SpecSheet
Cisco UCS C460 M2 High-Performance RackMount Server
Overview
The Cisco UCS C460 M2 High-Performance Rack-Mount Server (Figure 1) is a four-rack-unit (4RU) server
®
®
supporting the Intel Xeon processor E7-4800 product family, up to 1 terabyte (TB) of double-data-rate 3 (DDR3)
memory in 64 slots, and 12 small form factor (SFF), hot-pluggable SAS and SATA disk drives.
Abundant I/O capability is provided by 10 PCI Express (PCIe) slots supporting the Cisco UCS C-Series network
adapters, with an eleventh PCIe slot reserved for a hard disk drive array controller card. Additional I/O is provided
by two Gigabit Ethernet LAN-on-motherboard (LOM) ports, two 10 Gigabit Ethernet ports, and two dedicated outof-band (OOB) management ports.
Figure 1.
Cisco UCS C460 M2 High-Performance Rack-Mount Server
Contents: Overview
Detailed Views
Base Unit Features
Configuring
Memory
Option Cards
RAID
Software
Services
Memory Notes
PCIe Slot Notes
RAID Controller Notes
Physical Specs
Power Specs
Environmental Specs
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
HDD
Page 1 of 24
Detailed Views
Figure 2.
Front View of the Cisco UCS C460 M2 Server
Figure 3.
Detailed View of Front Panels on the Cisco UCS C460 M2 Server
Contents: Overview
Detailed Views
Base Unit Features
Configuring
Memory
Option Cards
RAID
Software
Services
Memory Notes
PCIe Slot Notes
RAID Controller Notes
Physical Specs
Power Specs
Environmental Specs
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
HDD
Page 2 of 24
Figure 4.
Rear View of the Cisco UCS C460 M2 Server
Figure 5.
Detailed View of the I/O Riser Module on the Rear of the Cisco UCS C460 M2 Server
Contents: Overview
Detailed Views
Base Unit Features
Configuring
Memory
Option Cards
RAID
Software
Services
Memory Notes
PCIe Slot Notes
RAID Controller Notes
Physical Specs
Power Specs
Environmental Specs
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
HDD
Page 3 of 24
Base Unit Features
Table 1.
Feature Specifications for the Cisco UCS C460 M2 Server
Feature
Specification
CPU
Up to four Intel Xeon E7-4800 Series processors
®
®
®
Chipset
Intel 7510 chipset
Memory
64 DIMM slots (up to 1 TB)
NIC
Embedded dual-port Broadcom BCM57711 PCIe-based 10 Gigabit Ethernet controller and dual-port
Broadcom BCM5709c Gigabit Ethernet
Expansion slots
10 PCIe slots (see PCIe Slot Notes for details)
Storage controller
LSI MegaRAID SAS 9260-8i, LSI Controller 9240-8i
LSI SAS2108 (Liberator) ROC (RAID-On-a-Chip) Controller, at 800 MHz
Hardware RAID (levels 0, 1, 5, 6, 10, 50 and 60)
Internal storage devices
Up to 12 SAS / SATA hot-swappable hard disk drives (HDD) or solid-state drives (SSD)
Up to two optional, internal 2-GB eUSB devices
Interfaces
Serial, USB, VGA, PCIe, RJ-45, GG-45, Small Form-Factor Pluggable Plus (SFP+)
Power subsystem
Up to four 850W power supplies
(N+N, N+1, or No redundancy)
Fans
Eight 80mm hot-swappable fans
Integrated management processor
Cisco UCS C-Series Integrated Management Controller (CIMC)
(with integrated video, KVM redirection, SIO, fan speed control, PECI, voltage monitoring)
Contents: Overview
Detailed Views
Base Unit Features
Configuring
Memory
Option Cards
RAID
Software
Services
Memory Notes
PCIe Slot Notes
RAID Controller Notes
Physical Specs
Power Specs
Environmental Specs
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
HDD
Page 4 of 24
Configuring the Cisco UCS C460 M2 Server
UCS C460 M2 base server. (required)
STEP 1:
UCSC-BASE-M2-C460
Select the CPU type.
Select two or four CPUs from this list:
●
2.4 GHz Xeon E7-4870 130W 10C CPU/30MB cache
UCS-CPU-E74870
●
2.26 GHz Xeon E7-4860 130W 10C CPU/24MB cache
UCS-CPU-E74860
●
2.0 GHz Xeon E7-4850 130W 10C CPU/30MB cache
UCS-CPU-E74850
●
2.13 GHz Xeon E7-4830 105W 8C CPU/24MB cache
UCS-CPU-E74830
●
1.86 GHz Xeon E7-4807 95W 6C CPU/18MB cache
UCS-CPU-E74807
●
2.60 GHz Xeon E7-8837 130W 8C CPU/24MB cache
UCS-CPU-E78837
●
2.13 GHz Xeon E7-8867L 105W 10C CPU/30MB cache
UCS-CPU-E78867L
Contents: Overview
Detailed Views
Base Unit Features
Option Cards
RAID
Software
Services
Memory Notes
PCIe Slot Notes
RAID Controller Notes
Physical Specs
Power Specs
Environmental Specs
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Configuring
Memory
HDD
Page 5 of 24
STEP 2:
Select the memory type.
Select a minimum of one and a maximum of 32 DIMM kits from the following list:
●
8 GB DDR3-1333-MHz RDIMM/PC3-10600/2 x 4GB Kit/ Low-Dual Volt
A02-M308GB3-2
●
16 GB DDR3-1333-MHz RDIMM/PC3-10600/2 x 8GB Kit / Low-Dual Volt
A02-M316GB3-2
●
32GB DDR3-1066MHz RDIMM/PC3-8500/2 x 16GB 4R Kit / Low-Dual Volt
A02-M332GB3-2-L
●
8GB DDR3-1333MHz RDIMM/PC3-10600/2 x 4GB 2R Kit
A02-M308GD5-2
●
16GB DDR3-1333MHz RDIMM/PC3-10600/2 x 8GB 2R Kit
A02-M316GD5-2
●
Factory Memory Mirroring Option
N01-MMIRROR
Note:
Memory mirroring is available only when banks 1 and 2 are populated with identical DIMMs.
STEP 3:
Select the RAID controller option.
If your system includes SAS or SATA drives, you must choose a RAID controller.
●
LSI Controller 9240-8i
RC460-PL002
◦ Installs in dedicated SAS riser PCIe slot on a C460 M2
◦ Supports up to 12 SAS or SATA drives
◦ Supports RAID 0, 1, 5, 10, 50
◦ No battery backup option available
●
LSI Controller 9260-8i
RC460-PL001
◦ Installs in dedicated SAS riser PCIe slot on a C460 M2
◦ Supports up to 12 SAS or SATA drives
◦ Supports RAID 0,1,5,6,10, 50 or 60
◦ Includes 512 MB of write cache
◦ Battery backup option available
Contents: Overview
Detailed Views
Base Unit Features
Configuring
Memory
Option Cards
RAID
Software
Services
Memory Notes
PCIe Slot Notes
RAID Controller Notes
Physical Specs
Power Specs
Environmental Specs
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
HDD
Page 6 of 24
●
LSI 6G MegaRAID 9280-4i4e PCIe Card
UCSC-C-4I4E
◦ Takes up one of five available PCIe slots
◦ Supports up to sixteen SAS and/or SATA drives
◦ Supports external JBOD expansion
◦ Battery Back-Up Option Available
●
Battery Backup Option
STEP 4:
RC460-LBBU
Select the 2.5-inch HDD drive type.
Select a minimum of zero and a maximum of 12 drives from this list:
●
500 GB SATA 7.2k RPM SFF HDD/hot plug/C-Series drive sled
R2XX-D500GCSATA
●
1 TB SATA 7.2k RPM SFF HDD/hot plug/C-Series drive sled
A03-D1TBSATA
●
73 GB 6Gb SAS 15k RPM SFF HDD/hot plug/drive sled mounted
A03-D073GC2
●
146 GB 6Gb SAS 15k RPM SFF HDD/hot plug/drive sled mounted
A03-D146GC2
●
300 GB 6Gb SAS 10k RPM SFF HDD/hot plug/drive sled mounted
A03-D300GA2
●
600 GB 6Gb SAS 10k RPM SFF HDD/hot plug/drive sled mounted
A03-D600GA2
Contents: Overview
Detailed Views
Base Unit Features
Configuring
Memory
Option Cards
RAID
Software
Services
Memory Notes
PCIe Slot Notes
RAID Controller Notes
Physical Specs
Power Specs
Environmental Specs
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
HDD
Page 7 of 24
STEP 5:
Select a factory-configured RAID setup.
Most customers prefer to configure their own RAID setup.
If you would prefer that Cisco to configure the RAID, choose one of the following options:
●
RAID 0 (Striping)
R2XX-RAID0
Requires a minimum of one hard drive.
●
RAID 1 (Mirroring)
R2XX-RAID1
Requires exactly two hard drives with same size, speed and capacity.
●
RAID 5
R2XX-RAID5
Requires a minimum of three HDDs, all with identical speed and capacity.
●
RAID 6
R2XX-RAID6
Requires a minimum of four HDDs, all with identical speed and capacity.
●
RAID 10
R2XX-RAID10
Requires a minimum of four HDDs, all with identical speed and capacity.
Contents: Overview
Detailed Views
Base Unit Features
Configuring
Memory
Option Cards
RAID
Software
Services
Memory Notes
PCIe Slot Notes
RAID Controller Notes
Physical Specs
Power Specs
Environmental Specs
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
HDD
Page 8 of 24
STEP 6:
Select option cards.
Select option cards from the following list. You can select a maximum of 10 PCIe cards.
●
Cisco UCS P81E Virtual Interface Card/Dual port 10Gbps
N2XX-ACPCI01
(Max. 2 Supported in slots 1 & 2)
●
Broadcom NetXtreme II 5709 Quad Port Ethernet PCIe Adapter Card with
N2XX-ABPCI03
TCP Offload Engine (TOE) and iSCSI HBA
●
Broadcom NetXtreme II 57711 Dual Port 10 GbE PCIe Adapter Card with
N2XX-ABPCI02
TCP Offload Engine (TOE) and iSCSI HBA
●
Emulex LightPulse LPe11002 4-Gbps Fibre Channel PCIe Dual Channel HBA
N2XX-AEPCI03
●
Emulex Converged Network Adapter / Dual port 10Gb
N2XX-AEPCI01
●
Emulex 8Gb HBA (Light Pulse LP-e12002)
N2XX-AEPCI05
●
Intel 10GbE Dual port Niantec Controller with Copper SFP+ Cable
N2XX-AIPCI01
●
Intel Quad port GbE HBA
N2XX-AIPCI02
●
Mellanox Connect X-2 EN with dual 10GbE SFP+ ports
N2XX-AMPCI01
●
QLogic QLE8152 Dual Port 10-Gbps PCIe Converged Network Adapter (CNA)
N2XX-AQPCI01
●
QLogic SANblade QLE2462 Dual Port 4-Gbps FC-to-PCI Express HBA
N2XX-AQPCI03
●
QLogic QLE2562 8Gb Dual Port Fibre Channel HBA
N2XX-AQPCI05
STEP 7:
Select redundant power supply units.
In two-processor configuration, two power supplies come standard with the base chassis, and you can order up to
two “redundant” power supplies. In a four-processor configuration, four power supplies come standard with the
base chassis, and no extra power supplies are needed.
●
850W Power Supply Unit for C-Series C460
Contents: Overview
RC460-PSU2-850W
Detailed Views
Base Unit Features
Configuring
Memory
Option Cards
RAID
Software
Services
Memory Notes
PCIe Slot Notes
RAID Controller Notes
Physical Specs
Power Specs
Environmental Specs
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
HDD
Page 9 of 24
STEP 8:
Select the power cords. (optional)
You can select a maximum of two power cables from this list:
●
N5000 AC Power Cable, 6A, 250V, North America, 2.5m
CAB-N5K6A-NA
●
N5000 AC Power Cable, 13A, 250V, North America, 2.5m
CAB-AC-250V/13A
●
N5000 AC Power Cable, 6A, 250V, Power Strip Type
CAB-C13-C14-JMPR
●
N5000 AC Power Cable, 10A, 250V, Argentina, 2.5m
SFS-250V-10A-AR
●
N5000 AC Power Cable, 10A, 250V, Australia, 2.5m
CAB-9K10A-AU
●
N5000 AC Power Cable, 10A, 250V, China, 2.5m
SFS-250V-10A-CN
●
N5000 AC Power Cable, 10A, 250V, Europe, 2.5m
CAB-9K10A-EU
●
N5000 AC Power Cable, 10A, 250V, India, 2.5m
SFS-250V-10A-ID
●
N5000 AC Power Cable, 10A, 250V, Israel, 2.5m
SFS-250V-10A-IS
●
N5000 AC Power Cable, 10A, 250V, Italy, 2.5m
CAB-9K10A-IT
●
N5000 AC Power Cable, 10A, 250V, Switzerland, 2.5m
CAB-9K10A-SW
●
N5000 AC Power Cable, 10A, 250V, United Kingdom, 2.5m
CAB-9K10A-UK
●
N5000 Power Cord, 125VAC 15A NEMA 5-15 Plug, North America, 2.5m
CAB-9K12A-NA
●
Power Cord Jumper, C13-C14 Connectors, 2 Meter Length
CAB-C13-C14-2M
●
Power Cord, 3 PIN, Japan
CAB-JPN-3PIN
STEP 9:
Order the cable management arm. (optional)
A rail kit is included with all Cisco UCS C460 M2 servers. The cable management arm (CMA) is used for cable
management and hooks onto the rail kit.
●
Cable Management Arm:
Contents: Overview
R460-CBLARM
Detailed Views
Base Unit Features
Configuring
Memory
Option Cards
RAID
software
Services
Memory Notes
PCIe Slot Notes
RAID Controller Notes
Physical Specs
Power Specs
Environmental Specs
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
HDD
Page 10 of 24
STEP 10:
Order the internal Flash USB device. (optional)
You can order a maximum of two Flash USB devices.
●
2-GB internal Flash USB device
STEP 11:
RC460-EUSB
Select the operating system. (optional)
Various operating system options are available. Select from this list:
SUSE Linux Enterprise Server
●
SLES/1yr subscription/svcs required/0 media
SLES-1A
●
SLES/3yr subscription/svcs required/0 media
SLES-3A
Red Hat Enterprise Linux
●
RHEL/2 Socket/1 Guest/1Yr Svcs Required
RHEL-2S-1G-1A
●
RHEL/2 Socket/1 Guest/3Yr Svcs Required
RHEL-2S-1G-3A
●
RHEL/2 Socket/4 Guest/1Yr Svcs Required
RHEL-2S-4G-1A
●
RHEL/2 Socket/4 Guest/3Yr Svcs Required
RHEL-2S-4G-3A
●
RHEL/2 Socket/U Guest/1Yr Svcs Required
RHEL-2S-UG-1A
●
RHEL/2 Socket/U Guest/3Yr Svcs Required
RHEL-2S-UG-3A
●
RHEL/4 Socket/1 Guest/1Yr Svcs Required
RHEL-4S-1G-1A
●
RHEL/4 Socket/1 Guest/3Yr Svcs Required
RHEL-4S-1G-3A
●
RHEL/4 Socket/4 Guest/1Yr Svcs Required
RHEL-4S-4G-1A
●
RHEL/4 Socket/4 Guest/3Yr Svcs Required
RHEL-4S-4G-3A
●
RHEL/4 Socket/U Guest/1Yr Svcs Required
RHEL-4S-UG-1A
●
RHEL/4 Socket/U Guest/3Yr Svcs Required
RHEL-4S-UG-3A
Contents: Overview
Detailed Views
Base Unit Features
Configuring
Memory
Option Cards
RAID
Software
Services
Memory Notes
PCIe Slot Notes
RAID Controller Notes
Physical Specs
Power Specs
Environmental Specs
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
HDD
Page 11 of 24
RHEL Add-Ons
●
High-Availability/2 Socket/1Yr Svcs Required
RHEL-HA-2S-1A
●
High-Availability/2 Socket/3Yr Svcs Required
RHEL-HA-2S-3A
●
High-Availability/4 Socket/1Yr Svcs Required
RHEL-HA-4S-1A
●
High-Availability/4 Socket/3Yr Svcs Required
RHEL-HA-4S-3A
●
Resilient Storage With Ha /2 Socket/1 Yr Svcs Required
RHEL-RS-2S-1A
●
Resilient Storage With Ha /2 Socket/3 Yr Svcs Required
RHEL-RS-2S-3A
●
Resilient Storage With Ha /4 Socket/1 Yr Svcs Required
RHEL-RS-4S-1A
●
Resilient Storage With Ha /4 Socket/3 Yr Svcs Required
RHEL-RS-4S-3A
●
Scalable File System/2 Socket/1 Yr Svcs Required
RHEL-SFS-2S-1A
●
Scalable File System/2 Socket/3 Yr Svcs Required
RHEL-SFS-2S-3A
●
Scalable File System/4 Socket/1 Yr Svcs Required
RHEL-SFS-4S-1A
●
Scalable File System/4 Socket/3 Yr Svcs Required
RHEL-SFS-4S-3A
Windows Server
●
Windows Svr 2008 ST media (1-4CPU, 5CAL)
MSWS-08-STHV
●
Windows Svr 2008 EN media (1-8CPU, 25CAL)
MSWS-08-ENHV
●
Windows Svr 2008 ST media R2 ST (1-4CPU, 5CAL)
MSWS-08R2-STHV
●
Windows Svr 2008 EN media R2 EN (1-8CPU, 25CAL)
MSWS-08R2-ENHV
●
Windows Svr 2008 R2-2 CPU-Data Center
MSWS-08R2-DCHV2S
●
Windows Svr 2008 R2-4 CPU-Data Center
MSWS-08R2-DCHV4S
VMware Server
●
VMware vSphere Advanced (1 CPU), 1yr 24x7 support
VMW-VS-ADV-1A
●
VMware vSphere Advanced (1 CPU), 3yr 24x7 support
VMW-VS-ADV-3A
●
VMware vSphere Enterprise (1 CPU), 1yr 24x7 support
VMW-VS-ENT-1A
●
VMware vSphere Enterprise (1 CPU), 3yr 24x7 support
VMW-VS-ENT-3A
●
VMware vSphere Enterprise Plus (1 CPU), 1yr 24x7 support
VMW-VS-ENTP-1A
●
VMware vSphere Enterprise Plus (1 CPU), 3yr 24x7 support
VMW-VS-ENTP-3A
Contents: Overview
Detailed Views
Base Unit Features
Configuring
Memory
Option Cards
RAID
Software
Services
Memory Notes
PCIe Slot Notes
RAID Controller Notes
Physical Specs
Power Specs
Environmental Specs
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
HDD
Page 12 of 24
Select an operating system media kit (optional)
●
RHEL 6 Media Only (Multilingual)
RHEL-6
●
SLES 11 media only (multilingual)
SLES-11
●
Windows Svr 2008 ST media
MSWS-08-STHV-RM
●
Windows Svr 2008 EN media
MSWS-08-ENHV-RM
●
Windows Svr 2008 ST media R2 ST (1-4CPU, 5CAL)
MSWS-08R2-STHV-RM
●
Windows Svr 2008 EN media R2 EN (1-8CPU, 25CAL)
MSWS-08R2-ENHV-RM
●
Windows Svr 2008 ST media R2 DC (1-8CPU, 25CAL)
MSWS-08R2-DCHV-RM
STEP 12:
Select from a variety of value-added software. (optional)
●
BMC BladeLogic CM for Virtualized Cisco Servers
BMC-001
●
BMC Blade Logic Compliance, VM Bundle, 2 Socket Server
BMC-001-COMP
●
BMC BladeLogic CM for Physical Cisco Servers
BMC-002
●
BMC Blade Logic Compliance, Single OS
BMC-002-COMP
●
BMC Bladelogic CM, Virtualized 4-Socket Server
BMC-003
●
BMC Blade Logic Compliance, VM Bundle, 4 Socket Server
BMC-003-COMP
●
BMC BPPM Per Server
BMC-012
●
VMware vCenter Server Standard, 1yr 24x7 support
VMW-VCS-1A
●
VMware vCenter Server Standard, 3yr 24x7 support
VMW-VCS-3A
●
Nexus 1000V License PAK for 1 Virtual Ethernet module
N1K-VLEM-UCS-1
●
Nexus 1000V VSM Virtual Appliance Software
N1K-CSK9-UCS-404
Contents: Overview
Detailed Views
Base Unit Features
Configuring
Memory
Option Cards
RAID
Software
Services
Memory Notes
PCIe Slot Notes
RAID Controller Notes
Physical Specs
Power Specs
Environmental Specs
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
HDD
Page 13 of 24
STEP 13:
Select the appropriate services. (optional)
A variety of service options are available, as listed here.
Cisco Unified Computing Mission Critical Support Service
This service delivers personalized technical account management, expedited technical support, and expert field
support engineering for the Cisco Unified Computing System
™
The Mission Critical Support Service provides a designated technical account manager (TAM) who acts as a
strategic resource to help assure the unified computing environment runs at peak efficiency. Should a problem
arise that threatens business continuity, the TAM provides crisis management leadership, and customer IT staff
gets expedited access to Cisco’s award-winning Technical Assistance Center (TAC).
Please note: This service has qualification criteria. There should be US$1.2 million of UCS equipment, 200 blades,
and a single location to qualify for this service level.
●
UC Mission Critical 24x7x4 On-site
CON-UCM7-C460M2
●
UC Mission Critical 24x7x2 On-site
CON-UCM8-C460M2
Cisco Unified Computing Support Service
For support of the entire Unified Computing System, Cisco offers the Cisco Unified Computing Support Service.
This service provides expert software and hardware support to help sustain performance and high availability of the
unified computing environment. This service includes access to the award-winning Cisco Technical Assistance
Center (TAC) around the clock, from anywhere in the world.
For Cisco UCS blade servers, there is Smart Call Home, which provides proactive, embedded diagnostics, and
real-time alerts. For systems that include the Cisco UCS Manager, the support service includes downloads of UCS
Manager upgrades. The Unified Computing Support Service includes flexible hardware replacement options,
including replacement in as little as two hours. There is also access to Cisco’s extensive online technical resources
to help maintain optimal efficiency and uptime of the unified computing environment.
●
UC Support 8X5XNBD Not on-site
CON-UCS1-C460M2
●
UC Support 8X5X4 Not on-site
CON-UCS2-C460M2
●
UC Support 24x7x4 Not on-site
CON-UCS3-C460M2
●
UC Support 24x7x2 Not on-site
CON-UCS4-C460M2
Contents: Overview
Detailed Views
Base Unit Features
Configuring
Memory
Option Cards
RAID
Software
Services
Memory Notes
PCIe Slot Notes
RAID Controller Notes
Physical Specs
Power Specs
Environmental Specs
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
HDD
Page 14 of 24
●
UC Support 8X5XNBD On-site
CON-UCS5-C460M2
●
UC Support 8X5X4 On-site
CON-UCS6-C460M2
●
UC Support 24x7x4 On-site
CON-UCS7-C460M2
●
UC Support 24x7x2 On-site
CON-UCS8-C460M2
Cisco Unified Computing Warranty Plus Service
For faster parts replacement than is provided with the standard Cisco Unified Computing System warranty, Cisco
offers the Cisco Unified Computing Warranty Plus Service. Customers can choose from several levels of advanced
parts replacement coverage, including onsite parts replacement in as little as two hours. Warranty Plus provides
remote access anytime to Cisco support professionals who can determine if a return materials authorization (RMA)
is required.
●
UC Warranty Plus 24x7x4
CON-UCW3-C460M2
●
UC Warranty Plus 8X5XNBD On- Site
CON-UCW5-C460M2
For more information, consult:
Unified Computing Warranty and Support Services
For a complete listing of available Services for Cisco Unified Computing System, visit:
Unified Computing Services
Contents: Overview
Detailed Views
Base Unit Features
Configuring
Memory
Option Cards
RAID
Software
Services
Memory Notes
PCIe Slot Notes
RAID Controller Notes
Physical Specs
Power Specs
Environmental Specs
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
HDD
Page 15 of 24
Product Notes
Memory Notes
●
A factory memory mirroring option is available.
RAID 1 is to storage as memory mirroring is to memory. System administrators can configure their Cisco
UCS C460 M2 server to maintain a mirrored copy of the information contained in memory.
Note: Memory mirroring is available only when banks 1 and 2 are populated with identical DIMMs.
●
There are 16 DIMM slots per CPU (eight per memory riser board). System performance is optimized when
memory type and quantity is equal for all memory channels on all CPUs. (The UCS C460 M2 server has
four memory channels per CPU)
●
DIMMs must be inserted in pairs and from the same DIMM manufacturer. This is the reason for DIMM kits
on the C460 M2. All DIMMs supported on the C460 M2 are registered (buffered) DIMMs.
●
The following memory capacities are supported:
◦ 2-processor configuration: Minimum 16 GB; maximum 512 GB
◦ 4-processor configuration: Minimum 32 GB; maximum 1024 GB
●
The Cisco UCS C460 M2 server has four processor sockets, and each socket has two memory risers.
Contents: Overview
Detailed Views
Base Unit Features
Configuring
Memory
Option Cards
RAID
Software
Services
Memory Notes
PCIe Slot Notes
RAID Controller Notes
Physical Specs
Power Specs
Environmental Specs
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
HDD
Page 16 of 24
Table 2.
CPU and Memory Riser Mapping
UCS C460 server has 4 processor sockets, each socket has 2 memory risers. The following table shows the
placement of the CPU and their corresponding memory risers.
Processor Socket CPU4
Risers
Mem8
Mem7
Mem6
CPU2
Mem5
CPU1
Mem4
Mem3
Mem2
Mem1
Total System
# of DIMM
Memory Size in pairs per
C460 M1
processor
socket (each
socket has two
risers)
DIMMs in
Bank-1 slots
on a riser
(blue-color
slots labeled
as 1B, 1D, 1A,
1C)
DIMMs in
Bank-2 slots
on a riser
(dark-color
slots labeled
as 2B, 2D, 2A,
2C)
Total memory
size per CPU
DIMM Max
Operation
Speed
Total # of
DIMMs in the
system
Relative
Performance
32GB
2x4GB
0
8GB
1066MHz
8
2x8GB
0
16GB
1066MHz
8
Poor(peak
bandwidth:
~0.25x)
2x16GB
0
32GB
1066MHz
8
4x4GB
0
16GB
1066MHz
16
4x8GB
0
32GB
1066MHz
16
64GB
1 pair (1B, 1D
in odd labeled
risers)*
128GB
64GB
128GB
2 identical
pairs (1B, 1D in
both riser)
256GB
128GB
256GB
512GB
256GB
512GB
1TB
640GB
768GB
4x16GB
0
64GB
1066MHz
16
4 identical
pairs (1B, 1D,
1A, 1C in both
risers)
8x4GB
0
32GB
1066MHz
32
8x8GB
0
64GB
1066MHz
32
8x16GB
0
128GB
1066MHz
32
8 identical
pairs (both
raisers fully
populated)
8x4GB
8x4GB
64GB
1066MHz
64
8x8GB
8x8GB
128GB
1066MHz
64
8x16GB
8x16GB
256GB
1066MHz
64
8 mixed pairs
(both raisers
fully populated)
8x16GB
8x4GB
160GB
1066MHz
64
8x16GB
8x8GB
192GB
1066MHz
64
8x8GB
8x4GB
96GB
1066MHz
64
384GB
*
CPU3
Average (peak
bandwidth:
~0.50x)
Good
Performance
(peak
bandwidth:
~0.94x)
Best
Performance
(peak
bandwidth: 1.0)
Best
Performance
(peak
bandwidth: 1.0)
Mem1 for CPU1, Mem3 for CPU2, Mem5 for CPU3, and Mem7 for CPU4
Contents: Overview
Detailed Views
Base Unit Features
Configuring
Memory
Option Cards
RAID
Software
Services
Memory Notes
PCIe Slot Notes
RAID Controller Notes
Physical Specs
Power Specs
Environmental Specs
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
HDD
Page 17 of 24
Figure 6.
Memory Riser Board on the Cisco UCS C460 M2 Server
Contents: Overview
Detailed Views
Base Unit Features
Configuring
Memory
Option Cards
RAID
Software
Services
Memory Notes
PCIe Slot Notes
RAID Controller Notes
Physical Specs
Power Specs
Environmental Specs
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
HDD
Page 18 of 24
PCIe Slot Notes
As Figure 7 shows, the Cisco UCS C460 M2 Server has 10 PCIe slots available. There are a total of 11 slots; one
is a dedicated SAS riser slot.
Figure 7.
PCIe Slots on the Cisco UCS C460 M2 Server
Table 3.
PCIe Card Specifications for the Cisco UCS C460 M2 Server
PCIe slot
PCIe cards
PCIe slot
PCIe cards
1
PCIe Gen2 x8, 3/4 length
6
PCIe Gen2 x8, 3/4 length, hot plug
2
PCIe Gen2 x8, 3/4 length, hot plug
7
PCIe Gen2 x8, 3/4 length, hot plug
3
PCIe Gen2 x8 1/2 length
8
PCIe Gen2 x8, 3/4 length
4
PCIe Gen2 x4, 1/2 length
9
PCIe Gen1 x4, 1/2 length
5
PCIe Gen2 x16, 3/4 length
10
PCIe Gen1 x4, 1/2 length
Contents: Overview
Detailed Views
Base Unit Features
Configuring
Memory
Option Cards
RAID
Software
Services
Memory Notes
PCIe Slot Notes
RAID Controller Notes
Physical Specs
Power Specs
Environmental Specs
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
HDD
Page 19 of 24
RAID Controller Notes
The SAS riser card is installed at PCIe slot 11, the SAS riser slot. The SAS riser card supports 12 SAS/SATA ports
when used in conjunction with the SAS Expander backplane.
The SAS riser board (LSI MegaRAID SAS 9260-8i) supports the following features:
●
Form factor: PCIe Low Profile (H x L) = 2.72 x 6.60 inches
●
LSI SAS2108 (Liberator) ROC (RAID-On-a-Chip) Controller, at 800 MHz
●
PCIe x8 card edge, also compatible with x16 lane slots, 5-Gbps or 2.5-Gbps serial transfer rate
●
Two internal Mini SAS 4i connectors
●
Eight channels of SAS/SATA at up to 6 Gbps
◦ SAS rates of 6.0 Gbps and 3.0 Gbps
◦ SATA rates of 3.0 Gbps and 1.5 Gbps
●
Hardware RAID (levels 0, 1, 5, 6, 10, 50 and 60)
●
Supports drive hot-plugging
●
5-Chip DDR2 on-board memory running at 800 MHz (64-bit with error-correcting code (ECC) for enhanced
hardware RAID performance
●
512 MB on-board DDR2-800 cache arranged as 64Mx16 devices (1-Gb capacity)
●
iBBU support: direct connected iBBU07 RAID Battery Back-up module for DDR2 DIMM refresh support
during a power failure
●
8-MB CFI Compliant Flash ROM and a 32-kB NVSRAM (nonvolatile SRAM) for disk and drive setup
information storage
●
System Enclosure Specification (SES) connectivity through I2C cable or SGPIO
●
UART and JTAG debug ports
Refer to LSI MegaRAID SAS 9260-8i Product Specification or visit the following site for a detailed description of
this board:
http://www.lsi.com/storage_home/products_home/internal_raid/megaraid_sas/6gb_s_value_line/sas92608i/index.html?locale=EN&remote=1
Contents: Overview
Detailed Views
Base Unit Features
Configuring
Memory
Option Cards
RAID
Software
Services
Memory Notes
PCIe Slot Notes
RAID Controller Notes
Physical Specs
Power Specs
Environmental Specs
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
HDD
Page 20 of 24
The SAS riser board (LSI MegaRAID SAS 9240-8i) supports the following features:
●
Form factor: PCIe Low Profile (H x L) = 2.536 x 6.60 inches
●
LSI SAS2008 PCI-Express-SAS/SATA I/O processor chip.
●
PCIe x8 card edge, also compatible with x16 lane slots, 5-Gbps or 2.5-Gbps serial transfer rate
●
Two internal Mini SAS 4i connectors
●
Eight channels of SAS/SATA at up to 6 Gb per second
◦ SAS rates of 6.0 Gb per second and 3.0 Gb per second
◦ SATA rates of 3.0 Gb per second and 1.5 Gb per second
●
Hardware RAID (levels 0, 1, 5, 10, 50 and JBOD mode)
●
Supports drive hot-plugging
●
System Enclosure Specification (SES) connectivity through I2C cable or SGPIO
●
UART and JTAG debug ports
Refer to LSI MegaRAID SAS 9240-8i Product Specification or visit the following site for a detailed description of
this board:
http://www.lsi.com/storage_home/products_home/internal_raid/megaraid_sas/entry_line/megaraid_sas_92408i/index.html
Contents: Overview
Detailed Views
Base Unit Features
Configuring
Memory
Option Cards
RAID
Software
Services
Memory Notes
PCIe Slot Notes
RAID Controller Notes
Physical Specs
Power Specs
Environmental Specs
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
HDD
Page 21 of 24
Technical Specifications
Physical Dimension Specifications
Table 4.
Physical Dimension Specifications for the Cisco UCS C460 M2Server
Dimension
Specification
Height
6.8 in. (173.8 mm)
Width
16.7 in. (424 mm)
Depth
27.7 in. (704 mm)
Front Clearance
3 in.(76 mm)
Side Clearance
1 in. (25 mm)
Rear Clearance
6 in. (152 mm)
Weight
110.23 lbs (50 kg) *
*Note: The system weight listed here is an estimate for a fully configured system and will vary depending on number of peripheral
devices
Power Specifications
Table 5.
Power Specifications for the Cisco UCS C460 M2 Server
Parameter
Minimum
Nominal
Maximum
Start Up VAC
Power Off VAC
Voltage (115)
90 Vrms
100-127 Vrms
140 Vrms
85VAC +/-4VAC
75VAC +/-5VAC
Voltage (220)
180 Vrms
200-240 Vrms
264 Vrms
Frequency
47 Hz
50/60 Hz
63 Hz
Note: AC input connector is an IEC 320 C-14 15A/250VAC power inlet.
For configuration-specific power specifications, use the Cisco UCS Power Calculator:
http://www.cisco.com/assets/cdc_content_elements/flash/dataCenter/cisco_ucs_power_calculator/
Contents: Overview
Detailed Views
Base Unit Features
Configuring
Memory
Option Cards
RAID
Software
Services
Memory Notes
PCIe Slot Notes
RAID Controller Notes
Physical Specs
Power Specs
Environmental Specs
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
HDD
Page 22 of 24
Table 6.
Plug and Connector Part Numbers for the Cisco UCS C460 M2 Server
Part Number
Description
Plug
Connector
CAB-9K12A-NA
125VAC 13A NEMA 5-15 PLUG
NEMA 5-15P
IEC60320/C15
CAB-AC-250V/13A
NEMA L6-20 250V/20A
IEC320/C13 PLUG
NEMA L6-20
IEC60320/C13
CAB-C13-C14-JMPR
RECESSED RECEPTICAL AC
SS10A
HS10S
CAB-N5K6A-NA
200/240V 6A
NEMA 6-15P
IEC60320/C13
R2XXDMYMPWRCORD
NO POWER CORD
N/A
N/A
Figure 8.
Plugs and Connectors for the Cisco UCS C460 M2 Server
Contents: Overview
Detailed Views
Base Unit Features
Configuring
Memory
Option Cards
RAID
Software
Services
Memory Notes
PCIe Slot Notes
RAID Controller Notes
Physical Specs
Power Specs
Environmental Specs
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
HDD
Page 23 of 24
Environmental Specifications
Table 7.
Environmental Specifications for the Cisco UCS C460 M2 Server
Environment
Specification
Temperature operating
10°C to 35°C (50°F to 95°F)
Temperature nonoperating
-40°C to 70°C (-40°F to 158°F)
Altitude
-30 to 1,500 m (-100 to 5,000 ft.)
Humidity nonoperating
95%, noncondensing at temperatures of 25°C (77°F) to 30°C (86°F)
Vibration nonoperating
2.2 Grms, 10 minutes per axis on each of the three axes
Shock operating
Half-sine 2 G, 11 ms pulse, 100 pulses in each direction, on each of the three axes
Shock nonoperating
Trapezoidal, 25 G, two drops on each of six faces ΔV: 175 inches/sec on bottom face drop, 90 inches/sec on
other 5 faces
Safety
UL60 950, CSA60 950, AS/NZS 3562, GB4943-1995, EN60 950 and 73/23/EEC, IEC 60 950, EMKO-TSE (74SEC) 207/94, GOST-R 50377-92
Emissions
Certified to FCC Class A; tested to CISPR 22 Class A, EN 55022 Class A and 89/336/EEC, VCCI Class A,
AS/NZS 3548 Class A, ICES-003 Class A, GB9254-1998, MIC Notice 1997-42 Class A, GOST-R 29216-91
Class A, BSMI CNS13438
Immunity
Verified to comply with EN55024, CISPR 24, GB9254-1998, MIC Notice 1997-41, GOST-R 50628-95
Electrostatic discharge
Tested to ESD levels up to 15 kilovolts (kV) air discharge and up to 8 kV contact discharge without physical
damage
Acoustic
● Sound power: < 7.0 BA at ambient temperature < 23° C measured using the Dome Method
● GOST MsanPiN 001-96
For More Information
Please visit http://www.cisco.com/go/ucs.
Printed in USA
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
C17-662220-00
05/11
Page 24 of 24