Trapeze Networks LA-200-EU network management device

Asset Tag AT-320
DATA SHEET
Asset Tag AT-320
Lightweight active RFID tag for Wi-Fi based asset tracking solutions and Real-Time Location Services (RTLS)
The AT-320 asset tag is a small, lightweight,
power-efficient Wi-Fi enabled active RFID tag
that can be attached to high-value assets or
carried by people for real-time location tracking
in Wi-Fi environments. The AT-320 asset tag is
a key component of Trapeze Real-Time Location
services (RTLS) solution which includes Active
Asset™ and the LA-200 Location Appliance™.
Together, these components make up the most
accurate and precise Wi-Fi based location tracking on the market today.
Active Asset™
Active Asset is a real-time asset tracking and
management application for asset monitoring,
mapping, lifecycle management and reporting.
LA-200 Location Appliance™
The LA-200 is the industry’s first and only infrastructure-agnostic wireless location appliance.
Key Features and Benefits
Compact Size – The small size (2.5” x 1.6” x
0.8”, 65mm x 41mm x 18mm) and light weight
of the AT-320 tag allows it to be affixed to a
variety of asset types, including medical devices,
manufacturing equipment, IT equipment, containers, vehicles and cards. Because of its small
size and light weight form factor, it can also be
easily worn or carried by people.
Long Battery Life – AT-320 uses a single,
commercially available CR123A battery. An
advanced power management design ensures
that the tag maximizes battery life under a
variety of transmission and usage scenarios. The
tag transmits low battery alerts to enable timely
and efficient replacement.
Alert Button – Pressing the AT-320 alert button
sends configurable alerts to users of the asset
tracking solution such as Active Asset.
Motion Sensor – The AT-320’s built-in motion
sensor enables the tags to send motion status to
the users of the tracking system.
Temperature Sensor – Sensors can monitor
goods within a fraction of a degree to identify
improperly stored items before damage occurs.
Multiple Mounting Options – The AT-320 can
be affixed to assets using a variety of mounting
options including adhesive tape, Velcro, tie wrap
or other custom mounting devices.
Wearable Form Factor – The AT-320 is small and
light enough to be worn on an arm/wrist band.
Detachment Sensor – To prevent people tampering with the AT-320, alerts can be triggered
if the tag is detached from its mounting plate.
Ruggedized Packaging – The AT-320 is designed
to handle both indoor and outdoor environments and is dust and weather (heat, cold,
humidity) resistant.
AT-320 Asset Tag (continued)
Best-In-Class Wi-Fi Tag Functionality
Full Over-the-Air Configuration Higheset Tracking Accuracy
AT-320 asset tags are fully compliant with
IEEE 802.11 wireless standards, built to support best-practice RFID and wireless network
management policies recommended by the
leading enterprise wireless LAN (WLAN) and
RFID infrastructure providers. AT-320s are
easily deployable in enterprise WLAN and RFID
environments from any vendor.
All the attributes of the AT-320 are user
configurable over-the-air, including network
connectivity settings, reporting intervals, and
802.11 scanning properties. Over-the-air
firmware updates ensure that the AT-320
can be enhanced with additional capabilities
while deployed in production environments.
The intuitive tag-to-asset interface allows
authorized users to associate tags with important asset information such as manufacturer,
department owner, serial number, and other
asset specific data.
AT-320 asset tags combined with the Trapeze
RTLS solution deliver accurate and reliable location tracking (within 3 meters) by
leveraging existing WLAN infrastructure.
Organizations using the AT-320 reduce their
TCO without having to deploy expensive proprietary non 802.11 signposts and chokepoints.
Breakthrough Wi-Fi Tag Battery Life
The AT-320 utilizes an advanced active/passive
RFID System-on-Chip (SoC) designed specifically to support ultra-low power operation
of Wi-Fi – based RFID tags. At a default
reporting interval the battery life of the tag
is approximately 2 years. Configuring the tag
with longer reporting intervals can extend the
battery life to over 5 years.
Certified for Global Use
The AT-320 is currently certified for use in the
United States, Canada and Europe.
Ordering Information
Ordering Information
AT-320
•
•
LA-200-xx
•
LA-200-xx-PAK
•
2
Active 802.11b/g Asset Tag for Wi-Fi Based Asset Tracking Solutions
xx = NA - North America, EU - Europe, UK - United Kingdom, JP - Japan, AU - Australia
Location Appliance with 2 x 10/100/1000Base-T ports, for Real-Time Location Services (RTLS)
Asset Tracking Starter Pack Bundle: includes one LA-200-xx Location Appliance, 25 AT-320 Asset Tags, Active Asset application with 25 asset tracking licenses
© 2009 Trapeze Networks, Inc.
www.trapezenetworks.com
DS_AT320_022309