFC 2475 DiffServ Architecture
RFC 2597 DiffServ Assured Forwarding (AF)
RFC 2697 A Single-Rate Three-Color Marker
RFC 2698 A Two-Rate Three-Color Marker
RFC 3246 DiffServ Expedited Forwarding (EF)
Resiliency Features
Dynamic Link Failover
Ethernet Protection Switched Rings (EPSR)
Loop Protection - Loop Detection
Loop Protection - Thrash Limiting
STP Root Guard
IEEE 802.1D Spanning Tree Protocol (STP) - MAC Bridges
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
IEEE 802.1t - 2001 802.1D maintenance
IEEE 802.1w - 2001 Rapid Spanning Tree Protocol (RSTP)
RFC 3768 Virtual Router Redundancy Protocol (VRRP)
Security Features
BPDU Protection
Configurable Guest and Auth Fail VLANs
DHCP Snooping
Dynamic VLAN Assignment
IEEE 802.1x Port Based Network Access Control
IEEE 802.1x Authentication protocols (TLS, TTLS, PEAP & MD5)
IEEE 802.1x Multi Supplicant authentication
MAC-based authentication
Port Security
Roaming Authentication
SSH Remote Login
SSLv2
SSLv3
Strong Password Security
Web-based Authentication
RFC 2246 TLS Protocol v1.0
RFC 2865 RADIUS
RFC 2866 RADIUS Accounting
RFC 2868 RADIUS Attributes for Tunnel Protocol Support
RFC 3546 Transport Layer Security (TLS) Extensions
RFC 3579 RADIUS Support for Extensible Authentication
Protocol (EAP)
RFC 3748 PPP Extensible Authentication Protocol (EAP)
RFC 4251 Secure Shell (SSHv2) Protocol Architecture
RFC 4252 Secure Shell (SSHv2) Authentication Protocol
RFC 4253 Secure Shell (SSHv2) Transport Layer Protocol
RFC 4254 Secure Shell (SSHv2) Connection Protocol
(SCP)
Telnet protocol specification
Telnet Option Specifications
Telnet Echo Option
Telnet Suppress Go Ahead Option
Telnet terminal-type option
NTPv3
Trivial File Transfer Protocol (TFTP)
SMTP Service Extension
MIME
SMTP Service Extension for Authentication
Hypertext Transfer Protocol - HTTP/1.1
Simple Mail Transfer Protocol (SMTP)
Internet Message Format
User Interface Features
Event-based Triggers
Graphical User Interface (GUI)
Industry-standard CLI with built-in Help
Powerful CLI scripting tool
VLAN Support
Private VLANs
IEEE 802.1ad Provider Bridges (VLAN stacking, Q-in-Q)
IEEE 802.1Q Virtual LANs
IEEE 802.1v VLAN classification by protocol & port
IEEE 802.3ac VLAN tagging
VoIP Support
LLDP-MED ANSI/TIA-1057
Voice VLAN
Ordering Information
10GbE XFP Modules
Module
Description
Specifics
AT-XPSR
10GBASE-SR
850nm Short-haul, 300m with MMF
AT-XPLR
10GBASE-LR
1310nm Medium-haul, 10km with SMF
AT-XPER40
10GBASE-ER
1550nm Long-haul, 40km with SMF
Stacking accessories
Module
Specifics
AT-StackXG-00
Stacking module with one AT-StackXG/0.5-00 cable included. (not required for x600-24Ts-POE)
AT-StackXG/0.5-00
0.5 meter cable for stacking
AT-StackXG/1-00
1 meter cable for stacking
Allied Telesis
Page 10
www.alliedtelesis.com
x600-24 AND 48 SERIES | Intelligent Gigabit Layer 3+ Switches
Product
Description
AT-x600-24Ts
Intelligent Gigabit Layer 3+ Switch
24 x 10/100/1000BASE-T (RJ-45) copper ports
4 x 1000BASE-X SFP combo ports
1 x expansion bay for AT-StackXG module
AT-x600-24Ts-POE
Intelligent Gigabit Layer 3+ Switch
24 x 10/100/1000BASE-T (RJ-45) copper ports with Power over Ethernet (802.3af)
4 x 1000BASE-X SFP combo ports
2 x 24 Gbps on-board stacking ports
AT-x600-24Ts/XP
Intelligent Gigabit Layer 3+ Switch
24 x 10/100/1000BASE-T (RJ-45) copper ports
4 x 1000BASE-X SFP combo ports
2 x XFP ports
1 x expansion bay for AT-StackXG module
AT-x600-48Ts
Intelligent Gigabit Layer 3+ Switch
44 x 10/100/1000BASE-T (RJ-45) copper ports
4 x 1000BASE-X SFP ports
1 x expansion bay for AT-StackXG module
AT-x600-48Ts/XP
Intelligent Gigabit Layer 3+ Switch
44 x 10/100/1000BASE-T (RJ-45) copper ports
4 x 1000BASE-X SFP ports
2 x XFP ports
1 x expansion bay for AT-StackXG module
SFP Modules
Module
Description
AT-SPFX/2
100BASE-FX multi-mode 1310nm fiber up to 2km
AT-SPFX/15
100BASE-FX single-mode 1310nm fiber up to 15km
AT-SPFX/40
100BASE-FX single-mode 1310nm fiber up to 40km
AT-SPFXBD-LC-13
100BASE-BX Bi-Di (1310nm Tx, 1550nm Rx) fiber up to 15km
AT-SPFXBD-LC-15
100BASE-BX Bi-Di (1550nm Tx, 1310nm Rx) fiber up to 15km
AT-SPTX
1000BASE-T 100m Copper
AT-SPSX
1000BASE-SX GbE multi-mode 850nm fiber up to 550m
AT-SPSX/I
1000BASE-SX GbE multi-mode 850nm fiber up to 550m Industrial
AT-SPEX
1000BASE-X GbE multi-mode 1310nm fiber up to 2km
AT-SPLX10
1000BASE-LX GbE single-mode 1310nm fiber up to 10km
AT-SPLX10/I
1000BASE-LX GbE single-mode 1310nm fiber up to 10km Industrial
AT-SPBD10-13
1000BASE-LX GbE Bi-Di (1310nm Tx, 1490nm Rx) fiber up to 10km
AT-SPBD10-14
1000BASE-LX GbE Bi-Di (1490nm Tx, 1310nm Rx) fiber up to 10km
AT-SPLX40
1000BASE-LX GbE single-mode 1310nm fiber up to 40km
AT-SPZX80
1000BASE-ZX GbE single-mode 1550nm fiber up to 80km
Allied Telesis
Page 11
www.alliedtelesis.com
x600-24 AND 48 SERIES | Intelligent Gigabit Layer 3+ Switches
Redundant Power Supplies
For Non PoE Models
Module
Specifics
AT-RPS3204-xx
Chassis for up to 4 redundant power supplies (Chassis includes one power supply and one cable)
AT-PWR3202
Additional 200w redundant power supply with RPS cable
For AT-x600-24Ts-POE
Module
Specifics
AT-RPS3104-xx
Chassis for up to 4 redundant power supplies (Chassis includes one power supply and one cable)
AT-PWR3101
Additional 450w redundant power supply with RPS cable
Where xx =10 for US power cord
20 for no power cord
30 for UK power cord
40 for Asia/Pacific power cord
50 for EU power cord
Feature licenses
Name
Description
Includes
AT-FL-X600-01
x600 Advanced Layer 3 license
• OSPF2
• PIM-SM
• PIM-DM
• BGP4
• VLAN Double Tagging (Q in Q)
AT-FL-X600-02
x600 IPv6 Pack
•
•
•
•
•
AT-FL-RADIUS-FULL
Increase local RADIUS server support limits3
• 5000 users
• 1000 NAS
IPv6 Management
IPv6 Static Routes
IPv6 Unicast Forwarding
RIPng
MLD Snooping
About Allied Telesis
Allied Telesis is part of the Allied Telesis Group. Founded in 1987, the company is a global provider of secure Ethernet/IP access solutions and an industry leader
in the deployment of IP Triple Play networks over copper and fiber access infrastructure. Our POTS-to-10G iMAP integrated Multiservice Access Platform and
iMG intelligent Multiservice Gateways, in conjunction with advanced switching, routing and WDM-based transport solutions, enable public and private network
operators and service providers of all sizes to deploy scalable, carrier-grade networks for the cost-effective delivery of packet-based voice, video and data
services.
Visit us online at www.alliedtelesis.com.
Service and Support
Allied Telesis provides value-added support services for its customers under its Net.Cover
programs. For more information on Net.Cover support programs available in your area, contact your Allied Telesis sales representative or visit our website.
RoHS
Allied Telesis RoHS-compliant product conforms to the European Union Restriction of the Use of Certain Hazardous Substances (RoHS) in Electrical and
Electronic equipment. Allied Telesis ensures RoHS conformance by requiring supplier Declarations of Conformity, monitoring incoming materials, and
maintaining manufacturing process controls.
2 The standard switch software supports 64 OSPF routes. The Advanced Layer 3 license supports 8K OSPF routes.
3 100 users and 24 NAS can be stored in local RADIUS database with base software.
USA Headquarters | 19800 North Creek Parkway | Suite 100 | Bothell | WA 98011 | USA | T: +1 800 424 4284 | F: +1 425 481 3895
European Headquarters | Via Motta 24 | 6830 Chiasso | Switzerland | T: +41 91 69769.00 | F: +41 91 69769.11
Asia-Pacific Headquarters | 11 Tai Seng Link | Singapore | 534182 | T: +65 6383 3832 | F: +65 6383 3830
www.alliedtelesis.com
© 2010 Allied Telesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners.
Page 12
617-000171 Rev G