DATASHEET
Wireless Access Points
High-performance, Enterprise-class WLAN Access Points
Full 802.11n 3x3 MIMO functionality
using standard 802.3af PoE
Easy and cost-effective migration path to
802.11n
Comprehensive wireless security services
for authentication, encryption, IPS, and NAC
Flexible architecture supports centralized
and/or distributed traffic forwarding for
voice/video/data applications
Policy enforcement and rate limiting at
the AP support diverse deployments
Unified wired/wireless role-based access control with guest networking
Product Overview
The Enterasys Wireless solution optimizes distribution of the processing load between Access
Points (APs) and wireless controllers to deliver exceptional performance while remaining easy
to manage. Complex, time-sensitive functions such as QoS, encryption, policy enforcement,
rate limiting, and dynamic channel selection are handled by the AP, while global functions
like configuration, roaming, security management, and policy control are centralized at the
wireless controller or the Enterasys Network Management Suite (NMS) console. Furthermore, the
innovative Enterasys Wireless solutions-oriented architecture is able to determine how to forward
traffic for the highest performance and reliability for each application. The result is a flexible and
dependable WLAN infrastructure that can easily be leveraged to deploy VoWLAN and new highperformance solutions such as HD video.
Enterasys Wireless Access Points are available in the following models:
• AP3605 – dual radio 802.11a/b/g/n thin AP with internal dual-band antennas
• AP3610/3620 – dual radio 802.11a/b/g/n thin APs with internal/external dual-band antennas
• AP3630/3640 – dual radio 802.11a/b/g/n standalone indoor APs with internal/external dualband antennas
• AP2605 – dual radio 802.11a/b/g thin AP with integrated antennas
• AP2610/2620 – dual radio 802.11a/b/g thin APs with internal/external antennas
• AP2630/2640 – dual radio 802.11a/b/g standalone APs with internal/external antennas that
can optionally be configured to operate in thin mode - Europe only
Benefits
Business Alignment
• Support for demanding voice/video/data
applications to enhance mobile worker
productivity and convenience
• Role-based grouping of users, devices,
and applications to deliver priority, QoS,
and security in accordance with business needs
• Seamless roaming across an entire
multi-subnet campus without the need for
cumbersome client software
• Integrated management, security, and
QoS features reduce operating cost and
ensure a consistent user experience
regardless of location
Operational Efficiency
• Centralized visibility and control from
Enterasys Wireless Management Suite
and Enterasys NMS accelerate problem
resolution, optimize network utilization,
and automate management
• Migrate to 802.11n without requiring
power, switching, or cabling upgrades
• Adaptive architecture reduces complexity
and optimizes information flow for each
application
• Dynamic Radio Management ensures
optimal AP coverage and maximizes the
availability and quality of wireless service
across the enterprise
• Wireless Distribution Service (WDS)
enables Enterasys Access Points to
wirelessly interconnect while extending
WLAN service to distant areas
• Flexible Client Access optimizes
throughput for 802.11n clients in today’s
mixed a/b/g and n client environments
• AP2650/2660 – dual radio 802.11a/b/g thin outdoor industrial APs with internal/
external antennas
Purpose-built to enable voice and HD video communications across the WLAN, the Enterasys
Wireless dual radio, 3x3 MIMO 802.11n wireless access points can be powered by a standard
IEEE 802.3af PoE port found on most switches that form today’s wired networking infrastructure
There is nothing more important
than our customers.
– making wireless mobility more practical, achievable, and cost-effective. This means that
Enterasys 802.11n APs do not require a costly upgrade to higher power 802.3at PoE switches.
Similarly, enterprises are not required to pull extra Ethernet cables for additional power or limit the
performance of APs by disabling a radio or falling back to 2x3 or 2x2 MIMO operation.
Enterasys Wireless APs use the most sophisticated standards to ensure effective security and
client compatibility. Using the 802.11i (WPA2) standard, wireless LAN deployments can utilize
802.1X or PSK authentication and AES, TKIP, or WEP encryption. These options ensure secure
authentication and seamless integration of the APs with the wired network infrastructure.
Enterasys Wireless APs work together to prevent interference and optimize RF sharing. Each AP is
able to intelligently and dynamically adjust its transmit power and channel based on information
related to neighboring APs as well as external interference or channel occupation. This ensures
optimal performance for all wireless clients. If an AP fails, neighboring APs will increase power to
maintain coverage in the affected area. The APs also support RF channel plan selection with the
option of supporting 3-channel, 4-channel or a fully custom configuration.
802.11n
Enterasys Wireless 802.11n APs are exceptionally power-efficient, ensuring that they can run on
industry-standard 802.3af PoE infrastructure. Many 802.11n APs exceed the power consumption
limits of the 802.3af standard specification for PoE when configured for 3x3 MIMO on both
radios (Note: AP3605 supports 2x3 MIMO only). These solutions demand the use of AC power
adaptors or costly upgrades to pre-standard or proprietary PoE infrastructures to achieve optimal
RF performance.
Exceptional performance is delivered utilizing the 3x3 statistical diverse transmit function.
802.11n AP performance gains are best achieved in the 5 GHz band where more non-overlapping
channels are available. To achieve the optimal 300 Mbps data rate, the Enterasys Wireless
802.11n AP can be configured to use channel bonding, combining two adjacent 20 MHz
channels into a single 40 MHz channel. Additionally, the Enterasys Wireless 802.11n APs are
DFS compliant and can offer up to 11 non-overlapping, bonded channels in the 5 GHz band
depending on the regulatory domain. This provides more flexibility when building high-throughput
networks than with 802.11 APs which are not DFS compliant, as they are restricted to only 4 nonoverlapping bonded channels.
Plug and Play
Enterasys Wireless Access Points will securely and automatically register with an available wireless
controller and download their configurations, simplifying deployment and operational effort. APs
can immediately provide service to users without having to be manually configured.
Adaptive Solutions-Oriented WLAN Architecture
Most WLAN solutions force network administrators to choose between a centralized or distributed
architecture. A significant advantage of Enterasys Wireless is that it can support both deployment
models simultaneously, offering significant flexibility benefits over other solutions. Network
administrators can assign a topology (centralized or distributed) via policy to an individual user
or group of users. A specific SSID can also be statically mapped to a given topology without any
restrictions, so that the wireless LAN infrastructure can efficiently adapt to customer-specific
business requirements and applications.
Benefits (cont.)
Security
• Authentication and authorization
functions include role-based access
control (using 802.1X, MAC, and captive
portal) and authentication at the AP
(802.1X supplicant)
• Standards-based encryption at the AP
(802.11i, WEP, TKIP, WPA, WPA2, WPAPSK, WPA2-PSK, and WPA2-AES)
• Wireless Intrusion Prevention (WIPS)
functions provide continuous scanning,
threat classification, rogue AP detection,
and countermeasures against possible attacks
• AP personality can change to full time
and part time sensors to perform Wireless
Intrusion Detection and Prevention
(WIPS) for effective detection and
prevention of rogue APs and other threats
• Integration of security policies (NAC,
IPS) across the wired/wireless networks
enables quick diagnosing and resolution
of security threats
• Integration of Policy Manager across
the wired/wireless networks dynamically
oversees user access at the wireless
network point of entry
Support and Service
• Industry-leading customer satisfaction
and first call resolution rates
• Lifetime warranty for indoor access points
• Personalized services, including site
surveys, network design, installation, and training
A centralized architecture requires all traffic to be backhauled to a centralized controller. With the
higher data rates of 802.11n APs, traffic loads on the wired network can be much greater than
those created by legacy 802.11a/b/g APs. Depending on the size of the WLAN deployment and
how much data is forwarded to the centralized controller, significant congestion may result.
A fully distributed deployment eliminates backhauling traffic to a controller but increases the
processing complexity for real-time mobile applications that require seamless cross-subnet
roaming (e.g. VoWLAN). This can force IT managers to either create a large broadcast domain or
apply many VLANs.
Page 2
With Enterasys Wireless, network administrators are able to create
WLAN services and policies, which together can dynamically assign
traffic forwarding rules to users and groups, limit data flows and control
admission on a per user and per SSID basis. With the flexibility to
provision services and enforce policies at the AP, wireless traffic can be
bi-directionally limited to user-defined thresholds, filtered, and locally
switched without the need to tunnel it back to the controller. In both
cases, unwanted traffic does not traverse costly WANs or aggregating
switches before being dropped at the controller. This is achieved by
the unique ability to perform packet inspection at the AP, where the
requested service and destination is identified and then used to filter,
switch, or rate limit accordingly. The result is optimized responsiveness
and performance for users and services. Easily adapted to diverse
customer network configurations whether they comprise single
building, local campus or routed remote offices, the Enterasys Wireless
solutions-oriented architecture simplifies deployment and reduces
implementation costs.
Survivable Branch Office
Administrators can cost-efficiently deliver WLAN services for users at
remote sites without the need to purchase or manage a local controller.
Combining built-in user-based policy management and captive portal
capabilities, branch users, including guests experience premium
performance with direct access to local resources such as Internet,
printers and other specialized services. Traffic filtering, rate limiting,
and exception handling of unauthorized users continues even when
connection to the controller is lost.
Dynamic Radio Management (DRM)
Each Enterasys Wireless Access Point supports DRM. Although DRM is
centrally managed and configured by the controller, DRM functions as a
fully distributed system managing channels and transmit power allowing
the WLAN infrastructure to adapt to RF interference (802.11 and
others), heavy channel utilization, and AP failures.
Flexible Client Access (FCA)
Flexible Client Access is an access technique that can significantly
improve the throughput for 802.11n clients in mixed a/b/g and n
environments. FCA operates by ensuring equal airtime for all clients in
environments with a mix of 802.11n and 802.11a/b/g devices. Network
administrators can step-wise adjust this capability on a per WLAN service
basis to improve responsiveness for all users and to maximize overall
throughput across the wireless link.
Full RF Survivability
To ensure uninterrupted access, Enterasys Wireless Access Points
automatically adjust their settings to continue to optimally service clients
when adjacent APs fail or when the link back to the controller is lost.
Security
Enterasys Wireless APs provide strong encryption and authentication with
the use of 802.11i standards and captive portal.
Enterasys Wireless APs can be configured as part time or full time
sensors to detect rogue APs or to detect and contain security threats with
the Wireless Management Suite (WMS) Wireless Intrusion Prevention
System (WIPS).
In addition, each AP can be configured with a certificate enabling the AP
to authenticate to the wired network. The network is then fully protected
against attempted re-use of the Ethernet port by unplugging the AP and
connecting directly to the Ethernet cable, as a point of entry into the
corporate network.
Quality of Service (QoS)
Enterasys Wireless APs support extensive functionality to ensure the
best service for all multimedia applications. Enterasys Wireless APs use
IP DiffServ/Precedence/TOS and 802.11e WMM to differentiate and
prioritize wireless traffic. On the wired side, IP DiffServ/Precedence/TOS,
and 802.1p are used to differentiate and prioritize traffic.
For 802.11 traffic, Enterasys Wireless APs support additional QoS
features including 802.11e TSPEC (Call Admission Control) and U-APSD
(automatic power save) to ensure high quality and power efficient
services for voice, video, and data applications.
In addition, the original packet IP prioritization can be maintained on
both the wireless and wired networks by enabling the Adaptive QoS
mechanism. This feature allows tunneled and wireless packets to retain
their IP prioritization value end-to-end. Furthermore, Enterasys Wireless
APs allow IT managers to define custom mappings of different types of
prioritization schemes to ensure that user traffic is properly differentiated
when entering the wired network.
Bandwidth Control and Prioritized Service Delivery
Enterasys Wireless provides administrators with the means to control
bandwidth utilization and prioritize service delivery. Unique, granular
packet inspection capabilities at the AP continuously monitor and assess
user and service destinations. Based on topology, filter rules and data
rate thresholds defined in the user policy, a packet may be tunneled back
to the controller, switched at the AP, or dropped. A user who violates a
rate limit policy attribute could, for example, be directed to a quarantine
segment attached to local AP or further rate limited.
Enterasys RoamAbout Access Point Investment Protection
Previous investments in the Enterasys RoamAbout® 4102 Access Points
can be leveraged through software upgrades that enable Enterasys
Wireless operation.
In addition, Enterasys Wireless APs can be configured to dynamically
redirect traffic to a secondary wireless controller if the primary wireless
controller fails. When the failover mode is enabled, APs automatically
register to both a primary and secondary wireless controller, ensuring high
availability of the WLAN service and robustness for real-time applications
Page 3
Enterasys Wireless Access Points
Supported Features – 802.11a/b/g/n
AP3605
AP3610
AP3620
AP3630
AP3640
Plug’n Play Installation
• Automatic Controller Discovery
• Centrally deployed configurations and
upgrades
√
√
√
√
Thin mode only
√
Thin mode only
Web Management and Configuration
√
√
√
√
√
Secure Remote Management
√
√
√
√
√
Number of SSIDs Supported
16
16
16
16
16
Security via WEP, WPA (TKIP), WPA2 (AES),
802.11i, 802.1X
√
√
√
√
√
VPN Support: IPSec, PPTP, L2TP
√
√
√
√
√
Rogue AP Detection mode
-
√
√
√
Thin mode only
√
Thin mode only
Rogue AP Sensor mode
-
√
√
√
Thin mode only
√
Thin mode only
Intelligent thin AP
(Encryption, blacklisting, QoS and RF
Management done by the AP)
√
√
√
√
Thin mode only
√
Thin mode only
Filtering at AP: traffic switching, policy
enforcement, rate limiting
√
√
√
√
Thin mode only
√
Thin mode only
Wireless Distribution System (WDS)
-
√
√
√
√
Fast failover and Session Availability
√
√
√
√
Thin mode only
√
Thin mode only
Dynamic RF Management
√
√
√
√
√
Flexible Client Access (airtime fairness)
√
√
√
√
Thin mode only
√
Thin mode only
Load Balancing / Band-steering
√
√
√
√
Thin mode only
√
Thin mode only
Multicast Rate Control
√
√
√
√
Thin mode only
√
Thin mode only
Dual concurrent, Dual band 802.11a (5GHz)
and 802.11b/g (2.4GHz) connectivity
√
√
√
√
√
Dual concurrent, Dual band 802.11a/n
(5GHz) and 802.11b/g/n (2.4GHz)
connectivity
√
√
√
√
√
2x3
3x3
3x3
3x3
3x3
Quality of Service (WMM, 802.11e)
√
√
√
√
√
Call Admission Control (TSPEC)
√
√
√
√
√
Power Save (U-APSD)
√
√
√
√
√
Fast secure roaming and handover between APs
√
√
√
√
√
Pre-Authentication (Pre-Auth)
√
√
√
√
√
Opportunistic Key Caching (OKC)
√
√
√
√
√
Simultaneous Voice calls
(802.11b, G711, R>80)
12
12
12
12
12
Simultaneous users per radio
128
128
128
128
128
Management
Security
Performance
802.11n MIMO support
Voice
Capacity
Page 4
Enterasys Wireless Access Points
Supported Features – 802.11a/b/g
AP2605
AP2610/2620
AP2630/2640
AP4102
AP2650/2660
Plug’n Play Installation
• Automatic Controller Discovery
• Centrally deployed configurations and
upgrades
√
√
√
Thin mode only
√
Thin mode only
√
Web Management and Configuration
√
√
√
√
√
Secure Remote Management
√
√
√
√
√
Number of SSIDs Supported
16
16
8 – standalone
16 – thin mode
8 – standalone
16 – thin mode
16
Security via WEP, WPA (TKIP), WPA2 (AES),
802.11i, 802.1X
√
√
√
Does not support
802.1X
√
√
VPN Support: IPSec, PPTP, L2TP
√
√
√
√
√
Rogue AP Detection mode
√
√
√
Thin mode only
√
Thin mode only
√
Rogue AP Sensor mode
-
√
√
-
-
Management
Security
Thin mode only
Performance
Intelligent thin AP
(Encryption, blacklisting, QoS and RF
Management done by the AP)
√
√
√
Thin mode only
√
Thin mode only
√
Filtering at AP: traffic switching, policy
enforcement, rate limiting
-
√
√
Thin mode only
√
Thin mode only
√
Wireless Distribution System (WDS)
-
√
√
Thin mode only
√
Thin mode only
√
Fast failover and Session Availability
√
√
√
Thin mode only
√
Thin mode only
√
Dynamic RF Management
√
√
√
Thin mode only
√
Thin mode only
√
Flexible Client Access (airtime fairness)
√
√
√
Thin mode only
√
Thin mode only
√
Multicast Rate Control
√
√
√
Thin mode only
√
Thin mode only
√
Dual concurrent, Dual band 802.11a (5GHz)
and 802.11b/g (2.4GHz) connectivity
√
√
√
√
√
Quality of Service (WMM, 802.11e)
√
√
√
√
√
Call Admission Control (TSPEC)
√
√
√
√
√
Power Save (U-APSD)
√
√
√
√
√
Fast secure roaming and handover between APs
√
√
√
√
√
Pre-Authentication (Pre-Auth)
√
√
√
Thin mode only
√
Thin mode only
√
Opportunistic Key Caching (OKC)
√
√
√
Thin mode only
√
Thin mode only
√
Simultaneous Voice calls
(802.11b, G711, R>80)
12
12
6 – standalone
12 – thin mode
6 – standalone
12 – thin mode
12
Simultaneous users per radio
128
128
128
128
128
Voice
Capacity
Page 5
Technical Specifications
AP3605/AP3610/AP3620/AP3630/AP3640
Data Rate
• 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
• 802.11b: 1, 2, 5.5, 11 Mbps
• 802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps
• MIMO Mode HT20 (1 data stream): 6.5, 13, 19.5, 26, 39, 52, 58.5, 65 Mbps
• MIMO Mode HT20 (2 data streams): 13, 26, 39, 52, 78, 104, 117, 130 Mbps
• MIMO Mode HT40 Normal GI (1 data stream): 13.5, 27, 40.5, 54, 81, 108, 121.5, 135 Mbps
• MIMO Mode HT40 Normal GI (2 data streams): 27, 54, 81, 108, 162, 216, 243, 270 Mbps
• MIMO Mode HT40 Short GI (1 data stream): 15, 30, 45, 60, 90, 120, 135, 150 Mbps
• MIMO Mode HT40 Short GI (2 data streams): 30, 60, 90, 120, 150, 180, 240, 270, 300 Mbps
Frequency Bands *
802.11a/n:
• 5.15 to 5.25 GHz (FCC / IC / ETSI)
• 5.25 to 5.35 GHz (FCC / IC / ETSI)
• 5.47 to 5.725 GHz (FCC / IC / ETSI)
• 5.725 to 5.850 GHz (ETSI)
802.11b/g/n:
• 2.400 to 2.4835 GHz (FCC / IC / ETSI)
Dynamic Channel Control
DFS & TPC support (ETSI)
Wireless Modulation
• 802.11a: OFDM
• 802.11n: 3x3 MIMO (2x3 MIMO with AP3605) and 2 spatial streams
• 802.11g: DSSS and OFDM
• 802.11b: DSSS
Antennas
AP3605/AP3610/AP3630: Six Internal Antennas
• 2.4 GHz / 5.0 GHz - 3 / 6 dBi Gain (omni)
AP3620/AP3640: Three External Antennas (detachable)
• 2.4 GHz / 5.0 GHz - 4 / 5 dBi Gain (omni)
Interface and Indicators
Auto-sensing 10/100/1000 Base-T interface. LED indicating AP status and connectivity
Serial Console interface
Receive Sensitivity (typical)
• 802.11a: 6 Mbps/-93 dBm, 54 Mbps/-80 dBm
• 802.11n 5 GHz HT20 Mode: 6.5 Mbps(MCS0)/-94 dBm, 130 Mbps(MCS15)/-72 dBm
• 802.11n 5 GHz HT40 Mode: 15 Mbps(MCS0)/-89 dBm, 300 Mbps(MCS15)/-68 dBm
• 802.11b: 1 Mbps/-93 dBm, 11 Mbps/-90 dBm
• 802.11g: 6 Mbps/-92 dBm, 54 Mbps/-81 dBm
• 802.11n 2.4 GHz HT20 Mode: 6.5 Mbps(MCS0)/-94 dBm, 130 Mbps(MCS15)/-74 dBm
• 802.11n 2.4 GHz HT40 Mode: 15 Mbps(MCS0)/-88 dBm, 300 Mbps(MCS15)/-69 dBm
Power
802.3af Power over Ethernet, Class 0 (12.95 Watts Max)
• Typical Power: 11 Watts
• Optional DC Power Supply: Input 100 - 240 VAC, Output: 48 VDC, .38 A maximum, 0 to +40º C
Available Transmit Power *
802.11a (FCC / IC) ( OFDM \ HT20 \ HT40):
• 5.15 to 5.25 GHz: 15 dBm \ 15 dBm \ 15 dBm
• 5.25 to 5.35 GHz: 18 dBm \ 18 dBm \ 15 dBm
• 5.725 to 5.850 GHz: 22 dBm \ 22 dBm \ 22 dBm
802.11a (ETSI) (OFDM \ HT20 \ HT40):
• 5.15 to 5.35 GHz: 17 dBm \ 17 dBm \ 17 dBm
• 5.500 to 5.700 GHz: 22 dBm \ 22 dBm \ 20 dBm
802.11b: (FCC / IC) (CCK \ OFDM \ HT20 \ HT40):
• 2.400 to 2.4835 GHz: 23 dBm \ 19 dBm \ 21 dBm \ 18 dBm
802.11b: (ETSI) (CCK \ OFDM \ HT20 \ HT40):
• 2.400 to 2.4835 GHz: 15 dBm \ 15 dBm \ 15 dBm \ 15 dBm
Compliance/Standards
Ethernet IEEE 802.3 / 802.3u / 802.3af; Wireless IEEE 802.11a/b/g/n; CSMA/CA (DCF/EDCF), WPA, WPAv2, WMM
Safety
UL / IEC / EN 60950-1 ; CAN/CSA 22.2 # 60950-1-03 UL 2043 Plenum Rating European 2006/95/EC Low Voltage Directive
Page 6
Technical Specifications
AP3605/AP3610/AP3620/AP3630/AP3640
EMC & Radio
• FCC CFR 47 Part 15.107 and 15.109 Class B (FCC 47 CFR, Part 15.205, 15.207, 15.209, FCC 47 CFR, Part
2.109, 2.1093, FCC OET No. 65)
• FCC 47 CFR, Part 15.247, Part 15.407
• ICES-003 Class B
• RSS-210, RSS-102 (RF Exposure)
• R&TTE Directive 1999/5/EC
• EN 301 893
• EN 300 328
• 89/336/EEC EMC Directive
• EN 301 489 -1 & 17
• EN55011/CISPR 11 Class B, Group 1 ISM
• EN55022/CISPR 22 Class B
• EN55024/CISPR 24
• EN 300 386
• EN / UL 60601-1-2
• EN 50385
Dimensions and Weight
214.6 mm x 180.8 mm x 55 mm (8.4” x 7.1” x 2.2”)
• AP3605/AP3610/AP3630 weight: 628.4 g (22.2 oz)
• AP3620/AP3640 weight: 649 g (22.9 oz)
Environmental
Operating: Temperature 0º C to 50º C (32º F -122º F), Humidity 0%-95%, (non-condensing)
Storage: Temperature -5º C to 50º C (23º F -122º F)
Transportation: Temperature -40º C to 70º C (-40º F - 158º F)
2002/95/EC (RoHS Directive), 2002/96/EC (WEEE Directive),
Ministry of Information Order #39 (China RoHS)
Technical Specifications
AP2605
Data Rate
• 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
• 802.11b: 1, 2, 5.5, 11 Mbps
• 802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps
AP2610/2620/2630/2640/4102
AP2650/2660
Frequency Bands *
802.11a:
• 5.15 to 5.25 GHz (FCC / IC / ETSI)
802.11b/g
• 2.400 to 2.4835 GHz (FCC / IC / ETSI)
Dynamic Channel Control
DFS & TPC support (ETSI)
Wireless Modulation
• 802.11a: OFDM
• 802.11b: DSSS
• 802.11g: DSSS and OFDM
Antennas
Two Integrated External Antennas
• 2.4 / 5.0 GHz - 2 / 5 dBi Gain (omni)
Interface and Indicators
Auto-sensing 10/100bT Ethernet interface. LED indicating AP status and connectivity
AP4102 has 1 x RS232 Console interface.
Receive Sensitivity (typical)
• 802.11a: 6 Mbps/-88 dBm, 36 Mbps/-77
dBm, 48 Mbps/-73 dBm, 54 Mbps/-69 dBm
• 802.11b: 1 Mbps/-93 dBm, 2 Mbps/-90
dBm, 5.5 Mbps/-90 dBm, 11 Mbps/-87 dBm
• 802.11g: 6 Mbps/-88 dBm, 36 Mbps/-77
dBm, 48 Mbps/-72 dBm, 54 Mbps/-70 dBm
• 802.11a: 6 Mbps/-89 dBm, 36 Mbps/-78 dBm, 48 Mbps/-73 dBm, 54 Mbps/-70 dBm
• 802.11b: 1 Mbps/-91 dBm, 2 Mbps/-90 dBm, 5.5 Mbps/-89 dBm, 11 Mbps/-87 dBm
• 802.11g: 6 Mbps/-89 dBm, 36 Mbps/-79 dBm, 48 Mbps/-74 dBm, 54 Mbps/-72 dBm
Power
• 802.3af Power over Ethernet, Class 0 (12.95
Watts Max)
• AC Power Adaptor - 5 VDC, 2 A
• 802.3af Power over Ethernet, Class 0 (12.95
Watts Max)
• AC Power Adaptor
• AP2610/20/30/40: 6 VDC, 1700 mA max
• AP4102: 48 VDC, 270 mA
Available Transmit Power *
• 802.11a: – 5.15 to 5.25 GHz: 17 dBm (FCC/IC/ETSI)
• 802.11b: 15 dBm (FCC/IC/ETSI)
• 802.11g: 18 dBm (FCC/IC/ETSI); Transmit
(selectable per radio): – 100%, 50%, 25%
• 802.11a: – 5.15 to 5.25 GHz: 17 dBm (FCC/IC), 18 dBm (ETSI); 5.25 to 5.35 GHz: 18 dBm (FCC/IC/ETSI); – 5.470 to 5.725 GHz: 18 dBm (ETSI); – 5.725 to 5.850 GHz: 15 dBm (FCC/IC)
802.11a:
• 5.15 to 5.25 GHz (FCC / IC / ETSI)
• 5.25 to 5.35 GHz (FCC / IC / ETSI)
• 5.47 to 5.725 GHz (ETSI)
• 5.725 to 5.850 GHz (FCC / IC)
802.11b/g:
• 2.400 to 2.4835 GHz (FCC / IC / ETSI)
802.11a:
• 5.15 to 5.25 (FCC / IC / ETSI)
• 5.25 to 5.35 GHz (ETSI)
• 5.47 to 5.725 GHz (ETSI)
• 5.725 to 5.850 GHz (FCC / IC)
802.11b/g
• 2.400 to 2.4835 GHz (FCC / IC / ETSI)
AP2610/30: Two Internal Antennas
• 2.4 / 5.0 GHz - 4 dBi Gain (omni)
AP2620/40: Two External Antennas
(detachable)
• 2.4 / 5.0 GHz - 4 / 5 dBi Gain (omni)
AP4102: Two Internal Antennas :
• Internal dual-band diversity omni antennas
with connectors for optional external antennas.
• External antenna connections: 1 reverse
polarity SMA connector for 802.11a; 1 reverse
polarity SMA connector for 802.11b/g AP2650: Internal Antennas
• 2.4 / 5.0 GHz - 3 / 4 dBi (omni)
AP2660: External Antennas
(not included)
• 4 reverse polarity SMA connectors
(2 per radio)
• Various high-gain directional and
omni-directional antennas are
approved.
• 802.3af Power over Ethernet, Class O (12.95 Watts Max)
• 48 VDC – 15 W
• 110-230 VAC – 15 W
Note 1: AP4102 does not operate on 5.25 GHz to 5.725 GHz (FCC/IC/ETSI)
Note 2: AP2650/60 does not operate on 5.25 to 5.725 GHz (FCC)
• 802.11b/g: 18 dBm (FCC/IC),15 dBm (ETSI); Transmit (selectable per radio): – 100%, 50%, 25%, 12.5%, 6.25%
Page 7
Technical Specifications
AP2605
Compliance/Standards
Ethernet IEEE 802.3 / 802.3u / 802.3af; Wireless IEEE 802.11a/b/g; CSMA/CA (DCF/EDCF), WPA, WPAv2, WMM
AP2610/2620/2630/2640/4102
AP2650/2660
Safety
UL / IEC / EN 60950-1; CAN/CSA 22.2 # 60950-1-03
UL / IEC / EN 60950-1; CAN/CSA 22.2 #
60950-1-03
UL 2043 Plenum Rating
IEC / EN 60950 - 1; UL / CSA 60950-1
UL HAZLOC, FM, ATEX
EMC & Radio
FCC CFR 47 Part 15, Class B
ICES-003 Class B
EN 301 893 V1.2.3
EN 300 328 V1.6.1
EN 301 489 1 & 17
EN 55022:2006
EN 61000-3-2:2006
EN 60950-1:2006
EN 300 328 V1.7.1
EN 301 489-1 V1.6.1
EN 301 489-17 V1.3.2
EN 301 893 V1.4.1
EN 50385:2002
EN 50401:2006
FCC CFR 47 Part 15, Class B
ICES-003 Class B FCC Subpart C 15.247
FCC Subpart E 15.407
RSS-210
EN 301 893 V1.2.3 EN 300 328 V1.6.1
EN 301 489 1 & 17
EN / UL 60601-1-2
EN 50385
EN 55011 (CISPR 11) Class B Group 1ISM
EN 301 489-1 V1.6.1
EN 301 489-17 V1.2.1
EN 300 328 V1.6.1
EN 301 893 V1.3.1
EN 50385
1999/519/EC
FCC CFR 47 Part 15, Class B
Dimensions and Weight
20.9 cm (8.2”) x 12.5 cm (4.9”) x 2.6 cm (1.0”)
650 g (22.9 oz)
AP2610/20/30/40: 40 mm x 115 mm x 175 mm
(1.5” x 4.5” x 7”)
AP4102: 21.83 cm (8.6”) x 13.73 cm (5.4”) x
3.27 cm (1.3”)
AP2610/30 weight: 272 g (9.6 oz)
AP2620/40 weight: 363 g (12.8 oz)
AP4102 weight: 798 g (28.2 oz)
(W x H x D) 251 mm x 251 mm x 72
mm (9.9” x 9.9” x 2.8”)
Without optional PS adaptor: 2241 g
(79.1 oz)
With optional AC PS adaptor: 2433 g
(85.8 oz)
Environmental
• Operating Temp: 0 to 50º C (32 to 122º F)
• Storage Temp: 0 to 70º C (32 to 158º F)
• Humidity: 15% to 95% (non-condensing)
• Operating Temp: 5º C to 40º C (41 - 104º F)
• Storage Temp: -40º C to 85º C (-40 - 185º F)
• Humidity: 10% to 95% (non-condensing)
• Operating Temp: -40 to 70º C (+60º C
with optional Power Supply)
• Storage Temp: -40 to 85º C
• Protection – IP65, NEMA 4x
• Humidity 95%
* Bands, frequency and maximum power settings will vary according to channel and individual country settings.
Page 8
Ordering Information
Part Number
Description
Thin Access Points
WS-AP2605
Dual Radio 802.11a/b/g indoor access point with two integrated dual-band diversity omnidirectional antennas
WS-AP2605-IL
Dual Radio 802.11a/b/g indoor access point with two integrated dual-band diversity omnidirectional antennas - Israel
WS-AP2610
Dual Radio 802.11a/b/g indoor access point with two internal dual-band diversity omnidirectional antennas
WS-AP2610-IL
Dual Radio 802.11a/b/g indoor access point with two internal dual-band diversity omnidirectional antennas - Israel
WS-AP2620
Dual Radio 802.11a/b/g indoor access point with two detachable dual-band diversity omnidirectional antennas
WS-AP2620-IL
Dual Radio 802.11a/b/g indoor access point with two detachable dual-band diversity omnidirectional antennas - Israel
WS-AP2650
Dual Radio 802.11a/b/g outdoor access point with internal dual-band diversity omnidirectional antennas
WS-AP2650-IL
Dual Radio 802.11a/b/g outdoor access point with internal dual-band diversity omnidirectional antennas - Israel
WS-AP2660
Dual Radio 802.11a/b/g outdoor access point with four RP SMA connectors (Note: antennas not included)
WS-AP2660-IL
Dual Radio 802.11a/b/g outdoor access point with four RP SMA connectors - Israel (Note: antennas not included)
WS-AP3605
Dual Radio 802.11a/b/g/n indoor access point with six internal dual-band omnidirectional antennas (Note: 2x3 MIMO)
WS-AP3605-IL
Dual Radio 802.11a/b/g/n indoor access point with six internal dual-band omnidirectional antennas (Note: 2x3 MIMO) - Israel
WS-AP3610
Dual Radio 802.11a/b/g/n indoor access point with six internal dual-band omnidirectional antennas
WS-AP3610-IL
Dual Radio 802.11a/b/g/n indoor access point with six internal dual-band omnidirectional antennas - Israel
WS-AP3620
Dual Radio 802.11a/b/g/n indoor access point with three detachable dual-band omnidirectional antennas
WS-AP3620-IL
Dual Radio 802.11a/b/g/n indoor access point with three detachable dual-band omnidirectional antennas - Israel
Standalone Access Points
WS-AP2630-EU
Dual Radio 802.11a/b/g standalone indoor access point with two internal dual-band diversity omnidirectional antennas - Europe (Note: can be operated as a thin AP)
WS-AP2640-EU
Dual Radio 802.11a/b/g standalone indoor access point with external dual-band diversity antenna - Europe (Note: can be operated as a thin AP)
WS-AP3630-NAM
Dual Radio 802.11a/b/g/n standalone indoor access point with internal dual-band antenna - North America WS-AP3630-IL
Dual Radio 802.11a/b/g/n standalone indoor access point with internal dual-band antenna - Israel WS-AP3630-ROW
Dual Radio 802.11a/b/g/n standalone indoor access point with internal dual-band antenna - Rest of World WS-AP3640-NAM
Dual Radio 802.11a/b/g/n standalone indoor access point with external dual-band antenna - North America
WS-AP3640-IL
Dual Radio 802.11a/b/g/n standalone indoor access point with external dual-band antenna - Israel
WS-AP3640-ROW
Dual Radio 802.11a/b/g/n standalone indoor access point with external dual-band antenna - Rest of World Outdoor Access Point Bundles
WS-AP36OUTNAM
Integrated outdoor solution; includes AP3620, powered NEMA enclosure, and connectors - North America
Mounting Kits
WS-MB2605-01
Mounting bracket for AP2605
WS-MB261020-01
Mounting Kit for electrical box mounting for AP2610/AP2620/AP2630/AP2640
WS-MB261020-02
Adaptor plate for electrical box mounting for AP2610/AP2620/AP2630/AP2640
WS-MK265060-01
Mounting Kit for rail or pole mounting for AP2650/AP2660
WS-MB361020-01
Secure mounting Kit with Kensington lock slot and integrated cable routing for AP36xx
WS-MB361020-11
Drop ceiling mounting bracket for AP36xx
WS-MBUNIVERSAL-01
Universal mounting bracket adapter for existing installs (Cisco, Aruba, Trapeze, Roamabout) - Refer to manual for specific access point model support
Power Supply (non-PoE)
WS-PS2605-MR
AP2605 AC Power Supply - Multi-Region
WS-PS261020-NAM
AP2610/AP2620 AC Power Supply for North America
WS-PS261020-EU
AP2610/AP2620/AP2630/AP2640 AC Power Supply for Europe (Except UK)
WS-PS261020-UK
AP2610/AP2620/AP2630/AP2640 AC Power Supply for UK
WS-PS261020-CN
AP2610/AP2620/AP2630/AP2640 AC Power Supply for China
WS-PS361020-MR
AP36xx AC Power Supply - Multi-Region WS-PS261020-AU
AP2610/AP2620/AP2630/AP2640 AC Power Supply for Australia External Antennas
WS-AI-2S03360
Indoor, 2.4-2.5 GHz, 3.5dBi, omnidirectional, ceiling mount antenna with reverse polarity SMA connector (for AP2620)
WS-AI-DS06360
Indoor, 2.3-2.7/4.9-6 GHz, 5/6dBi, omnidirectional, ceiling mount antenna with reverse polarity type-N jack connector (for AP2620)
WS-AI-DT04360
Indoor, 2.4-2.5/4.9-5.9 GHz, Triple-feed, 3/4 dBi, omnidirectional, ceiling mount antenna with reverse polarity SMA connector (for AP3620/AP3640)
WS-AI-DT05120
Indoor, 2-3-2.7/4.9-6.1 GHz, Triple-feed, 5 dBi, 120 deg, sector antenna with reverse polarity SMA connector (for AP3620/AP3640)
Page 9
Ordering Information
Part Number
Description
WS-AIO-2S07060
Indoor/Outdoor, 2.4 -2.5 GHz, 7.5 dBi, 60 deg, panel antenna with reverse
polarity type-N jack connector (for AP2620)
WS-AIO-2S14090
Indoor/Outdoor, 2.4-2.485 GHz, 14 dBi, 90 deg, panel antenna with reverse
polarity type-N jack connector (for AP2620) - North America Only
WS-AIO-2S18018
Indoor/Outdoor, 2.3-2.5 GHz, 18 dBi, 18 deg, panel antenna with reverse
polarity type-N jack connector (for AP2620) - North America Only
WS-AIO-5S12060
Indoor/Outdoor, 5.15-5.35 GHz, 12 dBi, 60 deg, panel antenna with reverse
polarity type-N jack connector (for AP2620)
WS-AIO-5S15090
Indoor/Outdoor, 4.9-6 GHz, 14/15 dBi, 90/60 deg, panel antenna with reverse
polarity type-N jack connector (for AP2620)
WS-AIO-5S17017
Indoor/Outdoor, 5.47-5.85 GHz, 17 dBi, 17 deg, panel antenna with reverse
polarity type-N jack connector (for AP2620)
WS-AIO-DS05120
Indoor/Outdoor, 2.4-2.5/4.9-5.9 GHz, 5 dBi, 120 deg, sector antenna with reverse
polarity type-N jack connector (for AP2620)
WS-AO-5D16060
Outdoor, 5.15-5.875 GHz, Dual-polarization 16 dBi, 60 deg, sector antenna with
reverse polarity type-N jack connector (for AP3620/AP3640)
WS-AO-5D23009
Outdoor, 5.15-5.875 GHz, Dual-polarization, 23 dBi, 9 deg, panel antenna with
reverse polarity type-N jack connector (for AP3620/AP3640)
WS-AO-DS05360
Outdoor, 2.4-2.5/5.15-5.875 GHz, 5 dBi, omnidirectional, baton antenna with
reverse polarity type-N jack connector (for AP2620/AP3620/AP3640)
Antenna Cables
RBT4K-AG-PT20F
20 inch pigtail with reverse polarity type-N plug to connect AP to lightning
protector or directly to antenna (AP2620, AP3620, AP3640, and AP4102)
RBT4K-AG-PT20M
20 inch pigtail with reverse polarity type-N jack; used to connect AP to the LMR
cables (AP2620, AP3620, AP3640, and AP4102)
WS-CAB-RPSMATERM
Access point antenna port terminator (R-SMA plug 50 OHM 1W, required to
terminate unused ports on outdoor installations)
RBTES-AG-LPM
Dual-band lightning protector with reverse polarity type-N jack on both ends
RBTES-L200-C20F
20 foot LMR200 cable with reverse polarity type-N plugs on both ends
RBTES-L400-C06F
6 foot LMR400 cable with reverse polarity type-N plugs on both ends
RBTES-L400-C50F
50 foot LMR400 cable with reverse polarity type-N plugs on both ends
RBTES-L400-C75F
75 foot LMR400 cable with reverse polarity type-N plugs on both ends
RBTES-L600-C25F
25 foot LMR600 cable with reverse polarity type-N plugs on both ends
RBTES-L600-C50F
50 foot LMR600 cable with reverse polarity type-N plugs on both ends
Warranty
As a customer-centric company, Enterasys is
committed to providing quality products and
solutions. In the event that one of our products
fails due to a defect, we have developed a
comprehensive warranty that protects you and
provides a simple way to get your products
repaired or media replaced as soon as possible.
Enterasys indoor Wireless Access Points come
with a lifetime warranty. All Enterasys Wireless
Access Points come with a one year warranty
against manufacturing defects. For full
warranty terms and conditions please go to:
www.enterasys.com/support/warranty.aspx.
Service & Support
Enterasys Networks provides comprehensive
service offerings that range from Professional
Services to design, deploy and optimize
customer networks, customized technical
training, to service and support tailored to
individual customer needs. Please contact
your Enterasys account executive for more
information about Enterasys Service
and Support.
Contact Us
For more information, call Enterasys Networks toll free at 1-877-801-7082,
or +1-978-684-1000 and visit us on the Web at enterasys.com
Patented Innovation
© 2011 Enterasys Networks, Inc. All rights reserved. Enterasys Networks reserves the right to change
specifications without notice. Please contact your representative to confirm current specifications.
Please visit http://www.enterasys.com/company/trademarks.aspx for trademark information.
01/11
Delivering on our promises. On-time. On-budget.