HP ProLiant 590162-421 server

QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Overview
The HP ProLiant DL160 G6 server is a high performance, low cost, ultra-dense, dual processor capable, 1U rack server for memory
intense High Performance Computing (HPC) environments, Web 2.0, hosting, and general large memory footprint server
deployments.
Hot Plug SAS/SATA and Non-Hot Plug SATA Models
Front View:
1.
Access panel
2.
System fans
3.
Two USB ports
4.
Power on/off & system LEDs
5.
Optional 3rd and 4th 3.5" Non-Hot plug SATA or hot plug
SAS/SATA hard drive bays
6.
Optional DVD-RW or DVD-ROM drive
Rear View:
1.
Power Supply Cable Socket
2.
Video Port
3.
Serial Port
4.
Rear USB ports (2)
5.
One GbE LAN ports for shared NIC 2 (RJ-45)
7.
Standard 1st and 2nd 3.5" Non-Hot plug SATA or hot plug
SAS/SATA hard drive bays (Small Form Factor drive cage
not shown here. See the Storage Section for orientation of
eight small form factor drive option)
7.
8.
9.
10.
8.
Eighteen DIMM slots : DDR3 Registered (RDIMM) or
Unbuffered (UDIMM) memory
Expansion Slots:
Slot 1:Full-length/Full height x16 PCI-Express Gen2 slot, or
Slot 1: Half-length/Full height x16 PCI-Express Gen2 slot
and
Slot 2: Low Profile x4 PCI-Express Gen2 slot (accepts x8
cards, internal only)
Six Core Intel® Xeon® 5600 ,Quad-Core Intel® Xeon®
5600 & Quad-Core Intel® Xeon® 5500 series processors
(supports up to two)
Power supply (500 Watts - standard, other PS options
available)
9.
10.
11.
DA - 13247
6.
Optional LO100i 10/100 Mbps LAN port for dedicated
IPMI management (RJ-45)
Low-Profile slot cover (not used in this model)
Full-height PCI-Express x16
UID - Rear Unit Identification LED
One GbE LAN ports for NIC 1 (RJ-45)
Worldwide — Version 51 — November 14, 2011
Page 1
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Overview
What's New
Support for SAS Hot Plug 2.5" Enterprise Mainstream Hard Drives
DA - 13247
Worldwide — Version 51 — November 14, 2011
Page 2
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Standard Features
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory
Integrated Models" section.
Processor
Six -Core Processors
One of the following
Intel® Xeon® X5690 (3.46GHz/6-core/12MB/130W, DDR3-1333, HT, Turbo1/1/1/1/1/2/2)
depending on Model
Processor
NOTE: Available through Configure To Order only. See Factory Integration Models section for more
details.
Intel® Xeon® X5680 (3.33GHz/6-core/12MB/130W, DDR3-1333, HT, Turbo 1/1/2/2/3/) Processor
Intel® Xeon® X5675 (3.06GHz/6-core/12MB/95W, DDR3-1333, HT, Turbo 2/2/2/2/3/3) Processor
NOTE: Available through Configure To Order only. See Factory Integration Models section for more
details.
Intel® Xeon® X5670 (2.93GHz/6-core/12MB/95W, DDR3-1333, HT, Turbo 2/2/2/2/3/3) Processor
Intel® Xeon® X5660 (2.80GHz/6-core/12MB/95W, DDR3-1333, HT, Turbo 2/2/2/2/3/3) Processor
NOTE: Available through Configure To Order only. See Factory Integration Models section for more
details.
Intel® Xeon® X5650 (2.66GHz/6-core/12MB/95W, DDR3-1333, HT, Turbo 2/2/2/2/3/3) Processor
Intel® Xeon® E5649 (2.53GHz/6-core/12MB/80W, DDR3-1333, HT, Turbo 1/1/1/1/2/2) Processor
NOTE: Available through Configure To Order only. See Factory Integration Models section for more
details.
Intel® Xeon® E5645 (2.40GHz/6-core/12MB/80W, DDR3-1333, HT, Turbo 1/1/1/1/2/2) Processor
NOTE: Available through Configure To Order only. See Factory Integration Models section for more
details.
Intel® Xeon® L5640 (2.26GHz/6-core/12MB/60W, DDR3-1333, HT, Turbo 2/2/3/3/4/4) Processor
NOTE: Available through Configure To Order only. See Factory Integration Models section for more
details.
Quad -Core Processors
HP DL160 G6 Intel® Xeon® X5687 (3.60GHz/4-core/12MB/130W, DDR3-1333, HT, Turbo
NA/NA/1/1/2/2) Processor
NOTE: Available through Configure To Order only. See Factory Integration Models section for more
details.
HP DL160 G6 Intel® Xeon® X5677 (3.46GHz/4-core/12MB/130W, DDR3-1333, HT, Turbo 2/2/3/3)
Processor
HP DL160 G6 Intel® Xeon® X5672 (3.20GHz/4-core/12MB/95W, DDR3-1333, HT, Turbo
NA/NA/2/2/3/3) Processor
NOTE: Available through Configure To Order only. See Factory Integration Models section for more
details.
Intel® Xeon® Processor X5570 (2.93GHz/4-core/8MB/95W, DDR3-1333, HT, Turbo 2/2/3/3)
Processor
Intel® Xeon® X5560 (2.80GHz/4-core/8MB/95W, DDR3-1333, HT, Turbo 2/2/3/3) Processor
Intel® Xeon® X5550 (2.66GHz/4-core/8MB/95W, DDR3-1333, HT, Turbo 2/2/3/3) Processor
Intel® Xeon® E5640 (2.66GHz/4-core/12MB/80W, DDR3-1066, HT, Turbo 1/1/2/2) Processor
Intel® Xeon® E5630 (2.53GHz/4-core/12MB/80W, DDR3-1066, HT, Turbo 1/1/2/2) Processor
Intel® Xeon® E5620 (2.40GHz/4-core/12MB/80W, DDR3-1066, HT, Turbo 1/1/2/2)
DA - 13247
Worldwide — Version 51 — November 14, 2011
Page 3
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Standard Features
Intel® Xeon® E5607 (2.26GHz/4-core/8MB/80W, DDR3-1066) Processor
NOTE: Available through Configure To Order only. See Factory Integration Models section for more
details.
Intel® Xeon® E5606 (2.13GHz/4-core/8MB/80W, DDR3-1066) Processor
Intel® Xeon® E5603 (1.60GHz/4-core/4MB/80W, DDR3-1066) Processor
NOTE: Available through Configure To Order only. See Factory Integration Models section for more
details.
Intel® Xeon® E5540 (2.53GHz/4-core/8MB/80W, DDR3-1066, HT, Turbo 1/1/2/2) Processor
Intel® Xeon® E5530 (2.40GHz/4-core/8MB/80W, DDR3-1066, HT, Turbo 1/1/2/2) Processor
Intel® Xeon® E5520 (2.26GHz/4-core/8MB/80W, DDR3-1066, HT, Turbo 1/1/2/2) Processor
Intel® Xeon® L5630 (2.13GHz/4-core/12MB/40W, DDR3-1066, HT, Turbo 1/1/2/2/) Processor
Intel® Xeon® L5520 (2.26GHz/4-core/8MB/60W, DDR3-1066, HT, Turbo 1/1/2/2) Processor
Intel® Xeon® E5506 (2.13GHz/4-core/4MB/80W, DDR3-800) Processor
Intel® Xeon® E5504 (2.00GHz/4-core/4MB/80W, DDR3-800) Processor
Dual Core Processors
Intel® Xeon® E5503 (2.0GHz/2-core/4MB/80W, DDR3-800) Processor
NOTE: HT indicates that the processor model supports Intel® Hyper-Threading Technology.
NOTE: Turbo indicates the maximum potential frequency increment when using Intel® Turbo Boost
Technology, with 4, 3, 2, and 1 cores active.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed may
depend on the quantity and type of DIMMs installed.
NOTE: For the Intel 5000 Series, the letter preceding the model number indicates the
performance/wattage of the processor. "X" denotes High Performance/Wattage; "E" denotes Enterprise
Performance/Wattage (Mainstream); and "L" denotes Lower Wattage.
Cache Memory
One of the following
depending on Model
12 MB Level 3 cache
Chipset
Intel® 5520 Chipset
Upgradeability
Upgradeable to two processors
Memory Protection
Advanced memory protection
Mirroring Mode
Lockstep Mode
4MB Level 3 cache
DA - 13247
Worldwide — Version 51 — November 14, 2011
Page 4
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Standard Features
Memory
Type
DDR3 Registered (RDIMM) or Unbuffered (UDIMM)
Standard (Entry Models) 4 GB (1 x 4 GB) RDIMMs
Standard (Base Models)
8 GB (2 x 4 GB) RDIMMs
Standard (Performance
12 GB (3 x 4 GB) RDIMMs
Models)
Maximum (RDIMM)
288 GB (18 x 16 GB)
Maximum (UDIMM)
48 GB (12 x 4 GB)
NOTE: Depending on the memory configuration and processor model, the memory speed may run at
1333MHz, 1066MHz, or 800MHz. Please see the Online Memory Configuration Tool at:
www.hp.com/go/ddr3memory-configurator.
Network Controller
HP NC362i Integrated Dual Port Gigabit Server Adapter
Expansion Slots #
1
2***
Storage Controller
Technology
Bus Width
Connector
Width*
Width
x16
Bus Number*
Form Factor
Number Device No.**
No.
Notes
PCI-Express
x16
1
0
Full length,
3.3 volts
2.0
full height
PCI-Express
x4
x8
6
3
Low Profile,
3.3 volts
2.0
Internal Only
* Default bus assignment. Inserting cards with PCI bridges may alter the actual bus assignment number.
** Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest Device ID
by bus (starting with the lowest bus).
***In order to access expansion slot #2, the low profile internal only slot, expansion slot #1 may only be
populated with a half length, full height form factor card.
Non-Hot Plug and Cold
Plug SATA Models
HP Smart Array B110i SATA RAID
NOTE: Embedded SATA controller support transfer rate up to 3Gb/s
NOTE: To enable RAID for embedded SATA controller, use EZ set-up CD to
download driver, hpahcisr.sys, is part of the 8.20 PSP, Smart Start, EZSetup
CD. For more information on SW Smart Array, go to:
www.hp.com/go/sataraid
NOTE: A diskette drive or virtual FDD using LO100 Advanced Pack is
needed to install storage controller drivers during a Windows operating
system installation from a CD.
NOTE: The addition of a Smart Array hardware based storage controller to a
Non-Hot Plug SATA Model is only supported for external storage.
NOTE: Non VMware Support for software RAID. A Smart Array controller
with hw RAID must be used to support ESX.
NOTE: To enable Hot plug functionality , use HP Smart Array Hot Plug
Advance Pack for B110i (PN TC421A)
Hot Plug SATA/SAS
HP Smart Array P410 Controller (RAID 0/1/1+0)
Models
NOTE: Support transfer rate up to 6Gb/s SAS or 3Gb/s SATAHP Smart
Array P410 Controller 256 BBWC (RAID/0/1/1+0/5/5+0)
NOTE: Support transfer rate up to 6Gb/s SAS or 3Gb/s SATA
NOTE: Available upgrades: P410 with FBWC, 256MB with BBWC, 512MB with FBWC, Battery kit
DA - 13247
Worldwide — Version 51 — November 14, 2011
Page 5
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Standard Features
upgrade (for the 256MB cache), and Smart Array Advanced Pack (SAAP).
NOTE: A minimum of 256 MB cache, battery kit, and Smart Array Advanced Pack License Key upgrade
(P/N: 516471-B21) is required to enable RAID 6, 6+0
NOTE: To achieve highest possible stated transfer rate please make sure the firmware on the drive bays
(backplanes) and HP Smart Array controller up to date. Latest firmware is available to download from HP
support web site.
NOTE: HP Smart Array B110i does not support greater than 2TB hard drive.
Internal Storage Devices
Diskette Drives
Optical Drives
Via USB only
Optional SATA 9.5mm DVD-ROM Optical Drive
Optional SATA 9.5mm DVD RW Optical Drive
Up to 4 Non-hot plug SATA 3.5" drives
Up to 4 Hot plug SAS/SATA 3.5" drives
Up to 8 Hot plug SAS/SATA 2.5" drives
Drive Bays
One of the following
depending on Model
Maximum Internal
Storage
One of the following
depending on Model
Non-Hot Plug LFF SATA
Hot Plug LFF SATA
Hot Plug LFF SATA SSD
Hot Plug LFF SAS
Hot Plug SFF SATA
Hot Plug SFF SATA SSD
Hot Plug SFF SAS
Hot Plug SAS SSD
12.0TB
12.0TB
1.6TB
8.0TB
8.0TB
3.2TB
8.0TB
6.4TB
Interfaces
Parallel
Network RJ-45(Ethernet)
None
2 10/100/1000 NIC ports (plus 1 optional dedicated port for the HP
ProLiant Lights-Out 100i Remote Management)
1
0 (via USB only)
1
0 (via USB only)
5 (two front, one internal, two rear)
NOTE: In order to connect a USB device internally, the internal USB Cable
G6 Kit must be used (536769-B21)
NOTE: Please see the following URL for additional information regarding
USB support:
http://h18004.www1.hp.com/products/servers/platforms/usb-support.html.
Serial
Pointing Device (Mouse)
Graphics
Keyboard
USB
DA - 13247
4 x 3TB
4 x 3TB
4 x 400GB
4 x 2TB
8 x 1TB
8 x 400GB
8 x 1TB
8 x 800GB
Worldwide — Version 51 — November 14, 2011
Page 6
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Standard Features
Industry Standard
Compliance
ACPI V2.0 Compliant
PCI 2.2 Compliant
PXE Support
WOL Support
Microsoft® Logo certifications
IPMI 2.0, SMASH CLP, DCMI 1.0 compliant
Server Power Cords
One 6' Highline (IEC-IEC) power cord ships standard
NOTE: HP ProLiant DL servers no longer ship standard with NEMA power cords (163719-002) that
allow connection to 110V US wall outlets in a home or office. ProLiant DL servers are primarily
connected to PDU's in data center racks so they now ship standard with only a PDU power cord
(416151-B21). If a user wishes to power a ProLiant DL server using a 110V receptacle (NEMA-15), the
NEMA power cord (227099-001) must be ordered separately.
If customers require a local power cord, they can check the power cord matrix for the appropriate cord.
Please see the following power cord matrix: http://www.hp.com/go/powercordmatrix.
Power Supply
500 Watts, auto-switching, high efficiency, PFC (Power Factor Correcting)
NOTE: Factory upgradeable to high-efficiency hot plug common slot or redundant hot-plug power
supply.
NOTE: It is highly recommended that you use the HP Power Advisor in defining the "Right-Size" power
supply for your needs. HP Power Advisor can be accessed at: www.hp.com/go/hppoweradvisor.
System Fans
6 system fans ship standard; Non-hot plug, N+1 Redundant Standard
NOTE: Fan redundancy is not available when 130W processors are installed.
Operating Systems and
Virtualization Software
Support for ProLiant
Servers
Microsoft Windows Server
Oracle Solaris
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
VMware
Citrix Essentials for XenServer (Retail)
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization
Software and latest listing of software drivers available for your server, please visit our Support Matrix at:
http://www.hp.com/go/ossupport and our driver download page
http://www.hp.com/support/DL160G6.
Graphics
32MB shared supporting all display resolutions up to 1600x1200 16bpp@75Hz
NOTE: 8MB is dedicated to video memory.
Form Factor
Rack (1U), (1.75 in/4.45 cm)
DA - 13247
Worldwide — Version 51 — November 14, 2011
Page 7
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Standard Features
Embedded Systems
Management
HP Lights-Out 100
(LO100) Advanced
HP LO100 with Optional LO100 Advanced Licenses for Virtual KVM and
Virtual Media.
Features:
Embedded IPMI standard reporting
System event log access
Remote Serial console (serial redirection)
Browser, Telnet access
SMASH-CLP compliant
IPMI 2.0 compliant
Secure Socket Layer Encryption
Secure Shell Encryption
Virtual media (Floppy, CD, USB 2.0) with Advanced License
Virtual KVM with Advanced License
NOTE: For more information, see: http://www.hp.com/go/lo100
Security
Power-on password
Setup password
Diskette boot control
Secure Sockets Layer (SSL)
Secure Shell (SSH)
Warranty
This product is covered by a global limited warranty and supported by HP Services and a worldwide
network of HP Authorized Channel Partners. Hardware diagnostic support and parts replacement is
available for three years from date of purchase. Support for software and initial setup is available for 90
days from date of purchase. Enhancements to warranty services are available through HP Care Pack
services or customized service agreements. Hard drives have either a one year or three year warranty;
refer to the specific hard drive QuickSpecs for details.
NOTE: Server Warranty includes 3 year Next Day Parts replacement, 0-Years Labor, 0-Years Onsite
support (3-1-1 warranty in APJ). Additional information regarding worldwide limited warranty and
technical support is available at:
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html.
DA - 13247
Worldwide — Version 51 — November 14, 2011
Page 8
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Optional Features
HP Insight management
software
HP Insight Control for
Linux
HP Insight Control for Linux, as a product option, delivers essential lifecycle
management that can help save time and money by integrating discovery,
server deployment, firmware updates & provisioning, health & performance
management, remote management, and virtualization. This makes it easy to
optimize your IT infrastructure through a single, simple management console.
The IC-Linux installs and licenses software modules that are integrated into
HP System Insight Manager (HP SIM).
HP Insight Control for Linux serves environments requiring a Linux-based
management console. See www.hp.com/go/ic-linux.
HP Insight Control for Linux includes one year of 24 x 7 HP Software
Technical Support and Update Service ensuring rapid access to HP support
staff and proactive delivery of software updates. For more information about
this service, please visit: http://www.hp.com/services/insight
HP Insight Control server deployment is a deployment solution for HP
ProLiant and Integrity servers hosted on a Windows CMS. It automates the
process of deploying and provisioning server software, enabling companies
to quickly and easily adapt to changing business demands. Insight Control
server deployment includes software optimizations for HP servers, including
the HP scripting toolkits, configuration jobs for leading industry-standard
operating systems, sample unattended files, and HP server support packs that
include software drivers, management agents, and important documentation.
Deploying servers can be accomplished either through imaging or through
scripting.
Insight Control server
deployment
Insight Control server deployment is hosted on a Windows server and is
intended for heterogeneous environments deploying Windows, Linux,
VMware ESX and Microsoft Hyper-V systems.
Core Infrastructure
Management
Insight Control server deployment includes one year of 24 x 7 HP Software
Technical Support and Update Service ensuring rapid access to HP support
staff and proactive delivery of software updates. For more information about
this service, please visit: http://www.hp.com/services/insight.
HP Systems Insight Manager (HP SIM) provides a unified, secure and
extensible standards-based environment to centrally manage servers, storage
and other infrastructure devices, (both HP and non-HP) across multiple
operating system platforms.
HP Systems Insight
Manager
Subscriber's Choice
ROMPaq, software and
latest drivers
DA - 13247
For additional information, please see: http://www.hp.com/go/insight.
Subscriber's Choice Driver and Support Alerts/Notifications is a web-based
email subscription service that provides software and driver change
notifications for ProLiant products. Sign up at:
http://www.hp.com/go/subscriberschoice and customize your profile to
receive various new alerts as they become available, on a weekly or monthly
basis.
The latest software, drivers, and firmware fully optimized and tested for your
ProLiant server and options; downloaded from Software and Drivers
download pages website at: http://www.hp.com/go/support and from
www.hp.com/servers/easysetup. Contains the following:
Worldwide — Version 51 — November 14, 2011
Page 9
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Optional Features
HP Insight Management Agents for Systems Insight Manager (SIM)
Integration
HP Systems Management Homepage
Array Configuration Utility (ACU)
Array Diagnostics Utility (ADU)
HP Insight Diagnostics
High Performance
Clusters
HP Cluster Platforms
HP Cluster Platforms are specifically engineered, factory-integrated largescale ProLiant clusters optimized for High Performance Computing, with a
choice of servers, networks and software. Operating system options include
specially priced offerings for Red Hat Enterprise Linux and SUSE Linux
Enterprise Server, as well as Microsoft Windows HPC Server. A Cluster
Platform Configurator simplifies ordering. http://www.hp.com/go/clusters
HP HPC Interconnects
High Performance Computing (HPC) interconnect technologies are available
for this server as part of the HP Cluster Platform portfolio. These high-speed
InfiniBand and Gigabit interconnects are fully supported by HP when
integrated within an HP cluster. Flexible, validated solutions can be defined
with the help of configuration tools.
http://www.hp.com/techservers/clusters/ucp/index.html
HP Insight Cluster
HP Insight Cluster Management Utility (CMU) is an HP-licensed and HPManagement Utility
supported suite of tools that are used for lifecycle management of hyperscale
clusters of Linux ProLiant systems. CMU includes software for the centralized
provisioning, management and monitoring of nodes. CMU makes the
administration of clusters user friendly, efficient, and effective.
http://www.hp.com/go/cmu
HP HPC Linux Value Pack HP HPC Linux Value Pack (Value Pack) is an HP-licensed and HP-supported
option to HP Insight CMU, for the development and deployment of
applications on HPC Cluster Platforms. Value Pack includes the Platform LSF
workload scheduler and Platform Application Center, as well as the HP-MPI
parallelization library. HP HPC Linux Value Pack
Factory Express Portfolio
for Servers and Storage
HP Factory Express offers configuration, customization, integration and deployment services for HP
servers and storage products. Customers can choose how their factory solutions are built, tested,
integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading, asset
tagging, and custom packaging. HP products supported through Factory Express include a wide array of
servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000
servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network
switches.
For more information on Factory Express services for your specific server model please contact your sales
representative or go to: http://www.hp.com/go/factory-express.
DA - 13247
Worldwide — Version 51 — November 14, 2011
Page 10
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Optional Features
HP Enterprise
Configurator
The HP eConfigure Enterprise Configurator now provides factory default racking for our HP hardware
portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our
valued customers. If you require "custom" rack configuration, please contact HP's Customer Business
Center or an Authorized Partner for assistance. http://www.hp.com/products/configurator.
DA - 13247
Worldwide — Version 51 — November 14, 2011
Page 11
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Service and Support
Service and Support
HP Technology Services for Industry Standard Servers and BladeSystem
Capitalizing on HP ProLiant server and HP BladeSystem capabilities requires a service partner who
understands your increasingly complex business technology environment. That's why it makes sense to
team up with the people who know HP infrastructure hardware and software best - the experienced
professionals at HP Services.
What HP ProLiant and BladeSystem Services can do for you
HP ProLiant and BladeSystem Services can help you design, deploy, test, integrate, support, and manage
IT and infrastructure solutions. This way, HP proposes services solutions that include more than just uplift
of base warranty. You can get the support you need by choosing from one of a number of service
packaged solutions we have designed to address wider set of customer support needs.
HP Technology Services meets business challenges with services offered in three packages:
Optimized Care Package, Standard Care Package, and Basic Care Package
Available for each product group. Such packaged solutions enable customers to optimize technology
operations, minimize risk and drive better business outcomes with easy-to-buy, easy-to-use scalable
support packages for servers, storage, networking and software.
Optimized Care Package Supports maintaining servers at optimum performance availability
HP ProLiant Server Hardware Installation
Provides for the basic hardware installation of HP branded servers, storage devices and networking
options to assist you in bringing your new hardware into operation in a timely and professional manner.
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN.pdf
3-Year HP 6 hour Hardware Support Onsite Call-to-Repair Service
Provides an IT manager with a team of support specialists who will quickly begin troubleshooting the
system to help return the hardware to operating condition within 6 hours of the initial service request to
the HP Global Solution Center.
http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EN.pdf
Additional Services:
Services Software OS (Microsoft, Linux (SUSE/Red Hat) Installation and Start Up and
Software Support) plus Microsoft or Linux education courses +30 Proactive Select Credits, Factory
Express.
DA - 13247
Worldwide — Version 51 — November 14, 2011
Page 12
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Service and Support
Standard Care Package
Package that maintains high level of server availability
HP ProLiant Server Hardware Installation
Provides for the basic hardware installation of HP branded servers, storage devices and networking
options to assist you in bringing your new hardware into operation in a timely and professional manner.
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN.pdf
3-Year HP 24x7 4 hour Response, Hardware Support Onsite Service
Provides you with rapid remote support and if required an HP authorized representative who will arrive
on site any time and day of the year to begin hardware maintenance service within 4 hours of the service
request being logged.
http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EEE.pdf
Additional Services:
Services Software OS (Microsoft, Linux (SUSE/Red Hat) Installation and Start Up and
Software Support); +10 Proactive Select Credits, Factory Express.
Basic Care Package
Delivers minimum recommended support service level
HP ProLiant Server Hardware Installation
Provides for the basic hardware installation of HP branded servers, storage devices and networking
options to assist you in bringing your new hardware into operation in a timely and professional manner
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN.pdf
3-Year HP 13x5 4 hour Response, Hardware Support Onsite Service
Delivers increased equipment availability and productivity with rapid remote support and onsite response
for your HP server and storage hardware
http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EEE.pdf
Additional Services:
Services Software OS (Microsoft, Linux (SUSE/Red Hat) Installation and Start Up and
Software Support), Factory Express.
Insight Remote Support
The packages include HP Insight Remote Support that uses proven technology to deliver secure, reliable
24x7 remote monitoring, diagnoses, and problem resolution. It is available at no additional cost to all
warranty, HP Care Pack Service, and service agreement customers.
For more information
To learn more on HP ProLiant servers and HP BladeSystem servers, please contact your HP sales
representative or HP Authorized Channel Partner. Or visit: http://www.hp.com/services/proliant
DA - 13247
Worldwide — Version 51 — November 14, 2011
Page 13
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Pre-configured Models
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory
Integrated Models" section.
NOTE: Not all models are available in all regions. Check with your local country HP offices for availability.
NOTE: Pre-configured models ship with the configurations below. Options can be selected from the Core or Additional options
section of this QuickSpecs.
NOTE: HP does not allow factory integration of options into pre-configured models. Any additional options purchased will be
shipped separately.
NOTE: If you desire a custom configuration please see "Configuration Information - Factory Integrated Models" section of this
QuickSpecs.
Hot Plug Serial ATA (SATA)/ Serial Attached SCSI (SAS) Pre-configured Models
NOTE: To enable Hot Plug functionality for P/N 590159-xx1 use a HP Smart Array P212 Controller or HP Smart Array P410
Controller or HP Hot Plug Advance Pack.
(1) Intel® Xeon® L5630 (2.13GHz/4-core/12MB/40W, DDR3-1066, HT,
HP ProLiant DL160 G6
Processor(s)
L5630 1P 4GB-R B110i
Turbo 1/1/2/2/) Processor
Cold Plug SATA 4 LFF
12 MB shared L3 cache
Cache Memory
500W PS Server
4GB (1 x 4GB) PC3-10600R (RDIMM)
Memory
590159-xx1
NOTE: Total of 18 DIMM slots
HP NC362i Integrated Dual Port Gigabit Server Adapter
Network Controller
HP Smart Array B110i SATA RAID Controller
Storage Controller
None ship standard
Hard Drive
Up to 4 large form factor Pluggable drives
Internal Storage
None ship standard
Optical Drive
500W high efficiency multi-output supply (ships standard)
Power Supply
1U
Form Factor
Server Warranty includes 3 year Next Day Parts replacement, 0-Years Labor,
Warranty
0-Years Onsite support (3-1-1 warranty in APJ)
HP ProLiant DL160 G6
E5620 1P 8GB-R P410
SAS/SATA 4 LFF 500W
PS Server
590161-xx1
Processor(s)
Cache Memory
Memory
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive
Power Supply
Form Factor
Warranty
HP ProLiant DL160 G6
Processor(s)
DA - 13247
(1) Intel® Xeon® E5620 (2.40GHz/4-core/12MB/80W, DDR3-1066, HT,
Turbo 1/1/2/2) Processor
12 MB shared L3 cache
8GB (2 x 4GB) PC3-10600R (RDIMM)
NOTE: Total of 18 DIMM slots
HP NC362i Integrated Dual Port Gigabit Server Adapter
HP Smart Array P410 Controller
None ship standard
Up to 4 large form factor Hot Plug drives
None ship standard
500W high efficiency multi-output supply (ships standard)
1U
Server Warranty includes 3 year Next Day Parts replacement, 0-Years Labor,
0-Years Onsite support (3-1-1 warranty in APJ)
(2) Intel® Xeon® X5650 (2.66GHz/6-core/12MB/95W, DDR3-1333, HT,
Worldwide — Version 51 — November 14, 2011
Page 14
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Pre-configured Models
X5650 2P 24GB-R
P410/256 BBWC 8 SFF
500W PS Server
590162-xx1
Cache Memory
Memory
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive
Power Supply
Form Factor
Warranty
HP ProLiant DL160 G6
Processor(s)
E5606 1P 4GB-R 500W
PS Entry Server
Cache Memory
637235-xx1
Memory
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive
Power Supply
Form Factor
Warranty
Country Code Key
xx=00
xx=20
xx=29
xx=37
xx=42
xx=AA
DA - 13247
Turbo 2/2/3/3/4/4) Processor
12MB shared L3 cache
24GB (6 x 4GB) PC3-10600R (RDIMM)
NOTE: Total of 18 DIMM slots
HP NC362i Integrated Dual Port Gigabit Server Adapter
HP Smart Array P410/ 256MB BBWC
None ship standard
Up to 8 Small form factor Hot Plug drives
None ship standard
500W high efficiency multi-output supply (ships standard)
1U
Server Warranty includes 3 year Next Day Parts replacement, 0-Years Labor,
0-Years Onsite support (3-1-1 warranty in APJ)
(1) Intel® Xeon® E5606 (2.13GHz/4-core/8MB/80W, DDR3-800)
Processor
8 MB shared L3 cache
4GB (1 x 4GB) PC3-10600R (RDIMM)
NOTE: Total of 18 DIMM slots
HP NC362i Integrated Dual Port Gigabit Server Adapter
HP Smart Array B110i SATA RAID Controller
None ship standard
Up to 4 large form factor Pluggable drives
None ship standard
500W high efficiency multi-output supply (ships standard)
1U
Server Warranty includes 3 year Next Day Parts replacement, 0-Years Labor,
0-Years Onsite support (3-1-1 warranty in APJ)
U.S.
Brazil
Japan
APD
Euro
PRC
Worldwide — Version 51 — November 14, 2011
Page 15
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on
configurable product offerings and requirements.
NOTE: Configure-to-order (CTO) servers must start with a CTO Chassis.
NOTE: FIO indicates that this option is only available as a factory installable option.
Step 1: Base Configuration (choose one of the following configurable models)
HP Models
Non-Hot Plug LFF SATA Model
NOTE: Non-Hot Plug models are not upgradeable to Hot Plug.
NOTE: The addition of a Smart Array controller is supported for external storage use
only.
HP ProLiant DL160 G6 Non-hot Plug Configure-to-order Rack Server
Factory Integrated Model ships with:
HP NC362i Integrated Dual Port Gigabit Server Adapter
Slot 1: FL /FH PCI-Express x16 Gen 2 slot or
Slot 1 : HL/FH x16 PCI-Express Gen2 slot and
Slot 2 : HL/LP x8 PCI-Express Gen2 slot (internal only)
One available full-length/full-height PCI-Express x16 Generation 2 slot
One Highline IEC Power Cord
6 Non-Hot Plug Fans
Rack (1U), (1.75 in / 4.45 cm)
Tool-less Fixed Rails
4 LFF drive cage
Hot Plug LFF Model
HP ProLiant DL160 G6 Hot Plug Configure-to-order Rack Server
Factory Integrated Model ships with:
HP NC362i Integrated Dual Port Gigabit Server Adapter
Available PCI-Express Generation 2 slots:
Slot 1: PCIe 2.0 x16 (connector)/x16 (speed), half-length/full-height
Slot 2: PCIe 2.0 x8 (connector)/x4 (speed), half-length/half-height
One Highline IEC Power Cord
6 Non-Hot Plug Fans
Rack (1U), (1.75 in / 4.45 cm)
Tool-less Fixed Rails
Hot Plug SFF Model
HP ProLiant DL160 G6 8 SFF Hot Plug Configure-to-order Server
Factory Integrated Model ships with:
HP NC362i Integrated Dual Port Gigabit Server Adapter
Available PCI-Express Generation 2 slots:
Slot 1: PCIe 2.0 x16 (connector)/x16 (speed), half-length/full-height
Slot 2: PCIe 2.0 x8 (connector)/x4 (speed), half-length/half-height
One Highline IEC Power Cord
6 Non-Hot Plug Fans
Rack (1U), (1.75 in / 4.45 cm)
DA - 13247
Worldwide — Version 51 — November 14, 2011
491531-B21
491532-B21
593352-B21
Page 16
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Configuration Information - Factory Integrated Models
Tool-less Fixed Rails
NOTE: SFF CTO Chassis (P/N: 593352-B21) is not configurable with 130W Intel®
Xeon® Processor Models.
Step 2: Choose Required Options (only one of the following from each list unless otherwise
noted)
HP Processors
NOTE: If 2 processors are desired, select one xxxxxx-L21 and one xxxxxx-B21.
Six-Core Processors
HP DL160 G6 Intel® Xeon® X5690 (3.46GHz/6-core/12MB/130W) FIO Processor
Kit
NOTE: Not available with SFF CTO Chassis (P/N: 593352-B21) in Step 1.
HP DL160 G6 Intel® Xeon® X5675 (3.06GHz/6-core/12MB/95W) FIO Processor
Kit
HP DL160 G6 Intel® Xeon® X5660 (2.80GHz/6-core/12MB/95W) FIO Processor
Kit
HP DL160 G6 Intel® Xeon® X5650 (2.66GHz/6-core/12MB/95W) FIO Processor
Kit
HP DL160 G6 Intel® Xeon® E5649 (2.53GHz/6-core/12MB/80W) FIO Processor
Kit
HP DL160 G6 Intel® Xeon® E5645 (2.40GHz/6-core/12MB/80W) FIO Processor
Kit
HP DL160 G6 Intel® Xeon® L5640 (2.26GHz/6-core/12MB/60W) FIO Processor
Kit
Quad-Core Processors
HP DL160 G6 Intel® Xeon® X5687 (3.60GHz/4-core/12MB/130W) FIO Processor
Kit
NOTE: Not available with SFF CTO Chassis (P/N: 593352-B21) in Step 1.
HP DL160 G6 Intel® Xeon® X5672 (3.20GHz/4-core/12MB/95W) FIO Processor
Kit
HP DL160 G6 Intel® Xeon® E5620 (2.40GHz/4-core/12MB/80W) FIO Processor
Kit
HP DL160 G6 Intel® Xeon® E5607 (2.26GHz/4-core/8MB/80W) FIO Processor Kit
HP DL160 G6 Intel® Xeon® E5606 (2.13GHz/4-core/8MB/80W) FIO Processor Kit
HP DL160 G6 Intel® Xeon® E5603 (1.60GHz/4-core/4MB/80W) FIO Processor Kit
HP DL160 G6 Intel® Xeon® L5630 (2.13GHz/4-core/12MB/40W) FIO Processor
Kit
NOTE: HT indicates that the processor model supports Intel® Hyper-Threading
Technology.
NOTE: Turbo indicates the maximum potential frequency increment when using
Intel® Turbo Boost Technology, with 4, 3, 2, and 1 cores active.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory
speed may depend on the quantity and type of DIMMs installed.
NOTE: Support on Intel® Xeon® Processor Models 130W processor:
639493-L21
637345-L21
589723-L21
589721-L21
637349-L21
637351-L21
589700-L21
637343-L21
637347-L21
589711-L21
641512-L21
637250-L21
637353-L21
589698-L21
HP 750W CS HE Power Supply (P/N: 535683-B21) is required
DA - 13247
Worldwide — Version 51 — November 14, 2011
Page 17
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Configuration Information - Factory Integrated Models
8SFF drive cage is not supported when 130W processors are installed
No Fan redundancy is available when 130W Processors are installed.
Change fan location from #6 to #3
NOTE: For the Intel 5000 Series, the letter preceding the model number indicates the
performance/wattage of the processor. "X" denotes High Performance/Wattage; "E"
denotes Enterprise Performance/Wattage (Mainstream); and "L" denotes Lower
Wattage.
HP Memory
Registered DIMMs (RDIMMs)
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9 Memory
Kit
HP 4GB (1x4GB) Single Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low
Power Memory Kit
HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory
Kit
HP 4GB (1x4GB) Single Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low
Power Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory
Kit
HP 16GB (1x16GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 LP
Memory Kit
HP 16GB (1x16GB) Quad Rank x4 PC3-8500 (DDR3-1066) Registered CAS-7
Memory Kit
Unbuffered with ECC DIMMs (UDIMMs)
HP 1GB (1x1GB) Single Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3L-10600 (DDR3-1333) Unbuffered CAS-9 Low
Power Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed
memory configuration rules and guidelines, please use the Online DDR3 Memory
Configuration Tool: www.hp.com/go/ddr3memory-configurator.
NOTE: Kits described as LP include Low Power DIMMs. For more information on
ProLiant Energy Efficient Features, see: http://www.hp.com/go/proliant-energyefficient
NOTE: There is a maximum support limitation of 8 ranks per memory channel
(maximum of 2 quad rank DIMMs per channel)
NOTE: PC3L is a low voltage memory.
DA - 13247
Worldwide — Version 51 — November 14, 2011
500656-B21
604504-B21
500658-B21
593339-B21
604506-B21
500662-B21
627812-B21
500666-B21
500668-B21
500670-B21
619488-B21
500672-B21
Page 18
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Configuration Information - Factory Integrated Models
HP Hard Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller,
and the server backplane) should operate at the same data transfer rate or the system
bandwidth will be negotiated down to an acceptable level for all components.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific
hard drive QuickSpecs for details.
SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives
NOTE: A minimum of one SATA Non-Hot Plug hard drive is required ONLY when
purchasing Non-Hot Plug CTO Chassis Model (P/N 491531-B21) in Step 1.
HP 2TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard
Drive
HP 1TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard
Drive
HP 500GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty
Hard Drive
SATA Non-Hot Plug LFF (3.5-inch) Entry (ETY) Drives
HP 160GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1yr Warranty Hard
Drive
HP Storage Controllers
HP Hot Plug HDD
Backplane Option
NOTE: A minimum of one Smart Array Controller is ONLY required when purchasing
Hot Plug SFF CTO Chassis Model (P/N 593352-B21) in Step 1.
NOTE: The below storage controllers are intended for use with internal drives in the
Hot Plug CTO Chassis Model (P/N 491532-B21).
NOTE: With the HP Smart Array P410 Controller, the addition of the battery backed
cache upgrade enables BBWC, RAID 5, 5+0, array expansion, logical drive
extension, RAID migration, and stripe size migration. In order to upgrade to RAID 6, at
least 256MB Cache and a Battery is required in addition to the Smart Array Advanced
Pack license (P/N 516471-B21).
NOTE: To use the internal only PCI-e slot when purchasing the Hot Plug CTO
Chassis, a HP Smart Array P410 controller must be selected.
HP Smart Array P812/1G FBWC 2-ports Int/4-ports Ext PCIe x8 SAS Controller
HP Smart Array P410/1G FBWC 2-ports Int PCIe x8 SAS Controller
HP Smart Array P410/512 FBWC 2-ports Int PCIe x8 SAS Controller
HP Smart Array P410/ZM 2-ports Int PCIe x8 FIO SAS Controller
HP Smart Array P410/256 BBWC 2-ports Int PCIe x8 FIO SAS Controller
NOTE: A minimum of one Hot Plug HDD Backplane option is ONLY required when
purchasing Hot Plug CTO Chassis Model (P/N 491532-B21) in Step 1.
HP 2 HDD Backplane G6 FIO Kit
NOTE: Supports LFF hard drives only.
HP 4 Hard Drive Hot Plug Backplane G6 Kit
NOTE: Supports LFF hard drives only.
DA - 13247
Worldwide — Version 51 — November 14, 2011
507774-B21
507772-B21
458941-B21
458947-B21
487204-B21
572532-B21
578230-B21
462860-B21
491195-B21
518593-B21
512181-B21
Page 19
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Configuration Information - Factory Integrated Models
HP Power Supplies
NOTE: Prior to making a power supply selection it is highly recommended that the HP
Power Advisor is run to determine the right size power supply for your server
configuration. The HP Power Advisor is located at:
http://www.hp.com/go/hppoweradvisor
HP 500W Factory Integrated Power Supply Kit
HP 460W Common Slot Gold Hot Plug Factory Integrated Power Supply Kit with
Backplane
HP 750W Common Slot Gold Hot Plug Factory Integrated Power Supply Kit with
Backplane
HP 460W Common Slot Platinum Hot Plug Power Supply Kit with Backplane
HP 365W Redundant Power Supply Kit w/ Backplane
NOTE: The 400W 1U G6 RPS (P/N: 532092-B21) is limited to the following
configuration support: (1.) NHP SATA Model (P/N: 491531-B21), (2.) Up to 2 60W
Low Voltage processors (589700-B21 (3.) Unbuffered memory (P/N: 500668-B21 or
500670-B21), 4. No graphics cards supported via PCI-e.
515915-B21
535684-B21
535683-B21
605923-B21
532092-B21
Step 3: Choose Additional Factory Integratable Options
HP Storage Controllers
NOTE: The below storage controllers are intended for use with internal drives in the
Hot Plug CTO Chassis Model (P/N 491532-B21or P/N 593352-B21). The HP Smart
Array P212 Controller (P/N 491191-B21) is supported in the Non-Hot Plug Model
(P/N 491531-B21) for external storage control ONLY.
NOTE: With the HP Smart Array P410 Controller, the addition of the battery backed
cache upgrade enables BBWC, RAID 5, 5+0, array expansion, logical drive
extension, RAID migration, and stripe size migration. In order to upgrade to RAID 6, at
least 256MB Cache and a Battery is required in addition to the Smart Array Advanced
Pack license (P/N 516471-B21).
NOTE: To use the internal only PCI-e slot when purchasing the Hot Plug CTO
Chassis, a HP Smart Array P410 controller must be selected. When selecting the HP
Smart Array P212 Controller (P/N 491191-B21), the controller will be installed in the
x16 slot since it has both an internal and external port. This prevents the use of the
internal slot and no PCI-E slots will be available.
HP Smart Array P212/256 BBWC 1-ports Int/1-ports Ext PCIe x8 FIO SAS Controller
HP Smart Array P410/ZM 2-ports Int PCIe x8 FIO SAS Controller
HP Smart Array P410/256 BBWC 2-ports Int PCIe x8 FIO SAS Controller
HP Smart Array P411/256 BBWC 2-ports Ext PCIe x8 FIO SAS Controller
491191-B21
462860-B21
491195-B21
491193-B21
Step 4: Choose Additional Options for Factory Integration
NOTE: For additional "Core Options" and "Additional Options", please refer to the "Options" section below.
DA - 13247
Worldwide — Version 51 — November 14, 2011
Page 20
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Core Options
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use
of an HP approved configurator. Contact your local sales representative for additional information.
HP Dedicated Management Port Kit
516006-B21
HP Unique Options
HP Processors
Six-Core Processors
HP DL160 G6 Intel® Xeon® X5690 (3.46GHz/6-core/12MB/130W) Processor Kit
NOTE: Not supported in Small Form Factor (SFF) Models.
HP DL160 G6 Intel® Xeon® X5680 (3.33GHz/6-core/12MB/130W) Processor Kit
NOTE: Not supported in Small Form Factor (SFF) Models.
HP DL160 G6 Intel® Xeon® X5675 (3.06GHz/6-core/12MB/95W) Processor Kit
HP DL160 G6 Intel® Xeon® X5670 (2.93GHz/6-core/12MB/95W) Processor Kit
HP DL160 G6 Intel® Xeon® X5660 (2.80GHz/6-core/12MB/95W) Processor Kit
HP DL160 G6 Intel® Xeon® X5650 (2.66GHz/6-core/12MB/95W) Processor Kit
HP DL160 G6 Intel® Xeon® E5649 (2.53GHz/6-core/12MB/80W) Processor Kit
HP DL160 G6 Intel® Xeon® E5645 (2.40GHz/6-core/12MB/80W) Processor Kit
HP DL160 G6 Intel® Xeon® L5640 (2.26GHz/6-core/12MB/60W) Processor Kit
Quad-Core Processors
HP DL160 G6 Intel® Xeon® X5687 (3.60GHz/4-core/12MB/130W) Processor Kit
NOTE: Not supported in Small Form Factor (SFF) Models.
HP DL160 G6 Intel® Xeon® X5677 (3.46GHz/4-core/12MB/130W) Processor Kit
NOTE: Not supported in Small Form Factor (SFF) Models.
HP DL160 G6 Intel® Xeon® X5672 (3.20GHz/4-core/12MB/95W) Processor Kit
HP DL160 G6 Intel® Xeon® X5570 (2.93GHz/4-core/8MB/95W) Processor Kit
HP DL160 G6 Intel® Xeon® X5560 (2.80GHz/4-core/8MB/95W) Processor Kit
HP DL160 G6 Intel® Xeon® X5550 (2.66GHz/4-core/8MB/95W) Processor Kit
HP DL160 G6 Intel® Xeon® E5640 (2.66GHz/4-core/12MB/80W) Processor Kit
HP DL160 G6 Intel® Xeon® E5630 (2.53GHz/4-core/12MB/80W) Processor Kit
HP DL160 G6 Intel® Xeon® E5620 (2.40GHz/4-core/12MB/80W) Processor Kit
HP DL160 G6 Intel® Xeon® E5607 (2.26GHz/4-core/8MB/80W) Processor Kit
HP DL160 G6 Intel® Xeon® E5606 (2.13GHz/4-core/8MB/80W) Processor Kit
HP DL160 G6 Intel® Xeon® E5603 (1.60GHz/4-core/4MB/80W) Processor Kit
HP DL160 G6 Intel® Xeon® E5540 (2.53GHz/4-core/8MB/80W) Processor Kit
HP DL160 G6 Intel® Xeon® E5530 (2.40GHz/4-core/8MB/80W) Processor Kit
HP DL160 G6 Intel® Xeon® E5520 (2.26GHz/4-core/8MB/80W) Processor Kit
HP DL160 G6 Intel® Xeon® L5630 (2.13GHz/4-core/12MB/40W) Processor Kit
HP DL160 G6 Intel® Xeon® L5520 (2.26GHz/4-core/8MB/60W) Processor Kit
HP DL160 G6 Intel® Xeon® E5506 (2.13GHz/4-core/4MB/80W) Processor Kit
HP DL160 G6 Intel® Xeon® E5504 (2.00GHz/4-core/4MB/80W) Processor Kit
Dual Core Processors
HP DL160 G6 Intel® Xeon® E5503 (2.0GHz/2-core/4MB/80W) Processor Kit
NOTE: If 2 processors are desired, select one 593899-L21 and one 593899-B21.
DA - 13247
Worldwide — Version 51 — November 14, 2011
639493-B21
589727-B21
637345-B21
589725-B21
589723-B21
589721-B21
637349-B21
637351-B21
589700-B21
637343-B21
629850-B21
637347-B21
508231-B21
573893-B21
491511-B21
589715-B21
589713-B21
589711-B21
641512-B21
637250-B21
637353-B21
490461-B21
573895-B21
490459-B21
589698-B21
491507-B21
573897-B21
490457-B21
593899-B21
Page 21
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Core Options
NOTE: HT indicates that the processor model supports Intel® Hyper-Threading
Technology.
NOTE: Turbo indicates the maximum potential frequency increment when using
Intel® Turbo Boost Technology, with 4, 3, 2, and 1 cores active.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory
speed may depend on the quantity and type of DIMMs installed.
NOTE: For the Intel 5000 Series, the letter preceding the model number indicates the
performance/wattage of the processor. "X" denotes High Performance/Wattage; "E"
denotes Enterprise Performance/Wattage (Mainstream); and "L" denotes Lower
Wattage.
HP Memory
Registered DIMMs (RDIMMs)
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9 Memory
Kit
HP 4GB (1x4GB) Single Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low
Power Memory Kit
HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory
Kit
HP 4GB (1x4GB) Single Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low
Power Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory
Kit
HP 16GB (1x16GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 LP
Memory Kit
HP 16GB (1x16GB) Quad Rank x4 PC3-8500 (DDR3-1066) Registered CAS-7
Memory Kit
Unbuffered with ECC DIMMs (UDIMMs)
HP 1GB (1x1GB) Single Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3L-10600 (DDR3-1333) Unbuffered CAS-9 Low
Power Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed
memory configuration rules and guidelines, please use the Online DDR3 Memory
Configuration Tool: www.hp.com/go/ddr3memory-configurator.
NOTE: Kits described as LP include Low Power DIMMs. For more information on
ProLiant Energy Efficient Features, see: http://www.hp.com/go/proliant-energyefficient
DA - 13247
Worldwide — Version 51 — November 14, 2011
500656-B21
604504-B21
500658-B21
593339-B21
604506-B21
500662-B21
627812-B21
500666-B21
500668-B21
500670-B21
619488-B21
500672-B21
Page 22
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Core Options
HP Drive Cage Options
HP 4 Hard Drive Hot Plug Backplane G6 Kit
NOTE: Installation of the 4 HDD Hot Plug Backplane G6 Kit (512181-B21) is
required if ordering third or fourth Hard Drives for Hot Plug models only.
512181-B21
HP Optical Drives
HP 9.5mm SATA DVD-ROM Optical Drive
HP 9.5mm SATA DVD-RW Optical Drive
481045-B21
481047-B21
HP Hard Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller,
and the server backplane) should operate at the same data transfer rate or the system
bandwidth will be negotiated down to an acceptable level for all components.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific
hard drive QuickSpecs for details.
NOTE: HP Smart Array B110i does not support greater than 2TB hard drive
SATA Hot Plug SFF (2.5-inch) Midline (MDL) Drives
HP 1TB 3G SATA 7.2K rpm SFF (2.5-inch) Hot Plug Midline 1yr Warranty Hard Drive
HP 500GB 3G SATA 7.2K rpm SFF (2.5-inch) Midline 1yr Warranty Hard Drive
SATA Hot Plug LFF (3.5-inch) Midline (MDL) Drives
(SAS/SATA Hot Plug Models Only)
NOTE: A SAS HBA or Array Controller is required.
HP 3TB 3G SATA 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive
HP 2TB 3G SATA 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive
HP 1TB 3G SATA 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive
HP 500GB 3G SATA 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive
SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives
(Non-Hot Plug Models Only)
HP 3TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty Hard
Drive
HP 2TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard
Drive
HP 1TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard
Drive
HP 500GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty
Hard Drive
SATA Non-Hot Plug LFF (3.5-inch) Entry (ETY) Drives
HP 250GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1yr Warranty Hard
Drive
HP 160GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1yr Warranty Hard
Drive
SATA Hot Plug LFF (3.5-inch) Entry (ETY) Drives
HP 250GB 3G SATA 7.2K rpm LFF (3.5-inch) Entry 1yr Warranty Hard Drive
HP 160GB 3G SATA 7.2K rpm LFF (3.5-inch) Entry 1yr Warranty Hard Drive
DA - 13247
Worldwide — Version 51 — November 14, 2011
625609-B21
507750-B21
628059-B21
507632-B21
454146-B21
458928-B21
628063-B21
507774-B21
507772-B21
458941-B21
571232-B21
458947-B21
571230-B21
458945-B21
Page 23
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Core Options
NOTE: Please see QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13021_div/13021_div.html
(Worldwide)
SATA Hot Plug 2.5" Enterprise Mainstream Solid State Drives
HP 400GB 3G SATA MLC SFF (2.5-inch) Enterprise Mainstream 3yr Warranty Solid
State Drive
HP 200GB 3G SATA MLC SFF (2.5-inch) Enterprise Mainstream 3yr Warranty Solid
State Drive
HP 120GB 3G SATA SFF (2.5-inch) Midline 1yr Warranty Solid State Drive
HP 100GB 3G SATA MLC SFF (2.5-inch) Enterprise Mainstream 3yr Warranty Solid
State Drive
SATA Hot Plug 3.5" Midline (MDL) Solid State Drives
HP 400GB 3G SATA MLC LFF (3.5-inch) Enterprise Mainstream 3yr Warranty Solid
State Drive
HP 200GB 3G SATA MLC LFF (3.5-inch) Enterprise Mainstream 3yr Warranty Solid
State Drive
HP 100GB 3G SATA MLC LFF (3.5-inch) Enterprise Mainstream 3yr Warranty Solid
State Drive
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13415_div/13415_div.html
(Worldwide)
SAS Hot Plug (2.5") SFF Enterprise (ENT) Drives
HP 900GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard
Drive
HP 600GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard
Drive
HP 450GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard
Drive
HP 300GB 6G SAS 15K rpm SFF (2.5-inch) Hot Plug Enterprise 3 yr Warranty Hard
Drive
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard
Drive
HP 146GB 6G SAS 15K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard
Drive
HP 72GB 6G SAS 15K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard
Drive
SAS Hot Plug (3.5") Enterprise (ENT) Drives
HP 600GB 6G SAS 15K rpm LFF (3.5-inch) Dual Port Enterprise 3yr Warranty Hard
Drive
HP 450GB 6G SAS 15K rpm LFF (3.5-inch) Dual Port Enterprise 3yr Warranty Hard
Drive
DA - 13247
Worldwide — Version 51 — November 14, 2011
636597-B21
636595-B21
572073-B21
636593-B21
636611-B21
636609-B21
636607-B21
619291-B21
581286-B21
581284-B21
627117-B21
507127-B21
512547-B21
512545-B21
516828-B21
516816-B21
Page 24
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Core Options
HP 300GB 6G SAS 15K rpm LFF (3.5-inch) Dual Port Enterprise 3yr Warranty Hard
Drive
NOTE: The addition of a Smart Array controller is required to support SAS hard
drives.
SAS Non Hot Plug (3.5") LFF Enterprise (ENT) Drives
HP 600GB 6G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr
Warranty Hard Drive
HP 450GB 6G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr
Warranty Hard Drive
HP 300GB 6G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr
Warranty Hard Drive
NOTE: The addition of a Smart Array controller is required to support SAS hard
drives.
SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives
HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) Dual Port Midline 1yr Warranty Hard Drive
HP 500GB 6G SAS 7.2K rpm SFF (2.5-inch) Dual Port Midline 1yr Warranty Hard
Drive
SAS Hot Plug LFF (3.5-inch) Midline (MDL) Drives
HP 3TB 6G SAS 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive
HP 2TB 6G SAS 7.2K rpm LFF (3.5-inch) Dual Port Midline 1yr Warranty Hard Drive
HP 1TB 6G SAS 7.2K rpm LFF (3.5-inch) Dual Port Midline 1yr Warranty Hard Drive
NOTE: The purchase of SAS HBA or array controller is required.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12244_div/12244_div.html
(Worldwide)
6G SAS Hot Plug Enterprise Performance Solid State Drives
HP 400GB 6G SAS SLC SFF (2.5-inch) Enterprise Performance 3yr Warranty Solid
State Drive
HP 200GB 6G SAS SLC SFF (2.5-inch) Enterprise Performance 3yr Warranty Solid
State Drive
6G SAS Hot Plug Enterprise Mainstream Solid State Drives
HP 800GB 6G SAS MLC SFF (2.5-inch) Enterprise Mainstream 3yr Warranty Solid
State Drive
HP 400GB 6G SAS MLC SFF (2.5-inch) Enterprise Mainstream 3yr Warranty Solid
State Drive
HP 200GB 6G SAS MLC SFF (2.5-inch) Enterprise Mainstream 3yr Warranty Solid
State Drive
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/14038_div/14038_div.html
(Worldwide)
DA - 13247
Worldwide — Version 51 — November 14, 2011
516814-B21
516830-B21
516826-B21
516824-B21
605835-B21
507610-B21
625031-B21
507616-B21
507614-B21
632494-B21
632492-B21
632506-B21
632504-B21
632502-B21
Page 25
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Core Options
HP Networking
HP InfiniBand
Gigabit Ethernet Adapters
HP NC112T PCI Express Gigabit Server Adapter
HP NC360T PCI-E Dual Port Gigabit Server Adapter
HP NC373F PCI-E Multifunction 1000SX Gigabit Svr Adapter
HP NC373T PCI-E Multifunction Gigabit Server Adapter
HP NC382T PCI Express Dual Port Multifunction Gigabit Server Adapter
HP NC364T PCI-E Quad Port Gigabit Server Adapter
HP NC365T 4-port Ethernet Server Adapter
HP NC375T PCI Express Quad Port Gigabit Server Adapter
10 Gigabit Ethernet Adapters
NOTE: No more than two10GbE I/O devices are supported in a single ProLiant
server.
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each
adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and
cables for fiber-optic environments must be purchased separately.
HP NC522SFP Dual Port 10GbE Gigabit Server Adapter
HP NC523SFP 10Gb 2-port Server Adapter
HP NC550SFP Dual Port 10GbE Server Adapter
HP NC552SFP 10Gb 2-port Ethernet Server Adapter
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information: www.hp.com/go/ProLiantNICs
QLogic InfiniBand 4X QDR PCI-E G2 Dual Port HCA
HP InfiniBand 4X QDR ConnectX-2 PCIe G2 Dual Port HCA
HP InfiniBand 4X DDR ConnectX-2 PCIe G2 Dual Port HCA
HP 10 GbE PCI-e G2 Dual Port Network Interface Card
DA - 13247
Worldwide — Version 51 — November 14, 2011
503746-B21
412648-B21
394793-B21
394791-B21
458492-B21
435508-B21
593722-B21
538696-B21
468332-B21
593717-B21
581201-B21
614203-B21
583211-B21
592520-B21
592521-B21
516937-B21
Page 26
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Additional Options
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use
of an HP approved configurator. Contact your local sales representative for additional information.
HP Lights-Out 100i (LO100i) Advanced including 1yr 24x7 Support Single Server
530521-B21
HP Entry Level
Management
License
NOTE: For additional License Kits please see the Lights-Out 100i QuickSpecs at:
www.hp.com/go/lo100
HP Insight software
HP Insight Control for Linux
HP Insight Control for Linux including 1yr 24x7 Support Electronic License
NOTE: This part number can be purchased as a single license or as multiple licenses
with a single activation key. Customer will receive a license entitlement certificate via
e-mail. The license entitlement certificate must be redeemed online or via fax in order
to obtain the license activation key(s). Includes one year of 24 x 7 HP Software
Technical Support and Update Service.
NOTE: Electronic LTUs are only available through limited points of sales; if not
available, order a printed license entitlement certificate instead.
HP Insight Control for Linux including 1yr 24x7 Support Single Server License
HP Insight Control for Linux Media Kit
NOTE: This optional Media pack DVD contains the ISO image for HP Insight Control
for Linux, HP Systems Insight Manager, HP Insight Control power management, HP
Insight Control virtual machine management, and an integrated installer. Servers must
be acquired separately.
NOTE: This Media pack is optional because the latest ISO image and latest updates
may be downloaded at no cost from: http://www.hp.com/go/ic-linux (click on
Download button).
NOTE: Electronic software is available in all countries except China and Japan. For
China and Japan should order the physical equivalent.
NOTE: Customer will receive a license entitlement certificate, which must be
redeemed online or via fax in order to obtain the license activation key(s). Includes
one year of 24 x 7 HP Software Technical Support Service.
NOTE: For additional License Kits, including electronic licensing options, please see
the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/13019_div/13019_div.html
HP Insight Control server deployment
HP Insight Control Server Deployment including 1yr 24x7 Support Electronic License
HP Insight Control Server Deployment including 1yr 24x7 Support Single Server
License
NOTE: This license allows 1 server to be deployed. Customer will receive a printed
license entitlement certificate via physical shipment. The license entitlement certificate
must be redeemed online or via fax in order to obtain the license activation key(s).
Includes one year of 24 x 7 HP Software Technical Support Service.
NOTE: Electronic software is available in all countries except China and Japan. For
China and Japan should order the physical equivalent.
NOTE: For additional license kits including electronic delivery options, please see the
Insight Rapid Deployment software QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12631_div/12631_div.html
DA - 13247
Worldwide — Version 51 — November 14, 2011
TC213AAE
TC209A
TC208A
T9082AAE
452151-B21
Page 27
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Additional Options
High Performance
Clusters
HP Security - TPM
HP Cluster Management Utility
HP Cluster Management Utility Flexible License
NOTE: This part number can be used to purchase one certificate for multiple licenses
with a single activation key. Each license is for one node (server). Customer will
receive a printed end user license agreement and license entitlement certificate via
physical shipment. The license entitlement certificate must be redeemed online in
order to obtain a license key.
HP Cluster Management Utility Media
NOTE: Order a minimum of one license per cluster to purchase media including
software and documentation, which will be delivered to the customer, and also
licenses CMU management. No license key is delivered or required
NOTE: For additional license kits please see the QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/12612_div/12612_div.html
HP HPC Linux Value Pack
HP High Performance Computing Linux Value Pack 1 Processor Flexible License
NOTE: This part number can be used to purchase one certificate for multiple licenses
with a single activation key. Each license is for one socket (a.k.a. processor).
Customer will receive a printed end user license agreement and license entitlement
certificate via physical shipment. The license entitlement certificate must be redeemed
online in order to obtain a license key.
HP High Performance Computing Linux Value Pack Media Kit
NOTE: This part number can be used to purchase media including software and
documentation, which will be delivered to the customer.
NOTE: For additional license kits please see the QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/13485_div/13485_div.html
HP Trusted Platform Module Option
NOTE: The TPM (Trusted Platform Module) is a microcontroller chip that can securely
store artifacts used to authenticate the server platform. These artifacts can include
passwords, certificates and encryption keys. Windows® BitLocker™ Drive Encryption
(BitLocker) is a data protection feature available in Windows Server® 2008. BitLocker
leverages the enhanced security capabilities of a Trusted Platform Module (TPM)
version 1.2. The TPM works with BitLocker to help protect user data and to ensure that
a server running Windows Server 2008 has not been tampered with while the system
was offline. For more information about TPM, including a white paper, go to:
www.hp.com/go/TPM.
NOTE: ProLiant OS pre-installed units will come with the partition required for TPM
deployment.
NOTE: The TPM key is unique to every TPM deployed server and must be retained.
Misplacing or losing the key could result in data loss.
DA - 13247
Worldwide — Version 51 — November 14, 2011
QL803A
433257-B21
TC293B
TC294A
488069-B21
Page 28
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Additional Options
HP I/O Accelerator
Options
HP 160GB Single Level Cell PCIe ioDrive for ProLiant Servers
NOTE: A low-profile PCI bracket is included for use in low-profile slots.
HP 320GB Multi Level Cell PCIe ioDrive for ProLiant Servers
NOTE: A low-profile PCI bracket is included for use in low-profile slots.
HP 320GB Single Level Cell PCIe ioDrive Duo for ProLiant Servers
HP 640GB Multi Level Cell PCIe ioDrive Duo for ProLiant Servers
HP 1.28TB Multi Level Cell PCIe IO Accelerator
NOTE: When the Full length Graphic card is installed in the system, no additional
PCIe slots is available and only embedded storage controller is available for up to 4
SATA HDDs configuration. For SAS Hard Disk Drive support for the accelerators,
please refer to HP ProLiant DL160se G6
600278-B21
600279-B21
600281-B21
600282-B21
641027-B21
NOTE: For more information on the latest visualization and acceleration qualification
status, please see: http://www.hp.com/go/accelerators
NOTE: For minimum system memory requirements and additional information, please
refer to HP PCIe IO Accelerators for ProLiant Servers QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/13587_div/13587_div.html
(Worldwide)
HP Graphics Options
HP Graphic Card Power Adapter Kit
NOTE: The Graphic Power Adapter Kit can support up to 150 Watts.
NOTE: A full-length graphic card cannot fit in the models which have one of the PCIe
expansion slots already populated with SAS controller.
HP Storage Controllers
NOTE: The addition of storage controllers for internal hard drive use is intended for
use ONLY with the Hot Plug SATA/SAS Model Chassis (P/N 491532-B21). The
addition of a storage controller to the Non-Hot Plug Model Chassis (P/N 491531B21) is supported for external storage ONLY.
NOTE: To utilize the internal only slot, the HP Smart Array P410 Controller must be
selected. The selection of the HP Smart Array P212 Controller for internal and external
connectivity, will require the use of the Full Length Full Height PCI-E x16 slot
NOTE: With the HP Smart Array P410 Controller, the addition of the battery backed
cache upgrade enables BBWC, RAID 5, 5+0, array expansion, logical drive
extension, RAID migration, and stripe size migration. In order to upgrade to RAID 6, at
least 256MB Cache and a Battery is required in addition to the HP Smart Array
Advanced Pack license (P/N 516471-B21).
SAS Controllers
Smart Array P212 Controller
HP Smart Array P212/ZM 1-ports Int/1-ports Ext PCIe x8 SAS Controller
HP Smart Array P212/256 1-ports Int/1-ports Ext PCIe x8 SAS Controller
Smart Array P410 Controller
HP Smart Array P410/256 2-ports Int PCIe x8 SAS Controller
HP Smart Array P410/512 BBWC 2-ports Int PCIe x8 SAS Controller
HP Smart Array P410/1G FBWC 2-ports Int PCIe x8 SAS Controller
Smart Array P411 Controller
HP Smart Array P411/1G FBWC 2-ports Ext PCIe x8 SAS Controller
DA - 13247
Worldwide — Version 51 — November 14, 2011
533955-B21
462828-B21
462834-B21
462862-B21
462864-B21
572532-B21
572531-B21
Page 29
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Additional Options
HP Smart Array P411/512 FBWC 2-ports Ext PCIe x8 SAS Controller
Smart Array P812 Controller
HP Smart Array P812/1G FBWC 2-ports Int/4-ports Ext PCIe x8 SAS Controller
Storage Controllers for use with External Storage Only
HP Smart Array P411/256 2-ports Ext PCIe x8 SAS Controller
HP Smart Array P411/512 BBWC 2-ports Ext PCIe x8 SAS Controller
Optional upgrades
HP 1GB Flash Backed Cache
HP 512MB Flash Backed Write Cache
HP Non-Hot Plug Internal SAS/SATA 4 Port Cable Kit
NOTE: NHP Internal SAS/SATA 4 Port Cable (487734-B21) is required when adding
a Smart Array Controller on Non-Hot Plug SATA/SAS server models.
HP Smart Array Advanced Pack including 1yr 24x7 Technical Support and Updates
Single Server License
HP Smart Array Hot Plug Advance Pack for B110i w/1y 24x7 Supp Physical 1 Svr LTU
NOTE: This part number can be used to purchase a single license or to order multiple
licenses with a single activation key. Customers will receive a license entitlement
certificate via e-mail. The license entitlement certificate must be redeemed online or
via fax in order to obtain the license activation key(s). Include one year of 24x7 HP
Software Technical Support Services.
SAS HBA
HP Modular Smart Array SC08e 2-ports Ext PCIe x8 SAS Host Bus Adapter
NOTE: This is a 2 x4 External Port HBA
NOTE: This is only approved for the HP Storage Works P2000 G3 SAS Modular
Smart Array.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18004.www1.hp.com/products/quickspecs/13651_div/13651_div.html
(SC08Ge HBA)
NOTE: Please see the following QuickSpecs for Technical Specifications and
additional information:
http://h18000.www1.hp.com/products/quickspecs/13203_div/13203_div.html
(Smart Array P212 Controller)
http://h18000.www1.hp.com/products/quickspecs/13201_div/13201_div.html
(Smart Array P410 Controller)
http://h18000.www1.hp.com/products/quickspecs/13202_div/13202_div.html
(Smart Array P411 Controller)
http://h18000.www1.hp.com/products/quickspecs/13558_div/13558_div.html
(Smart Array P812 Controller)
http://h18000.www1.hp.com/products/quickspecs/13200_div/13200_div.html
(Smart Array Advanced Pack)
DA - 13247
Worldwide — Version 51 — November 14, 2011
578229-B21
487204-B21
462830-B21
462832-B21
534562-B21
534916-B21
487734-B21
516471-B21
TC421A
614988-B21
Page 30
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Additional Options
HP InfiniBand
QLogic InfiniBand 4X QDR PCI-E G2 Dual Port HCA
HP InfiniBand 4X DDR PCI-E Dual Port HCA
HP InfiniBand 4X QDR ConnectX-2 PCIe G2 Dual Port HCA
HP InfiniBand 4X DDR ConnectX-2 PCIe G2 Dual Port HCA
HP 10 GbE PCI-e G2 Dual Port Network Interface Card
NOTE: For HPC interconnect adapters please see the HPC Interconnect section of this
QuickSpecs.
HP Backup & Recovery
Software
Data Protector Express
HP Data Protector Express V5.0 for 1 Server E-LTU
HP Data Protector Express V5.0 for 3 Servers E-LTU
HP Data Protector Express V5.0 for 10 Servers E-LTU
HP Basic Upgrade to Data Protector Express V5 for 1 Server E-LTU
NOTE: Only one of these Data Protector Express base products is required. To see
available options: http://www.hp.com/go/dataprotectorexpress
HP Tape Backup
NOTE: For the complete range of tape drives, autoloaders, libraries and media see:
http://www.hp.com/go/tape. For hardware and software compatibility of HP tape
backup products see: http://www.hp.com/go/connect.
NOTE: Connection using the HP P212 SAS Smart Array Controller (462828-B21)
recommended.
Tape Drives
HP DAT 160 SAS Internal Tape Drive
NOTE: For installation into 1U SAS Rack-Mount Kit (AE459B) or 3U SAS Rack-Mount
Kit (AG576B). No peripheral bay available for installation into the server.
HP DAT 320 SAS Internal Tape Drive
NOTE: For installation into 1U SAS Rack-Mount Kit (AE459B) or 3U SAS Rack-Mount
Kit (AG576B). No peripheral bay available for installation into the server.
HP Ultrium 448 SAS Internal Drive
NOTE: Mounts inside the 1U SAS Rack-Mount Kit (AE459A).
HP Ultrium 920 SAS Internal Tape Drive
NOTE: Mounts inside the 1U SAS Rack-Mount Kit (AE459A).
Tape Autoloader
HP 1/8 G2 Ultrium 920 SAS Autoloader
NOTE: Requires HP 1U Tape Autoloader Rack-Mount Kit (AH166A) for rack
installation.
Tape Library
HP MSL2024 Ultrium 920 SAS Tape Library
HP MSL2024 1 LTO-5 Ultrium 3000 SAS Tape Library
DA - 13247
Worldwide — Version 51 — November 14, 2011
583211-B21
448397-B21
592520-B21
592521-B21
516937-B21
TC330AAE
TC331AAE
TC332AAE
TC333AAE
Q1587A
AJ830A
DW085A
EH847A
AH558A
AH559A
BL537A
Page 31
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Additional Options
HP Disk Backup
HP Storage Options
NOTE: For the complete range of D2D Backup Systems see:
http://www.hp.com/go/d2d. For the complete range of RDX drives and media see:
http://www.hp.com/go/rdx. For hardware and software compatibility of HP disk
backup products see: http://www.hp.com/go/connect.
HP D2D Backup Systems with Backup Data Deduplication
HP D2D2502i Backup System
NOTE: 1.5TB of usable network disk backup capacity. Network connected appliance
with connectivity using the iSCSI protocol. If the server requires a hardware iSCSI
initiator, the QLogic QLA4050 Host Bus Adapter is recommended.
HP D2D2504i Backup System
NOTE: 3.0TB of usable network disk backup capacity. Network connected appliance
with connectivity using the iSCSI protocol. If the server requires a hardware iSCSI
initiator, the QLogic QLA4050 Host Bus Adapter is recommended.
USB Removable Media RDX Disk Backup Systems
HP RDX1000 Internal Removable Disk Backup System
HP RDX320 Internal Removable Disk Backup System
NOTE: For installation into 1U USB Rack-Mount Kit (A8007A). No peripheral bay
available for drive installation into the server. 320GB of disk capacity per data
cartridge.
HP RDX500 Internal Removable Disk Backup System
NOTE: For installation into 1U USB Rack-Mount Kit (A8007A). No peripheral bay
available for drive installation into the server. 500GB of disk capacity per data
cartridge.
Fibre Channel HBA
NOTE: The following is a list of all Fibre Channel Host Bus Adapters for Windows and
Linux. For detailed compatibility information please see:
http://h18006.www1.hp.com/storage/saninfrastructure/hba.html
Brocade Fibre Channel HBAs
HP 81B PCIe 8Gb Fibre Channel Single Port Host Bus Adapter
HP 82B PCIe 8Gb Fibre Channel Dual Port Host Bus Adapter
HP 41B PCIe 4Gb Fibre Channel Single Port Host Bus Adapter
HP 42B PCIe 4Gb Fibre Channel Dual Port Host Bus Adapter
Emulex Fibre Channel HBAs
HP 81E 8Gb Single Port PCI-e Fibre Channel Host Bus Adapter
HP 82E 8Gb Dual Port PCI-e Fibre Channel Host Bus Adapter
HP FC2142SR 4Gb PCIe Host Bus Adapter
HP FC2242SR 4Gb PCIe DC Host Bus Adapter
QLogic Fibre Channel HBAs
HP 81Q PCI-e Fibre Channel Host Bus Adapter
HP 82Q 8Gb Dual Port PCI-e Fibre Channel Host Bus Adapter
HP FC1142SR 4Gb PCIe Host Bus Adapter
HP FC1242SR 4Gb PCIe DC Host Bus Adapter
SCSI HBA
DA - 13247
Worldwide — Version 51 — November 14, 2011
EJ001B
EJ002B
BV847A
AJ767A
AJ934A
AP769A
AP770A
AP767A
AP768A
AJ762A
AJ763A
A8002A
A8003A
AK344A
AJ764A
AE311A
AE312A
Page 32
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Additional Options
HP U320e SCSI Dual Channel Host Bus Adapter
NOTE: Recommended Dual Channel Ultra320 SCSI Controller for connecting multidrive MSL tape libraries to ProLiant servers.
Converged Network Adapter
HP CN1000E Dual Port Converged Network Adapter
HP CN1100E Dual Port Converged Network Adapter
HP Disk Storage Systems MSA SAN Storage Arrays
HP MSA70 Array
NOTE: Supports up to 12 SFF drives, and SAS 3 Gb/s and SATA 1.5 Gb/s.
NOTE: Please see the QuickSpecs for additional options and configuration
information at:
http://h18000.www1.hp.com/products/quickspecs/12652_div/12652_div.html
HP Uninterruptible Power HP Rack-mountable UPS
Systems
R5000 Uninterruptible Power System (UPS)
HP R5KVA 3U IEC309-32A High Voltage INTL Uninterruptible Power System
HP R5KVA 3U L630 High Voltage NA/JP Uninterruptible Power System
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/14109_div/14109_div.html
(Worldwide)
HP Rack-Mountable R5500 UPS
HP R5500 6000VA INTL 3U Rackmount Uninterruptible Power System
HP R5500 5000kVA NA/JP 3U Rackmount Uninterruptible Power System
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/11871_div/11871_div.html
(Worldwide)
R7000 Uninterruptible Power System (UPS)
HP R7KVA 4U 50A High Voltage NA/JP Uninterruptible Power System
HP R7KVA 4U IEC-32A High Voltage INTL Uninterruptible Power System
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/14110_div/14110_div.html
(Worldwide)
HP R/T3000 G2 Uninterruptible Power System (UPS)
HP R/T3000 G2 2U L530 Low Voltage NA/JP Uninterruptible Power System
HP R/T3000 G2 2U L620 High Voltage NA/JP Uninterruptible Power System
HP R/T3000 G2 2U Detachable Cord High Voltage INTL Uninterruptible Power
System
DA - 13247
Worldwide — Version 51 — November 14, 2011
AH627A
AW520A
BK835A
418800-B21
AF461A
AF460A
AF416A
AF426A
AF462A
AF463A
AF466A
AF467A
AF468A
Page 33
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Additional Options
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/14058_div/14058_div.html
(Worldwide)
HP R1500 G3 Uninterruptible Power Supply (UPS)
HP R1.5kVA G3 1U NA Uninterruptible Power System
HP R1.5kVA G3 1U JP/TW Uninterruptible Power System
HP R1.5kVA G3 1U INTL Uninterruptible Power System
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/14059_div/14059_div.html
(Worldwide)
AF469A
AF470A
AF471A
NOTE: For additional information on HP Uninterruptable Power Systems please go to:
www.hp.com/servers/rackups.
NOTE: For additional information on sizing your server, please reference:
http://www.upssizer.com
NOTE: Additional HP Uninterruptible Power Systems (UPS) are available for this
equipment. For information on all HP UPSs and accessories please go to
www.hp.com/products/ups (Worldwide)
NOTE: Please see the UPS and PDU cable matrix's on the HP Power Protection and
Management page. Under Power Cords, click on the "HP Power Cord Matrix" link.
That link will list cable descriptions, requirements, and specifications for UPS and PDU
units. Please see the following link: www.hp.com/products/powercords.
HP Power Distribution
Units
HP Monitored Power Distribution Unit: Full Rack Version
HP 8.6kVA 24A Single Input Three Phase NA/JP Monitored Power Distribution Unit
HP 8.3kVA 40A Single Input Single Phase NA/JP Monitored Power Distribution Unit
HP 11kVA 16A Single Input Three Phase INTL Monitored Power Distribution Unit
HP 7.3kVA 32A Single Input Single Phase INTL Monitored Power Distribution Unit
NOTE: Please see the following QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/12118_div/12118_div.html
(Worldwide)
HP Monitored Power Distribution Unit: Half Rack Version
HP 7.3kVA 32A Single Input Single Phase INTL Monitored Power Distribution Unit
HP 4.9kVA 24A Single Input Single Phase NA/JP Monitored Power Distribution Unit
Modular Power Distribution Units 1U/0U (Up to 32 outlets)
HP 3.6kVA 16A High Voltage INTL Modular Power Distribution Unit
HP 4.9kVA 24A High Voltage NA/JP Modular Power Distribution Unit
HP 7.3kVA 32A High Voltage INTL Modular Power Distribution Unit
HP 8.3kVA 40A High Voltage NA/JP Modular Power Distribution Unit
NOTE: Please see the following QuickSpecs for additional options including shorter
jumper cables and country specific power cords:
http://h18000.www1.hp.com/products/quickspecs/11041_div/11041_div.html
(Worldwide)
DA - 13247
Worldwide — Version 51 — November 14, 2011
AF504A
AF506A
AF508A
AF510A
AF915A
AF914A
252663-B24
252663-D72
252663-B31
252663-D73
Page 34
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Additional Options
NOTE: Please see the UPS and PDU cable matrix's on the HP Power Protection and
Management page. Under Power Cords, click on the "HP Power Cord Matrix" link.
That link will list cable descriptions, requirements, and specifications for UPS and PDU
units. Please see the following link: www.hp.com/products/powercords.
HP Intelligent Power
Distribution Units (iPDU)
iPDU Core Units
HP 17.3kVA 24A 415V Three Phase L22-30 NA Core Intelligent Power Distribution
Unit
HP 17.3kVA 24A 415V Three Phase IEC309 NA Core Intelligent Power Distribution
Unit
HP 4.9kVA 24A Single Phase NA/JP Core Intelligent Modular Power Distribution Unit
HP 8.6kVA 24A Three Phase NA/JP Core Intelligent Modular Power Distribution Unit
HP 7.3kVA 32A Single Phase INTL Core Intelligent Modular Power Distribution Unit
HP 11kVA 16A Three Phase INTL Core Intelligent Modular Power Distribution Unit
HP 11.4kVA 16A 415V Three Phase L22-20 NA Core Intelligent Power Distribution
Unit
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13650_div/13650_div.html
(Worldwide)
HP Rack Series
Rack 10000 G2 Series
HP 10642 G2 1200mm deep Shock Rack
HP 10647 G2 1200mm deep Shock Rack
HP 10642 G2 Pallet Universal Rack
HP 10642 G2 Shock Universal Rack
NOTE: For additional information regarding Rack Cabinets, please see the following
URL: http://www.hp.com/go/rackandpower.
DA - 13247
Worldwide — Version 51 — November 14, 2011
AF902A
AF901A
AF520A
AF522A
AF525A
AF526A
AF900A
AF092A
AF094A
AF001A
AF002A
Page 35
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Additional Options
HP Rack Options
HP KVM Switches
HP Server Console 0x2x8 Port Analog Switch
HP Server Console 0x2x16 Port Analog Switch
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/11834_div/11834_div.html
(Worldwide)
HP 1x4 USB/PS2 KVM Console Switch
Rack 10000 G2 series Cabinets
The increasing power of new high-performance processor technology requires
increased cooling efficiency for rack-mounted servers. The 10000 G2 Series Racks
provide enhanced airflow for maximum cooling, allowing these racks to be fully
loaded with servers using the latest processors.
AF616A
AF617A
AF611A
CAUTION: If a third-party rack is used, observe the following additional requirements
to ensure adequate airflow and to prevent damage to the equipment:
Front and rear doors: If your 42U server rack includes closing front and rear doors,
you must allow 5,350 sq cm (830 square inches) of hole evenly distributed from top
to bottom to permit adequate airflow (equivalent to the required 64 percent open
area for ventilation).
Side: The clearance between the installed rack component and the side panels of the
rack must be a minimum of 7 cm (2.75 inches)
CAUTION: Always use blanking panels to fill all remaining empty front panel Uspaces in the rack. This arrangement ensures proper airflow. Using a rack without
blanking panels results in improper cooling that can lead to thermal damage.
HP ProLiant DL160 G6 models have fixed rails which provide support for racks with
round mounting holes and tool-free support for racks with square mounting holes
(including Compaq/HP 7000, 9000, 10000 and HP series), with an adjustment
range of 24" - 36"
NOTE: For additional information regarding Rack Cabinets and Telco Rack support,
please see the following URL: www.hp.com/go/rackandpower.
HP USB and SD Options HP USB-P/S2 Mouse
HP Keyboard (USB) standard 2004
HP Internal USB Cable G6 Kit
NOTE: In order to connect a USB device internally, the internal USB Cable G6 Kit
(536769-B21) must be used.
DA - 13247
Worldwide — Version 51 — November 14, 2011
DC369A
DT528A#ABA
536769-B21
Page 36
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Additional Options
HP Care Pack Services
Hardware Services 4-Hour On-site Service
HP 3 year 4 hour 13x5 ProLiant DL14x and DL16x Hardware Support
HP 3 year 4 hour 24x7 ProLiant DL14x and DL16x Hardware Support
Hardware Services
HP 3 year Next business day ProLiant DL14x and DL16x Hardware Support
HP Install ProLiant DL14x and DL16x Service
NOTE: For more information, customer/resellers can contact:
http://www.hp.com/services/carepack
DA - 13247
Worldwide — Version 51 — November 14, 2011
U9509E
U9510E
U9508E
U9520E
Page 37
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Memory
HP ProLiant DL160 G6 (all models)
NOTE: Memory configurations listed do not apply to "Factory Integrated Models".
Standard Memory
4GB (1x4GB) , 8GB (2 x 4GB) or 24GB(6 x 4GB) depending on model, PC3-10600R-9 Registered RDIMM memory, with ECC.
Maximum Memory
Up to 288GB memory is available with the optional installation of dual-rank PC3L-10600R 16GB Registered RDIMM memory kits.
NOTE: Charts do not represent all possible memory configurations.
DDR3 memory population guidelines
NOTE: For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
www.hp.com/go/ddr3memory-configurator
Some DIMM installation guidelines are summarized below:
For servers with eighteen (18) memory slots:
There are three (3) channels per processor; six (6) channels per server
There are three (3) DIMM slots for each memory channel; eighteen (18) total slots
Memory channel 1 consists of the three (3) DIMMs that are closest to the processor
Memory channel 3 consists of the three (3) DIMMs that are furthest from the processor
DIMM slots that are white should be populated first
Do not mix Unbuffered memory (UDIMMs) with Registered memory (RDIMMs)
Do not install DIMMs if the corresponding processor is not installed
If only one processor is installed in a 2CPU system, only half of the DIMM slots are available
To maximize performance, balance the total memory capacity between all installed processors
It is not required, but it is recommended to load the channels similarly if possible
If any Quad rank DIMMs are installed, all channels are limited to only 2 DIMMs per channel.
You can only install two quad-rank DIMMs per channel
You can only install two UDIMMs per channel; if available, the third slot in the channel must remain empty
Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel
Heaviest load (DIMM with most ranks) within a channel goes furthest from the processor
If mixing DIMM voltage is a requirement, please note that the DIMMs will run at 1.5V since all 1.35V are capable of
supporting 1.5V operations
Low Voltage DIMMs can only be used with Intel Xeon 5600 series processors.
For memory mirroring mode, channel 3 must be unpopulated. Channels 1 and 2 are populated identically
For lock-step mode, channel 3 must be unpopulated. DIMMs in channels 1 and 2 will be installed in pairs. The paired slots
will be 1,4; 2,5; 3;6 on a 3DPC system or 1,4; 2,5; on a 2DPC system
DA - 13247
Worldwide — Version 51 — November 14, 2011
Page 38
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Memory
DIMM slot/capacity/populated speed table
DIMM Type
DIMM Rank
DIMM Capacity
DIMM Native Speed (MHz)
Registered DIMMS (RDIMMs)
Single
Rank
(1R)
4GB
1333
SLOTS THAT CAN BE POPULATED
18 slot servers
18
2GB
1333
Dual Rank (2R)
4GB
8GB
8GB
1333 1066 1333
16GB
1333
Unbuffered with ECC
DIMMs (UDIMMs)
Single
Rank
Quad Rank (4R) (1R)
Dual Rank (2R)
4GB
16GB
1GB
2GB
4GB
1066 1066 1333 1333 1333
18
18
18
18
18
12
12
12
12
12
36
72
144
144
288
48
192
12
24
48
1333
1333
1066
1333
1333
1333
1333
1066
1066
1066
n/a
n/a
n/a
MAXIMUM CAPACITY (GB)
72
POPULATED DIMM SPEED (MHz)
1 DIMM Per Channel
1333
1333 1066 1066
1066/
1333* 1333* 1333* 1066 1333*
800
800
2 DIMM Per Channel
1333**
3 DIMM Per Channel
800
800
800
800
800 800***
n/a
n/a
* Supported with ROM update via ROM Based Setup Utility (RBSU). UDIMM support is on12-slot server.
** 2DPC: LV runs at 1066, Std voltage runs at 1333
*** 3DPC: LV/Std voltage runs at 800
NOTES:
Mixing DIMM speeds is allowed, but the system processor speed rules always override the DIMM capabilities
If you do mix DIMM speeds, the memory bus will default to the minimum clock rate of all DIMMs in the system - even if the
slower DIMM is on the other processor
If you install 1x 1066MHz DIMM in channel 1 and 1x 1333MHz DIMM in channel 2, you still run at 1066MHz
If you install 1x 1066MHz DIMM in channel 1 and 5x 1333MHz DIMMs with 1 DIMM Per Channel (DPC) in each of the other
channels, you run at 1066MHz
If you install 3DPC in one channel (if applicable) and 1DPC in all other channels, you run at 800MHz
95 Watt CPU's are required for 1333MHz DIMM speeds. All other CPU's are capable of up to 1066MHz
References to the above MHz speeds are for the various speeds of DDR3 DIMMs; 1333 refers to DDR3-1333, etc.
DIMM slot and configuration diagrams
Basic memory slot & population diagram
Population order; start with "A" first, "B" second, "C" third, etc.
DA - 13247
Worldwide — Version 51 — November 14, 2011
Page 39
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Memory
18 DIMM SLOTS (9 per CPU node)
Chnl 1
slot #
1
2
3
CPU1
population order
G
D
A
slot #
1
2
3
CPU2
population order
G
D
A
Chnl 1
Chnl 2
4
5
6
H
E
B
4
5
6
H
E
B
Chnl 2
Chnl 3
7
8
9
I
F
C
7
8
9
I
F
C
Chnl 3
Standard memory configuration (1 CPU model)
6GB, consisting of three (3) 2GB dual-rank PC3-10600 RDIMMs
Chnl 1
slot #
1
2
3
CPU1
population order
G; empty
D; empty
A; 2GB DIMM
slot #
1
2
3
CPU2
population order
G; empty
D; empty
A; empty
Chnl 1
Chnl 2
4
5
6
H; empty
E; empty
B; 2GB DIMM
4
5
6
H; empty
E; empty
B; empty
Chnl 2
Chnl 3
7
8
9
I; empty
F; empty
C; 2GB DIMM
7
8
9
I; empty
F; empty
C; empty
Chnl 3
Standard memory plus optional memory (1 CPU model)
54GB, consisting of three (3) 2GB RDIMMs plus six (6) 8GB RDIMMs
3x 2GB dual-rank PC3-10600 RDIMMs
6x 8GB dual-rank PC3-10600 or PC3-8500 RDIMMs
DA - 13247
Worldwide — Version 51 — November 14, 2011
Page 40
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Memory
Chnl 1
slot #
1
2
3
CPU1
population order
G; 8GB DIMM
D; 8GB DIMM
A; 2GB DIMM
slot #
1
2
3
CPU2
population order
G; empty
D; empty
A; empty
Chnl 1
Chnl 2
4
5
6
H; 8GB DIMM
E; 8GB DIMM
B; 2GB DIMM
4
5
6
H; empty
E; empty
B; empty
Chnl 2
Chnl 3
7
8
9
I; 8GB DIMM
F; 8GB DIMM
C; 2GB DIMM
7
8
9
I; empty
F; empty
C; empty
Chnl 3
Standard memory replaced with optional memory (1 CPU model)
RDIMM maximum configuration
96GB, consisting of six (6) 16GB quad-rank PC3-8500R-7 RDIMMs
Chnl 1
slot #
1
2
3
CPU1
population order
G; empty
D; 16GB DIMM
A; 16GB DIMM
slot #
1
2
3
CPU2
population order
G; empty
D; empty
A; empty
Chnl 1
Chnl 2
4
5
6
H; empty
E; 16GB DIMM
B; 16GB DIMM
4
5
6
H; empty
E; empty
B; empty
Chnl 2
Chnl 3
7
8
9
I; empty
F; 16GB DIMM
C; 16GB DIMM
7
8
9
I; empty
F; empty
C; empty
Chnl 3
UDIMM maximum configuration (1 CPU model)
24GB, consisting of six (6) 4GB dual-rank PC3-10600 UDIMMs
DA - 13247
Worldwide — Version 51 — November 14, 2011
Page 41
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Memory
Chnl 1
slot #
1
2
3
CPU1
population order
G; empty
D; 4GB DIMM
A; 4GB DIMM
slot #
1
2
3
CPU2
population order
G; empty
D; empty
A; empty
Chnl 1
Chnl 2
4
5
6
H; empty
E; 4GB DIMM
B; 4GB DIMM
4
5
6
H; empty
E; empty
B; empty
Chnl 2
Chnl 3
7
8
9
I; empty
F; 4GB DIMM
C; 4GB DIMM
7
8
9
I; empty
F; empty
C; empty
Chnl 3
Standard memory replaced with optional memory (2 CPU model)
RDIMM maximum configuration
288GB, consisting of eighteen (18) 16GB dual-rank PC3-8500R-7 RDIMMs DDR3 Registered (RDIMM) memory, operating at
800MHz when populated at 3 DIMMs per Channel in 18 slots.
Chnl 1
slot #
1
2
3
CPU1
population order
G; 16GB DIMM
D; 16GB DIMM
A; 16GB DIMM
slot #
1
2
3
CPU2
population order
G; 16GB DIMM
D; 16GB DIMM
A; 16GB DIMM
Chnl 1
Chnl 2
4
5
6
H; 16GB DIMM
E; 16GB DIMM
B; 16GB DIMM
4
5
6
H; 16GB DIMM
E; 16GB DIMM
B; 16GB DIMM
Chnl 2
Chnl 3
7
8
9
I; 16GB DIMM
F; 16GB DIMM
C; 16GB DIMM
7
8
9
I; 16GB DIMM
F; 16GB DIMM
C; 16GB DIMM
Chnl 3
UDIMM maximum configuration (2 CPU model)
48GB, consisting of twelve (12) 4GB dual-rank PC3-10600E DDR3 Unbuffered (UDIMM) memory, operating at 1066MHz
when populated at 2 DIMMs per Channel in 12 slots.
DA - 13247
Worldwide — Version 51 — November 14, 2011
Page 42
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Memory
Chnl 1
slot #
1
2
3
CPU1
population order
G; empty
D; 4GB DIMM
A; 4GB DIMM
slot #
1
2
3
CPU2
population order
G; empty
D; 4GB DIMM
A; 4GB DIMM
Chnl 1
Chnl 2
4
5
6
H; empty
E; 4GB DIMM
B; 4GB DIMM
4
5
6
H; empty
E; 4GB DIMM
B; 4GB DIMM
Chnl 2
Chnl 3
7
8
9
I; empty
F; 4GB DIMM
C; 4GB DIMM
7
8
9
I; empty
F; 4GB DIMM
C; 4GB DIMM
Chnl 3
NOTE: Capacity references are rounded to the common Gigabyte values.
1GB = 1024MB
2GB = 2048MB
4GB = 4096MB
8GB = 8192MB
16 GB=16384MB
DDR3 memory options part number decoder
DA - 13247
Worldwide — Version 51 — November 14, 2011
Page 43
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Memory
Following are memory options available from HP:
Registered DIMMs (RDIMMs)
HP Memory
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9 Memory
Kit
HP 4GB (1x4GB) Single Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low
Power Memory Kit
HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory
Kit
HP 4GB (1x4GB) Single Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low
Power Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory
Kit
HP 16GB (1x16GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 LP
Memory Kit
HP 16GB (1x16GB) Quad Rank x4 PC3-8500 (DDR3-1066) Registered CAS-7
Memory Kit
Unbuffered with ECC DIMMs (UDIMMs)
HP 1GB (1x1GB) Single Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3L-10600 (DDR3-1333) Unbuffered CAS-9 Low
Power Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed
memory configuration rules and guidelines, please use the Online DDR3 Memory
Configuration Tool: www.hp.com/go/ddr3memory-configurator.
NOTE: Kits described as LP include Low Power DIMMs. For more information on
ProLiant Energy Efficient Features, see: http://www.hp.com/go/proliant-energyefficient
DA - 13247
Worldwide — Version 51 — November 14, 2011
500656-B21
604504-B21
500658-B21
593339-B21
604506-B21
500662-B21
627812-B21
500666-B21
500668-B21
500670-B21
619488-B21
500672-B21
Page 44
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Storage
1-4
A
1-8
A
Four Non-hot plug SATA or four 3.5" Hot-plug
SAS/SATA hard drive bays
Optional DVD-ROM, or DVD RW
Eight Hot-plug SATA/SAS hard drive bays
Optional DVD-ROM, or DVD RW
Drive Support
Removable Media
DVD-ROM
DVD RW
Quantity
Supported
Position
Supported
Up to 1
Up to 1
A
A
Controller
Integrated IDE (ATAPI) (optional)
Integrated IDE (ATAPI) (optional)
Hard Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, and the server backplane) should operate at the
same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
SATA Hot Plug SFF (2.5-inch) Midline (MDL) Drives
Quantity
Position
Supported
Supported
Controller
1TB 3G SATA 7.2K
Up to 8
1-8
HP Smart Array P212 Controller
500GB 3G SATA 7.2K
HP Smart Array P410 Controller
HP Smart Array P812/1G Flash Backed Cache Controller
SATA Hot Plug LFF (3.5-inch) Midline (MDL) Drives
Quantity
Position
Supported
Supported
3TB 3G SATA 7.2K
Up to 4
1-4
2TB 3G SATA 7.2K
1TB 3G SATA 7.2K
500GB 3G SATA 7.2K
SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives
Quantity
Position
Supported
Supported
3TB 3G SATA 7.2K
Up to 4
1-4
2TB 3G SATA 7.2K
1TB 3G SATA 7.2K
500GB 3GSATA 7.2K
Controller
HP Smart Array P212 Controller
HP Smart Array P410 Controller
HP Smart Array P812/1G Flash Backed Cache Controller
Controller
HP Smart Array P212 Controller
HP Smart Array P410 Controller
HP Smart Array P812/1G Flash Backed Cache Controller
SATA Hot Plug LFF (3.5-inch) Entry (ETY) Drives
DA - 13247
Worldwide — Version 51 — November 14, 2011
Page 45
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Storage
250GB 3G SATA 7.2K
160GB 3G SATA 7.2K
Quantity
Supported
Up to 4
Position
Supported
1-8
SATA Hot Plug 2.5" Enterprise Mainstream Solid State Drives
Quantity
Position
Supported
Supported
400GB 3G SATA MLC
Up to 8
1-8
SSD
200GB 3G SATA MLC
SSD
120GB 3G SATA SSD
100GB 3G SATA SSD
60GB 3G SATA SSD
SATA Hot Plug 3.5" Midline (MDL) Solid State Drives
Quantity
Position
Supported
Supported
400GB 3G SATA MLC
Up to 4
1-4
SSD
200GB 3G SATA MLC
SSD
120GB 3G SATA SSD
100GB 3G SATA SSD
SATA Non-Hot Plug LLF ( 3.5-inch) Entry (ETY) Drives
Quantity
Position
Supported
Supported
250GB 3G SATA 7.2K
Up to 4
1-4
160GB 3G SATA 7.2K
SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives
Quantity
Position
Supported
Supported
1TB 6G SAS 7.2K
Up to 8
1-8
500GB 6G SAS 7.2K
SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives
Quantity
Position
Supported
Supported
DA - 13247
Controller
HP Smart Array P212 Controller
HP Smart Array P410 Controller
HP Smart Array P812/1G Flash Backed Cache Controller
Controller
HP Smart Array P212 Controller
HP Smart Array P410 Controller
HP Smart Array P812/1G Flash Backed Cache Controller
Controller
HP Smart Array P212 Controller
HP Smart Array P410 Controller
HP Smart Array P812/1G Flash Backed Cache Controller
Controller
HP Smart Array P212 Controller
HP Smart Array P410 Controller
HP Smart Array P812/1G Flash Backed Cache Controller
Controller
HP Smart Array P212 Controller
HP Smart Array P410 Controller
HP Smart Array P812/1G Flash Backed Cache Controller
Controller
Worldwide — Version 51 — November 14, 2011
Page 46
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Storage
900GB 6G SAS 10K
600GB 6G SAS 10K
300GB 6G SAS 15K
300GB 6G SAS 10K
450GB 6G SAS 7.2K
146GB 6G SAS 15K
72GB 6G SAS 15K
Up to 8
1-8
SAS Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives
Quantity
Position
Supported
Supported
600GB 6G SAS 15K
Up to 4
1-4
450GB 6G SAS 15K
300GB 6G SAS 15K
SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives
Quantity
Position
Supported
Supported
1TB 6G SAS 7.2K
Up to 8
1-8
500GB 6G SAS 7.2K
HP Smart Array P212 Controller
HP Smart Array P410 Controller
HP Smart Array P812/1G Flash Backed Cache Controller
Controller
HP Smart Array P212 Controller
HP Smart Array P410 Controller
HP Smart Array P812/1G Flash Backed Cache Controller
Controller
HP Smart Array P800/512 BBWC Controller
HP Smart Array P212/Zero Memory Controller
HP Smart Array P212/ 256 MB Controller
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB BBWC Controller
HP Smart Array P812/1G Flash Backed Cache Controller
SAS Hot Plug LFF (3.5-inch) Midline (MDL) Drives
Quantity
Position
Supported
Supported
3TB 6G SAS 7.2K
Up to 4
1-4
2TB 6G SAS 7.2K
1TB 6G SAS 7.2K
Controller
HP Smart Array P212 Controller
HP Smart Array P410 Controller
HP Smart Array P812/1G Flash Backed Cache Controller
SAS Non-Hot Plug (3.5-inch) LFF Enterprise (ENT) Drives
Quantity
Position
Supported
Supported
600GB 6G SAS 15K
Up to 4
1-4
450GB 6G SAS 15K
300GB 6G SAS 15K
Controller
HP Smart Array P212 Controller
HP Smart Array P410 Controller
HP Smart Array P812/1G Flash Backed Cache Controller
6G SAS Hot Plug Enterprise Performance Solid State Drives
Quantity
Position
Supported
Supported
Controller
DA - 13247
Worldwide — Version 51 — November 14, 2011
Page 47
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Storage
400GB 6G SAS SLC SFF
SSD
200GB 6G SAS SLC SFF
SSD
Up to 4
1-4
6G SAS Hot Plug Enterprise Mainstream Solid State Drives
Quantity
Position
Supported
Supported
800GB 6G SAS MLC SSD
Up to 4
1-4
SFF
400GB 6G SAS MLC SSD
SFF
200GB 6G SAS MLC SSD
SFF
HP Smart Array P212 Controller
HP Smart Array P410 Controller
HP Smart Array P812/1G Flash Backed Cache Controller
Controller
HP Smart Array P212 Controller
HP Smart Array P410 Controller
HP Smart Array P812/1G Flash Backed Cache Controller
External Storage
70 HP Modular Smart
Array
Quantity
Supported
Up to 8
Position
Supported
External
Host Controller or Adapter
HP Smart Array P212/256MB Controller
HP Smart Array P212/256MB Controller
HP Smart Array P411/256MB Controller
Tape and Disk Backup
NOTE: For the complete range of tape drives, autoloaders, libraries and media, including the internal fitting models, see:
http://www.hp.com/go/tape. For the complete range of D2D Backup Systems see: http://www.hp.com/go/d2d. For the complete
range of RDX drives and media see: http://www.hp.com/go/rdx. For hardware and software compatibility of HP disk and tape
backup products see: http://www.hp.com/go/connect.
Position
Supported
HP SCSI Tape Drives
LTO-1 Ultrium 232
LTO-2 Ultrium 448
LTO-3 Ultrium 920
LTO-3 Ultrium 960
LTO4 Ultrium 1760
LTO-4 Ultrium 1840
DAT 40
DAT 72
DAT 160
1U Rack-Mount Kit
3U Rack-Mount Kit
External
DA - 13247
Controller
HP SC11Xe Ultra320 Single Channel/ PCIe x4 SCSI Host Bus
Adapter
Worldwide — Version 51 — November 14, 2011
Controller/HBA
Option Kit Part
Number
412911-B21
Page 48
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Storage
HP USB Tape Drives
DAT 40
DAT 72
DAT 160
DAT 320
1U USB Rack-Mount Kit
External
USB 2.0 Port
HP SAS Tape Drives
DAT 160
DAT 320
LTO-2 Ultrium 448
LTO-3 Ultrium 920
LTO-4 Ultrium 1760
LTO-4 Ultrium 1840
LTO-5 Ultrium 3000
LTO-5 Ultrium 3280
1U Rack-Mount Kit
3U Rack-Mount Kit
External
HP Smart Array P212/ZM 1-ports Int/1-ports Ext PCIe x8 SAS
Controller
462828-B21
HP SCSI Tape
Autoloaders
DAT 72x10 Autoloader
1/8 G2 Autoloader
External
HP SC11Xe Ultra320 Single Channel/ PCIe x4 SCSI Host Bus
Adapter
412911-B21
HP SCSI Tape Libraries
MSL2024
MSL4048
MSL8096
MSL6000
External
HP U320e SCSI Dual Channel Host Bus Adapter
HP SAS Tape Autoloaders
and Libraries
1/8 G2 Autoloader
MSL2024
MSL4048
MSL8096
External
HP Smart Array P212/ZM 1-ports Int/1-ports Ext PCIe x8 SAS
Controller
HP Fibre Channel Tape
Libraries
MSL2024
MSL4048
MSL8096
MSL6000
External
Please consult the EBS connectivity matrix at:
http://www.hp.com/go/ebs for connectivity information and the
supported Fibre Channel HBAs shown in this QuickSpecs.
DA - 13247
Worldwide — Version 51 — November 14, 2011
N/A
AH627A
462828-B21
Page 49
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Storage
HP USB RDX Removable
Disk Backup System
RDX160
RDX320
RDX500
RDX750
External
HP D2D Backup Systems,
iSCSI
D2D2500i
D2D4000i
Rack Mount
Embedded Network Controller. If the server requires a hardware
iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is
recommended.
HP D2D Backup Systems,
Fibre Channel
D2D4000fc
Rack Mount
Direct server attach is not supported, requires connection via SAN
fabric. See: http://www.hp.com/go/connect
DA - 13247
USB 2.0 port
Worldwide — Version 51 — November 14, 2011
N/A
Page 50
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Power Specifications
HP 750W Common Slot Gold Hot Plug Factory Integrated Power Supply Kit with Backplane
Part Number
535683-B21 Option Kit
Input Voltage Range (Vrms)
100 to 240
Frequency Range (Nominal) (Hz) 50/60
Nominal Input Voltage (Vrms)
100
120
200
208
Maximum Rated Output Wattage
750
750
750
750
Rating
Nominal Input Current (A rms)
8.9
7.4
4.3
4.1
Maximum Rated Input Wattage
857
847
824
825
Rating (Watts)
Maximum Rated VA (Volt-Amp)
894
884
859
859
Efficiency (%)
87.5
88.5
91
91
Power Factor
0.97
Leakage Current (mA)
0.42
0.50
0.83
0.87
Maximum Inrush Current (A peak)
30
Maximum Inrush Current duration
20
(mS)
Maximum British Thermal Unit
2925
2892
2812
2812
Rating (BTU-Hr)
HP 500W Factory Integrated Power Supply Kit
Part Number
515915-B21 Option Kit
Input Voltage Range (Vrms)
100 to 240
Frequency Range (Nominal) (Hz) 47/63
Nominal Input Voltage (Vrms)
100
120
Maximum Rated Output Wattage
500
500
Nominal Input Current (A rms)
5.74
4.99
Maximum Rated Input Wattage
568
568
Rating (Watts)
Maximum Rated VA (Volt-Amp)
574
574
Efficiency (%)
88
88
Power Factor
0.99
0.99
Leakage Current (mA)
0.42
0.50
Maximum Inrush Current (A peak)
Maximum Inrush Current duration
(mS)
Maximum British Thermal Unit
Rating (BTU-Hr)
DA - 13247
220
750
230
750
240
750
3.9
820
3.7
820
3.6
820
854
91.5
854
91.5
854
91.5
0.92
0.96
1.00
2797
2797
2797
200
500
2.86
562
220
500
2.58
556
230
500
2.46
556
240
500
2.36
556
573
89
0.98
0.81
567
90
0.98
0.91
567
90
0.98
0.95
567
90
0.98
1.00
30
20
Worldwide — Version 51 — November 14, 2011
Page 51
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Power Specifications
HP 460W Common Slot Gold Hot Plug Factory Integrated Power Supply Kit with Backplane
Part Number
535684-B21 Option Kit
Input Voltage Range (Vrms)
100 to 240
Frequency Range (Nominal) (Hz) 50/60
Nominal Input Voltage (Vrms)
100
120
200
208
Maximum Rated Output Wattage
460
460
460
460
Nominal Input Current (A rms)
5.5
4.5
2.6
2.5
Maximum Rated Input Wattage
526
520
505
505
Rating (Watts)
Maximum Rated VA (Volt-Amp)
548
542
527
527
Efficiency (%)
87.5
88.5
91
91
Power Factor
0.97
Leakage Current (mA)
0.42
0.50
0.83
0.87
Maximum Inrush Current (A peak)
30
Maximum Inrush Current duration
20
(mS)
Maximum British Thermal Unit
1794
1773
1725
1725
Rating (BTU-Hr)
HP 365W Hot Plug Redundant Power Supply Kit with Backplane
Part Number
532092-B21 Option Kit
Input Voltage Range (Vrms)
100 to 240
Frequency Range (Nominal) (Hz) 50/60
Nominal Input Voltage (Vrms)
100
120
200
Maximum Rated Output Wattage
320
320
360
Nominal Input Current (A rms)
4.15
3.41
2.23
Maximum Rated Input Wattage
412
406
445
Rating (Watts)
Maximum Rated VA (Volt-Amp)
413
407
447
Efficiency (%)
77.4
78.5
80.5
Power Factor
Leakage Current (mA)
0.75
0.75
0.85
Maximum Inrush Current (A peak)
Maximum Inrush Current duration
(mS)
Maximum British Thermal Unit
1354
1334
1462
Rating (BTU-Hr)
DA - 13247
220
460
2.4
503
230
460
2.3
503
240
460
2.2
503
524
91.5
524
91.5
524
91.5
0.92
0.96
1.00
1715
1715
1715
208
360
2.16
445
220
360
2.03
444
230
360
1.94
443
240
360
1.86
443
447
80.6
0.99
0.90
35
20
446
80.7
446
80.8
445
81.0
0.95
0.95
1.00
1462
1459
1456
1456
Worldwide — Version 51 — November 14, 2011
Page 52
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Power Specifications
HP 460W Common Slot Platinum Hot Plug Power Supply Kit with Backplane
605923-B21 Option Kit
Part Number
100 to 240
Input Voltage Range (Vrms)
Frequency Range (Nominal) (Hz) 50/60
Nominal Input Voltage (Vrms)
100
120
200
Maximum Rated Output Wattage
460
460
460
Nominal Input Current (A rms)
5.3
4.3
2.5
Maximum Rated Input Wattage
512
505
493
Rating (Watts)
Maximum Rated VA (Volt-Amp)
526
518
506
Efficiency (%)
89.8
91.2
93.2
Power Factor
Leakage Current (mA)
Maximum Inrush Current (A peak)
Maximum Inrush Current duration
(mS)
Maximum British Thermal Unit
Rating (BTU-Hr)
0.42
0.50
0.83
1747
1722
1683
208
460
2.4
493
220
460
2.3
492
230
460
2.2
492
240
460
2.1
491
506
93.3
505
93.5
505
93.6
504
93.6
0.92
0.96
1.00
1679
1678
1677
0.985
0.87
30
20
1682
NOTE:
To review typical system power ratings use the Active Answers Power Advisor which is available via the online tool located at URL:
www.hp.com/go/proliant-energy-efficient or www.hp.com/go/hppoweradvisor
DA - 13247
Worldwide — Version 51 — November 14, 2011
Page 53
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
System Specifications
Power
ProLiant DL160 G6 Fully Configured
115V/60Hz
220V/50Hz
Fully Loaded System Input Wattage (W)
448
445
Fully Loaded System Input Current (A rms)
3.833
2.046
Fully Loaded System Thermal (BTU- Hr)
1529
1518
Fully Loaded System VA (Volt-Amp)
449
454
System Inrush Current with all power supplies loaded (A)
10.1
10.96
Power cord requirements
Nema 5-15P to IEC320-C13
IEC320-C13 to IEC320-C14
NOTE: Power shown is for a fully configured system consisting of (2) CPU, (8) double-sided DIMMs, (2) HDDs, (1) CD-ROM, and (2)
PCI cards.
Power Cord
AF556A
Server Power Cords
One 6' Highline (IEC-IEC) power cord ships standard
NOTE: HP ProLiant DL servers no longer ship standard with NEMA power cords (163719-002) that
allow connection to 110V US wall outlets in a home or office. ProLiant DL servers are primarily
connected to PDU's in data center racks so they now ship standard with only a PDU power cord
(416151-B21). If a user wishes to power a ProLiant DL server using a 110V receptacle (NEMA-15), the
NEMA power cord (227099-001) must be ordered separately.
If customers require a local power cord, they can check the power cord matrix for the appropriate cord.
Please see the following power cord matrix: http://www.hp.com/go/powercordmatrix.
DA - 13247
Worldwide — Version 51 — November 14, 2011
Page 54
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Technical Specifications
System Unit
Dimensions (H x W x D)
(with bezel)
Weight
(approximate)
Input Requirements
(per power supply)
BTU Rating
Power Specifications
1.70 x 17.64 x 26.85 in (4.32 x 44.80 x 68.20 cm)
Maximum
(all hard drives, power
supplies, and processors
installed)
Minimum
(one hard drive, power
supply, and processor
installed)
Rated Line Voltage
34.00 lb (16.78 kg)
28.00 lb (12.7 kg)
90 to 132 VAC
180 to 264 VAC
Rated Input Current
5. 8 Amps (at 100 VAC) to 2.9 Amps (at 200
VAC)
Rated Input Frequency
47 to 63 Hz
Rated Input Power
570W (at 100 VAC)
565W (at 200 VAC)
Maximum
500W
1940 BTU / hr (at 100
VAC)
1920 BTU/hr (at 200
VAC)
460W
1773 BTU / hr (at 120
VAC)
1715 (at 240 VAC)
750W
2892 BTU / hr (at 120
VAC)
2797 (at 240 VAC)
To review typical system power ratings use the Power Advisor which is
available via the online tool located at URL:
www.hp.com/go/proliant-energy-efficient
Or
www.hp.com/go/hppoweradvisor
- Click on the system of interest. Example: DL160 G6
- Follow the instructions of the next screens.
Power Supply Output
Rated Steady-State Power 500 Watts (at 100 VAC),
(per power supply)
500 Watts (at 200 VAC)
Maximum Peak Power
500Watts (at 100 VAC),
(See Power Specifications 500 Watts (at 200 VAC)
Tables)
System Inlet Temperature Operating
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3050 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change is
10°C/hr (18°F/hr). The upper limit may be
limited by the type and number of options
DA - 13247
Worldwide — Version 51 — November 14, 2011
Page 55
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Technical Specifications
Relative Humidity
(non-condensing)
Altitude
Acoustic Noise
Emissions Classification
(EMC)
DA - 13247
installed.
System performance may be reduced if operating
with a fan fault or above 30°C (86°F).
Non-operating
-30° to 60°C (-22° to 140°F). Maximum rate of
change is 20°C/hr (36°F/hr).
Operating
10 to 90% relative humidity (Rh), 28°C (82.4°F)
maximum wet bulb temperature, noncondensing.
Non-operating
-30° to 60°C (-22° to 140°F). Maximum rate of
change is 20°C/hr (36°F/hr).
Operating
3050 m (10,000 ft). This value may be limited by
the type and number of options installed.
Maximum allowable altitude change rate is 457
m/min (1500 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable
altitude change rate is 457 m/min (1500 ft/min).
Listed are the declared A-Weighted sound power levels (LWAd) and declared
average bystander position A-Weighted sound pressure levels (LpAm) when
the product is operating in a 23°C ambient environment. Noise emissions
were measured in accordance with ISO 7779 (ECMA 74) and declared in
accordance with ISO 9296 (ECMA 109).
Idle
LWAd
6.3B
LpAm
48dBA
Operating
LWAd
6.3B
LpAm
48dBA
FCC Rating
Class A
Normative Standards
CISPR 22; EN55022; EN55024; FCC CFR 47,
Pt 15; ICES-003; CNS13438; GB9254;
K22;K24; EN 61000-3-2; EN 61000-3-3; EN
60950-1; IEC 60950-1
NOTE: Product conformance to cited product specifications is based on
sample (type) testing, evaluation, or assessment. This product or family of
products is eligible to bear the appropriate compliance logos and
statements.
Worldwide — Version 51 — November 14, 2011
Page 56
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Technical Specifications
HP 160GB 3G SATA
7.2K rpm LFF (3.5-inch)
Non-hot Plug Entry 1yr
Warranty Hard Drive
458947-B21
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
(Maximum)
Seek Time (typical reads,
including settling)
Physical Configuration
Operating Temperature
NC362i Integrated Dual
Port Gigabit Server
Adapter
Network Interface
Data Transfer Method
Controller
Network Transfer Rate
Connector
Cable Support
DA - 13247
160,041 MB
1.028 in (2.61 cm)
4.0 in (10.16 cm)
5.787 in (147.0 mm)
SATA ATA
1.5Gb/s
Single Track
Average
Full-Stroke
0.9 ms
9.0 ms
17.8 ms
Rotational Speed
7,200 rpm
Bytes/Sector
512
Logical Blocks
312,581,808
41° to 131° F (5° to 55° C)
Integrated 10/100/1000BASE-T Transceiver
Combines a triple-speed IEEE 802.3TM - Compliant Media Access
Controller (MAC) with a triple-speed Ethernet transceiver.
Compliant to x1 PCIe Specification
Intel® 82576
10Base-T (Half-Duplex)
10 Mb/s
10Base-T (Full-Duplex)
20 Mb/s
100Base-TX (Half-Duplex) 100 Mb/s
100Base-TX (Full-Duplex) 200 Mb/s
1000Base-TX (Half and
2000Mb/s
Full-Duplex)
RJ-45 connector
Performs all the physical layer functions for 10BASE-T, 100BASE-T, and
1000BASE-T Ethemet on standard Category 5 UTP
Worldwide — Version 51 — November 14, 2011
Page 57
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Technical Specifications
Smart Array P410/410i
Controller
Environment-friendly
Products and Approach
Disk Drive and Enclosure 6Gb/s SAS (Serial Attached SCSI)
Interface
3Gb/s SATA (Serial ATA)
2 internal (Mini-SAS) x8 wide port connectors
SAS Connectors
DDR2-533MHz with 40 or 72-bit wide bus provides up to 4.2 GB/s
Cache Memory Speed
maximum bandwidth.
x8 2.5G PCIe 2.0 provides 2GB/s maximum bandwidth
Server Interface
x8 6Gb/s SAS provides 4.8GB/s maximum bandwidth
SAS Speed
40-bit 256MB ECC protected cache (72-bit 512MB BBWC module
Cache Memory
upgrades available); transportable with battery-backed upgrade
Logical Drives Supported Up to 64 logical drives
Host Memory Addressing 64-bit, supporting greater than 4GB server memory space
RAID Support
RAID 6, 6+0 (Advanced Data Guarding)
NOTE: The minimum of 256 MB cache, battery kit, and Smart Array
Advanced Pack License Key upgrade is required to enable RAID 6, 6+0
RAID 5, 5+0 (Distributed Data Guarding)
NOTE: The 256 MB is required to enable RAID 5, 5+0 support of the Smart
Array P410
RAID 1+0 (Striping & Mirroring)
RAID 0 (Striping)
End-of-life Management
and Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go to:
http://www.hp.com/go/green. To recycle your product, please go to:
http://www.hp.com/go/green or contact your nearest HP sales office.
Products returned to HP will be recycled, recovered or disposed of in a
responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the Hewlett
Packard web site at: http://www.hp.com/go/green. These instructions may
be used by recyclers and other WEEE treatment facilities as well as HP OEM
customers who integrate and re-sell HP equipment.
© Copyright 2011 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel, the Intel logo, Xeon and Xeon Inside are
trademarks of Intel Corporation in the U.S. and other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
DA - 13247
Worldwide — Version 51 — November 14, 2011
Page 58