takeMS TMS2GB364D08x-169xx
Description
These memory devices are JEDEC standard unbuffered DIMMs, based on CMOS DDR3 SDRAM technology using DDR3 SDRAMs in
FBGA packages on a 240-pin glass epoxy substrate. The memory array is designed with Double Data Rate (DDR3) Synchronous
DRAMs for unbuffered applications.
Fly-by command/address/control bus architecture of DDR3 SDRAMs allows for concurrent operation, thereby providing high,
effective bandwidth. This main benefit of DDR3 is made possible by its 8 bit prefetch buffer.
DDR3 memory ensures a power consumption reduction of 30% compared to DDR2 modules due to DDR3's 1.5 V supply voltage,
also defined as "Enhanced low power features".
These modules feature Serial Presence Detect (SPD) based on a serial EEPROM device. DDR3 SPD programming is based on a
speed bin. DDR3 latencies are numerically higher because the clock cycles by which they are measured are shorter. Absolute
latency (ns) is generally equal to or faster than DDR2.
Order-No.: TMS2GB364D08x-169xx
Technical details
-
2048 MB longdimm module
-
128Mx8 IC organisation
-
x64 module organisation
-
1600 MHz / PC3 12800
-
Single sided / 8 ICs
-
CAS Latency 9 at max. Memclock
-
Basic settings:
DDR3 1333 MHz 9-9-9-24 1.5V (autodetect)
-
XMP settings:
DDR3 1600 MHz 9-9-9-24 1.65V
For pin configuration please check www.takems.com/support/index.php
If you have any questions regarding our products you can contact us via email:
info@takems.com
V3/03/10