Wireless Client Bridge/AP/ WDS
2.4GHz
802.11 b/g
ECB-3610S
54 Mbps
ECB-3610S Wireless High Power and High Gain Client
Bridge/Access Point/ WDS (wireless distribution system) operates in the
2.4 GHz frequency spectrum supporting the 802.11b (2.4GHz, 11Mbps)
and the newer, faster 802.11g (2.4GHz, 54Mbps) wireless standards. It's
the best way to add wireless capability to your existing wired network, or
to add bandwidth to your wireless installation.
To protect your wireless connectivity, it can encrypt all wireless
transmissions through 64/128-bit WEP data encryption and also supports
WPA. The MAC address filter lets you select exactly which stations
should have access to your network. With the Wireless Multi-Client
Bridge/Access Point/WDS, you'll experience the best wireless connectivity available today.
Features
Benefits
High Speed Data Rate Up to 54Mbps
Capable of handling heavy data payloads such as
MPEG video streaming
High Output Power up to 28dBm
Excellent output power spreads the operation distance
IEEE 802.11b/g Compliant
Fully Interoperable with IEEE 802.11b/IEEE802.11g
compliant devices
Point-to-point, Point-to-multipoint Wireless
Connectivity
Let users transfer data between two buildings or
multiple buildings
WPA/WPA2/ IEEE 802.1x support
Powerful data security
Hide SSID (AP Mode)
Avoids unallowable users sharing bandwidth,
increases efficiency of the network
DHCP Client/ Server
Simplifies network administration
WDS (Wireless Distributed System)
Make wireless AP and Bridge mode simultaneously
as a wireless repeater
MAC address filtering (AP Mode)
Ensures secure network connection
Power-over-Ethernet (IEEE802.3af)
Flexible Access Point locations and cost savings
Support Multi-SSID function (4 SSID)
Allow clients to access different networks through a
single access point and assign different policies and
functions for each SSID by manager
Layer 2 isolation (AP mode)
Improved the security of each client
* Theoretical wireless signal rate based on IEEE standard of 802.11a, b, g chipset used. Actual throughput
may vary. Network conditions and environmental factors lower actual throughput rate.
** All specifications are subject to change without notice.
1/30/2008
Technical Specifications
Data Rates
1, 2, 5.5, 6, 9, 11, 12, 18, 24,
36, 48, 54 Mbps
Standards
IEEE802.11b/g, IEEE802.3,
IEEE802.3u, IEEE802.3af,
IEEE802.1f, IEEE802.1x
Compatibility
IEEE 802.11g/ IEEE 802.11b
Power Requirements
Power Supply: 90 to 240 VDC
± 10% (depends on different
countries)
Device: 12 V/ 1A
Status LEDs
LAN: Link, WLAN: Link, Power:
on/off
Regulation Certifications
FCC Part 15 B & C,
CE: EN 300328, EN 301489
EN 60950
RF Information
Frequency Band
802.11b/g: U.S., Europe and
Japan product covering 2.4 to
2.484 GHz, programmable for
different country regulations
Media Access Protocol
Carrier Sense Multiple Access
with Collision Avoidance
(CSMA/CA)
Modulation Technology
Orthogonal Frequency
Division Multiplexing (OFDM)
DBPSK @ 1Mbps
DQPSK @2Mbps
CCK @ 5.5 & 11Mbps
BPSK @ 6 and 9 Mbps
QPSK @ 12 and 18 Mbps
16-QAM @ 24 and 36 Mbps
64-QAM @ 48 and 54 Mbps
Operating Channels
11 for North America
14 for Japan
13 for Europe
Receive Sensitivity (Typical)
802.11g:
-90 dBm @ 6Mbps,
-74 dBm @ 54Mbp
802.11b:
-95 dBm @ 1Mbps
-90 dBm @ 11Mbps
Available Transmit Power
(Typical)
• 2.4~2.462G(IEEE802.11g)
27dBm @6 ~ 24Mbps
25dBm@36Mbps
24 dBm@48Mbps
23dBm@54Mbps
• 2.4~2.462G(IEEE802.11b)
28dBm. @1, 2, 5.5 and 11Mbps
RF Connector
TNC Type (Female Reverse)
Storage: -20°Cto 70°C (-4°F to
158°F)
Humidity (non-condensing)
5%~95% Typical
Package Contents
One AP/ CB Device
One TNC Dipole Antenna
One Power Adapter
One CAT5 UTP Cable
One Quick Start Guide
One CD-ROM with User’s
Manual
Networking
Topology
Ad-Hoc, Infrastructure
Operation Mode
Point-to-Point/ Point-to-Multipoint
Bridge/ AP/ Client Bridge/ WDS
Interface
Wireless IEEE802.11b/g
One 10/100Mbps RJ-45 LAN Port
Security
z IEEE802.1x Authenticator /
RADIUS Client (EAPMD5/TLS/TTLS) Support in AP
Mode
z IEEE802.1x Supplicant (EAPMD5/TLS/TTLS, PEAP) support
in Client Bridge Mode
z WPA /WPA2/ Pre Share KEY
(PSK) with TKIP/AES
z MAC address filtering (AP only)
z Hide SSID in beacons
z VLAN Pass-through
z L2 Isolation(AP mode)
IP Auto-configuration
DHCP client/server
Management
Configuration
Web-based configuration (HTTP)
Telnet Configuration
SNMP V1, V2c, MIBI&II
Firmware Upgrade
Upgrade firmware via web-browser
Environmental
Temperature Range
Operating: 0°C to 45°C (32°F to
113°F)
* Theoretical wireless signal rate based on IEEE standard of 802.11a, b, g chipset used. Actual throughput
may vary. Network conditions and environmental factors lower actual throughput rate.
** All specifications are subject to change without notice.
1/30/2008