D-Link DGS-1210-48 network switch

DGS-1210 Series
10/16/24/48-Port Web Smart Switch
Green Technology
ƒPower
ƒ
saving by link status
ƒPower
ƒ
saving by cable length
ƒProvides
ƒ
continuous, reliable and ecofriendly operation
ƒTime-based
ƒ
PoE (DGS-1210-10P only)
Security Features
ƒAccess
ƒ
Control List secures network
ƒD-Link
ƒ
Safeguard Engine protects CPU
from Broadcast/Multicast/Unicast
flooding
ƒPort
ƒ
Security supports 64 MACs per port
Intuitive Management
ƒManage
ƒ
using SmartConsole or webbased GUI
ƒBuilt-in
ƒ
MIB browser for SNMP
Management
ƒD-View
ƒ
6.0 module support
ƒCompact
ƒ
CLI through Telnet
VoIP Deployment
ƒHighest
ƒ
priority for VoIP services
ƒAuto
ƒ
Voice VLAN
QoS
ƒƒEnsure efficient delivery of timesensitive data
ƒƒSupports IEEE 802.1p QoS, up to 4 802.1p
Priority Queues per port
ƒDSCP
ƒ
Advanced Features
ƒLoopback
ƒ
Detection auto disables port
when loop is detected
ƒCable
ƒ
Diagnostics allows administrator
to determine cable status
ƒCombined
ƒ
copper/SFP ports for
increased flexibility
ƒConfigurable
ƒ
MDI/MDIX
ƒLLDP/LLDP-MED
ƒ
(DGS-1210-10P only)
Trap & Logs
ƒƒSNMP Trap supports link and STP state
change
ƒTrap
ƒ
for SmartConsole Utility
Online Help
ƒLink
ƒ
to local support web site
ƒDownloadable
ƒ
user guide
ƒReal-time
ƒ
manual checks
D-Link’s DGS-1210 Series is the latest generation
of Web Smart Switches featuring D-Link Green
Technology. The series integrates advanced
management and security functions that provide
performance and scalability. Additionally, the DES1210-10P’s 10/100/1000 Mbps ports are PoE-enabled,
offering ease-of-use and green features like timebased PoE, which allows for the power to be shut off
at a predetermined time. Compliant with 802.3af and
802.3at Pre-Standard, this switch is capable of feeding
power to devices up to 30 Watts. Management options
for the switches include SNMP, Web Management,
SmartConsole Utility, and Compact Command Lines.
The series also supports ACL filtering and D-Link’s
Safeguard Engine. The DGS-1210 Series uses Auto
Voice VLAN, ensuring higher priority for voice traffic.
The DGS-1210-10P comes with a fanless design in
a compact 13” desktop enclosure, the DGS-121016 and DGS-1210-24 feature a fanless design in 19”
metal cases. The DGS-1210-48 is equipped with two
smart fans which are set to low speed by default
and will automatically switch to high speed once
the temperature threshold is reached. A fanless
design allows for quieter operation and guarantees
an extended lifetime, while smart fans help to save
power.
D-Link Green
D-Link is constantly striving to take the lead in
developing innovative technology that allows
for power-saving without sacrificing operational
performance or functionality. The DGS-1210 Series
automatically detects the length of connected cables
and can adjust power usage by saving energy on
shorter cable connections of up to 20 meters. Link
status drastically reduces power consumption by
automatically toggling ports without a link to sleep
mode. The DGS-1210 Series takes the approach to
green IT one step further by incorporating a special
chipset with advanced silicon technology.
Seamless Integration
The DGS-1210 Series comes with Ethernet and Gigabit
copper ports capable of connecting to existing Cat.5
twisted-pair cables. Additionally, the last 2 or 4 ports
of the DGS-1210 Series combine SFP and copper
connectivity into one port and therefore provide a
more flexible solution for upstream or downstream
server connections via fiber interface. Using the
default presets, the administrator can quickly set up
the switch without reconfiguring any settings.
Extensive Layer 2 Features
Equipped with a complete lineup of L2 features, these
switches include IGMP Snooping, Port Mirroring,
Spanning Tree and Link Aggregation Control Protocol
(LACP). The IEEE 802.3x Flow Control function allows
servers to directly connect to the switch for fast,
reliable data transfer. At 2000 Mbps Full Duplex,
the Gigabit ports provide high-speed data pipes to
servers with minimum data transfer loss. Network
maintenance features include Loopback Detection
and Cable Diagnostics. Loopback Detection is
used to detect loops created by a specific port and
automatically shut down the affected port. The
Cable Diagnostic feature, designed primarily for
adminstrators and customer service representatives,
can rapidly discover the type of error and determine
the cable quality.
QoS, Bandwidth Control
The switches are perfect for deployment in a VoIP
environment, as they support Auto Voice VLAN and
Differentiated Services Code Point (DSCP) QoS
for VoIP. Auto Voice VLAN will automatically place
voice traffic from an IP phone to an assigned VLAN
and by doing so enhance the VoIP service. With
a higher priority and individual VLAN, this feature
guarantees the quality and security of VoIP traffic.
DSCP marks parts of an IP packet, enabling different
levels of service to be assigned for network traffic.
With Bandwidth Control, network administrators can
reserve bandwidth for important functions that require
a larger bandwidth or might have high priority.
01
DGS-1210 Series
10/16/24/48-Port Web Smart Switch
Secure your Network
D-Link’s innovative Safeguard Engine protects the
switches against traffic flooding caused by virus
attacks. The switches also support 802.1X portbased authentication, allowing the network to be
authenticated through external RADIUS servers.
In addition, the Access Control List (ACL) feature
enhances network security and helps to protect the
internal IT network. The DGS-1210 Series includes
ARP Spoofing Prevention, which protects from
attacks on the Ethernet network that may allow an
intruder to sniff data frames, modify traffic, or bring
traffic to a halt altogether by sending fake ARP
messages to the network. To prevent ARP Spoofing
attacks, the switch uses Packet Control ACLs to block
invalid packets that contain fake ARP messages. For
added security, the DHCP Server Screening feature
screens rogue DHCP server packets from user ports
to prevent unauthorized IP assignment.
Versatile Management
The DGS-1210 series provides a SmartConsole utility
and a web-based management interface that enables
administrators to remotely control their network
down to the port level. The SmartConsole easily
allows customers to discover multiple D-Link Web
Smart Switches within the same L2 network segment.
With this utility, users do not need to change the IP
address of their PC. It also simplifies the initial setup
of the Smart Switches. Switches within the same L2
network segment that are connected to the user’s
PC are displayed on screen for instant access. This
allows extensive switch configuration and basic
setup of discovered devices including password
changes and firmware upgrades. The DGS-1210
Series also supports D-View 6.0 and Compact
Command Line Interface (CLI) through Telnet. D-View
6.0 is a Network Management System that allows
for the central management of critical network
characteristics such as availability, reliability,
resilience, and security. CLI management of the
switches is possible via Telnet. This makes it possible
to adjust basic settings, passwords, configuration
files, and firmware with ease.
02
DGS-1210 Series
10/16/24/48-Port Web Smart Switch
Technical Specifications
General
Port Standards &
Functions
IEEE 802.3 10BASE-T Ethernet (twisted-pair copper)
IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper)
IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted- pair copper)
Auto-negotiation
IEEE 802.3x Flow Control
Number of Ports
DGS-1210-10P: 8 PoE 10/100/1000 Mbps, 2 combo 10/100/1000BASE-T/SFP
DGS-1210-16: 12 10/100/1000 Mbps, 4 combo 10/100/1000BASE-T/SFP
DGS-1210-24: 20 10/100/1000 Mbps, 4 combo 10/100/1000BASE-T/SFP
DGS-1210-48: 44 10/100/1000 Mbps, 4 combo 10/100/1000BASE-T/SFP
Network Cables
UTP Cat. 5, Cat. 5e (100 m max.)
EIA/TIA-568 100-ohm STP (100 m max.)
Full/Half Duplex
Full/half duplex for 10/100 Mbps speeds
Full duplex for Gigabit speed
Media Interface Exchange
Performance
Switching Capacity
Auto MDI/MDIX adjustment for all twisted-pair ports
DGS-1210-10P: 20 Gbps
DGS-1210-16: 32 Gbps
DGS-1210-24: 48 Gbps
DGS-1210-48: 96 Gbps
Transmission Method
MAC Address Table
MAC Address Update
Store-and-forward
8 K entries per device
Up to 256 static MAC entries
Enable/disable auto-learning of MAC addresses
Maximum 64 bytes packet
forwarding rate
DGS-1210-10P: 14.88 Mpps
DGS-1210-16: 23.8 Mpps
DGS-1210-24: 35.7 Mpps
DGS-1210-48: 71.4 Mpps
RAM Buffer
DGS-1210-10P: 512 KB per device
DGS-1210-16: 512 KB per device
DGS-1210-24: 512 KB per device
DGS-1210-48: 1 MB per device
PoE*
PoE Standard
PoE Capable Ports
802.3af & Pre-standard 802.3at
Ports 1 to 8 : 15.4 W or 30 W
Max. 30 W on 2 10/100/1000 Mbps ports
Max. 15.4 W on 4 10/100/1000 Mbps ports
Max. 7.5 W on 8 10/100/1000 Mbps ports
PoE Power Budget
Max. 78 W
* PoE features available on DGS-1210-10P only
03
DGS-1210 Series
10/16/24/48-Port Web Smart Switch
Physical &
Environmental
AC Input
Maximum Power
Consumption
100 to 240 VAC 50/60 Hz internal universal power supply
DGS-1210-10P: 109.6 W (PoE on), 14.45 W (PoE off)
DGS-1210-16: 17.4 W
DGS-1210-24: 24.1 W
DGS-1210-48: 59.1 W
Standby Power
Consumption
DGS-1210-10P: 7 W/110 V, 7.8 W/240 V
DGS-1210-16: 4.9 W/110 V, 5 W/240 V
DGS-1210-24: 6 W/110 V, 6.2 W/240 V
DGS-1210-48: 19.2 W/110 V, 20.1 W/240 V
Fan Quantity
DGS-1210-10P: 0
DGS-1210-16: 0
DGS-1210-24: 0
DGS-1210-48: 2 smart fans (default fan speed is low, fans switch to high speed automatically at 33 degrees Celsius ambient temperature)
Acoustics
DGS-1210-10P: 0 dBA
DGS-1210-16: 0 dBA
DGS-1210-24: 0 dBA
DGS-1210-48: 46.2 dBA (max.)
Heat Dissipation
DGS-1210-10P: 373.96 BTU/hr
DGS-1210-16: 59.23 BTU/hr
DGS-1210-24: 82.23 BTU/hr
DGS-1210-48: 201.65 BTU/hr
Operating Temperature
Storage Temperature
0˚ to 40˚ C
-10˚ to 70˚ C
Operating Humidity
10% to 95% non-condensing
Storage Humidity
5% to 95% non-condensing
Dimensions
DGS-1210-10P: 330 mm x 180 mm x 44 mm (13” desktop enclosure, 1U height)
DGS-1210-16: 440 mm x 210 mm x 44 mm (19” standard rack mounting width, 1U height)
DGS-1210-24: 440 mm x 210 mm x 44 mm (19” standard rack mounting width, 1U height)
DGS-1210-48: 440 mm x 250 mm x 44 mm (19” standard rack mounting width, 1U height)
Weight
DGS-1210-10P: 1.84 kg
DGS-1210-16: 2.87 kg
DGS-1210-24: 2.97 kg
DGS-1210-48: 4.04 kg
Diagnostic LEDs
Power (Per device)
Fan error (Per device, optional)
Link/Activity/Speed (Per 10/100/1000 Mbps port)
Link/Activity/Speed (Per SFP port)
Emission (EMI)
FCC Class A
CE Class A
IC Class A
VCCI Class A
C-Tick
MTBF
DGS-1210-10P: 205,249 hours
DGS-1210-16: 799,491 hours
DGS-1210-24: 410,948 hours
DGS-1210-48: 322,402 hours
Safety
cUL, LVD
04
DGS-1210 Series
10/16/24/48-Port Web Smart Switch
Software Features
L2 Features
ƒƒMAC Address Table
-- 8 K
ƒƒFlow Control
-- 802.3x Flow Control
-- HOL Blocking Prevention
ƒƒIGMP Snooping
-- IGMP v1/v2 Snooping
-- Supports 256 IGMP groups
-- Supports at least 64 static multicast addresses
-- IGMP per VLAN
-- Supports IGMP Snooping Querier
ƒƒSpanning Tree Protocol
-- 802.1D STP
-- 802.1w RSTP
ƒƒLoopback Detection
ƒƒ802.3ad Link Aggregation
-- DGS-1210-10P:
Max. 5 groups per device/8 ports per group
-- DGS-1210-16/DGS-1210-24/DGS-1210-48:
Max. 8 groups per device/8 ports per group
ƒƒPort Mirroring
-- One-to-One
-- Many-to-One
-- Supports Mirroring for Tx/Rx/Both
ƒƒCable Diagnostics
ƒƒConfigurable Auto MDI/MDIX
ƒƒMulticast Filtering
-- Forwards all unregistered groups
-- Filters all unregistered groups
VLAN
ƒƒ802.1Q
ƒƒVLAN Group
-- Max. 256 static VLAN groups
-- Max. 4094 VIDs
ƒƒManagement VLAN
ƒƒAsymmetric VLAN
ƒƒAuto Voice VLAN
-- Max. 10 user defined OUI
-- Max. 8 default OUI
QoS (Quality of Service)
ƒƒ802.1p Quality of Service
ƒƒ4 queues per port
ƒƒQueue Handling
-- Strict
-- Weighted Round Robin (WRR)
ƒƒCoS based on
-- 802.1p Priority Queues
-- DSCP
ƒƒBandwidth Control
-- Port-based (Ingress/Egress, min. granularity 64 Kb/s)
Access Control List (ACL)
ƒƒMax. 50 profiles
ƒƒMax. 240 rules shared by profiles
ƒƒACL based on
-- MAC Address
-- IPv4 Address (ICMP/IGMP/TCP/UDP)
-- VLAN ID
-- 802.1p Priority
-- DSCP
ƒƒACL Actions
-- Permit
-- Deny
Security
ƒƒ802.1X
ƒƒPort Security
-- Supports up to 64 MAC addresses per port
ƒƒBroadcast/Multicast/Unicast Storm Control
ƒƒStatic MAC
ƒƒD-Link Safeguard Engine
ƒƒDHCP Server Screening*
ƒƒARP Spoofing Prevention*
-- Max. 64 entries
ƒƒSSL*
-- Supports v1/v2/v3
-- Supports IPv4
MIB
ƒƒ1213 MIB II
ƒƒ1493 Bridge MIB
ƒƒ1907 SNMP v2 MIB
ƒƒ1215 Trap Convention MIB
ƒƒ2233 Interface Group MIB
ƒƒD-Link Private MIB
ƒƒRFC 1239 Standard MIB
ƒƒRFC 1350 TFTP
ƒƒRFC 1493 Bridge MIB
ƒƒRFC 1519 CIDR
ƒƒRFC 1945 HTTP/1.0
ƒƒRFC 2131 DHCP
ƒƒRFC 2132 DHCP Options and BOOTP Vendor Extensions
ƒƒRFC 2138 Radius Authentication
ƒƒRFC 2233 Interface MIB
ƒƒRFC 2578 Structure of Management Information
Version 2 (SMIv2)
ƒƒRFC 2647 802.1p
ƒƒRFC 3416 SNMP
ƒƒRFC 3417 SNMP
ƒƒRFC 3621 Power Ethernet
Management
ƒƒWeb-based GUI
ƒƒCompact CLI through Telnet
ƒƒTelnet Server
ƒƒTFTP Client
ƒƒSNMP
-- Supports v1/v2/v3*
ƒƒSNMP Trap
ƒƒTrap for SmartConsole Utility
ƒƒSystem Log
-- Max. 500 log entries
-- Supports IPv4 log server
ƒƒBootP/DHCP Client
ƒƒTime Setting
-- SNTP
ƒƒLLDP, LLDP-MED
ƒƒTime-based PoE
RFC Standard Compliance
ƒƒRFC 768 UDP
ƒƒRFC 791 IP
ƒƒRFC 792 ICMP
ƒƒRFC 793 TCP
ƒƒRFC 826 ARP
ƒƒRFC 854 Telnet Server
ƒƒRFC 855 Telnet Server
ƒƒRFC 856 Telnet Binary Transmission
ƒƒRFC 858 Telnet Server
ƒƒRFC 896 Congestion Control in TCP/IP Network
ƒƒRFC 903 Reverse Address Resolution Protocol
ƒƒRFC 951 BootP Client
ƒƒRFC 1155 MIB
ƒƒRFC 1157 SNMP v1
ƒƒRFC 1191 Path MTU Discovery
ƒƒRFC 1212 Concise MIB Definition
ƒƒRFC 1213 MIB II, IF MIB
ƒƒRFC 1215 Traps for use with the SNMP
* Available in future release
05
DGS-1210 Series
Optional Products
Optional SFP Transceivers
Optional WDM SFP Transceivers
DEM-310GT
DEM-311GT
DEM-312GT2
DEM-314GT
DEM-315GT
DEM-210
DEM-211
DEM-220R
1000BASE-LX, Single-mode, 10 km
1000BASE-SX, Multi-mode, 550 m
1000BASE-SX, Multi-mode, 2 km
1000BASE-LX, Single-mode, 50 km
1000BASE-LX, Single-mode, 80 km
100BASE-FX, Single-mode, 15 km
100BASE-FX, Multi-mode, 2 km
DEM-220T
DEM-330T
DEM-330R
DEM-331T
DEM-331R
100BASE-BX, Wavelength
Tx:1550 nm Rx:1310 nm,
Single-mode, 20 km
100BASE-BX, Wavelength
Tx:1550 nm Rx:1310 nm,
Single-mode, 20 km
1000BASE-LX, Wavelength
Tx:1550 nm Rx:1310 nm,
Single-mode, 10 km
1000BASE-LX, Wavelength
Tx:1310 nm Rx:1550 nm,
Single-mode, 10 km
1000BASE-LX, Wavelength
Tx:1550 nm Rx:1310 nm,
Single-mode, 40 km
1000BASE-LX, Wavelength
Tx:1310 nm Rx:1550 nm,
Single-mode, 40 km
Deploying the DGS-1210 Series in an Office Environment
C
US
ACN 052 202 838
I
D-Link Corporation
No. 289 Xinhu 3rd Road, Neihu, Taipei 114, Taiwan
Specifications are subject to change without notice.
D-Link is a registered trademark of D-Link Corporation and its overseas subsidiaries.
All other trademarks belong to their respective owners.
©2010 D-Link Corporation. All rights reserved.
Release 02 (February 2010)
06