Panasonic VIDEO ENCODER FORM ANALOG TO IP

4CH MPEG-4/JPEG Video Encoder with Video Analytic
WJ-NT314
4CH MPEG-4/JPEG Video Encoder
WJ-NT304
WJ-NT314 (12 V DC, 120 V AC adapter attached)
WJ-NT304 (12 V DC, 120 V AC adapter attached)
WJ-NT314 (12 V DC, 220 ~ 240 V AC adapter attached)
WJ-NT304 (12 V DC, 220 ~ 240 V AC adapter attached)
4CH MPEG-4/JPEG dual streaming Video Encoder
featuring 2CH Video Analytic (WJ-NT314)
Key Features
• Up to 4 analog cameras can be connected.
• MPEG-4/JPEG digital signal output at VGA image size with up to 30 ips
• MPEG-4 and JPEG dual stream output for simultaneous real time
monitoring and high resolution recording
• Progressive output allows every frame to be clear even when the
subject is moving.
• Video Analytic (WJ-NT314 only): 8 detection programs, each with
3 intruder detection areas and 1 object abandonment/removal
detection area. Up to 8 detected objects per channel can be traced.
Depth correction allows more accurate detection when the scene
includes deeper depth.
• Panasonic Camera Control: Pan / Tilt / Zoom / Focus / Iris / Preset
position (up to 256), Auto mode, Setup menu. AUX, B/W ON/OFF/
Auto, Click centering
• Unit title display: Up to 20 alphanumeric characters on browser
• Camera title display: Up to 20 alphanumeric characters on browser
• SD memory card slot for alarm recording and backup upon network
failure. Recorded data can be downloaded by using FTP command.
• Alarm sources including 2x AVMD (WJ-NT314 only), 4x Terminal
inputs, 4x Camera alarms, 4x Video loss alarms and Panasonic
alarm protocol can trigger actions including SD memory
recording/FTP image transfer, E-mail notification, Alarm indication,
Terminal output and Panasonic protocol output.
• Bi-directional audio (1CH)
• Built-in network interface (10Base-T / 100Base-TX)
• Multiscreen: Images from 16 cameras can be displayed in
4 separate Quad screens (JPEG only). 20 characters camera title is
available for each camera.
• Alarm e-mail notification
• Max. bit rate/client for MPEG-4 (64 / 128 / 256 / 512 / 1,024 / 1,536 /
2,048 / 3,072 / 4,096 / 6,144 kbps) combined with Total bit rate
control (64 / 128 / 256 / 512 / 1,024 / 2,048 / 4,096 / 8,192 / 16,384
kbps / Unlimited) allowing flexible network management.
• Supported protocol: TCP/IP, UDP/IP, HTTP, FTP, SMTP, DHCP,
DNS, DDNS, NTP, RTP and SNMP
• Multi-language capable by localization
• FTP client function enables periodic image data transfer or transfer
upon alarm.
Standard Accessories
• Operating Instructions .................. 1 pc.
• CD-ROM* ..................................... 1 pc.
• Power cord (NTSC model) ........... 1 pc.
• Power cord (PAL model) ............. 2 pcs.
The followings are for installation.
• AC adapter ................................... 1 pc.
• Code label .................................... 1 pc.
* The CD-ROM contains the operating
instructions (PDFs) and the setup tools
(Panasonic IP setup software, etc.).
Optional Accessories
EIA19 inch Rack Mount Bracket
EIA19 inch Rack Mount Bracket
WV-Q204/1S
WV-Q204/2S
(for mounting one WJ-NT314/NT304)
(for mounting two WJ-NT314/NT304)
Specifications
Sensitivity
Display Mode
Alarm Action
Alarm
Schedule
Alarm Source
Alarm Action
Network
Network Interface
Maximum Band Width
Total Bit Rate Control
Max. Bit Rate / Client (MPEG-4)
Audio Transmission Mode
Supported Protocol
FTP Client
No. of Simultaneous Users
SD Memory Card
(Option)
E-mail
User Registration
User/Host Level
Security Measures
External IF Alarm
Control
RS-485 Port
Safety/EMC WJ-NT314
General
Specifications Standard
WJ-NT304
Power Source and
Power Consumption
Ambient Operating Temperature
Ambient Operating Humidity
Dimensions
Weight (approx.)
* GOST: WJ-NT304 only
Appearance
307(12-1/16")
Video
Detection Channels
Analytic Detection Area Setup
(WJ-NT314
only)
Audio Input Connector
Audio Output Connector
Connector Terminal
10/100 Base-T Port
Signal Ground Terminal
RS-485 Port
Clamp
DC 12 V Input Jack
300(11-13/16")
Supported Browser
Operation Indicator
Status Indicators
Reset Button
Dip Switch
SD Memory Card Slot
SD Memory Card Error Indicator
Serial Port
Video Input Connectors
Video Output Connectors
7(1/4")
Unit Title
Camera Title
Clock Display
Alarm Control
Audio
GUI Language
Setup Menu Language
System Log
Supported OS
23(7/8") 128(5-1/16")
Display Mode
25(1") 9.5(3/8")
32(1-1/4")
(Mounting Pitch)
Browser
GUI
Audio Compression
Method
Camera Control
Rear View
3.6(1/8") 44(1-3/4")
Image Compression
Image Refresh Rate
Front View
220(8-11/16")
Audio /
Video
Format
Video Loop Through Output
Audio Input
Audio Output
Image Resolution
Part Names and Functions
NTSC
PAL
4x 1.0 V [p-p] / 75 Ω NTSC
4x 1.0 V [p-p] / 75 Ω PAL
composite video inputs (BNC) composite video inputs (BNC)
Multiplexed control data and cable Multiplexed control data and cable
compensation compatible: 1 ~ 4 CH compensation compatible: 1 ~ 4 CH
Active loop through outputs: 1 ~ 4 CH
1x –10 dBv, 10 KΩ, Unbalanced, RCA
1x –10 dBv, 600 Ω Unbalanced, RCA
JPEG: VGA (640 x 480) / QVGA (320 x 240),
MPEG-4: VGA (640 x 480) / QVGA (320 x 240)
MPEG-4: Image quality: 3 steps, Transmission type: UNICAST/MULTICAST
JPEG: Image quality: 10 steps, Transmission type: PULL/PUSH
0.1 ips ~ 30 ips
0.1 ips ~ 25 ips
(30 ips is performed with input from one (25 ips is performed with input from one
camera. Frame rate of JPEG display
camera. Frame rate of JPEG display
will be limited when displaying JPEG
will be limited when displaying JPEG
and MPEG-4 simultaneously)
and MPEG-4 simultaneously)
G.726 (ADPCM), 16/32 kbps Bi-directional
between PC and WJ-NT314. CH1 only.
Pan / Tilt / Zoom / Focus / Iris / Preset position (up to 256),
Auto mode, Setup menu. AUX, B/W ON/OFF/Auto, Click centering
Spot, Quad: Image from 16 cameras can be displayed in 4 different
Quad screens (JPEG only). 20 characters camera title available.
On the browser, Up to 20 characters
On the browser, Up to 20 characters
On the browser, Time: 12H/24H, Date: 5 formats
Reset
OFF / Mic input / Audio output / Interactive
English (Localization capable)
English (Localization capable)
Approx. 100 (Internal), Approx. 4,000 (SD memory) error logs
Microsoft® Windows Vista Home/Professional,
Microsoft® Windows® XP Home/Professional SP2
Windows® Internet Explorer® 7.0,
Microsoft® Internet Explorer® 6.0 SP2
2 channels at a time
3 intruder detection areas and 1 object abandonment/removal
detection area per program (Polygonal areas). Up to 8 detection
programs can be assigned across 4 camera channels each with
256 preset positions. 1 mask area per program.
Sensitivity: Auto, Depth correction setup: Auto/Manual
Program ID: 20 characters,
Tracking display: ON/OFF, Frame display: ON/OFF
Different preset positions can be called corresponding
to the 8 detection programs.
Individual schedule/program, 1 time zone per each day of the week
2x AVMD (WJ-NT314 only), 4x Terminal inputs, 4x Camera alarms,
4x Video loss alarms, Panasonic alarm protocol
SD memory recording/FTP image transfer, e-mail notification, Indication on
browser, Camera positioning, Terminal output, Panasonic protocol output
10 BASE-T / 100 BASE-TX, RJ-45 Connector
Total 32 Mbps
64 / 128 / 256 / 512 / 1,024 / 2,048 / 4,096 / 8,192 / 16,384 kbps / Unlimited
64 / 128 / 256 / 512 / 1,024 / 1,536 / 2,048 / 3,072 / 4,096 / 6,144 kbps
OFF / Mic input / Audio output / Interactive (Half duplex)
TCP/IP, UDP/IP, HTTP, RTP, FTP, SMTP, DHCP, DNS, DDNS, NTP, SNMP
Periodic image transfer: Interval 5 sec ~ 24 H,
Alarm image transfer: 0.1 ~ 1.0 ips, 1 ~ 5,000 images
Up to 8 users/channel, Up to 16 users/unit (Depends on network conditions)
Alarm REC / Backup upon network failure. Compatible SD card:
Panasonic 64 MB, 128 MB, 256 MB, 512 MB, 1 GB, 2 GB model
Upon Alarm or Warning, Up to 4 addresses
Up to 16 users
3 Levels: Administrator, Camera control, Live only
User authentication (ID 32 digit, PW 32 digit),
Host authentication (IP address)
4x Input (Make contact),
4x Output (Open collector, Latch / Pulse, N.O. / N.C.)
1x AUX output, 1x Time adjustment input
1x RS-485 (RJ-11), 4 wire, Full/Half duplex,
Supports UDP-Serial conversion
UL (UL60065), FCC (Part15 ClassA), CE (EN60065, EN55022 ClassB,
C-UL (CAN/CSA C22.2 No.60065), EN55024)
DOC (ICES003 ClassA)
UL (6500), FCC (Part15 ClassA), CE (EN60065, EN55022 ClassB,
C-UL (E60065),
EN55024),
DOC (ICES003 ClassA)
GOST (GOST R 51558)*
12 V DC 1.0 A (220 ~ 240 V AC
12 V DC 1.0 A (120 V AC
60 Hz adapter provided)
50 Hz adapter provided)
–10 °C ~ +50 °C (14 °F ~ 122 °F)
90 % or less (without condensation)
210 mm x 44 mm x 307 mm (8-1/4" x 1-3/4" x 12-1/16")
2.0 kg (4.4 lbs.)
47(1-7/8")
TV System
Audio /
Video Inputs
Video IF
480(18-7/8")
465(18-5/16")(Mounting Pitch)
210(8-1/4")
160(6-5/16")
Unit: mm (inches)
Trademarks and registered trademarks
– Microsoft, and Windows are registered trademarks of Microsoft Corporation in the U.S. and other countries.
– "Super Dynamic", "SDII", "SDIII" and "i-Pro" logos are trademarks or registered trademarks of
Panasonic Corporation.
Important
– Safety Precaution: carefully read the operating instructions and installation manual before using this product.
– Panasonic can not be responsible for network performance and/or other manufacturer products that
reside on the network.
• All TV pictures are simulated.
• Weights and dimensions are approximate.
• Specifications are subject to change without notice.
• These products may be subject to export control regulations.
• All product pictures are NTSC models.
DISTRIBUTED BY:
http://panasonic.net/security/
Printed in Japan (2A-015BA)