ProSafe® 8-port Gigabit PoE
Smart Switch with 2 Gigabit Fiber SFP
GS110TP
Data Sheet
10 0 0
Mbps
Small, Yet Powerful Gigabit Smart Switch Packed with Advanced Features
Joining NETGEAR’s ProSafe® family of Smart Switches with high performance and cost efficiency,
this 10-port Gigabit Smart Switch is packed with powerful features capable of enhancing any type
of business network. The GS110TP is designed for customers who need a low port density solution
with the combination of Gigabit speed and PoE capability. The GS110TP comes with 8 dedicated
10/100/1000 Mbps copper ports to connect to your end devices and two additional Gigabit Fiber
ports for uplinks with greater distance. With PoE capability on all 8 copper ports, the GS110TP can
automatically detect PoE on the end devices and dynamically manage power assignments and
priority. It is capable of delivering up to 15.4W of power to devices such as wireless access points,
IP phones and IP cameras, providing flexibility and ease of deployment to your network.
The GS110TP comes with a comprehensive set of features, such as enhanced VLAN and QoS,
access control lists (ACL), 802.1x port authentication, rate limiting and IGMP snooping and many
more, to provide businesses with networks that are geared for growth while ensuring performance
and reliability.
With the fanless design and compact form factor, the GS110TP offers quiet operation and is suitable for deployments in any type of environment, especially the ones which are sensitive to noise.
Like all NETGEAR ProSafe Smart Switches, the GS110TP is backed by the NETGEAR ProSafe
Lifetime Warranty†, and 1-Year ProSupport 24x7 Advanced Technical Support*.
PoE Power Management
GS110TP offers useful PoE power management features to help you better control and monitor your power resource. The PoE timer can help turn off the PoE ports during certain times of
the day so that your network can be more secure as well as energy efficient. It can also set
prioritization on power usage so that specified ports are always guaranteed to get the power
first if total power required exceeds the total power budget. The power will be assigned to the
PoE ports dynamically depending on the actual power need of the individual network devices so
that you don’t need to do any calculation. The PoE LED on the front panel will light up if the PoE
usage is reaching the threshold, meaning that insufficient PoE resource is left for powering up
additional ports.
NETGEAR Green
• Up to 70% power savings compared to the non-Green version
• Auto power-down mode saves energy when port is not in use
• Cable length detection reduces power usage when network cable is shorter than 10 meters
Advanced Quality of Service (QoS)
Priority queuing ensures high-priority traffic gets delivered efficiently, even during congestion
from high-traffic bursts. Companies implementing network telephony or video conferencing, for
example, need to be able to prioritize such voice and video traffic and other real-time applications
over less latency-sensitive traffic to ensure reliability and quality. The ability to prioritize traffic
ensures quality of latency-sensitive services and applications despite increasing traffic loads. The
GS110TP provides an extensive set of QoS features:
• 802.1p-based prioritization
• Layer 3-based prioritization
• Rate limiting
Advanced Security
The GS110TP provides more robust security. This includes:
• 802.1x for authentication
• ACL filtering to permit or deny traffic based on MAC or IP addresses
24 / 7
TECHNICAL
S U P P O R T*
1-888-NETGEAR (638-4327)
Email: info@NETGEAR.com
ProSafe® 8-port Gigabit PoE Smart Switch with 2 Gigabit Fiber SFP
GS110TP
Usability Enhancements
The GS110TP is a powerful switch, yet very ease to manage. It comes with many usability enhancements to help customers fully utilize the features for a more optimized and secure network. For
example, the Auto Voice VLAN and Auto Video features will assist customers to easily set up VoIP or
IP surveillance networks with a couple of simple steps. You don’t need to be an IT professional to set
up VoIP or IP surveillance. Security is critical for business networks. However, not everyone knows
how to set up a secure network. The ACL Wizards on the GS110TP will guide even naïve users
through the setup of access control and address filtering.
Centralized Management via the New Smart Control Center
With multiple switches in the network, managing configurations on each switch and upgrading
firmware becomes a big challenge. NETGEAR’s Smart Control Center that comes with the GS110TP
and many other Smart switch models can help make this task much easier and simpler. It can
perform discovery of the switches on your network, push configuration and firmware updates to
multiple selected switches at once, and can even schedule when the tasks should be performed.
ProSafe 8-port Gigabit
PoE Smart Switch
(GS110TP)
Internet
Connects to
broadband modem
ProSafe 8-port Gigabit VPN
Firewall (FVS318G)
IP camera
Connects to laptops
with internal Wireless-N
or Wireless-N adapters
ProSafe Dual Band
Wireless-N Access Point
(WNDAP350)
ReadyNAS NVX
(RNDX4210)
Key
VLAN 1
VLAN 2
VLAN 3
Technical Specifications
•Network Protocol and Standards
Compatibility
––IEEE 802.3i 10BASE-T
––IEEE 802.3u 100BASE-TX
––IEEE 802.3ab 1000BASE-T
––IEEE 802.3z 1000BASE-X
––IEEE 802.3x full-duplex flow control
––IEEE 802.3af (DTE Power Via MDI)
•Power Supply
––Power consumption: 59.3W maximum
•Network Ports
––Eight (8) 10/100/1000 Mbps autosensing + 2 Gigabit SFP uplinks
•Physical Specifications
––Dimensions: (W x D x H):
236 x 101.6 x 27 mm (9.3 x 4 x 1.07 in)
––Weight: 0.7 kg (1.55 lb)
IP phone
Connects to PCs
with Gigabit
Ethernet PCI
Adapter (GA311)
•Performance Specifications
––Forwarding modes: Store-and-forward
––Bandwidth: 20 Gbps full duplex
––Network latency: Less than 4 μs for
64-byte frames in store-and-forward
mode for 1000 Mbps to 1000 Mbps
transmission
––Buffer memory: 512 KB embedded
memory per unit
––Address database size: 4k media
access control (MAC) addresses per
system
––Mean time between failures (MTBF):
157,004 hours (~18 years)
––Acoustic noise: 0 dB
•Electromagnetic Emissions
––CE mark, commercial
––FCC Part 15 Class B
––VCCI Class B
––C-Tick
•Environmental Specifications
––Operating temperature: 32° to 122° F
(0° to 50° C)
––Storage temperature: -4° to 158° F
(-20° to 70° C)
––Operating humidity: 90% maximum
relative humidity, non-condensing
––Storage humidity: 95% maximum
relative humidity, non-condensing
––Operating altitude: 10,000 ft
(3,000 m) maximum
––Storage altitude: 10,000 ft
(3,000 m) maximum
•Status LEDs
––Per RJ45 port: Link/activity, speed, PoE
status
––Per SFP port: Link/speed
––Per device: Power, PoE Max
•Power Adapter
––48V, 1.25A external power adapter,
localized to country of sale
ProSafe® 8-port Gigabit PoE Smart Switch with 2 Gigabit Fiber SFP
•Electromagnetic Immunity
––EN 55024
•Safety
––CE mark, commercial
––cUL IEC 950/EN 60950
––CB
•Administrative Switch Management
––IEEE 802.1Q static VLAN (64 groups,
static)
––Protected ports
––IEEE 802.1p Class of Service (CoS)
––Port-based QoS
––DSCP-based QoS
––DiffServ
––IEEE 802.3ad Link Aggregation
(manual or LACP)
––IEEE 802.1w Rapid Spanning Tree
Protocol (RSTP)
––IEEE 802.1s Multiple Spanning Trees
Protocol (MSTP)
––IEEE 802.1ab Link Layer Discovery
Protocol (LLDP)
––LLDP-MED
––SNMP v1, v2c, v3
––RFC 1213 MIB II
––RFC 1643 Ethernet Interface MIB
––RFC 1493 Bridge MIB
––RMON group 1, 2, 3, 9
––Auto voice VLAN
––DHCP Filtering
––Auto denial-of-service (DoS) protection
––HTTP and HTTPS
––Ping and traceroute
––Green features: Power saving by cable
length (<10 m)
––Power saving when link down
––RFC 2131 DHCP client
––DHCP filtering
––IEEE 802.1x with Guest VLAN
––Jumbo frame support
––Port-based security by locked MAC
addresses
––MAC and IP-based ACL
––Storm control for broadcast, multicast
and unknown unicast packets
––IGMP snooping v1/v2
––Port-based egress rate limiting
––SNTP
––Port mirroring support (many-to-one)
––Web-based configuration
––Configuration backup/restore
––Password access control
––TACACS+ and RADIUS support
––Syslog
––Firmware upgradeable
––PoE (46 Watts of power budget)
NETGEAR Related Products
Network
––ProSafe® 802.11g Wireless Access Point
(WG302)
––ProSafe® 802.11g Wireless Access
Point (WG103)
––ProSafe® 802.11n Dual Band Wireless
Access Point (WNDAP330)
Desktops
––Gigabit Ethernet PCI Adapter (GA311)
GS110TP
System Requirements
––Category 5 network cables
––Network card for each PC
––Network software (e.g., Microsoft
Windows®)
––Web browser (e.g., Internet Explorer®
5.0 or higher, Netscape® 6.0 or higher)
Warranty and Support
––ProSafe Lifetime Warranty†
––ProSupport 24x7 Advanced Technical
Support, 1 year (included)*
ProSupport™ Service Packs
Available
––XPressHW, Category 1: PRR0331
(3-year next-business day hardware
replacement contract)
––OnCall 24x7, Category 1: PMB0331
(3-year Advanced Technical Support
contract, including Remote Diagnostics
performed by our technical experts for
prompt resolution of technical issues,
and next-business day hardware
replacement)
Package Contents
––ProSafe® 8-port Gigabit PoE Smart
Switch with 2 Gigabit Fiber SFP
(GS110TP)
––AC adapter
––Rubber footpads
––Wall-mount kit
––Resource CD
––Installation guide
Ordering Information
––Australia & Japan: GS110TP-100AJS
––Europe General: GS110TP-100EUS
––North America: GS110TP-100NAS
© 2012 NETGEAR, Inc. NETGEAR, the NETGEAR Logo, Connect with Innovation, ProSafe and ProSupport are trademarks of NETGEAR, Inc. in
the United States and/or other countries. Other brand names mentioned herein are for identification purposes only and may be trademarks of
their respective holder(s). Information is subject to change without notice. All rights reserved.
350 E. Plumeria Drive
San Jose, CA 95134-1911
1-888-NETGEAR (638-4327)
E-mail: info@NETGEAR.com
www.NETGEAR.com
* 1-year 24x7 Advanced Technical Support includes Remote Diagnostics performed by our technical experts for prompt resolution
of technical issues.
†
Lifetime warranty for product purchased after 05/01/2007. For product purchased before 05/01/2007, warranty is 3 years.
D-GS110TP-1