Data Sheet
Cisco MCS 7845-I3
®
Cisco Unified Communications Solutions unify voice, video, data, and mobile applications on fixed and
mobile networks, enabling easy collaboration every time from any workspace.
The Cisco MCS 7845-I3 Media Convergence Server is a high-availability server platform for Cisco Unified
Communications Solutions. An integral part of a complete, scalable architecture for a new generation of high-quality
IP voice solutions that run on enterprise data networks, the Cisco MCS 7845-I3 delivers the high performance and
availability demanded by today’s enterprise networks—and it is easy to deploy and highly cost-effective. At only 2
rack units (2RUs) high, the Cisco MCS 7845-I3 offers tremendous power in a low-profile chassis that minimizes rack
space.
Supported Applications
The Cisco MCS 7845-I3 can run any of the following Cisco applications:
●
Cisco Unified Application Environment
●
Cisco Unified Communications Manager (formerly known as Cisco Unified CallManager): Up to 7,500 Cisco
Unified IP Phones per server
●
Cisco Emergency Responder: Up to 30,000 Cisco Unified IP Phones per server
●
Cisco Unified Presence
●
Cisco Unified Intelligent Contact Management Enterprise and Hosted
●
Cisco Unified Contact Center Enterprise and Hosted
●
Cisco Unified Contact Center Express
●
Cisco Unified IP Interactive Voice Response (IP IVR)
●
Cisco Unified Customer Voice Portal (CVP)
●
Cisco Unified Intelligence Suite
●
Cisco Unified E-mail Interaction Manager and Unified Web Interaction Manager
●
Cisco Unified Contact Center Management Portal
●
Cisco Unified MeetingPlace conferencing
●
Cisco Unified MeetingPlace Express
●
Cisco Unity meeting solutions
●
Cisco Unity Connection
●
Cisco Unified Videoconferencing
®
®
© 2010-2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 1 of 16
Data Sheet
Key Features and Benefits
Performance
The Cisco MCS 7845-I3 is a robust, highly available server platform designed to support today’s unified
communications applications. It includes such innovations as variable-speed fan support, Light Path Diagnostics,
and memory with Chipkill ECC (Error Checking and Correction) protection. The Cisco MCS 7845-I3 occupies only
2RU rack space while providing the features most requested in a high-availability server platform.
High Availability
High availability on the Cisco MCS 7845-I3 is achieved through the following mechanisms:
●
Redundant hot-swap 675W power supplies increase system uptime by eliminating another point of failure
with a second hot-swap power supply.
●
Hot-swap Serial Attached SCSI (SAS) hard drives are configured using Redundant Array of Independent
Disks (RAID) 1.
●
Redundant hot-swap fans allow the server to continue to operate even with a fan failure and allow for fan
replacement without taking the server offline.
●
An integrated management module (IMM) increases server availability by continuously monitoring the system
and providing secure alerts and status, thereby ensuring maximum uptime.
Memory
The Cisco MCS 7845-I3 supports a maximum of 128 GB of double-data-rate 3 (DDR3) memory, which implies up to
16 GB per core or 64 GB per CPU socket. By matching the high-performance speed of the Intel Xeon 5500 Series
processor with new-generation, high-performance DDR-3 registered dual-inline-memory-module (RDIMM) memory,
performance is improved by transmitting 8 bits of data in one clock cycle while lowering the power required for the
memory by 17 percent over the previous generation of memory thermal design.
Variable-Speed Fan Support
The Cisco MCS 7845-I3 includes variable-speed fans to reduce operating noise. Through the use of temperature
sensors within the server, the speed of the fans is adjusted to maintain the proper cooling, reducing the noise
generated by the fans by operating them only when required and at a speed based upon the cooling requirements.
Serviceability
Light Path Diagnostics
The Cisco MCS 7845-I3 is equipped with Light Path Diagnostics, which provides a central information LED panel
(visible without removing the cover) and individual LED lights throughout the system on items such as DIMM
modules, peripheral-component-interconnect (PCI) slots, power supplies, and CPUs. IT can quickly view system
status, and service personnel can pinpoint a specific failing component, helping reduce downtime and service costs.
This capability provides increased availability, because nontechnical personnel can report error conditions without
removing the top cover and exposing vital components to further risk. If the system-error LED on the front of the
server is on, one or more LEDs inside the server or on the power supply will be on. These LEDs help identify and
locate problems with some server components. By following the path of lights, you can quickly identify the type of
system error that occurred. The Cisco MCS 7845-I3 is designed so that any LEDs that are illuminated remain
illuminated when the server shuts down as long as the AC power source is good and the power supply can provide
+5 VDC to the server.
© 2010-2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 2 of 17
Data Sheet
Light Path Diagnostics provide indication of failures for the following conditions:
●
One or both power supplies consuming power higher than maximum rating
●
Power supply failure
●
Failure of one or both processors
●
Hardware configuration error
●
Memory error
●
Nonmaskable interrupt
●
Error on the system board
●
Service processor failure (IMM)
●
Error on adapter on PCI slots
●
Hard disk error
●
Fan failure or slow operation
●
System temperature exceeded maximum rating
Remote Management
The included Virtual Media key coupled with the advanced IMM provides for 24-hour remote management capability.
Tape Drive Support
The Cisco MCS 7845-I3 can support an optional 36-/72-GB USB external Digital Audio Tape (DAT) drive (part
number DAT-USB-EXT-72=) or an optional USB rack-mount DAT drive (part number DAT-USB-RM-72=). This tape
drive connects through one of the USB 2.0 ports provided by the Cisco MCS 7845-I3.
Product Specifications
Tables 1 through 5 list the Cisco MCS 7845-I3 bare metal and appliance configurations, and Table 6 gives
information about previously released configurations.
Table 1.
Currently Shipping Configuration with Single Processor and 146-GB Hard Drives
Current Component
Current Value
Product part number
MCS-7845-I3-CCE1
MCS-7845-I3-CCX1
MCS-7845-I3-IPC1
MCS-7845-I3-RC1
Preload
None
OS included
None
Processor
Single Intel 5540 Quad-core 2.53-GHz; last level cache: 8 MB or
Single Intel Xeon E5630 Quad-core 2.53-GHz
Memory included
6-GB (three 2-GB DIMM) PC3-10600 1333-MHz, fully buffered double-data-rate 3 (DDR-3) RDIMM
Memory maximum
128 GB (64 GB per processor slot)
Memory bus clock
Up to 1333 MHz
Memory technology
Registered PC3-10600 DDR-3 1333-MHz dual-rank DIMM
Multibit error mitigation
Advanced Chipkill Error Checking and Correcting (ECC)
Total DIMM slots
16 (8 per processor slot)
Basic input/output system
(BIOS) type
United Extensible Firmware Interface (UEFI)
Hard disks
Four 146-GB SAS 2.5-in. hot-swap
Hot-swappable bays
8
© 2010-2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 3 of 17
Data Sheet
Hard disk interface type
SAS
Hard disk spindle speed
10,000 revolutions per minute (rpm)
Hard disk seek time
4 ms (average)
Hard disk latency
3 ms (average)
Data transfer rate
Capable of 6 Gbps
Hard disk form size
2.5-inch SFF
RAID controller model
IBM mezzanine ServeRAID MR10i controller
RAID interface
Connected to motherboard
RAID cache
256 MB
Battery-backed write cache
(BBWC)
Yes
RAID level
Configured as two RAID 1 arrays
Ethernet network interface
card (NIC)
Dual onboard 10/100/1000
Ethernet connectors
Two RJ-45 connectors on back of server
10BASE-T cable support
EIA Category 3, 4, or 5 unshielded twisted pair (UTP) (2 or 4 pair) up to 328 ft (100m)
100BASE-TX cable support
EIA Category 5 UTP (2 pair) up to 328 ft (100m)
1000BASE-T cable support
EIA Category 6 UTP (recommended), 5E UTP, 5 UTP (2 pair) up to 328 ft (100m)
Serial ports
1
Parallel ports
0
USB 2.0 ports
6 (2 front, 2 rear, and 2 internal)
Keyboard ports
Use one of the USB ports (PS/2 ports are not provided)
Mouse ports
Use one of the USB ports (PS/2 ports are not provided)
Audio ports
None
Video Graphics Array (VGA)
ports
1 front and 1 rear
System management ports
RJ-45 for integrated management module (IMM)
8x PCIe non-hot plug slots
4
Dimensions (H x W x D)
Height: 3.346 in.
Height: 85.2 mm
Width:
● With top cover: 17.465 in.
Width:
● With top cover: 443.6 mm
● With front bezel: 18.976 in.
Depth:
● EIA flange to rear: 27.480 in.
● Overall: 28.791 in.
Weight (maximum)
64 lb
© 2010-2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
● With front bezel: 482.0 mm
Depth:
● EIA flange to rear: 698 mm
● Overall: 729 mm
29.03 kg
Page 4 of 17
Data Sheet
Input requirements*
Rated line voltage: 100–127 VAC; 50 or 60 Hz
Input current (amps)
1.31 (idle)
2.25 (maximum measured)
7.8 (system rated)
60 (peak inrush current; 4 ms)
Leakage current (mA)
0.94 (idle; maximum measured; system rated)
Power (watts)
154 (idle)
257 (maximum measured)
780 (system rated)
VA rating (VA)
157 (idle)
263 (maximum measured)
797 (system rated)
BTU rating (BTU/hr)
525 (idle)
875 (maximum measured)
2661 (system rated)
Rated line voltage: 200–240 VAC; 50 or 60 Hz
Input current (amps)
0.74 (idle)
1.23 (maximum measured)
3.9 (system rated)
60 (peak inrush current; 4 ms)
Leakage current (mA)
0.94 (idle; maximum measured; system rated)
Power (watts)
151 (idle)
251 (maximum measured)
780 (system rated)
VA rating (VA)
154 (idle)
257 (maximum measured)
797 (system rated)
BTU rating (BTU/hr)
515 (idle)
855 (maximum measured)
2661 (system rated)
Power supply output power
Rated steady-state power
675W
Temperature range
Operating
50 to 95°F (10 to 35°C)
at 0–3000 ft (0–914.4m)
with an altitude de-rating of
1.4°F (0.75°C) per 1000 ft (304.8m)
Nonoperating
50 to 109.4°F (10 to 43°C)
Shipment
–40 to 140°F (–40 to +60°C)
Relative humidity (RH;
noncondensing)
Operating
8 to 80%
Shipment
5 to 100%
Maximum altitude
7000 ft
2133m
Acoustic noise
Operating minimum
L WAd (bels) 6.5
Airflow (cubic feet per
minute)
30 CFM minimum
75 CFM maximum
Remote management
IBM IMM with Virtual Media enabled
* Maximum measured values were determined with 25ºC ambient temperature, and your results may vary.
* Idle power: Power drawn with the machine(s) logged into the OS, and no other applications running. Memory, HDDs, optical
drives, and tape drives are not being used.
* Measured maximum power: Maximum measured power is the power drawn by the machine with the CPUs 100-percent used and
memory is used 10 percent more than base usage. The exerciser used is Prime95 (torture test) and can be downloaded from
www.mersenne.org.
* Rated system maximum: The maximum power able to be drawn by the machine according to the system label rating.
© 2010-2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 5 of 17
Data Sheet
Table 2.
Currently Shipping Configuration with Dual Processor and 300-GB Drives
Current Component
Current Value
Product part number
MCS-7845-I3-ECS1
MCS-7845-I3-CCE2
MCS-7845-I3-CCX2
MCS-7845-I3-MOB1
Preload
None
OS included
None
Processor
Dual Intel E5540 2.53-GHz; last level cache: 8 MB
Memory included
8-GB (four 2-GB DIMM) PC3-10600 1333-MHz, fully buffered DDR-3 RDIMM
Memory maximum
128 GB (64 GB per processor slot)
Memory bus clock
Up to 1333 MHz
Memory technology
Registered PC3-10600 DDR-3 1333-MHz dual-rank DIMM
Multibit error mitigation
Advanced Chipkill ECC
Total DIMM slots
16 (8 per processor slot)
BIOS type
UEFI
Hard disks
Four 300-GB SAS 2.5-in. hot-swap
Hot-swappable bays
8; optionally expandable to 12 bays using IBM extra kit
Hard disk interface type
SAS
Hard disk spindle speed
10,000 rpm
Hard disk seek time
4 ms (average)
Hard disk latency
3 ms (average)
Data transfer rate
Capable of 6 Gbps
Hard disk form size
2.5-inch SFF
RAID controller model
IBM mezzanine ServeRAID MR10i controller
RAID interface
Connected to motherboard
RAID cache
256 MB
BBWC
Yes
RAID level
Configured as two RAID 1 arrays
Ethernet NIC
Dual onboard 10/100/1000
Ethernet connectors
Two RJ-45 connectors on back of server
10BASE-T cable support
EIA Category 3, 4, or 5 UTP (2 or 4 pair) up to 328 ft (100m)
100BASE-TX cable support
EIA Category 5 UTP (2 pair) up to 328 ft (100m)
1000BASE-T cable support
EIA Category 6 UTP (recommended), 5E UTP, 5 UTP (2 pair) up to 328 ft (100m)
Serial ports
1
Parallel ports
0
USB 2.0 ports
6 (2 front, 2 rear, and 2 internal)
Keyboard ports
Use one of the USB ports (PS/2 ports are not provided)
Mouse ports
Use one of the USB ports (PS/2 ports are not provided)
Audio ports
None
VGA ports
1 front and 1 rear
System management ports
RJ-45 for IMM
8x PCIe non-hot plug slots
4
© 2010-2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 6 of 17
Data Sheet
Dimensions (H x W x D)
Height: 3.346 in.
Height: 85.2 mm
Width:
● With top cover: 17.465 in.
Width:
● With top cover: 443.6 mm
● With front bezel: 18.976 in.
Depth:
● EIA flange to rear: 27.480 in.
● Overall: 28.791 in.
Weight (maximum)
64 lb
Input requirements*
Rated line voltage: 100–127 VAC; 50 or 60 Hz
Input current (amps)
● With front bezel: 482.0 mm
Depth:
● EIA flange to rear: 698 mm
● Overall: 729 mm
29.03 kg
1.81 (idle)
3.07 (maximum measured)
7.8 (system rated)
60 (peak inrush current; 4 ms)
Leakage current (mA)
0.94 (idle; maximum measured; system rated)
Power (watts)
213 (idle)
353 (maximum measured)
780 (system rated)
VA rating (VA)
218 (idle)
362 (maximum measured)
797 (system rated)
BTU rating (BTU/hr)
727 (idle)
1206 (maximum measured)
2661 (system rated)
Rated line voltage: 200–240 VAC; 50 or 60 Hz
Input current (amps)
1.1 (idle)
1.84 (maximum measured)
3.9 (system rated)
60 (peak Inrush current; 4 ms)
Leakage current (mA)
0.94 (idle; maximum measured; system rated)
Power (watts)
224 (idle)
372 (maximum measured)
780 (system rated)
VA rating (VA)
229 (idle)
381 (maximum measured)
797 (system rated)
BTU rating (BTU/hr)
764 (idle)
1268 (maximum measured)
2661 (system rated)
Power supply output power
Rated steady-state power
675W
Temperature range
Operating
50 to 95°F (10 to 35°C)
at 0–3000 ft (0–914.4m)
with an altitude de-rating of
1.4°F (0.75°C) per 1000 ft (304.8m)
Nonoperating
50 to 109.4°F (10 to 43°C)
Shipment
–40 to 140°F (–40 to +60°C)
Relative humidity (RH;
noncondensing)
Operating
8 to 80%
Shipment
5 to 100%
Maximum altitude
7000 ft
2133m
Acoustic noise
Operating minimum
L WAd (bels) 6.5
Airflow (cubic feet per
minute)
30 CFM minimum
75 CFM maximum
Remote management
IMM with Virtual Media enabled
© 2010-2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 7 of 17
Data Sheet
* Maximum measured values were determined with 25ºC ambient temperature, and your results may vary.
* Idle power: Power drawn with the machine(s) logged into the OS, and no other applications running. Memory, HDDs, optical
drives, and tape drives are not being used.
* Measured maximum power: Maximum measured power is the power drawn by the machine with the CPUs 100-percent used, and
memory is used 10 percent more than base usage. The exerciser used is Prime95 (torture test) and can be downloaded from
www.mersenne.org.
* Rated system maximum: The maximum power able to be drawn by the machine according to the system label rating.
Table 3.
Product Information for Cisco Unified Communications Manager Appliances
Current Component
Current Value
Product part number
MCS7845I3-K9-CMD1
MCS7845I3-K9-CMC2
MCS7845I3-K9-CMB2
Preload
CMD1: Cisco Unified Communication Manager 8.0
CMC2: Cisco Unified Communication Manager 7.1
CMB2: Cisco Unified Communication Manager 6.1
OS included
Yes
Processor
Single Intel 5540 Quad-core 2.53-GHz; last level cache: 8 MB
Memory included
6-GB (three 2-GB DIMM) PC3-10600 1333-MHz, fully buffered DDR-3 RDIMM
Memory maximum
128 GB (64 GB per processor slot)
Memory bus clock
Up to 1333 MHz
Memory technology
Registered PC3-10600 DDR-3 1333-MHz dual-rank DIMM
Multibit error mitigation
Advanced Chipkill ECC
Total DIMM slots
16 (8 per processor slot)
BIOS type
UEFI
Hard disks
Four 146-GB SAS 2.5-in. hot-swap
Hot-swappable bays
8
Hard disk interface type
SAS
Hard disk spindle speed
10,000 rpm
Hard disk seek time
4 ms (average)
Hard disk latency
3 ms (average)
Data transfer rate
Capable of 6 Gbps
Hard disk form size
2.5-inch SFF
RAID controller model
IBM mezzanine ServeRAID MR10i controller
RAID interface
Connected to motherboard
RAID cache
256 MB
BBWC
Yes
RAID level
Configured as two RAID 1 arrays
Ethernet NIC
Dual onboard 10/100/1000
Ethernet connectors
Two RJ-45 connectors on back of server
10BASE-T cable support
EIA Category 3, 4, or 5 UTP (2 or 4 pair) up to 328 ft (100m)
100BASE-TX cable support
EIA Category 5 UTP (2 pair) up to 328 ft (100m)
1000BASE-T cable support
EIA Category 6 UTP (recommended), 5E UTP, 5 UTP (2 pair) up to 328 ft (100m)
Serial ports
1
Parallel ports
0
USB 2.0 ports
6 (2 front, 2 rear, and 2 internal)
Keyboard ports
Use one of the USB ports (PS/2 ports are not provided)
Mouse ports
Use one of the USB ports (PS/2 ports are not provided)
Audio ports
None
© 2010-2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 8 of 17
Data Sheet
VGA ports
1 front and 1 rear
System management ports
RJ-45 for IMM
8x PCIe non-hot plug slots
4
Dimensions (H x W x D)
Height: 3.346 in.
Height: 85.2 mm
Width:
● With top cover: 17.465 in.
Width:
● With top cover: 443.6 mm
● With front bezel: 18.976 in.
Depth:
● EIA flange to rear: 27.480 in.
● Overall: 28.791 in.
Weight (maximum)
64 lb
Input requirements*
Rated line voltage: 100–127 VAC; 50 or 60 Hz
Input current (Amps)
● With front bezel: 482.0 mm
Depth:
EIA flange to rear: 698 mm
Overall: 729 mm
29.03 kg
1.31 (idle)
2.25 (maximum measured)
7.8 (system rated)
60 (peak inrush current; 4ms)
Leakage current (mA)
0.94 (idle; maximum measured; system rated)
Power (watts)
154 (idle)
257 (maximum measured)
780 (system rated)
VA rating (VA)
157 (idle)
263 (maximum measured)
797 (system rated)
BTU rating (BTU/hr)
525 (idle)
875 (maximum measured)
2661 (system rated)
Rated line voltage: 200–240 VAC; 50 or 60 Hz
Input current (amps)
0.74 (idle)
1.23 (maximum measured)
3.9 (system rated)
60 (peak inrush current; 4ms)
Leakage current (mA)
0.94 (idle; maximum measured; system rated)
Power (watts)
151 (idle)
251 (maximum measured)
780 (system rated)
VA rating (VA)
154 (idle)
257 (maximum measured)
797 (system rated)
BTU rating (BTU/hr)
515 (idle)
855 (maximum measured)
2661 (system rated)
Power supply output power
Rated steady-state power
675W
Temperature range
Operating
50 to 95°F (10 to 35°C)
at 0–3000 ft (0-914.4m)
with an altitude de-rating of
1.4°F (0.75°C) per 1000 ft (304.8m)
Nonoperating
50 to 109.4°F (10 to 43°C)
Shipment
–40 to 140°F (–40 to +60°C)
Relative humidity (RH;
noncondensing)
Operating
8 to 80%
Shipment
5 to 100%
Maximum altitude
7000 ft
2133m
© 2010-2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 9 of 17
Data Sheet
Acoustic noise
Operating minimum
L WAd (bels) 6.5
Airflow (cubic feet per
minute)
30 CFM minimum
75 CFM maximum
Remote management
IBM IMM with Virtual Media enabled
Table 4.
Product Information for Cisco Unity Connection Appliances
Current Component
Current Value
Product part number
MCS7845I3-K9-UCC1
MCS7845I3-K9-UCB2
Preload
UCA1A: Cisco Unity Connection 8.0
UCB2: Cisco Unity Connection 7.1
OS included
Yes
Processor
Dual Intel E5540 2.53-GHz; last level cache: 8MB
Memory included
8-GB (four 2-GB DIMM) PC3-10600 1333 MHz, fully buffered DDR-3 RDIMM
Memory maximum
128 GB (64 GB per processor slot)
Memory bus clock
Up to 1333 MHz
Memory technology
Registered PC3-10600 DDR-3 1333-MHz dual-rank DIMM
Multibit error mitigation
Advanced Chipkill ECC
Total DIMM slots
16 (8 per processor slot)
BIOS type
UEFI
Hard disks
Four 300-GB SAS 2.5-in. hot-swap
Hot-swappable bays
8; optionally expandable to 12 bays using IBM extra kit
Hard disk interface type
SAS
Hard disk spindle speed
10,000 rpm
Hard disk seek time
4 ms (average)
Hard disk latency
3 ms (average)
Data transfer rate
Capable of 6 Gbps
Hard disk form size
2.5-inch SFF
RAID controller model
IBM mezzanine ServeRAID MR10i controller
RAID interface
Connected to motherboard
RAID cache
256 MB
BBWC
Yes
RAID level
Configured as two RAID 1 arrays
Ethernet NIC
Dual onboard 10/100/1000
Ethernet connectors
Two RJ-45 connectors on back of server
10BASE-T cable support
EIA Category 3, 4, or 5 UTP (2 or 4 pair) up to 328 ft (100m)
100BASE-TX cable support
EIA Category 5 UTP (2 pair) up to 328 ft (100m)
1000BASE-T cable support
EIA Category 6 UTP (recommended), 5E UTP, 5 UTP (2 pair) up to 328 ft (100m)
Serial ports
1
Parallel ports
0
USB 2.0 ports
6 (2 front, 2 rear, and 2 internal)
Keyboard ports
Use one of the USB ports (PS/2 ports are not provided)
Mouse ports
Use one of the USB ports (PS/2 ports are not provided)
Audio ports
None
VGA ports
1 front and 1 rear
System management ports
RJ-45 for IMM
© 2010-2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 10 of 17
Data Sheet
8x PCIe non-hot plug slots
4
Dimensions (H x W x D)
Height: 3.346 in.
Height: 85.2 mm
Width:
● With top cover: 17.465 in.
Width:
● With top cover: 443.6 mm
● With front bezel: 18.976 in.
Depth:
● EIA flange to rear: 27.480 in.
● Overall: 28.791 in.
Weight (maximum)
64 lb
Input requirements*
Rated line voltage: 100–127 VAC; 50 or 60 Hz
Input current (Amps)
● With front bezel: 482.0 mm
Depth:
● EIA flange to rear: 698 mm
● Overall: 729 mm
29.03 kg
1.81 (idle)
3.07 (maximum measured)
7.8 (system rated)
60 (peak inrush current; 4ms)
Leakage current (mA)
0.94 (idle; maximum measured; system rated)
Power (watts)
213 (idle)
353 (maximum measured)
780 (system rated)
VA rating (VA)
218 (idle)
362 (maximum measured)
797 (system rated)
BTU rating (BTU/Hr)
727 (idle)
1206 (maximum measured)
2661 (system rated)
Rated line voltage: 200–240 VAC; 50 or 60 Hz
Input current (amps)
1.1 (idle)
1.84 (maximum measured)
3.9 (system rated)
60 (peak inrush current; 4ms)
Leakage current (mA)
0.94 (idle; maximum measured; system rated)
Power (watts)
224 (idle)
372 (maximum measured)
780 (system rated)
VA rating (VA)
229 (idle)
381 (maximum measured)
797 (system rated)
BTU rating (BTU/Hr)
764 (idle)
1268 (maximum measured)
2661 (system rated)
Power supply output power
Rated steady-state power
675W
Temperature range
Operating
50 to 95°F (10 to 35°C)
at 0–3000 ft (0–914.4 m)
with an altitude de-rating of
1.4°F (0.75°C) per 1000 ft (304.8m)
RH; noncondensing
Nonoperating
50 to 109.4°F (10 to 43°C)
Shipment
–40 to 140°F (–40 to +60°C)
Operating
8 to 80%
Shipment
5 to 100%
Maximum altitude
7000 ft
2133m
Acoustic noise
Operating minimum
L WAd (bels) 6.5
Airflow (cubic feet per
minute)
30 CFM minimum
75 CFM maximum
Remote management
IBM IMM with Virtual Media enabled
© 2010-2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 11 of 17
Data Sheet
Table 5.
Product Information for Cisco Unified Contact Center Express Appliance
Current Component
Current Value
Product part number
MCS7845I3-K9-CXA1
Preload
CXA1: Cisco Unified Contact Center Express 8.0
OS included
Yes
Processor
Single Intel 5540 Quad-core 2.53-GHz; last level cache: 8 MB
Memory included
6-GB (three 2-GB DIMM) PC3-10600 1333-MHz, fully buffered DDR-3 RDIMM
Memory maximum
128 GB (64 GB per processor slot)
Memory bus clock
Up to 1333 MHz
Memory technology
Registered PC3-10600 DDR-3 1333-MHz dual-rank DIMM
Multibit error mitigation
Advanced Chipkill ECC
Total DIMM slots
16 (8 per processor slot)
BIOS type
UEFI
Hard disks
Four 146-GB SAS 2.5-in. hot-swap
Hot-swappable bays
8
Hard disk interface type
SAS
Hard disk spindle speed
10,000 rpm
Hard disk seek time
4 ms (average)
Hard disk latency
3 ms (average)
Data transfer rate
Capable of 6 Gbps
Hard disk form size
2.5-inch SFF
RAID controller model
IBM mezzanine ServeRAID MR10i controller
RAID interface
Connected to motherboard
RAID cache
256 MB
BBWC
Yes
RAID level
Configured as two RAID 1 arrays
Ethernet NIC
Dual onboard 10/100/1000
Ethernet connectors
Two RJ-45 connectors on back of server
10BASE-T cable support
EIA Category 3, 4, or 5 UTP (2 or 4 pair) up to 328 ft (100m)
100BASE-TX cable support
EIA Category 5 UTP (2 pair) up to 328 ft (100m)
1000BASE-T cable support
EIA Category 6 UTP (recommended), 5E UTP, 5 UTP (2 pair) up to 328 ft (100m)
Serial ports
1
Parallel ports
0
USB 2.0 ports
6 (2 front, 2 rear, and 2 internal)
Keyboard ports
Use one of the USB ports (PS/2 ports are not provided)
Mouse ports
Use one of the USB ports (PS/2 ports are not provided)
Audio ports
None
VGA ports
1 front and 1 rear
System management ports
RJ-45 for IMM
8x PCIe non-hot plug slots
4
Dimensions (H x W x D)
Height: 3.346 in.
Height: 85.2 mm
Width:
● With top cover: 17.465 in.
Width:
● With top cover: 443.6 mm
● With front bezel: 18.976 in.
Depth:
● EIA flange to rear: 27.480 in.
● Overall: 28.791 in.
© 2010-2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
● With front bezel: 482.0 mm
Depth:
EIA flange to rear: 698 mm
Overall: 729 mm
Page 12 of 17
Data Sheet
Weight (maximum)
64 lb
Input requirements*
Rated line voltage: 100–127 VAC; 50 or 60 Hz
Input current (Amps)
29.03 kg
1.31 (idle)
2.25 (maximum measured)
7.8 (system rated)
60 (peak inrush current; 4ms)
Leakage current (mA)
0.94 (idle; maximum measured; system rated)
Power (watts)
154 (idle)
257 (maximum measured)
780 (system rated)
VA rating (VA)
157 (idle)
263 (maximum measured)
797 (system rated)
BTU rating (BTU/hr)
525 (idle)
875 (maximum measured)
2661 (system rated)
Rated line voltage: 200–240 VAC; 50 or 60 Hz
Input current (amps)
0.74 (idle)
1.23 (maximum measured)
3.9 (system rated)
60 (peak inrush current; 4ms)
Leakage current (mA)
0.94 (idle; maximum measured; system rated)
Power (watts)
151 (idle)
251 (maximum measured)
780 (system rated)
VA rating (VA)
154 (idle)
257 (maximum measured)
797 (system rated)
BTU rating (BTU/hr)
515 (idle)
855 (maximum measured)
2661 (system rated)
Power supply output power
Rated steady-state power
675W
Temperature range
Operating
50 to 95°F (10 to 35°C)
at 0–3000 ft (0-914.4m)
with an altitude de-rating of
1.4°F (0.75°C) per 1000 ft (304.8m)
Nonoperating
50 to 109.4°F (10 to 43°C)
Shipment
–40 to 140°F (–40 to +60°C)
Relative humidity (RH;
noncondensing)
Operating
8 to 80%
Shipment
5 to 100%
Maximum altitude
7000 ft
2133m
Acoustic noise
Operating minimum
L WAd (bels) 6.5
Airflow (cubic feet per
minute)
30 CFM minimum
75 CFM maximum
Remote management
IBM IMM with Virtual Media enabled
Compliance Specifications
●
FCC – Verified to comply with Part 15 of the FCC Rules, Class A (US Emissions)
●
ICES-003 Class A (Canada Emissions)
●
AS/NZS CISPR22 Class A (Australia/New Zealand Emissions)
●
CISPR22 Class A (International Emissions)
© 2010-2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 13 of 17
Data Sheet
●
EN55022 Class A (Europe Emission)
●
EN55024 (Europe Immunity)
●
IEC 61000-3-2 (Europe Emission)
●
IEC 61000-3-3 (Europe Emission)
●
KN22 Class A (Korea Emissions)
●
CNS13438 Class A (Taiwan Emissions)
●
GB9254 Class A (China CCC EMC)
●
GB4943 (China CCC Safety)
●
VCCI-03 Class A (Japan emissions)
●
CSA C22.2 No. 60950-1-03 (Canada Safety)
●
UL 60950-1 (US Safety)
●
IEC/EN 60950-1 (European Safety)
●
CE Mark (Low Voltage Directive 73/23/EEC, EMC Directive 89/336 EEC)
●
NOM (Mexico Safety)
●
KN24 Immunity Series (Korea Immunity)
Table 6.
Previously Released Configurations (Cisco MCS 7845-I2)
Previous Component
Previous Value
Product part number
MCS-7845-I2-CCE2
MCS-7845-I2-CCX2
MCS-7845-I2-ECS2
MCS-7845-I2-IPC2
MCS-7845-I2-RC2
MCS-7845-I2-MOB1
Preload
None
OS included
None
Processor
Dual Intel 5140 2.33-GHz 4M L2
Memory
4-GB (four 1-GB) PC2-5300R
Hard disks
Four 146-GB SAS 2.5-in. hot-swap
Remote management
IBM RSA II Slimline
Previous Component
Previous Value
Product part number
MCS-7845-I2-ECS3
MCS-7845-I2-CCE3
Preload
None
OS included
None
Processor
Dual Intel E5345 2.33-GHz 2x4M L2
Memory
4-GB (four 1-GB) PC2-5300R
Hard disks
Four 146-GB SAS 2.5-in. hot-swap
Remote management
IBM RSA II Slimline
Previous Component
Previous Value
Product part number
MCS-7845-I2-ECS4
MCS-7845-I2-CCE4
Preload
None
© 2010-2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 14 of 17
Data Sheet
OS Included
None
Processor
Dual Intel E5345 2.33-GHz 2x4M L2
Memory
4-GB (four 1-GB) PC2-5300R
Hard disks
Eight 146-GB SAS 2.5-in. hot-swap
Remote management
IBM RSA II Slimline
Ordering Information
To place an order, visit the Cisco Ordering Home Page and refer to Tables 6 through 8.
Table 7.
Ordering Information
Product Name
Ordering Information
Cisco Unified Application Environment
Refer to Cisco Unified Application Environment data sheet at:
http://www.cisco.com/en/US/products/ps7058/tsd_products_support_series_home.html
Cisco Unified Communications Manager
Cisco Emergency Responder
Refer to Cisco Unified Communications Solutions Ordering Guide at:
http://www.cisco.com/web/partners/downloads/sell/technology/storage/unifiedcomm/ucs1_og.p
df
Cisco Unified Intelligent Contact Management
Enterprise & Hosted
Refer to CCBU Ordering Guide at
http://www.cisco.com/web/partners/sell/technology/ipc/integratedCisco Unified Contact Center Enterprise & Hosted solutions/customer_contact_center.html
Cisco Unified Contact Center Express
Cisco Unified IP IVR
Cisco Unified Customer Voice Portal
Cisco Unity Connection
Cisco Unity
Refer to Cisco Unified Communications Applications Ordering Guide at
http://www.cisco.com/web/partners/sell/technology/ipc/integrated-solutions/uca.html
Cisco Unified MeetingPlace Conferencing
Cisco Unified MeetingPlace Express
Cisco Unified Presence
Cisco Unified Mobility Advantage
Server Spares
Table 8.
Ordering Information for Spare Servers by Application
Application
Spare Part Number
Cisco Unified Application Environment
MCS-7845-I3-IPC1
Cisco Unified Communications Manager
Cisco Emergency Responder
Cisco Unified Presence Server
Cisco Unified Intelligent Contact Management
Enterprise and Hosted
MCS-7845-I3-CCE1
MCS-7845-I3-CCE2
Cisco Unified Contact Center Enterprise and Hosted
Cisco Unified Customer Voice Portal
Cisco Unified Intelligence Suite
Cisco Unified E-mail/Web Interaction Manager
Cisco Unified Contact Center Management Portal
Cisco Unified Contact Center Express
MCS-7845-I3-CCX1
Cisco Unified IP IVR
MCS7845I3-K9-CXA1
Cisco Unified MeetingPlace Conferencing
MCS-7845-I3-RC1
Cisco Unified MeetingPlace Express
Cisco Unity
MCS-7845-I3-ECS1
Cisco Unity Connection 8.0
MCS7845I3-K9-UCC1
Cisco Unified Mobility Advantage
MCS-7845-I3-MOB1
© 2010-2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 15 of 17
Data Sheet
Field-Replaceable Spares
Table 9.
Ordering Information for Server Spare Parts
Spare Part Number
Description
Spare 146GB 10K SAS drive with 6Gbps controller
HDD-7835-I3-146=
Spare 300GB 10K SAS drive with 6Gbps controller
HDD-7835-I3-300=
Spare 2GB memory for the MCS-7845-I3
MEM-7845-I3-2GB=
Replacement Part Numbers
Table 9 provides the replacement part numbers for those products that are no longer orderable.
Table 10.
Replacement Part Numbers
Old Part Number
Replacement Part Number
MCS-7845-I2-CCE2/-CCE3/-CCE4
MCS-7845-I3-CCE1 or –CCE2 (refer to UCCE BOM at
http://www.cisco.com/en/US/products/sw/custcosw/ps1844/products_implementation_de
sign_guides_list.html )
MCS-7845-I2-CCX2
MCS-7845-I3-CCX1
MCS-7845-I2-ECS1
MCS-7845-I3-ECS1
MCS-7845-I2-ECS2
MCS-7845-I2-ECS3
MCS-7845-I2-ECS4
MCS-7845-I2-IPC2
MCS-7845-I3-IPC1
MCS-7845-I2-RC2
MCS-7845-I3-RC1
MCS-7845-I2-MOB1
MCS-7845-I3-MOB1
Warranty Information
Cisco offers a 1-year limited hardware warranty on Cisco Media Convergence Servers. For terms and conditions of
this warranty, refer to http://www.cisco.com/en/US/docs/general/warranty/English/1Y1DEN__.html.
Cisco Unified Communications Services
Cisco Unified Communications Services allows you to accelerate cost savings and productivity gains associated with
deploying a secure, resilient Cisco Unified Communications Solution. Delivered by Cisco and our certified partners,
our portfolio of services is based on proven methodologies for unifying voice, video, data, and mobile applications on
fixed and mobile networks. Our unique lifecycle approach to services can enhance your technology experience to
accelerate true business advantage.
Printed in USA
© 2010-2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
C78-564637-03
12/11
Page 16 of 17