PoE Repeater over
2-wire (Master)
H/W Version: 1
The POT system, one master & one slave units, provide
a long-reach Ethernet extension with remote Powerover-Ethernet (PoE) capability over a 2-wire line.
Connection with a Class 0 PD device, the distance
of two-wire 24AWG cables can be up to 400 meters
when using a 48Watt high power PoE Switch,
FSW-0513/0543. Users may select a fixed data rate for
different copper line ranging. The maximum data rate
can be up to 60 Mbps full duplex for 2-wire line.
The POT master unit is powered by the local PoE
Ethernet network, and transmits both the data and
power to the remote slave unit over 2-wire cable. The
remote unit regenerates the power and provides the
PoE capability to power up the remote PD device up
to 15 watts when connecting to 48Watt High Power
Switch, FSW-0513. The POT M/S supports the indoor &
outdoor models with wall-mount feature.
Equipped with dip switches, the 2-wire line speed
can be configured to meet different line gauges and
distances. A POT pair offers a cost effective solution
for remote power applications such as LAN-to-LAN
connectivity, Video Streaming, FTTB, and MDU/MTU
over single twisted line.
1. LED Indicator
2. Dip Switch
3. RJ-11 Out
4. RJ-45 In
Key Features
- Two-wire cables are used to connect 100Mbps Fast
Ethernet PoE devices
- Maximum distance up to 500 meters for 24 AWG
- Maximum data rate up to 60Mbps full duplex
- Remote PoE capability for PD devices of WiFi AP, IP
camera, IP telephones
- Up to 15 Watts for remote PoE, Depending on PSE
- Easy installation by indoor & outdoor different
- Dip Switches for 2-wire line rate settings
- Auto MDIX for 10/100 Base-Tx Ethernet LAN Ports
- Low-Latency for Video/Voice/Data applications
Works Well With
High-power PoE Injector
4-Port High Power PoE Switch
www.level1.com I one world_one brand_one level_
Ethernet Switches
Technical Specifications
Line Interface
LED Indicator:
Data Rate: 60/60 Mbps
Power: Green On- indicates power is on and normal
Power: 48V
LAN: Green On- indicates Ethernet LAN port is in connection
RJ-11 Connector x 1
LAN Interface
Line: Green On- indicates 2-wire line is in connection
Auto-Detection for 10/100 Base-Tx and Half / Full duplex
Full compatible with IEEE 802.3 / IEEE802.3u
M/S: Green On-indicates as 2-wire Slave unit
Automatic MDIX Function
RJ-45 Connector x 1
Physical Dimension ( L x W x H ):
120mm x 90mm x 28mm
Output Voltage within 44~57V
Operating Environment:
Safety-Extra-Low-Voltage (SELV) Compliant
Humidity: 5% ~95% non-condensing
Maximum output power 15 Watts
Temperature: 0~50°C
Flashing- indicates Ethernet LAN data activates
Flashing- indicates 2-wire line is in line handshaking
Green Off- indicates as 2-wire Master unit
Regulatory Compliance:
FCC Rules Part 15
Product Diagram
Ethernet Cable (RJ-45)
PoE (Power + Data)
RJ-11 Phone Line (Power + Data)
Indoor to Indoor Solution
Non-PoE Switch
up to 400m
for 2 wire
PoE PD devices
Indoor to Indoor Solution
Non-PoE Switch
up to 300m
for 2 wire
PoE PD devices
Note: These distances are typical results when used with 24AWG RJ-11 Cable
Order Information
POT-0100: PoE Repeater over 2-wire (Master)
Package Contents
POT-0100 x 1, User Manual x 1
All mentioned brand names are registered trademarks and property of their owners. Technical specifications are subject to change without notice.
© Copyright Digital Data Communications GmbH. All Rights Reserved.