Network Disk Recorder
WJ-ND300A
WJ-ND300A (120 V AC)
WJ-ND300A (220 ~ 240 V AC)
Network Disk Recorder with expandable capacity for
digital image data from up to 32 Network Cameras
Key Features
• H.264, MPEG-4 and JPEG multi format
• Up to 32 network cameras can be connected and recorded.
• Various Recording Modes: Manual, Schedule, Event (Pre/Post),
Emergency, External Timer
• Various alarm sources include 16x Terminal inputs, 16x Camera
alarms, Panasonic Alarm Protocol. Flexible alarm actions include
Alarm recording, E-mail notification, Alarm message, Camera
positioning, FTP image transfer, Terminal output, Panasonic alarm
protocol output, Buzzer and Indicator.
• Panasonic Camera Control: Pan/Tilt, Zoom, Focus, Brightness,
Preset Position, Auto mode (depending on camera model).
• Cameras may be assigned to one of the 8 groups to meet
application requirements.
• Flexible Playback Controls: A-B Repeat, Goto Date (Jump to specific
time/date), Goto Last (Jump to 5 sec. ~ 5 min. before the record end).
• Various Display Modes: Spot, Quad (8 patterns), Spot Sequence,
Quad Sequence.
• 8 Quad screens are fully programmable. Any of the 32 cameras can
be assigned to any area of the Quad screens.
• Filtered Search: Time & Date, Event Type, Camera number, Text
• Recorded images can be downloaded to a PC.
• Downloadable viewer software allows playback of images
downloaded from the Recorder.
• 2 setup modes available, Quick/Advanced at users’ preference.
• 2 built-in network interfaces (10Base-T/100Base-TX) for camera
access and client access. Operation by one port is also possible.
• Quick IP Setup for Panasonic i-Pro series network cameras
• Bandwidth control: 32 k / 64 k / 128 k / 256 k / 512 k / 1,024 k / 2 M /
5 M / 10 M (bps) and unlimited
• Up to 8 clients can monitor images and control WJ-ND300A simultaneously.
• Image transfer to FTP server: Recorded image upon alarm and/or
live image periodically
• Performance measurement function for appropriate recording frame
rate setup
• Images recorded on the SD memory card in the i-Pro series
cameras can be downloaded to the recorder manually. In addition,
recordings upon network failure can be transferred automatically
when the recorder is in non-recording status.
• Alarm notification by e-mail.
• User/Host authentication, 4 user levels and User-Camera
View/Control partitioning set up for sophisticated user management
of up to 32 user registrations.
• Multi-recorder, Multi-site system can be made with optional WVASM100 i-Pro Management Software.
• Front panel LCD screen for status display
• HDD capacity is expandable with 4 HDD slots in the main unit and
up to 6 WJ-HDE300 optional Extension Units each with 4 HDD slots.
• Disk partitioning for flexible record management: Normal, Event, Copy
• HDD Safety Mode to protect HDDs during the installation of WJ-ND300A
• RAID5 capability with optional WJ-NDB301 RAID5 Board
Standard Accessories
• CD-ROM* ...................................... 1 pc.
• Installation Guide .......................... 1 pc.
The followings are for installation:
• Power Cord (NTSC model) ........... 1 pc.
• Power Cord (PAL model) ............ 2 pcs.
• Rack Mount Bracket ................... 2 pcs.
• Rack Mount Bracket Fixing Screw ... 4 pcs.
• Hard Disk Drive Fixing Screw
(w/sleeve and damper) .............. 12 pcs.
* The CD-ROM contains the operating
instructions (PDFs) and the setup tools
(Panasonic IP setup software, etc.).
Optional Accessories
RAID5 Board
Extension Unit
WJ-NDB301
WJ-HDE300
(4 HDD slots for optional
HDD units)
Power Source
: 120 V AC, 60 Hz (NTSC)
220 ~ 240 V AC, 50 Hz (PAL)
Power Consumption: approx. 85 W (including 4 HDDs when installed)
Dimensions
: 420 mm (W) x 88 mm (H) x 350 mm (D)
(19-9/16” (W) x 3-7/16” (H) x 13-13/16” (D))
(excluding rubber feet and projections)
Weight
: 7.2 kg (16 lbs.) (When no HDD exist)
Specifications
Weight
NTSC
PAL
UL (6500), FCC (Part15 ClassA), CE (EN60065, EN55022 ClassB, EN55024),
C-UL (E60065), DOC (ICES003 ClassA) GOST (GOST R 51558)
120 V AC, 60 Hz
220 ~ 240 V AC, 50 Hz
approx. 85 W
+5 °C ~ +45 °C (41 °F ~ 113 °F)
5 % ~ 90 % (without condensation)
2,000 m (6,500 feet) above sea level
420 mm (W) x 88 mm (H) x 350 mm (D) (16-9/16" (W) x 3-7/16" (H) x 13-3/4" (D))
(excluding rubber feet and projections)
8.3 kg (18.3 lbs.)
*1: Non-voltage make contact, +5 V pull-up 150 Ω *2: Open collector output, 24 V max., –100 mA
*3: High (+5 V ~ +12 V, 6.3 mA maximum) *4: 52 kΩ, 5 V pull-up, –100 mA / make contact *5: 200 mA at maximum
Part Names and Functions
Front View
PULL
HDD1
HDD2
HDD3
HDD4
ARARM
ARARM
SUSPEND
ERROR TIMER
REC
LINK1
LINK2
ESC
SET
OPERATE
PC Link Indicator
HDD Access Indicators
LCD
Arrow Button
Escape Button
Set Button
Maintenance Port
Operate Indicator
Alarm Suspension Indicator
Alarm Indicator
Error Indicator
Timer Indicator
Recording Indicator
Camera Link Indicator
MAINTENANCE
Rear View
SIGNAL GND
POWER
AC IN
ALARM
10/100BASE-T
SERIAL
EXT STORAGE
PC
ALARM/CONTROL
CAMERA
External Storage Connector
Client PC Port
Camera Port
Serial Connector (for maintenance purpose)
Alarm/Control Connector
Alarm Connector
Signal Ground Terminal
Power Switch
Power Cord Inlet
Appearance
CAMERA
PC
ALARM/CONTROL
SERIAL
10/100BASE-T
ALARM
POWER
AC IN
SIGNAL GND
88
(3-7/16")
REC
LINK1
HDD2
HDD3
HDD4
LINK2
ESC
OPERATE
320(12-5/8")
Unit: mm (inches)
SET
MAINTENANCE
Network Disk Recorder
WJ-ND
10.5
(7/16")
ERROR TIMER
76(2")
PULL
HDD1
ARARM
ARARM
SUSPEND
(Mounting Pitch)
480(18-7/8")
465(18-5/16")(Mounting Pitch)
420(16-9/16")
88(3-7/16")
350(13-3/4")
8.8(3/8") 40(1-9/16") 270(10-5/8")
CAUTION
Trademarks and registered trademarks
– Microsoft, and Windows are registered trademarks of Microsoft Corporation in the U.S. and other countries.
– Axis is a registered trademark of Axis Communications AB.
– "Super Dynamic", "SDII", "SDIII" and "i-Pro" logos are trademarks or registered trademarks of
Panasonic Corporation.
Important
– Safety Precaution: carefully read the operating instructions and installation manual before using this product.
– Panasonic can not be responsible for network performance and/or other manufacturer products that
reside on the network.
TV System
General
Safety/EMC Standard
Specifications
Power Source
Power Consumption
Ambient Operating Temperature
Ambient Operating Humidity
Maximum Operating Altitude
Dimensions
ATTENTION
NTSC
PAL
Panasonic i-Pro series Network cameras. (Contact Panasonic for BB series and Axis® cameras)
H.264, MPEG-4 (Specific cameras), JPEG, M-JPEG
1,280 x 960, 960 x 720, 640 x 480, 320 x 240 (Depending on the camera)
32
Manual recording, Scheduled recording, Emergency recording,
External timer recording, Event recording
Pre-alarm Recording
Up to 60 minutes. Dedicated HDD for Pre-alarm is required
Scheduled Recording Mode 4 programs, 6 time zones/day, Independent setup for each day of the week.
Frame Rate/Camera
Up to 30 ips (Depending on the camera and Network)
Pan/Tilt, Zoom, Focus, Brightness, Preset position call and program (up to 256), Auto mode
Browser Camera Control
GUI
REC/Playback Control REC, PLAY, Rev PLAY, Pause, Stop, FF, REW, Prev Record, Next Record, Prev Image,
Next Image, A-B Repeat, Goto Date, Goto Last (5 sec. ~ 5 min.), Text display
Search Mode
Search criteria: Time date, Event type, Camera number, Text ON/OFF
Display Mode
Spot/Quad (8 patternes)/Spot Sequence/Quad Sequence (Live, Playback)
Camera Grouping
8 groups each with 16 characters title
Recorded data of selected camera and time range (up to 20 min.) can be
Image Download
downloaded to a PC. Viewer software can be downloaded separately.
SD Memory
Image data in the SD memory installed in the selected camera
Data Download
can be transferred to the recorder.
Recorded data of selected cameras and time date range can be copied to the COPY partition.
Copy
Camera Title
On the browser, Up to 16 characters
Clock Display
On the browser. Time: 12H/24H, Date: 3 formats
Alarm Control
Reset, Suspend
Digital Zoom
Up to 4 times
Free comment can be attached for each record and reviewed at later time. Up to 200 characters
Text Attachment
System Log
Operator access (100), Network error (1,000), Error (100), Event (750)
Time Synchronization
Terminal (Master or Slave), NTP (Client)
Summer Time
User definable (using menu setup)
GUI / System Setup Language English, French, Italian, Spanish, German, Russian, Chinese, Japanese
Supported OS
Microsoft® Windows® 7 Professional 64 bit/32 bit & Windows® Internet Explorer® 8.0 32 bit,
and Browser
Microsoft® Windows Vista® 32 bit SP1 & Windows® Internet Explorer® 7.0,
Combination
Microsoft® Windows® XP Home/Professional SP3 & Windows® Internet Explorer® 6.0
The language of OS must be the same as selected GUI language.
Required PC JPEG/
CPU: Intel® Pentium® 4 3.0 GHz or faster, RAM: 1 GB or more,
MPEG-4 VRAM: 128 MB or more (Min. 64 MB), Microsoft® DirectX® 9.0c or later
H.264
CPU: Intel® CoreTM i7-920 or faster, RAM: 3 GB or more,
VRAM: 128 MB or more (Min. 64 MB), Microsoft® DirectX® 9.0c or later
Alarm/
Alarm Source
16x Terminal inputs, 16x Camera alarms, Panasonic Alarm Protocol
Event
Event Mode
Alarm/Activity/OFF
Alarm recording, E-mail notification, Alarm message, Camera positioning,
Alarm Action
FTP image transfer, Terminal output, Panasonic alarm protocol output, Buzzer, Indicator
Alarm Control
Reset, Suspend
Event Log
750
Camera port: 10Base-T/100Base-TX (RJ-45) Client port: 10Base-T/100Base-TX (RJ-45)
Network Network Interface
Maintenance port: 10Base-T (RJ-45)
Maximum Band Width
Total 97 Mbps
Bandwidth Control (Client Port) 32 k / 64 k / 128 k / 256 k / 512 k / 1,024 k / 2 M / 5 M / 10 M (bps) and unlimited
Supported Protocol
TCP/IP, UDP/IP, HTTP, FTP, SMTP, DHCP, DNS, DDNS, NTP, SNMP, RTP
E-mail
Upon Alarm or Warning
No. of Client at a Time 8
User Registration
Up to 32 users
User Level
4 Levels (Programmable)
Partitioning
User - Camera (View only, View & Control, No Access)
User authentication (ID and Password), Host authentication (IP address), Alteration detection
Security Method
External Alarm Connector Alarm
Alarm input 1 ~ 16*1, Alarm output 1 ~ 7*2
Interface (25pin D-sub)
Alarm output 8 ~ 16*2 Alarm suspension input*1, Alarm reset input*1
Alarm/
Alarm
Control
Control
Emergency recording input*1, Power outage detection input*1,
External recording mode switching*1, Power outage recovery completion output*3,
Connector
(25pin D-sub)
Time adjustment input/output*4, +5 V output*5
Error/
Network error output*2, Available disk space warning output*2,
Warning HDD error output*2, Camera error output*2, Error output*2
High-speed serial interface 480 Mbps (theoretical value) for WJ-HDE300 Extension Unit
External Strage
RS-232C
For servicing purpose only
HDD
Type
1x 3.5 inch 250 GB HDD (Factory default),
Up to 4x 2 TB HDDs can be installed. (Contact Panasonic for detail)
Maximum Capacity
56 TB (with 6x WJ-HDE300 Extension Units, 4x 2 TB HDDs installed in each unit)
RAID
RAID5 supported (with WJ-NDB301 RAID5 Board)
Partitioning
Normal/Event/Copy
Play, Rev Play, Pause, FF, REW, Prev Record, Next Record, Prev Image, Next Image
Viewer
Playback Control
Software Additional Functions
Alteration detection, Save as JPEG, Two times zoom, Print
Supported OS, Language Same as browser GUI, Language of the software will be English
Admin Software Supported OS, Language Same as browser GUI, Language of the software will be English
Quick IP Setup Supported OS,
Same as browser GUI, Language of the software will be English
Software Language
EXT STORAGE
TV System
Supported Supported Cameras
Cameras Supported Image Format
Supported Image Resolution
Maximum Number of Cameras
Recording Recording Mode
• All TV pictures are simulated.
• Weights and dimensions are approximate.
• Specifications are subject to change without notice.
• These products may be subject to export control regulations.
• All product pictures are NTSC models.
DISTRIBUTED BY:
http://panasonic.net/security/
Printed in Japan (2A-001BA)