ENCORE ENPS-MF1 print server

ENPS-MF1
1 Port USB Multifunctional Print Server
Product Descriptions:
A.
Interface:
ƒ USB: One USB 2.0 High speed compliant port, supporting 1.5 Mbps (low
speed), 12 Mbps (full speed) and 480 Mbps (high speed) data transmission rate.
This port automatically detects the make and model of the printer attached to
it.
ƒ
LAN: Compliant with IEEE 802.3 / 802.2u standard, 10/100 Mbps auto
sensing, RJ 45 (UTP) connector.
* This product does not support use of USB hubs for daisy-chained connection, USB-to-Parallel
connectors, or USB cable extenders.
1
B.
Key Software Specifications:
Setup CD
Yes (Windows Setup CD-ROM)
Network Operating System Support
Windows® 2000/XP and Windows Vista™
Network Protocol Support*
UDP TCP/IP
DHCP (client) Support
Yes
Management
1. Web interface
2. Windows-based Setup Program
3. Configuration Utility
Firmware Upgradeable
1. Web interface
2. TFTP
MFP Support
Printing, Scan, Fax and Card reader
C. Hardware Specifications:
CPU
Embedded high-performance RISC-cored SoC processor
Flash
1MB
System Memory
2 MB SDRAM
USB Port
USB 2.0 standard compliant host controller
LAN Port
10/100 Mbps, auto-sensing
Reset Button
Yes (Reset / Load Factory Defaults)
Power Supply
100-240V input / 3.3V, 2A Output
Dimension
74 (Length) x 63 (Width) x 30 (Height) mm
Weight
57 g (device only)
EMI Certifications
CE / FCC Class B
Temperature
Operating 0 ~ 50°F; Storage -5 ~ 65°F
Humidity
Operating 0 ~ 70%; Storage 0 ~ 80%
The specification is subject to change without prior notice.
2