2-Port
Outdoor PoE Repeater
POR-1102
H/W Version: 1
Extend the reach of your PoE devices
Applications
POR-1102 is the perfect accessory to increase your
Power over Ethernet network performance. As a
2-port repeater, it’s now easier to add more devices to
the network for greater deployment flexibility.
POR-1100 is the perfect solution for taking Ethernet
to areas such as roof tops, factory floors, airports, and
large warehouses.
Simple yet durable, no software required
POR-1102 is IP66-compliant meaning it is
weatherproof from snow, rain, typhoons, desert
heat, etc. This PoE Repeater is up to the challenge for
deployment in any harsh weather condition!
As a PoE Repeater, POR-1102 receives all power from
the Power Sending Equipment (PSE), for example,
a PoE switch. This means that POR-1102 uses no
external power supply, making it the most flexible
option for system integrators looking for an easy,
affordable solution to increase the distance to the
attached devices.
IP66-compliant
POI-1102 can also work together with LevelOne’s
high-power PoE injector, POI-4000. This can extend
Ethernet connectivity an additional 100 meters for
high power PD devices, such as 18 W IP Cameras or
other devices that require power greater than 15.4 W.
1
Key Features
- Extends Cat.5 cable installations to beyond 100
meters
- 2-Port Ethernet Power Sourcing Equipment
(PSE)
- Forwards Power over Ethernet (PoE) to remote
device
- No Power required
- Fully transparent-no restrictions to network traffic
- Supports all network devices
- IP66 weatherproof design
2
2
1. RJ45 In
2. RJ45 Out
Works Well With
POI-4000
High-power PoE Injector
POR-0102
2-port PoE Repeater
www.level1.com I one world_one brand_one level_
PoE PD/PSE
Technical Specification
Ethernet Interface:
IEEE 802.3x, Auto-Detection for 10/100BASE-T and full/half
duplex
Automatic MDIX function
PoE Input Port: RJ-45 Connector x 1
PoE Output Port: RJ-45 Connector x 2
Port-based VLAN function for LAN ports
Power:
IEEE 802.3af-Compliant with voltage within 44~57 Volt
Maximum Power Dissipation: 2.5 Watts
Regulations & Approvals:
FCC Rules Part 15
CE
Physical Dimension: (L x W x H)
180mm x 165mm x 95mm
Operating Environment:
Humidity: 5% to 95% non-condensing
Temperature:0~50 °C
Product Diagram
Ethernet Cable (RJ-45)
Non-PoE Switch
PoE
POI-4000
100m
POR-1102
100m
POR-1100
100m
POR-1100
100m
POR-1100
100m
PD 1
100m
PD 2
PD 1 + PD 2 ≤ 16.5w
FCS-5011
FCS-5011
Note: These distances are typical results when used with 18~19Ω 24 AWG Cat.5 Cable
Order Information
POR-1102: 2-Port Outdoor PoE Repeater
Package Contents
POR-1102 x 1, QIG x 1, Mounting Kit x 1
All mentioned brand names are registered trademarks and property of their owners. Technical specifications are subject to change without notice.
© Copyright Digital Data Communications GmbH. All Rights Reserved.
V1.0