Traceability
Baracoda TagRunners
Contact RFID Reader / Encoder
RFID HF 13.56 MHz technology
Contact reading
Various protocols supported
Reading / Encoding function
Timestamp
Batch mode available
To be connected on a wide range of mobile
terminals : PDAs / Mobile phones / Rugged PDAs
Pocket PCs / Smartphones
Bluetooth class 1 (up to 100 m )
Withstands several drops onto concrete due to its
protective boot
Traceability in Medical Environments
Asset Tracking : barrels, tanks, vegetable,
outdoor facilities, ...
www.baracoda.com
TagRunners* Specifications
Standards
Main Features
Ideal for asset tracking applications
Bluetooth ® 2.0 + EDR
The TagRunners is a RFID HF (High Frequency) contact reader/encoder
dedicated to mobile environments where barcode reading is not efficient for some
applications in asset tracking, traceability in medical environments.
Class 1 (100 m)
SPP profile
User Interface
2 tricolor LEDs (green, orange, red)
Rugged reader
Buzzer 85 (dBA)
TagRunners, with its 3 mm of plastic casing protected by an additional layer of
elastomer and the optional protective boot, is particularly adapted to harsh
environments and remain fully functional even after multiple drops on concrete.
Using Modes
Real Time
with or without "No data Loss" mode
Batch
20,000 Tags capacity
Flash Memory
1 MByte
Real time clock to timestamp captured data can be activated
Durable battery
The TagRunners can read up to 15,000 tags during a continuous use
Data Capture
Reading Technology
RFID HF 13.56 MHz
Reading Distance
Contact
Battery monitoring: Check in real time the battery status of the reader on
your mobile device
Reading Modes (for Tag ID)
Trigger
Autoscan
Smart Autoscan
«No Data Loss» Mode and Auto-Reconnection
Possibility to switch ON beam via Bluetooth
Beam always on
Save power consumption
No duplicate scan available function
When TagRunners is connected to a host, read data are transmitted in real
time to this host. Data are stored in internal memory until they are acknowledged
by the application.
If you read Tags out of the radio range, data will be stored in memory and
and automatically downloaded when getting back into range.
Reading Capacities
Supported protocols
ISO/IEC 14443-A (NXP Mifare 'Classic' 1K / 4K, Ultra Light, etc)
ISO/IEC 14443-B (ST SR, etc)
Timestamp
Associate a date and a time to the reading of the tag
ISO/IEC 15693 (NXP ICODE-SLI, TI Tag-it, ST LRI64, ST LRI 2K)
ISO/IEC 15693 (KSW Variosens®)
Batch mode
NXP ICODE-1
This mode enables the TagRunners to store up to 20,000 Tags IDs with
timestamp
Inside Contactless PicoTAG
ASK CTS256B/CTS512B
Intuitive user interface
NFC
Energy / Power
Battery
1 X 2200 mAh Li-ion rechargeable
Autonomy
up to 15,000 Tags ID
Charging Time
4 hours for 100% charge
2.5 hours for 80% charge
Compatible platforms
Dimensions
Length
123 mm
(4,84 in)
Width
52 mm
(2,05 in)
Height
33 mm
130 g
Weight
sSame button to switch on, connect and read RFID tags.
s-ULTICOLORLEDFORCONNECTIONANDBATTERYStatus.
s3OUNDBEEPS for successful scanning (loud volume option available for noisy
environments).
Baracoda provides you with an easy-to-use middleware (BaracodaManager)
a n d S D K t o e a s e t h e i n t e g r a t i o n o n t h e f o l l o w i n g m o b i l e platforms:
PC (including Windows 7) ; PPC 2002/2003; WM5 / WM6; Windows phone; CE.NET;
Symbian series 9 (mobile phones) and Java phones (BlackBerry and JRS82)
(1,3 in)
(4,5 oz)
Environment
Operating temperature
0°C - +40°C (32°F - 104°F)
Content
Storage temperature
-10°C - +60°C (14°F - 140°F)
Humidit
5 - 95% (Non condensing)
Drop
Withstands several drops onto concrete due to its protective boot
Ambient light
Full darkness to sunlight
s2EADERWITHREchargeable battery
sPDA stylus
s#HARGERV, 500mA)
sCD with all the documentation and software needed
* Springcard Inside
To be used with TagRunners
AND protective boot
Protective Boot
Key retractable reel
Holster
Cradle
Car charger
Neck lanyard
v1.5 February 2010
Available accessories