Trapeze Networks MP-632-01 WLAN access point

Mobility Point® MP-632
DATA SHEET
Mobility Point MP-632
802.11n dual-radio 3x3 MIMO outdoor access point designed for high-performance client access,
long distance bridging, and mesh
services.
The Mobility Point family
provides access point,
bridging and wireless mesh
services for indoor and
outdoor deployments of
Smart Mobile wireless LANs.
Mobility Point MP-632
The Trapeze Networks outdoor MP-632 is a high
speed dual radio 802.11n (3 x 3) Multiple Input
/ Multiple Output (MIMO), outdoor access point.
It has maximum aggregate data rates of up to
600 Mbps and features 10/100/1000 Gigabit
Ethernet connectivity and a dedicated 48VDC
power port.
The MP-632 comes in a ruggedized, weatherproof enclosure suitable for extreme outdoor
environments. It complies with NEMA4X and
IP67 standards for corrosion resistance and features built-in lightning protection for antenna
ports, as well as surge protection for Ethernet
and power ports. It also has automatic thermal management inside the access point and
includes RSSI meter functions on LEDs for easy
antenna alignment in the field.
The MP-632 complements other Trapeze
Networks’ indoor and outdoor access points by
delivering the same rich enterprise class feature
set, with the same operations model, outdoors.
With Smart Mobile technology, WLAN coverage
and secure mobility can now be extended across
the campus, enabling wireless users to stay connected as they roam from building to building.
In addition to traditional access point functionality, the MP-632 can also serve as high speed
Mesh AP, Mesh Portal, or WDS Bridge to extend
the reach of enterprise WLANs. Furthermore,
the MP-632 can support such functionality in
either point-to-point or point-to-multipoint
topologies, allowing maximum flexibility within
a mesh or bridged environment. In mesh portal
mode, the MP-632 acts as the gateway node to
the wired network, advertises services to mesh
access point nodes, and enforces firewall, access
and quality of service (QoS) policy, simultaneously performing broadcast suppression—all of
which serve to optimize RF spectrum utilization
in the mesh.
The MP-632 can be configured with one radio
for client services and the other for wireless
backhaul or mesh service, or in any hybrid combination desired in either the 2.4 GHz or 5 GHz
bands. A variety of external antenna options
ensure that the RF coverage area can be tailored
to meet access requirements including long
distances.
Smart Mobile intelligent switching is supported
in all mesh modes, enabling each mesh node to
provide the shortest, least congested path to the
destination over encrypted secure mesh links.
The MP-632 can also be used in a dedicated
bridging mode, to provide seamless connectivity
between buildings without the expense of laying new cable.
Mobility Point MP-632 (continued)
The MP-632 is simple to deploy and easy to
manage and supports any kind of service data, voice, video and location - over Wi-Fi. It automatically calculates the data integrity
and RF signal strength of the wireless channel
and continually tunes optimal RF channel and
transmit power, while enforcing the prioritization of delay-sensitive voice and other critical
applications. Wi-Fi Multimedia (WMM) or
SpectraLink™ Voice Priority (SVP) can be configured to ensure optimal QoS for voice traffic.
Policies allow per user, protocol or class-ofservice (CoS) mapping.
The MP-632 plays a key role in rogue and
intrusion detection as well as denial-of-service
(DoS) attack detection. ActiveScan allows
MPs to fulfill a dual role. They scan all 802.11
bands, channels and VLANs while simultaneously providing wireless connectivity to mobile
clients. SentryScan allows MPs or individual
MP radios to act as dedicated sentries, providing nonstop scanning.
The MP-632 uses the same Mobility System
Software™ as all other Trapeze Mobility Points.
For more information about the security and
networking capabilities of the MP-632, please
read the Mobility System Software datasheet.
Key Features
Radios
Dual radios
• 802.11a/n (5GHz) and 802.11b/g/n (2.4GHz) concurrent operation
Scalability
Clients
Encryption
• Supports up to 500 simultaneous clients
• Dedicated hardware-based line-rate encryption for certified operation of WPA (TKIP), WPA2, (AES), 40-bit WEP, 128-bit WEP, and Dynamic WEP with per session rotating keys
Bridging & Mesh
Wireless Bridging
Wireless Backhaul
Enterprise Ethernet Mesh Service
•
•
•
•
Point-to-point (P-P) and Point-to-Multipoint (P-MP) operations
Point-to-point (P-P) and Point-to-Multipoint (P-MP) operations
Mesh portal operation
Mesh access point operation
•
•
•
•
•
•
3 x 3 MIMO (3 Radio Transmit and 3 Radio Receive chains) with two spatial streams
20 MHz and 40 MHz channels
PHY data rates up to 300 Mbps per radio. 600 Mbps aggregate total
Adaptive Frame Aggregation [L2 (MPDU-Aggregation) and L3 (MSDU Aggregation)]
Maximal Ratio Combining (MRC)
Cyclic Delay Diversity (CDD)
Physical Security
WIDS/WIPS
•
•
•
•
•
•
Safe tamper-proof design with completely sealed enclosure
No data, security credentials or encryption keys stored locally
No console port; no local access possible
If stolen, no configuration information or data goes with it
Stolen AP can be “blacklisted”
Either radio can be configured independently for ActiveScan or SentryScan
Installation Mounting
Powering
RF Planning
•
•
•
•
Wall/Pole mount bracket attaches to triangular swivel collar on AP for flexible positioning
Choice of two environmentally hardened outdoor power supplies
Dedicated 48VDC power port on ruggedized 8-pin (male) DIN connector
Outage resiliency planning for RF Auto-Tuning using RingMaster®
802.11n
Security
2
Specifications
Hardware Specifications
Dimensions (HxWxD)
Weight
Interfaces
Environmental
Power
Status Indicators
•
•
•
•
•
•
•
•
•
•
•
•
11.18 in. (284 mm) x 11.18 in. (284mm) x 5.53 in. (140.5mm)
9.8 lbs (4.44 kg) not including mounting brackets and antennas
10/100/1000 Gigabit Ethernet port for unshielded twisted pair (UTP) connectivity on ruggedized 8-pin DIN connector Six external, N-type female jacks for external 802.11 a (5GHz) and 802.11 b/g (2.4 GHz) antennas (ordered separately)
Support for multiple antenna types allows flexibility in placement and orientation to suit application specific needs
Operating temperature: -40°C to 55°C
Storage temperature: -40°C to 70°C
Humidity: 10% - 95% (non-condensing)
Up to 120mph sustained wind load
-48 VDC, 1.2 Amps, 30 watts peak during dual-radio operation
3 LEDs: Power, Radio 1, and Radio 2, indicate activity and various states
LEDs also indicate measured RSSI during antenna alignment
•
•
•
•
•
2.4 GHz to 2.484 GHz and 5.15 GHz to 5.85 GHz
rthogonal Frequency Division Multiplexing (OFDM)
O
Based on regulatory domain, up to 16 dBm in 2.4 GHz, up to 15 dBm in 5 GHz
11n rates: Modulation Coding Scheme MCS 0 – MCS 15 (6.5Mbps – 300Mbps)
Legacy Rates: 54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, Mbps and 6 Mbps with automatic rate fallback
•
•
•
•
5.15 GHz to 5.85 GHz
Orthogonal Frequency Division Multiplexing (OFDM)
Based on regulatory domain, up to 15 dBm
54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 9 Mbps and 6 Mbps with automatic fallback
•
•
•
•
2.4 GHz to 2.484 GHzModulation
Orthogonal Frequency Division Multiplexing (OFDM)
Based on regulatory domain, up to 16 dBm
54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 9 Mbps and 6 Mbps with automatic fallback
•
•
•
•
2.4 GHz to 2.484 GHz
Direct-Sequence-Spread-Spectrum (DSSS)
Based on regulatory domain, up to 17 dBm
11 Mbps, 5.5 Mbps, 2 Mbps, and 1 Mbps with automatic fallback
802.11n Radio Specifications
Operating Frequency
Modulation
Transmit Power
Configurable Association Rates
802.11a Radio Specifications
Operating Frequency
Modulation
Transmit Power
Configurable Association Rates 802.11g Radio Specifications
Operating Frequency
Modulation
Transmit Power
Configurable Association Rates
802.11b Radio Specifications
Operating Frequency
Modulation
Transmit Power
Configurable Association Rates
Radio Approvals
Operating Channels
• Based on regulatory domain
5GHz Radio Approvals
• USA: 47CFR(FCC) Part 15.407
• EU and EFTA: ETSI EN301 893 v1.5.1 DFS2 and DFS3
• Canada: IC RSS-210, Issue 7, RSS-139-1
2.4GHz Radio Approvals
• USA: 47CFR (FCC) Part 15.247
• Canada: IC RSS-210, Issue 7, RSS-139-1
• EU: ETSI EN300 328-2, EN301 489-1 and -17
3
Compliance Safety and Electromagnetic Compliance
Environmental Compliance
Standard Compliance
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
USA: UL 60950-1, current edition, plus all country deviations
Canada: ICES 003, Class B, UL to CSA C22.2 No. 60950-1
EU and EFTA: ETSI EN55022:1998 (Class B) and ETSI EN55024, EMC Directive 2004/108/EC Australia/New Zealand: AS/NZS CISPR 22, AS/NZS 4268, Class B
WEEE: EU DIRECTIVE 2002/96/EC
RoHS: DIRECTIVE 2003/95, 2006/122/EC, China-RoHS
IEC: IP67
NEMA: Type 4x
Primary and Secondary lightning protection as per UL497 / UL497A and ITU K44 / K45 for 48VDC / Ethernet port only
802.3i 10BASE-T Ethernet
802.3u 100BASE-TX Fasy Ethernet
802.3ab 1000BASE-TX Gigabit Ethernet
802.1X Network Access Control and Mutual Authentication
802.11 a, 802.11 b, 802.11 g, 802.11 n Wireless Ethernet
802.11 e quality of service (QoS)(WMM), call admission control (TSPEC), unscheduled power save delivery (U-APSD)
802.11 i Fast Roaming (PMK Cache), encryption (AES/CCMP and TKIP)
Wi-Fi Alliance Protected Access 1.0 (WPA) and 2.0 (WPA2)
Wi-Fi Alliance Multimedia (WMM) IETF CAPWAP WG Taxonomy and Architecture compatibility
Ordering Information
Ordering Information
MP-632-01
MP-632-02
• Outdoor 802.11n AP with dual radios: 802.11an and 802.11gn, single Gigabit Ethernet data port, weather-sealing caps for antenna connectors, brackets for wall or pole mount and environmentally hardened outdoor power supply (100-240 VAC 50-60Hz input) bundle. Includes AC input cable with stripped ends for either direct wiring or connection to a three-prong plug (plug not included).
• Outdoor 802.11n AP with dual radios: 802.11an and 802.11gn, single Gigabit Ethernet data port, weather-sealing caps for antenna connectors, brackets for wall or pole mount and environmentally hardened outdoor power supply (100-240 VAC 50-60Hz input) bundle. Includes conduit coupling (Heyco 1/2” ID conduit fitting HFC-Z 1/2) for direct connection to 1/2” inside diameter steel conduit.
Optional Accessories
ANT-7360A-OUT
•
ANT-74520-OUT
•
ANT-77555-OUT
•
ANT-5007-OUT
•
360° Outdoor dual-band 802.11n omni-directional antenna for 802.11n APs. Has 6 (8dB) gain in the 2.4GHz (5GHz) band; includes mast mounting kit and one 36” Type N Male to Type N Male low loss cable. Requires one unit for each coaxial connector on the AP.
Indoor/outdoor dual-band three-element 802.11n directional panel antenna for 802.11n APs. Has 10.9dB (13.5dB) gain in the 2.4GHz (5GHz) band; has 45 degree (20 degree) horizontal beamwidth in the 2.4GHz (5GHz) band. Includes articulating wall/mast mounting kit and three integrated 36” cables with adapters for direct connection to either the MP-632 or the MP-82. Requires only one unit per radio. For outdoor use, three lightning suppression kits are recommended with this antenna (such as either the ANT-LGTNG-OUT or the ANT-PROT-OUT).
Indoor/outdoor dual-band three-element 802.11n directional panel antenna for 802.11n APs. Has 8dB (10.7dB) gain in the 2.4GHz (5GHz) band; has 75 degree (55 degree) horizontal beamwidth in the 2.4GHz (5GHz) band. Includes articulating wall/mast mounting kit and three integrated 36” cables with adapters for direct connection to either the MP-632 or the MP-82. Requires only one unit per radio. For outdoor use, three lightning suppression kits are recommended with this antenna (such as either the ANT-LGTNG-OUT
or the ANT-PROT-OUT).
Outdoor two-element cross-polarized 802.11n high-gain directional panel antenna for use in the 5GHz band with 802.11n APs. Has 23.5dB gain, 7 degree vertical beamwidth, and 7 degree horizontal beamwidth. Includes articulating wall/mast mounting kit and two 36” Type N Male to Type N Male low loss cables. Requires only one unit per radio. For outdoor use, two lightning suppression kits are recommended with this antenna (such as either the ANT-LGTNG-OUT or the ANT-PROT-OUT).
ANT-PROT-OUT
• N-Male to N-Female Lightning Protector for direct mount onto MP-632. Requires one unit for each coaxial cable on the antenna.
4
© 2009 Trapeze Networks, Inc.
www.trapezenetworks.com
DS_MP632_092409