Data Sheet Fujitsu PRIMERGY BX Ethernet Switch/IBP 1Gbit/s 36/8+2
Data Sheet
Fujitsu PRIMERGY BX Ethernet Switch/IBP 1Gbit/s
36/8+2
Connects 2 channels of each Server Blade with any type of
external 1 and 10 Gb Ethernet networks
Fujitsu PRIMERGY Connection Blades simplify
network connectivity for PRIMERGY Blade Servers.
They ensure fast and reliable access to data
and storage networks. All Connection Blades
are integrated within the blade server chassis
and benefit from a high-speed midplane as well
as from energy-efficient power and cooling. A
wide range of different Connection Blades are
available to address current and next-generation
I/O requirements for standards-based Fibre
Channel, InfiniBand and Ethernet networks.
PRIMERGY BX400 system units support up to 4,
PRIMERGY BX900 up to 8 Connection Blades, thus
implementing flexible and scalable connections
in order to meet the requirements arising from
dynamic workloads.
Today’s technological specifications offer speeds
of up to 8 Gbit/s for Fibre Channel, 56 Gbit/s
InfiniBand, 6 Gbit/s SAS, and up to 10 Gbit/s for
Ethernet connections per Uplink port. All the facets
of Connection Blades are available, from highly
functional self-developed models to brand models
from Cisco, Brocade or Mellanox to be able to cover
todays and future I/O requirements.
Page 1 / 7
PRIMERGY BX Ethernet Switch/IBP 1Gbit/s
36/8+2
The PRIMERGY Ethernet Switch/IBP 36/8+2 is an
integrated 1 Gb Connection Blade for use in the
PRIMERGY BX400 and BX900 chassis. It can be
installed in each Connection Blade slot (4x in
BX400, 8x in BX900) and provides 36 downlink
ports each with 1 Gb to the midplane to connect
with the Server Blades. The module contains 8
uplink ports each with 1 Gb plus 2 uplink ports
each with 10 Gb; Layer 2+ functionalities are
supported.
The Intelligent Blade Panel mode combines the
advantages of a switch regarding cable and port
consolidation with the Pass-Thru advantage
of total (VLAN) transparency without protocol
compatibility problems occurring. Server Blade
LAN ports may be grouped together with one or
more external ports, into independent named port
groups. Based on the so-called Management VLAN
Grouping each Server Blade can be assigned a
separate, VLAN-based management access.
This Connection Blade is prepared for the simple
creation of large homogeneous I/O domains by
combining (stacking) up to 8 modules within one
or more PRIMERGY BX system units.
www.fujitsu.com/fts
Data Sheet Fujitsu PRIMERGY BX Ethernet Switch/IBP 1Gbit/s 36/8+2
Features & Benefits
Main Features
Independent of external Ethernet switches
„„ Combination of switch and Intelligent Blade Panel for PRIMERGY
BX400 and BX900 Blade Servers.
Flexible and easy to adapt
„„ Unites the functions of switch and IBP.
Comprehensive connection options
„„ 8 x 1Gb (RJ45) plus 2 x 10 Gb (SFP+) uplink port.
Administration made easy
„„ Up to 8-way cascading (stacking mode).
Compatible and functional
„„ When using in IBP mode: Uplink Sets, Port Grouping, Standard Port
Group, VLAN Port Group, Service LAN Group, Service VLAN.
Page 2 / 7
Benefits
„„ Variable use in up to 6 installation bays on the rear of a BX system
unit.
„„ Easy switching between the switch and IBP functionality enables
flexible use depending on the requirement.
„„ Variable link to external networks with both low and extremely high
bandwidths; bundling option for several internal 1 Gb on external
10 Gb connections.
„„ Top management flexibility due to the standardized view of a group
of several similar Connection Blades within one or more Blade
Servers; minimizes effects of faulty components, thus increasing the
availability of the I/O connections.
„„ Protocol compatibility problems can not occur in IBP mode (e.g.
there are a range of supplementary functions in comparison to the
standard switch mode.
www.fujitsu.com/fts
Data Sheet Fujitsu PRIMERGY BX Ethernet Switch/IBP 1Gbit/s 36/8+2
Technical details
PRIMERGY BX Ethernet Switch/IBP 1Gbit/s 36/8+2
Connection type
LAN Connection Blade
Layer 2+, 1 Gb Ethernet Switch or Intelligent Blade Panel (IBP)
Supported system units
PRIMERGY BX400 S1, PRIMERGY BX900 S1, PRIMERGY BX900 S2
Max. number per BX unit
4 in PRIMERGY BX400 S1, 8 in PRIMERGY BX900 S1/S2
Supported Server Blades
all PRIMERGY BX9xx Server Blades
Supported Server Blade I/O Solutions
PRIMERGY BX9xx Server Blade w. 1 Gbit/s LAN on board
PRIMERGY BX9xx Server Blade w. 10 Gbit/s LAN on board
PRIMERGY BX9xx S3 Server Blades w. 10 Gbit/s CNA on Board
PRIMERGY BX Eth Mezz Card 1 Gbit/s 4 port
PRIMERGY BX Eth Mezz Card 10 Gbit/s 2 port
Interfaces
Down-link ports
Up-link ports
Stacking Ports
Supported Interface Modules / Cables
Order code
S26361-F3986-L3
S26361-F3986-L4
S26361-F3989-E500
S26361-F3989-L305
S26361-F3989-L330
S26361-F3989-L102
S26361-F3989-L105
S26361-F3989-L110
S26361-F4571-L101
S26361-F4571-L103
S26361-F4571-L105
S26361-F4571-L107
S26361-F4571-L110
S26361-F3873-L501
S26361-F3873-L503
S26361-F3873-L505
Interface Module notes
Page 3 / 7
36 x 1 Gbit/s Eth
8 x 1 Gb Eth (RJ45)
2 x 10 Gb Eth (SFP+)
1 x 10 Gb Eth (CX4) for external stacking connection
1 x 10 Gb Eth for internal stacking connection
Application
Type / mode
Ethernet 10 Gbit/s
SFP+ / MMF (SWL)
Ethernet 10 Gbit/s
SFP+ / SMF (LWL)
Stacking
CX4 / copper
Stacking
CX4 / copper
Stacking
CX4 / copper
Ethernet 10 Gbit/s
SFP+ Twinax Cable / active
Ethernet 10 Gbit/s
SFP+ Twinax Cable / active
Ethernet 10 Gbit/s
SFP+ Twinax Cable / active
Ethernet 10 Gbit/s
SFP+ Twinax Cable / passive
Ethernet 10 Gbit/s
SFP+ Twinax Cable / passive
Ethernet 10 Gbit/s
SFP+ Twinax Cable / passive
Ethernet 10 Gbit/s
SFP+ Twinax Cable / active
Ethernet 10 Gbit/s
SFP+ Twinax Cable / active
Ethernet 10 Gbit/s
SFP+ Twinax Cable / active
Ethernet 10 Gbit/s
SFP+ Twinax Cable / active
Ethernet 10 Gbit/s
SFP+ Twinax Cable / active
Only Fujitsu certified modules and cables are supported
Order codes starting with “S26361-F3873” are Brocade branded cables
Order codes starting with “S26361-F4571” are Cisco branded cables
Connector / cable Length
LC-style / up to 300m
LC-style / up to 10Km
CX4 / up to 3m
CX4 / 0,5m
CX4 / 3m
SFP+ / 2m
SFP+ / 5m
SFP+ / 10m
SFP+ / 1m
SFP+ / 3m
SFP+ / 5m
SFP+ / 7m
SFP+ / 10m
SFP+ / 1m
SFP+ / 3m
SFP+ / 5m
www.fujitsu.com/fts
Data Sheet Fujitsu PRIMERGY BX Ethernet Switch/IBP 1Gbit/s 36/8+2
Technical specifications
Layer 2 feature
Quality of service
Link aggregation
Spanning tree
Network protocol and standards
compatibility for IBP
Network protocol and standards
compatibility
Page 4 / 7
Auto MDI/MDIX on all 10/100/1000BASE-TX ports
10/100/1000BASE-TX ports auto-sensing, auto-negotiation
Flow control:
- IEEE802.3x for full duplex mode
- Back-pressure flow control in half duplex mode
Jumbo frames up to 9KB
Link Aggregation
Port mirror
Spanning Tree (not for IBP mode)
VLAN
IGMP snooping v1/v2/v3
IGMP querier v1/v2 (not for IBP mode)
Provide storm control protection
Link State (force downlink port down, if uplink port is down)
Port backup
LLDP
IEEE 802.1p based CoS (Class of Service)
IP TOS/Precedence/DSCP based CoS
Layer 2/3/4 Access Control Lists (ACLs)
Differentiated Service (DiffServ)
Support of:
- up to 6 groups for uplink ports and 18 groups for downlink ports
- up to 8 ports per group
Supported Link Aggregation features:
- IEEE 802.3ad Link Aggregation (LACP)
- Cisco EtherChannel
- Load balancing with configurable rule (MAC-based and IP-based)
only for Switch mode
IEEE 802.1D (STP)
IEEE 802.1W (RSTP)
IEEE 802.1S (MSTP)
32 MSTP instances
IEEE 802.3i 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3z 1000BASE-SX
IEEE 802.3ab 1000BASE-T
IEEE 802.3ae 10GBASE-SR, 10GBASE-LR, 10GBASE-ER, 10GBASE-SW, 10GBASE-LW, 10GBASE-EW
IEEE 802.3aq 10GBASE-LRM
IEEE 802.3ad LACP
IEEE 802.3x Flow Control
IEEE 802.1ab LLDP
IEEE 802.1p Class of Service
IEEE 802.3i 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3z 1000BASE-SX
IEEE 802.3ab 1000BASE-T
IEEE 802.3ae 10GBASE-SR, 10GBASE-LR, 10GBASE-ER, 10GBASE-SW, 10GBASE-LW, 10GBASE-EW
IEEE 802.3aq 10GBASE-LRM
IEEE 802.3ak 10GBASE-CX4
IEEE 802.3x Flow Control
IEEE 802.3ad LACP
IEEE 802.1v Protocol VLAN, Port VLAN
IEEE 802.1d Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1q VLAN
IEEE 802.1ab LLDP
IEEE 802.1p Class of Service
www.fujitsu.com/fts
Data Sheet Fujitsu PRIMERGY BX Ethernet Switch/IBP 1Gbit/s 36/8+2
Technical specifications
Performance
Port group feature
VLAN
Management
Security
User interface
Page 5 / 7
Bandwidth: 152-Gbps
Forwarding modes: Store-and-forward
Switch latency: average 8 us for 64-byte frames
System memory: 512MB
Flash size: 64MB
Support up to 16K MAC address entries
only for IBP mode
30 uplink-sets
30 port-groups
30 VLAN-groups
10 service-LAN
128 service-VLAN
VLAN features in Switch Mode:
IEEE 802.1Q VLAN
Up to 1000 VLANs, out of 4K VLAN IDs
Port-based VLAN
Protocol-based VLAN
MAC & IP-Subnet based VLANs
GVRP, GARP, GMRP
VTP v1/v2
VLAN features in IBP Mode:
IEEE 802.1Q VLAN
1 console interface for MMB internal management
Software upload/download via FTP or TFTP
Configuration upload/download via FTP or TFTP
Dual firmware images
Up to 11 configuration files including factory default
SSH/SSL/TLS keys download via FTP or TFTP
Message/event/error/trap logs
BOOTP and DHCP v4/v6 for IP address assignment
IPv6 for management IP address
DHCP/DHCPv6 Client support
Ping function
Traceroute function for IPv4 and IPv6
SNTP (Simple Network Time Protocol) version 4
CDP (Cisco Discovery Protocol) version 2 (nor for IBP mode)
LLDP (Link Layer Discovery Protocol)
SSH v1/v2 switch management
SSL v3/TLS v1 switch management
CLI (Command Line Interface) switch management
Support Web switch management
SNMP v1, v2c, and v3 switch management
Private Enterprise MIB
RMON groups 1, 2, 3, and 9
sFlow (RFC 3176)
User name and password
IP address filter
Remote Authentication Dial In User Service (RADIUS) client
Terminal Access Controller Access Control System (TACACS+) client
Secure Sockets Layer (SSL) version 3 and Transport Layer Security (TLS) version 1
Secure Shell (SSH) version 1 and version 2
IEEE 802.1x port access control
Port Security
Command Line Interface (CLI)
Web-based management
SNMP v1/v2c/v3.
www.fujitsu.com/fts
Data Sheet Fujitsu PRIMERGY BX Ethernet Switch/IBP 1Gbit/s 36/8+2
Dimensions / Weight
Dimensions (W x D x H)
Weight
192.6 x 267.9 x 27.9 mm
1.36 kg
Environmental compliance
Temperature note
Operating environment
Operating environment Link
see corresponding PRIMERGY BX System Unit
FTS 04230 – Guideline for Data Center (installation locations)
http://docs.ts.fujitsu.com/dl.aspx?id=e4813edf-4a27-461a-8184-983092c12dbe
Electrical values
Active power (max. configuration)
Heat emission
35 W
126.0 kJ/h (119.4 BTU/h)
Compliance
Germany
Europe
USA/Canada
Global
Japan
Australia/New Zealand
Taiwan
Compliance notes
Compliance link
Page 6 / 7
GS
CE Class A *
ULc/us
FCC Class A
CB
RoHS
WEEE
VCCI Class A + JIS 61000-3-2
C-Tick
BSMI
In combination with corresponding PRIMERGY BX system unit
There is general compliance with the safety requirements of all European countries and North America. National
approvals required in order to satisfy statutory regulations or for other reasons can be applied for on request.
* Warning:
This is a class A product. In a domestic environment this product may cause radio interference in which case the user
may be required to take adequate measures.
http://sp.ts.fujitsu.com/sites/certificates/
www.fujitsu.com/fts
Data Sheet Fujitsu PRIMERGY BX Ethernet Switch/IBP 1Gbit/s 36/8+2
More information
Fujitsu OPTIMIZATION Services
More information
Copyrights
In addition to Fujitsu PRIMERGY BX Ethernet
Switch/IBP 1Gbit/s 36/8+2, Fujitsu provides
a range of platform solutions. They combine
reliable Fujitsu products with the best
in services, know-how and worldwide
partnerships.
Learn more about Fujitsu PRIMERGY BX
Ethernet Switch/IBP 1Gbit/s 36/8+2, please
contact your Fujitsu sales representative or
Fujitsu Business partner, or visit our website.
www.fujitsu.com/fts
All rights reserved, including intellectual
property rights. Changes to technical data
reserved. Delivery subject to availability. Any
liability that the data and illustrations are
complete, actual or correct is excluded.
Designations may be trademarks and/or
copyrights of the respective manufacturer,
the use of which by third parties for their
own purposes may infringe the rights of such
owner.
For further information see http://www.fujitsu.
com/fts/resources/navigation/terms-of-use.
html
Copyright © Fujitsu Technology Solutions
Fujitsu Portfolio
Build on industry standards, Fujitsu offers a full
portfolio of IT hardware and software products,
services, solutions and cloud offering, ranging
from clients to datacenter solutions and
includes the broad stack of Business Solutions,
as well as the full stack of Cloud offering. This
allows customers to leverage from alternative
sourcing and delivery models to increase
their business agility and to improve their IT
operation’s reliability.
Computing Products
www.fujitsu.com/global/services/computing/
Software
www.fujitsu.com/software/
Contact
FUJITSU LIMITED
Website: www.fujitsu.com
2012-12-03 CE-EN
Page 7 / 7
Fujitsu green policy innovation
Fujitsu Green Policy Innovation is our
worldwide project for reducing burdens on the
environment.
Using our global know-how, we aim to
contribute to the creation of a sustainable
environment for future generations through IT.
Please find further information at http://www.
fujitsu.com/global/about/environment/
Disclaimer
Technical data are subject to modification and
delivery subject to availability. Any liability
that the data and illustrations are complete,
actual or correct is excluded. Designations
may be trademarks and/or copyrights of the
respective manufacturer, the use of which
by third parties for their own purposes may
infringe the rights of such owner.
All rights reserved, including intellectual property rights. Changes to technical data reserved. Delivery subject to availability.
Any liability that the data and illustrations are complete, actual or correct is excluded.
Designations may be trademarks and/or copyrights of the respective manufacturer, the use of which by third parties for their
own purposes may infringe the rights of such owner.
For further information see http://www.fujitsu.com/fts/resources/navigation/terms-of-use.html
Copyright © Fujitsu Technology Solutions
www.fujitsu.com/fts