Netgear GSM7252PS-100EUS network switch

ProSafe® 24- and 48-port
Stackable Gigabit PoE L2+ Managed Switches
GSM7228PS, GSM7252PS
Data Sheet
NETGEAR Stackable, PoE Managed Gigabit Switches GSM7228PS and GSM7252PS allow the most flexible and easy-to-deploy
Gigabit Power over Ethernet infrastructure. All the 24 and 48 ports of 10/100/1000 Mbps interfaces support 802.3af PoE standard
with a comfortable 384 Watts total budget. The first 8 ports support high power 802.3at PoE+, with up to 30 Watts per port. Four (SFP)
Gigabit interfaces provide optional fiber connectivity for longer reach Gigabit Ethernet requirements. Two built-in 10 Gigabit Ethernet
SFP+ interfaces on the front, reserved for network uplinks or servers and storage devices, and two 10 Gigabit module bays on the rear,
permitting both uplinks and local/distant stacking, provide versatile 10 Gigabit deployment possibilities.
Enterprise-class L2+
Combining superior resiliency, enterprise-class security and non-blocking performance, NETGEAR Stackable PoE Managed Gigabit
Switches GSM7228PS and GSM7252PS offer a full set of Layer 2 management features, as well as Layer 2+ (Layer 3 lite – IPv4 routing)
with unsurpassed affordability. Together with VLAN routing, voice-class prioritization, and chassis-like stack even with local or distant
non-PoE Layer 3 Gigabit Managed Switches GSM7328S / GSM7352S / GSM7328FS, the GSM7228PS and GSM7252PS series can be
deployed at enterprise edge, remote branch offices and closer to the core of small and medium businesses’ growing networks.
L3 Scalability
Layer 3 license upgrades GSM7228PL and GSM7252PL unlock IPv4/IPv6 dynamic routing capabilities of GSM7228PS and GSM7252PS.
Designed for Enterprise networks and core/aggregation levels of SMB networks, L3 upgraded GSM7228PS and GSM7252PS provide
advanced routing protocols such as OSPF, VRRP and multicast for converged applications.
High Availability
NETGEAR Stackable, PoE Managed Gigabit Switches GSM7228PS and GSM7252PS come with a removable power module for the main
power supply. In the event of a power supply failure, the switch can immediately shift to an external RPS device while the internal power
module is replaced for 100% uptime. Like all NETGEAR ProSafe Managed Switches, the GSM7228PS and GSM7252PS are backed by the
NETGEAR ProSafe Lifetime Warranty.
8 First Gigabit
Ports are PoE+
1
All other Gigabit
Ports are PoE
2
1
3
2 built-in 10 GE SFP+
4
4
3
1
4 Ports Combo SFP
2
2
4
Built-in
10 Gigabit
Ports
Replaceable
modular
power supply
Console
port
2 module bays for 10 GE options
modules (stacking or uplinks)
RPS connector
(remove screws)
Layer 3 license upgrade, see details on page 14:
24 / 7
•
IPv4/IPv6 RIP, OSPF, VRRP
•
IPv4/IPv6 Multicast routing
•
IPv6 L2, L3, L4 ACL and QoS
•
GSM7328S/GSM7352S feature set elevation
TECHNICAL
S U P P O R T*
1-888-NETGEAR (638-4327)
Email: info@NETGEAR.com
*
-1-
ProSafe ® 24- and 48-port Stackable Gigabit PoE L2+ Managed Switches
GSM7228PS, GSM7252PS
Features at a Glance
GSM7228PS
Hardware Main Features
24/48-port Gigabit 802.3af PoE
GSM7252PS
Benefits
• Gigabit performance for growing networks
• Comfortable 384W budget for IP Phones, APs, IP cameras, etc.
8 first ports 802.3at PoE+ (30W)
• Ready for high-powered new PoE+ devices
4 shared SFP (Gigabit fiber) interfaces
• Fiber SX/LX connectivity for longer reach requirements
2 built-in 10 Gigabit SFP+ (front)
• Dramatically lower the cost of 10 Gigabit deployments
• Accept Fast Ethernet 100FX SFP
• Flexible 10 GE network uplinks, server/storage
• Accept short direct-attach SFP+ copper cables
2 additional 10 Gigabit module bays (rear)
Physical stacking up to 8 switches/384 ports
• For stacking or other 10 GE network uplinks
• Chassis-like unique GUI/CLI
• High speed 12 x 4 = 48 GE overall stacking performance
• Single IP address management
• Hot swappable, automatic unit replacement
• Distributed redundant trunking, any-to-any port mirroring
Stack also with non-PoE GSM73xxS series
Removable power supply + RPS option
• Versatile local or distant L3 10 Gigabit deployments with GSM7328S, GSM7352S and GSM7328FS
• 100% uptime even in case of power supply failure
• APS525W spare power supply can be replaced without any service interruption when used with one external RPS
Software Main Features
Benefits
Layer 2+ (Layer 3 lite – IPv4 routing)
• Unsurpassed affordability for edge VLAN/subnet routing
Multiple STP, 802.3ad LACP, RPS support
• Superior resiliency for highly available networks
Fabric (24/48-port) 144 / 192 Gbps
Performance 107.1 / 285.7 Mpps
• Non-blocking performance for critical applications
L2, L3, L4 ACL (access control lists)
• Ideal for large voice/video deployments
• Enterprise-class security
• Network protection based on user profile
• Network protection based on trusted application
L2, L3, L4 QoS (8 priority queues, DiffServ)
• Voice-class prioritization
• Traffic prioritization based on user profile or application
• More queues for VoIP, video & critical applications
IGMP snooping v2, v3
IGMP proxy, IGMP querier
8,000 MAC – 1,024 VLANs – 1,024 MC groups
64 trunks 8-port each – DHCP server/relay
224 IP routes – 128 IP interfaces
L3 License Upgrade Features
• Easier multicast for IP surveillance, IPTV
• Multicast traffic reaches only the interested receivers, even without a dedicated external multicast router
• Deployable at enterprise edge, remote branch offices or closer to the core of SMB networks
Benefits
Layer 3 - IPv4 (RIPv1/v2, OSPFv1/v2, VRRP)
Layer 3 - IPv6 (RIPng, OSPFv3)
• Advanced routing capabilities for converged applications
Multicast routing - IPv4/IPv6
Multicast L2 - IPv6 (MLD)
• Advanced routing of multicast streams (PIM, sparse, dense)
IPv6 L2, L3, L3 ACL (access control lists)
IPv6 L2, L3, L4 QoS (8 priority queues)
• Enforces advanced security for IPv6 networks (user profile, applications)
• Ideal for IPv4 /IPv6 transitioning networks
• Simplify IPTV & video large deployments
• IPv6 traffic prioritization (user profile, VoIP, video & critical applications)
-2-
ProSafe ® 24- and 48-port Stackable Gigabit PoE L2+ Managed Switches
GSM7228PS, GSM7252PS
Target Applications
Unified PoE and Non-PoE Edge in Large Networks
GE
10 GE
Core
Non PoE
PoE
GSM72xxPS/GSM73xxS
Stack for access
GSM72xxPS/GSM73xxS Stack for Access
Stacking with L3 Gigabit GSM7328S, GSM7352S and GSM7328FS Managed Switches, the GSM7228PS and GSM7252PS add Power
over Ethernet access for LAN telephony, wireless access points or IP cameras in a cost-effective solution: the built-in 10 Gigabit SFP+
ports on the front authorize high performance distributed trunks to the core and management is simplified. In this configuration,
each stack acts as a single routing switch, with only one GUI/CLI and multiple distributed link aggregations.
SMB Network Deployments
GE
10GE
ReadyNAS 4200
WNDAP350
Virtualized
servers
GSM72xxPS/GSM73xxS Combining Local Stack (same location, same rack in four locations) and Distant Stack Using 10 Gigabit Fiber
GSM72xxPS/GSM73xxS Unique Stack
With GSM7328S, GSM7352S and GSM7328FS Managed Switches, the GSM7228PS and GSM7252PS simplify and lower the cost of
medium-sized 10 Gigabit deployments. In this configuration, 8 stacked switches build a 384 Gigabit ports network with 16 available
10 Gigabit ports for servers and high-end storage. The hardware stacking dual-ring topology provides one unique CLI/GUI platform,
simple management, network and servers/storage perfect resiliency, as well as intelligent load balancing.
-3-
ProSafe ® 24- and 48-port Stackable Gigabit PoE L2+ Managed Switches
GSM7228PS, GSM7252PS
NETGEAR Hardware Stacking
Local and Distant Stack Topology
Local Stack Topology
AX742
24 Gbps Stacking Kit
When the switches are deployed in the same rack, one AX742
kit per switch is required for dual-ring topology, providing higher
resiliency and intelligent load balancing.
Each ring speed is 12 Gbps half duplex (24 Gbps full duplex).
+
Dual ring overall speed is 24 Gbps half duplex (48 Gbps full
duplex).
• Each AX742 kit contains 2 stacking modules+ 1 stacking cable
• One AX742 kit per switch recommended for full 48 Gbps bandwidth
and complete redundancy
Distant Stack Topology
When the switches are deployed in several locations, two AX743
SFP+ host modules are required per switch, with the SFP+ optics
(AXM761, AXM762 or AXM763) for this hardware dual-ring
topology, providing highest resiliency and intelligent load balancing.
Each ring speed is 10 Gbps half duplex (20 Gbps full duplex).
Dual ring overall speed is 20 Gbps half duplex (40 Gbps full duplex).
Local and distant stack can be combined for maximum flexibility
(example: “SMB Network Deployments” application, Page 3).
Built-in SFP+ and Stacking Note
The two built-in SFP+ ports on the front are reserved for network uplinks or
server/storage connection. For distant stacking using fiber, AX743 and the
rear module bays are preferred.
AX743
SFP+ Host Module
AXM761, AXM762 or AXM763
SFP+ 10GBase-SR, LR or LRM optics
• AX743 + AXM761/AXM762/AXM763 optics in each
rear slot
• Two SFP+ modules are recommended for full 40
Gbps bandwidth and complete redundancy
-4-
ProSafe ® 24- and 48-port Stackable Gigabit PoE L2+ Managed Switches
GSM7228PS, GSM7252PS
NETGEAR Hardware Stacking
Features
Single IP address management
Benefits
• Stack up to 8 switches as a single “chassis” logical unit
• One GUI and one CLI managing the whole stack
• The stack acts as a single switch in the network
• The other switches in the network also see the stack as a single switch
• Growth is easy, adding a switch to the stack is as simple as connecting the new unit to the stack (configuration
is instantly updated)
Bi-directional architecture
48 Gigabit local stacking capacity per switch using
AX742 stacking kit
40 Gigabit distant stacking capacity using AX743 +
AXM761/AXM762/AXM763 (SFP+ optics)
• Higher stacking throughput capacity with lower latency and jitter for VoIP and video traffic
• Each switch in the stack understands the shortest path to forward traffic, bi-directionally both up and down
• Vertical/local stacking and horizontal/distant stacking can be mixed for convenient 10 Gigabit deployments
(core, distribution layer, edge)
Stack resiliency
• Dual ring architecture ensures that if a switch fails within the stack all the other switches can still communicate
with one another
Automatic unit replacement (AUR)
• Adding a new switch to the stack or replacing a failed unit requires no service interruption, the configuration
file is pushed automatically by the stack
Distributed trunking across the stack (link aggregation
groups, LACP)
• Increased performance with distributed trunks to the core
Many-to-one port mirroring across the stack
• Greater redundancy using trunking as several switches are connected to the trunk
(up to 8 ports per trunk – 64 trunks are allowed)
• More flexibility for device troubleshooting
• As for a chassis, port mirroring is available from every port to every port across the stack
VLANs automatic propagation across the stack
• As for a chassis, VLAN port tagging or private groups are available everywhere across the stack as for a
single switch (Unit 1, Port 2; Unit 2, Port 3, etc.)
• No configuration required for the VLAN propagation between the switches
Flexible stacking with non-PoE switches
• Stacking with GSM7328S/GSM7352S/GSM7328FS
• Mixing PoE and non-PoE ports into a single logical unit
• Versatile deployment options
Stacking with GSM7328S/GSM7352S/GSM7328FS Note
Stackable, PoE L2+ Managed Gigabit Switches GSM7228PS and GSM7252PS are flexible enough to integrate GSM73xxS stack configurations in full Layer 3 mode without
L3 License Upgrade.
When integrating a GSM73xxS stack, the GSM7228PS/GSM7352PS will benefit from the Layer 3 stack full feature set, as slaves within the stack.
Only the stack master determines the stack configuration/feature set. If the stack master is a GSM73xxS then the entire stack profits from the master L3 configuration.
Without Layer 3 license upgrade, if a GSM7228PS/GSM7252PS becomes the master, then the entire stack will downgrade to Layer 2+ feature set. Unless Layer 2+ is the
preferred feature set, it is advised to determine in advance which other Layer 3 GSM73xxS slave would become the stack master in case of the stack master failure, by
specifying the secondary stack master settings in the stack configuration.
With a Layer 3 license upgrade, a GSM7228PS/GSM7252PS can become the master and handle the full stack L3 configuration.
-5-
ProSafe ® 24- and 48-port Stackable Gigabit PoE L2+ Managed Switches
GSM7228PS, GSM7252PS
Associated Modules and Optics
SFPs (optics)
AXM761
ProSafe 10GBase-SR
SFP+ LC GBIC
• 10 Gigabit Ethernet “short-reach” fiber connectivity
• LC duplex connector
• Fits into the two built-in 10 GE SFP+ interfaces (front)
• Fits into the 10 GE SFP+ interface of the SFP+ Adapter Module AX743 (rear bays)
• Drives 10 Gigabit Ethernet up to 300 m distances with 50/125μm laser-optimized OM3 multimode fiber cables
• Drives 10 Gigabit Ethernet up to 33m distances with 62.5/125μm OM1 multimode fiber cables
• 5-year warranty
• Ordering part number: AXM761-10000S
AXM762
ProSafe 10GBase-LR
SFP+ LC GBIC
• 10 Gigabit Ethernet “long-reach” fiber connectivity
• LC duplex connector
• Fits into the two built-in 10 GE SFP+ interfaces (front)
• Fits into the 10 GE SFP+ interface of the SFP+ Adapter Module AX743 (rear bays)
• Drives 10 Gigabit Ethernet up to 10 km distances with 9/125μm SMF single mode fiber cables
• Drives 10 Gigabit Ethernet up to 300 m distances with 50/125μm laser-optimized OM3 multimode fiber cables
• Drives 10 Gigabit Ethernet up to 33 m distances with 62.5/125μm OM1 multimode fiber cables
• 5-year warranty
• Ordering part number: AXM762-10000S
AXM763
ProSafe 10GBase-LRM
SFP+ LC GBIC
• 10 Gigabit Ethernet LRM “long reach multimode” fiber connectivity (802.3aq standard)
• LC duplex connector
• Fits into the two built-in 10 GE SFP+ interfaces (front)
• Fits into the 10 GE SFP+ interface of the SFP+ Adapter Module AX743 (rear bays)
• Drives 10 Gigabit Ethernet up to 220 m distances with legacy 62.5/125μm OM1 multimode fiber cables
• Drives 10 Gigabit Ethernet up to 260 m distances with 50/125μm laser-optimized OM3 multimode fiber cables
• 5-year warranty
• Ordering part number: AXM763-10000S
AGM731F
ProSafe 1000Base-SX
SFP LC GBIC
• Gigabit Ethernet “short-reach” fiber connectivity
• LC duplex connector
• Fits into the four shared SFP interfaces (front)
• Drives Gigabit Ethernet up to 550 m distances with 50/125μm laser-optimized OM3 multimode fiber cables
• Drives Gigabit Ethernet up to 275 m distances with 62.5/125μm OM1 multimode fiber cables
• 5-year warranty
• Ordering part number: AGM731F
AGM732F
ProSafe 1000Base-LX
SFP LC GBIC
• Gigabit Ethernet “long-reach” fiber connectivity
• LC duplex connector
• Fits into the four shared SFP interfaces (front)
• Drives Gigabit Ethernet up to 10 km distances with 9/125μm SMF single mode fiber cables
• Drives Gigabit Ethernet up to 550 m distances with 62.5/125μm OM1 or 50/125μm OM3 multimode fiber cables
• 5-year warranty
• Ordering part number: AGM732F
AFM735
ProSafe 100BaseFX
SFP LC GBIC
• Fast Ethernet multimode fiber connectivity (IEEE 802.3-2002)
• LC duplex connector
• Fits into the four shared SFP interfaces (front)
• Drives Fast Ethernet up to 2 km distances with legacy 62.5/125μm OM1 multimode fiber cables
• Drives Fast Ethernet up to 2 km distances with 50/125μm laser-optimized OM3 multimode fiber cables
• 5-year warranty
• Ordering part number: AFM735-10000S
-6-
ProSafe ® 24- and 48-port Stackable Gigabit PoE L2+ Managed Switches
GSM7228PS, GSM7252PS
Associated Modules and Optics
Modules for the Rear Bays
AX742
ProSafe 24Gigabit
Stacking Kit
• Each kit contains two stacking modules and one stacking cable
• Each module speed is 12 Gbps (half duplex)/24 Gbps (full duplex)
• Configured in a resilient ring topology, delivers 48 Gbps of stacking bandwidth
• One kit per switch recommended for full bandwidth and redundancy
• 5-year warranty
• Ordering part number: AX742
AX743
ProSafe 10Gigabit
SFP+ adapter module
• Interoperates with SFP+ optics GBICs such as AXM761/AXM762/AXM763
• Also interoperates with standard direct attach SFP+ cables (short copper cables with
“SFP+ like” connectors)
• 5-year warranty
• Ordering part number: AX743-10000S
AX744
ProSafe 10Gigabit
CX4 module
• Adds 10 Gigabit Ethernet “InfiniBand” CX4 connectivity
• Fully compliant with CX4 10-GbE (IEEE 802.3ak Type 10Gbase-CX4) standard
• 1 port CX4 to accommodate standard 10 Gigabit CX4 copper cables
• CX4 copper cable length should remain inferior to 15 meters
• Connect any servers, ReadyNAS® or switches with 10 Gigabit CX4 interface
• 5-year warranty
• Ordering part number: AX744-10000S
10Gigabit XFP Note
The previous 10Gigabit XFP modules are compatible with GSM7228PS and GSM7252PS. XFP Host Module AX741 and XFP Optics AXM751/AXM752 (10GBase-SR/LR) can
equip the rear bays. XFP optics are interoperable with newer SFP+ optics: for instance, an XFP-equipped switch can connect with another SFP+-equipped switch, this is the same
10GBaseSR/LR standard and the same fiber. Only the module form factors are different.
APS525W
ProSafe Auxiliary
Power Supply
Spare Modular Power Supply
• Provides a replaceable power supply
• When an RPS (redundant power supply) is used, the power supply can be replaced without
stopping the switch or requiring a reboot (hot swap)
• 5-year warranty
• Ordering part number: APS525W-10000S
RPS5412
Optimal Power® External
Redundant Power Supply
• Optimal Power® RPS unit certified by NETGEAR
• Includes the DC power cable for the Switch RPS connector (rear)
• Provides seemless redundant power to the Switch
• Reduced total PoE budget when RPS5412 is used: 290W available
• 3-year warranty
• Ordering part number: RPS5412-100NAS (Americas), RPS5412-100EUS (Europe),
RPS5412-100AJS (Asia)
-7-
ProSafe ® 24- and 48-port Stackable Gigabit PoE L2+ Managed Switches
GSM7228PS
GSM7228PS, GSM7252PS
GSM7252PS
TECHNICAL SPECIFICATIONS
PHYSICAL INTERFACES
Front
• 24 auto-sensing RJ45 10/100/1000 ports
• 4 shared SFP ports for Gigabit fiber uplinks (shared with the last 4 RJ45 ports)
• 2 independent 10 Gigabit SFP+ ports
• USB port (config/firmware files storage)
Rear
• 2 additional 10 Gigabit I/O module bays (for 10 Gigabit uplinks or hardware stacking)
• Serial RS-232 port for console
Total
• 24 x Gigabit ports + 4 x 10 Gigabit ports
• Same hardware platform as GSM7328S-200
Front
• 48 auto-sensing RJ45 10/100/1000 ports
• 4 shared SFP ports for Gigabit fiber uplinks (shared with the last 4 RJ45 ports)
• 2 independent 10 Gigabit SFP+ ports
• USB port (config/firmware files storage)
Rear
• 2 additional 10 Gigabit I/O module bays (for 10 Gigabit uplinks or hardware stacking)
• Serial RS-232 port for console
Total
• 48 x Gigabit ports + 4 x 10 Gigabit ports
• Same hardware platform as GSM7352S-200
POE
• All 24 Gigabit RJ45 ports are PoE
• IEEE® 802.3af (up to 15.4 Watts/port)
• All 48 Gigabit RJ45 ports are PoE
• IEEE 802.3af (up to 15.4 Watts/port)
POE+
• The first 8 Gigabit RJ45 ports are PoE+
• IEEE 802.3at (up to 30 Watts/port)
• The first 8 Gigabit RJ45 ports are PoE+
• IEEE 802.3at (up to 30 Watts/port)
TOTAL POE BUDGET
• 384 Watts
• 384 Watts
PROCESSOR / MEMORY
•
•
•
•
Processor: MPC8633 @ 666 MHz
System memory: 256 MB (RAM)
Packet buffer memory: 0.75 MB per switch
Code storage (flash): 32 MB
•
•
•
•
Processor: MPC8633 @ 666 MHz
System memory: 256 MB (RAM)
Packet buffer memory: 1.5 MB per switch
Code storage (flash): 32 MB
•
•
•
•
GSM7228PS/GSM7252PS
GSM7328S/GSM7352S
GSM7328FS
Stack height: 8 switches/384 ports
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Switching fabric: 192 Gbps
Throughput: 285.7 Mpps
Forwarding mode: Store-and-forward
Latency (64-byte frames, 10 to 100 Mbps): <35.5μs
Latency (64-byte frames, 1 Gbps): <4.1μs
Latency (64-byte frames, 10 Gbps): <2.0μs
Addressing: 48-bit MAC address
Address database size: 8,000 MAC addresses
Number of VLANs: 1,024 (IEEE 802.1Q)
Number of multicast groups filtered: 1,024
Number of trunks: 64 trunks, 8-port per trunk
Number of hardware queues for QoS: 8
Number of static routes: 224
Number of IP interfaces: 128
Jumbo frame support: up to 9K packet size
Acoustic noise (ANSI-S10.12): 44 dB @ 25°C ambient temperature
Heat dissipation: 389.20 Btu/hr
Mean time between failures (MTBF): 169,522 hours (~19.4 years) @ 25 °C and
83,550 hours (~9.5 years) @ 55 °C ambient temperature
•
•
•
•
L2+ static routing (Subnets, VLANs)
224 IP routes (L3-capable hardware)
128 IP interfaces (L3-capable hardware)
IP Source Guard
HARDWARE STACKING
•
•
•
•
GSM7228PS/GSM7252PS
GSM7328S/GSM7352S
GSM7328FS
Stack height: 8 switches/384 ports
PERFORMANCE SUMMARY
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Switching fabric: 144 Gbps
Throughput: 107.1 Mpps
Forwarding mode: Store-and-forward
Latency (64-byte frames, 10 to 100 Mbps): <35.2μs
Latency (64-byte frames, 1 Gbps): <4.1μs
Latency (64-byte frames, 10 Gbps): <2.0μs
Addressing: 48-bit MAC address
Address database size: 8,000 MAC addresses
Number of VLANs: 1,024 (IEEE 802.1Q)
Number of multicast groups filtered: 1,024
Number of trunks: 64 trunks, 8-port per trunk
Number of hardware queues for QoS: 8
Number of static routes: 224
Number of IP interfaces: 128
Jumbo frame support: up to 9K packet size
Acoustic noise (ANSI-S10.12): 44 dB @ 25°C ambient temperature
Heat dissipation: 260.49 Btu/hr
Mean time between failures (MTBF): 211,069 hours (~24.1 years) @ 25 °C and
98,705 hours (~11.3 years) @ 55 °C ambient temperature
L3 SERVICES – ROUTING
•
•
•
•
L2+ static routing (Subnets, VLANs)
224 IP routes (L3-capable hardware)
128 IP interfaces (L3-capable hardware)
IP Source Guard
L3 SERVICES - DHCP
• DHCP server (1,024 clients)
• DHCP L2 relay, DHCP snooping
• DHCP server (1,024 clients)
• DHCP L2 relay, DHCP snooping
-8-
ProSafe ® 24- and 48-port Stackable Gigabit PoE L2+ Managed Switches
GSM7228PS
GSM7228PS, GSM7252PS
GSM7252PS
L3 SERVICES - MULTICAST
• IGMP querier
• IGMP querier
L2 SERVICES – SWITCHING
• MAC Address table: 8,000
• ARP cache size: 1,664
• Proxy ARP, Dynamic ARP Inspection
• MAC Address table: 8,000
• ARP cache size: 1,664
• Proxy ARP, Dynamic ARP Inspection
L2 SERVICES – VLANS
•
•
•
•
•
•
•
•
•
•
•
IEEE 802.1Q static VLAN (up to 1,024 VLANs)
IEEE 802.1v Protocol VLAN
Port-based VLAN
MAC-based VLAN
IP subnet-based VLAN
Protocol-based VLAN
Voice VLAN (based on IP phones OUIs)
Guest VLAN with IEEE 802.1x
Auto VLAN Assignment via RADIUS
IEEE 802.1 Q-in-Q (Double-VLAN tagging)
GARP with GVRP/GMRP (automatic registration for membership in VLANs or in
multicast groups)
• Private VLAN groups
•
•
•
•
•
•
•
•
•
•
•
IEEE 802.1Q static VLAN (up to 1,024 VLANs)
IEEE 802.1v Protocol VLAN
Port-based VLAN
MAC-based VLAN
IP subnet-based VLAN
Protocol-based VLAN
Voice VLAN (based on IP phones OUIs)
Guest VLAN with IEEE 802.1x
Auto VLAN assignment via RADIUS
IEEE 802.1 Q-in-Q (double-VLAN tagging)
GARP with GVRP/GMRP (automatic registration for membership in VLANs or in
multicast groups)
• Private VLAN groups
L2 SERVICES - AVAILABILITY
• IEEE 802.3ad Link Aggregation (Static or LACP) up to 64 trunks per stack and up
to 8 ports per trunk
• User selectable LAG hashing algorithm
• IEEE 802.1D Spanning Tree Protocol
• IEEE 802.1w Rapid Spanning Tree
• IEEE 802.1s Multiple Spanning Tree
• IEEE 802.3ad Link Aggregation (Static or LACP) up to 64 trunks per stack and up to
8 ports per trunk
• User selectable LAG hashing algorithm
• IEEE 802.1D Spanning Tree Protocol
• IEEE 802.1w Rapid Spanning Tree
• IEEE 802.1s Multiple Spanning Tree
L2 SERVICES – MULTICAST
• IGMP v1, v2, v3 snooping support
• IGMP querier mode support
• Static multicast filtering (1,024 multicast groups)
• IGMP v1, v2, v3 snooping support
• IGMP querier mode support
• Static multicast filtering (1,024 multicast groups)
L2/L3/L4 SERVICES – QOS
•
•
•
•
•
•
•
L2/L3/L4 QoS: MAC, IP, TCP/UDP ports
IEEE 802.1p Class of Service (CoS)
DiffServ QoS (RFC 2998)
Weighted round robin (WRR) queue technology
Strict priority queue technology
Ingress rate limit in 1 Kbps increments
Egress traffic shaping
•
•
•
•
•
•
•
L2/L3/L4 QoS: MAC, IP, TCP/UDP ports
IEEE 802.1p Class of Service (CoS)
DiffServ QoS (RFC 2998)
Weighted round robin (WRR) queue technology
Strict priority queue technology
Ingress rate limit in 1 Kbps increments
Egress traffic shaping
L2/L3/L4 SERVICES – SECURITY
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Access control lists (ACL) L2/L3/L4: MAC, IP, TCP
MAC-based source/destination ACL
IP subnet-based source/destination ACL
Protocol-based source/destination ACL
ACL over VLAN
Dynamic ACLs
1,024 ACLs
Network storm protection including broadcast multicast and unicast traffic
DoS
ICMP throttling
Protected ports
Port locking
MAC filtering
Port security
DHCP snooping
IP Source Guard
Dynamic ARP inspection
RADIUS (RFC 2865)
RADIUS accounting (RFC 2866)
IEEE 802.1x port access authentication (RADIUS)
Network access control: Captive portal with internal authentication or external
RADIUS authentication
• Possible configuration of 10 captive portals
• TACACS+
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Access control lists (ACL) L2/L3/L4: MAC, IP, TCP
MAC-based source/destination ACL
IP subnet-based source/destination ACL
Protocol-based source/destination ACL
ACL over VLAN
Dynamic ACLs
1,024 ACLs
Network storm protection including broadcast multicast and unicast traffic
DoS
ICMP throttling
Protected ports
Port locking
MAC filtering
Port security
DHCP snooping
IP Source Guard
Dynamic ARP inspection
RADIUS (RFC 2865)
RADIUS accounting (RFC 2866)
IEEE 802.1x port access authentication (RADIUS)
Network access control: Captive portal with internal authentication or external
RADIUS authentication
• Possible configuration of 10 captive portals
• TACACS+
-9-
ProSafe ® 24- and 48-port Stackable Gigabit PoE L2+ Managed Switches
GSM7228PS
GSM7228PS, GSM7252PS
GSM7252PS
IEEE NETWORK PROTOCOLS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
IEEE 802.3 Ethernet
IEEE 802.3i 10BASE-T
IEEE 802.3u 100BASE-T
IEEE 802.3ab 1000BASE-T
IEEE 802.3z Gigabit Ethernet 1000BASE-SX/LX
IEEE 802.3ae 10-Gigabit Ethernet
IEEE 802.3af Power over Ethernet
IEEE 802.3at Enhanced Power over Ethernet
IEEE 802.3ad Trunking (LACP)
IEEE 802.1AB LLDP with ANSI/TIA-1057 (LLDP-MED)
IEEE 802.1D Spanning Tree (STP)
IEEE 802.1s Multiple Spanning Tree (MSTP)
IEEE 802.1w Rapid Spanning Tree (RSTP)
IEEE 802.1p Quality of Service
IEEE 802.1Q VLAN tagging
IEEE 802.1v protocol-based VLAN
IEEE 802.1X Radius Network Access Control
IEEE 802.3x flow control
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
IEEE 802.3 Ethernet
IEEE 802.3i 10BASE-T
IEEE 802.3u 100BASE-T
IEEE 802.3ab 1000BASE-T
IEEE 802.3z Gigabit Ethernet 1000BASE-SX/LX
IEEE 802.3ae 10-Gigabit Ethernet
IEEE 802.3af Power over Ethernet
IEEE 802.3at Enhanced Power over Ethernet
IEEE 802.3ad Trunking (LACP)
IEEE 802.1AB LLDP with ANSI/TIA-1057 (LLDP-MED)
IEEE 802.1D Spanning Tree (STP)
IEEE 802.1s Multiple Spanning Tree (MSTP)
IEEE 802.1w Rapid Spanning Tree (RSTP)
IEEE 802.1p Quality of Service
IEEE 802.1Q VLAN tagging
IEEE 802.1v protocol-based VLAN
IEEE 802.1X Radius Network Access Control
IEEE 802.3x flow control
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
RFC 768 UDP
RFC 783 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 793 TCP
RFC 826 Ethernet ARP
RFC 894 transmission of IP datagrams over Ethernet networks
RFC 896 congestion control in IP/TCP networks
RFC 951 BOOTP
RFC 1321 message-digest algorithm
RFC 1534 interoperation between BOOTP and DHCP
RFC 2131 DHCP client/server
RFC 2132 DHCP options & BOOTP vendor extensions
RFC 2030 Simple Network Time Protocol (SNTP) version 4 for IPv4, IPv6 and OSI
RFC 2865 RADIUS Client (both switch and management access)
RFC 2866 RADIUS Accounting
RFC 2868 RADIUS attributes for Tunnel Protocol support
RFC 2869 RADIUS Extensions
RFC2869bis RADIUS support for Extensible Authentication Protocol (EAP)
RFC 3164 The BSD Syslog Protocol
RFC 3580 802.1X RADIUS usage guidelines (VLAN assignment via RADIUS,
dynamic VLAN)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
RFC 1213 MIB-II
RFC 1493 Bridge MIB
RFC 1643 Ethernet-like MIB
RFC 2233 The Interfaces Group MIB using SMI v2
RFC 2674 VLAN MIB
RFC 2613 SMON MIB
RFC 2618 RADIUS Authentication Client MIB
RFC 2620 RADIUS Accounting MIB
RFC 2737 Entity MIB version 2
RFC 2819 RMON Groups 1,2,3 & 9
IEEE 802.1X MIB (IEEE 802.1-PAE-MIB 2004 Revision)
IEEE 802.1AB – LLDP MIB
ANSI/TIA 1057 – LLDP-MED MIB
Private Enterprise MIBs supporting switching features
IETF RFC STANDARDS – SYSTEM FACILITIES
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
RFC 768 UDP
RFC 783 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 793 TCP
RFC 826 Ethernet ARP
RFC 894 transmission of IP datagrams over Ethernet networks
RFC 896 congestion control in IP/TCP networks
RFC 951 BOOTP
RFC 1321 message-digest algorithm
RFC 1534 interoperation between BOOTP and DHCP
RFC 2131 DHCP client/server
RFC 2132 DHCP options & BOOTP vendor extensions
RFC 2030 Simple Network Time Protocol (SNTP) version 4 for IPv4, IPv6 and OSI
RFC 2865 RADIUS Client (both switch and management access)
RFC 2866 RADIUS Accounting
RFC 2868 RADIUS attributes for Tunnel Protocol support
RFC 2869 RADIUS Extensions
RFC2869bis RADIUS support for Extensible Authentication Protocol (EAP)
RFC 3164 The BSD Syslog Protocol
RFC 3580 802.1X RADIUS usage guidelines (VLAN assignment via RADIUS,
dynamic VLAN)
IETF RFC STANDARDS – SWITCHING MIB
•
•
•
•
•
•
•
•
•
•
•
•
•
•
RFC 1213 MIB-II
RFC 1493 Bridge MIB
RFC 1643 Ethernet-like MIB
RFC 2233 The Interfaces Group MIB using SMI v2
RFC 2674 VLAN MIB
RFC 2613 SMON MIB
RFC 2618 RADIUS Authentication Client MIB
RFC 2620 RADIUS Accounting MIB
RFC 2737 Entity MIB version 2
RFC 2819 RMON Groups 1,2,3 & 9
IEEE 802.1X MIB (IEEE 802.1-PAE-MIB 2004 Revision)
IEEE 802.1AB – LLDP MIB
ANSI/TIA 1057 – LLDP-MED MIB
Private Enterprise MIBs supporting switching features
- 10 -
ProSafe ® 24- and 48-port Stackable Gigabit PoE L2+ Managed Switches
GSM7228PS
GSM7228PS, GSM7252PS
GSM7252PS
IETF RFC STANDARDS – QOS
• RFC 2474 definition of the Differentiated Services Field (DS Field) in the IPv4
and IPv6 headers
• RFC 2475 an architecture for differentiated services
• RFC 2597 Assured Forwarding PHB Group
• RFC 3246 An Expedited Forwarding PHB (Per-Hop Behavior)
• RFC 3260 New Terminology and Clarifications for DiffServ
• RFC 3289 Management Information Base for the Differentiated Services
Architecture (read-only)
• Private MIBs for full configuration of DiffServ, ACL and CoS functionality
• RFC 2474 definition of the Differentiated Services Field (DS Field) in the IPv4
and IPv6 headers
• RFC 2475 an architecture for differentiated services
• RFC 2597 Assured Forwarding PHB Group
• RFC 3246 An Expedited Forwarding PHB (Per-Hop Behavior)
• RFC 3260 New Terminology and Clarifications for DiffServ
• RFC 3289 Management Information Base for the Differentiated Services
Architecture (read-only)
• Private MIBs for full configuration of DiffServ, ACL and CoS functionality
IETF RFC STANDARDS – MANAGEMENT
•
•
•
•
•
•
•
•
•
•
•
•
RFC 854 Telnet
RFC 855 Telnet Option
RFC 1155 SMI v1
RFC 1157 SNMP
RFC 1212 Concise MIB Definitions
RFC 1867 HTML/2.0 Forms with file upload extensions
RFC 1901 Community-based SNMP v2
RFC 1908 Coexistence between SNMP v1 & SNMP v2
RFC 2068 HTTP/1.1 protocol as updated by draft-ietf-http-v11-spec-rev-03
RFC 2271 SNMP Framework MIB
RFC 2295 Transparent Content Negotiation
RFC 2296 Remote Variant Selection; RSVA/1.0 State Management
“cookies” – draft-ietf-http-state-mgmt-05
• RFC 2576 Coexistence between SNMP v1, v2 and v3
• RFC 2578 SMI v2
• RFC 2579 Textual Conventions for SMI v2
• RFC 2580 Conformance statements for SMI v2
• RFC 3410 Introduction and Applicability Statements for Internet Standard
Management Framework
• RFC 3411 An Architecture for Describing SNMP Management Frameworks
• RFC 3412 Message Processing & Dispatching
• RFC 3413 SNMP Applications
• RFC 3414 User-based Security Model
• RFC 3415 View-based Access Control Model
• RFC 3416 Version 2 of SNMP Protocol Operations
• RFC 3417 Transport Mappings
• RFC 3418 Management Information Base(MIB) for the Simple Network
Management Protocol (SNMP)
• SSL 3.0 and TLS 1.0
- RFC 2246 The TLS Protocol, Version 1.0
- RFC 2818 HTTP over TLS
- RFC 2346 AES Ciphersuites for Transport Layer Security
• SSH 1.5 and 2.0
- RFC 4253 SSH Transport Layer Protocol
- RFC 4252 SSH Authentication Protocol
- RFC 4254 SSH Connection Protocol
- RFC 4251 SSH Protocol Architecture
- RFC 4716 SECSH Public Key File Format
- RFC 4419 Diffie-Hellman Group Exchange for the SSH
- Transport Layer Protocol
•
•
•
•
•
•
•
•
•
•
•
•
RFC 854 Telnet
RFC 855 Telnet Option
RFC 1155 SMI v1
RFC 1157 SNMP
RFC 1212 Concise MIB Definitions
RFC 1867 HTML/2.0 Forms with file upload extensions
RFC 1901 Community-based SNMP v2
RFC 1908 Coexistence between SNMP v1 & SNMP v2
RFC 2068 HTTP/1.1 protocol as updated by draft-ietf-http-v11-spec-rev-03
RFC 2271 SNMP Framework MIB
RFC 2295 Transparent Content Negotiation
RFC 2296 Remote Variant Selection; RSVA/1.0 State Management
“cookies” – draft-ietf-http-state-mgmt-05
• RFC 2576 Coexistence between SNMP v1, v2 and v3
• RFC 2578 SMI v2
• RFC 2579 Textual Conventions for SMI v2
• RFC 2580 Conformance statements for SMI v2
• RFC 3410 Introduction and Applicability Statements for Internet Standard
Management Framework
• RFC 3411 An Architecture for Describing SNMP Management Frameworks
• RFC 3412 Message Processing & Dispatching
• RFC 3413 SNMP Applications
• RFC 3414 User-based Security Model
• RFC 3415 View-based Access Control Model
• RFC 3416 Version 2 of SNMP Protocol Operations
• RFC 3417 Transport Mappings
• RFC 3418 Management Information Base(MIB) for the Simple Network
Management Protocol (SNMP)
• SSL 3.0 and TLS 1.0
- RFC 2246 The TLS Protocol, Version 1.0
- RFC 2818 HTTP over TLS
- RFC 2346 AES Ciphersuites for Transport Layer Security
• SSH 1.5 and 2.0
- RFC 4253 SSH Transport Layer Protocol
- RFC 4252 SSH Authentication Protocol
- RFC 4254 SSH Connection Protocol
- RFC 4251 SSH Protocol Architecture
- RFC 4716 SECSH Public Key File Format
- RFC 4419 Diffie-Hellman Group Exchange for the SSH
- Transport Layer Protocol
- 11 -
ProSafe ® 24- and 48-port Stackable Gigabit PoE L2+ Managed Switches
GSM7228PS
GSM7228PS, GSM7252PS
GSM7252PS
MANAGEMENT
•
•
•
•
•
SNMP v1, v2c, v3 with multiple IP addresses
Port mirroring support (many-to-one)
Flow-based mirroring
Syslog
TFTP, SFTP, HTTP, SCP, or local USB flash for Configuration files and
firmware upgrades
• Runtime image download (TFTP)
• Port description
• sFlow®
• Web-based graphic user interface (GUI)
• Command Line interface (CLI)
• IPv6 Management
• Cable Test
• SSLv3/TLSv1.0 Web security for the GUI
• Secure Shell (SSHv1, v2) for CLI
• Telnet sessions for management CPU (5 sessions)
• Configurable management VLAN
• Auto Install
• Admin access control via RADIUS or TACACS+
•
•
•
•
•
SNMP v1, v2c, v3 with multiple IP addresses
Port mirroring support (many-to-one)
Flow-based mirroring
Syslog
TFTP, SFTP, HTTP, SCP, or local USB flash for Configuration files and
firmware upgrades
• Runtime image download (TFTP)
• Port description
• sFlow®
• Web-based graphic user interface (GUI)
• Command line interface (CLI)
• IPv6 Management
• Cable Test
• SSLv3/TLSv1.0 Web security for the GUI
• Secure Shell (SSHv1, v2) for CLI
• Telnet sessions for management CPU (5 sessions)
• Configurable management VLAN
• Auto Install
• Admin access control via RADIUS or TACACS+
LEDS
• Per port: Speed, link, activity
• Per device: Power, fan status, stack ID,
• RPS, master
• Per port: Speed, link, activity
• Per device: Power, fan status, stack ID,
• RPS, master
PHYSICAL SPECIFICATIONS
• Dimensions (w x d x h): 440 x 391 x 43 mm (17.3 x 15.4 x 1.7 in)
• Weight: 6.3 kg (13.89 lb)
• Dimensions (w x d x h): 440 x 391 x 43 mm (17.3 x 15.4 x 1.7 in)
• Weight: 6.8 kg (14.99 lb)
POWER CONSUMPTION
• 545W maximum 100–240V AC, 50–60 Hz universal input when PoE output
384W (all ports used)
• 570W maximum 100–240V AC, 50–60 Hz universal input when PoE output
384W (all ports used)
ENVIRONMENTAL SPECIFICATIONS
Operating:
• temperature: 32° to 122°F (0° to 50°C)
• humidity: 90% maximum relative humidity, non-condensing
• altitude: 10,000 ft (3,000 m) maximum
Storage:
• temperature: – 4° to 158°F (–20° to 70°C)
• humidity: 95% maximum relative humidity, non-condensing
• altitude: 10,000 ft (3,000 m) maximum
Operating:
• temperature: 32° to 122°F (0° to 50°C)
• humidity: 90% maximum relative humidity, non-condensing
• altitude: 10,000 ft (3,000 m) maximum
Storage:
• temperature: – 4° to 158°F (–20° to 70°C)
• humidity: 95% maximum relative humidity, non-condensing
• altitude: 10,000 ft (3,000 m) maximum
ELECTROMAGNETIC EMISSIONS AND IMMUNITY
•
•
•
•
•
•
CE mark, commercial
FCC Part 15 Class A, VCCI Class A
Class A EN 55022 (CISPR 22) Class A
Class A C-Tick
EN 50082-1
EN 55024
•
•
•
•
•
•
CE mark, commercial
FCC Part 15 Class A, VCCI Class A
Class A EN 55022 (CISPR 22) Class A
Class A C-Tick
EN 50082-1
EN 55024
SAFETY
• CE mark, commercial
• CSA certified (CSA 22.2 #950)
• UL listed (UL 1950)/cUL IEC 950/EN 60950
• CE mark, commercial
• CSA certified (CSA 22.2 #950)
• UL listed (UL 1950)/cUL IEC 950/EN 60950
PACKAGE CONTENT
•
•
•
•
•
•
•
•
ProSafe® 24-port Stackable, Gigabit PoE L2+ Managed Switch (GSM7228PS)
Power cord
Rubber footpads for tabletop installation
Rubber caps for the SFP and SFP+ sockets
Rack-mounting kit
Null-modem serial cable (RS-232) with 9-pin connector
Resource CD
ProSafe NMS100 Network Management System 30-day trial CD-ROM
•
•
•
•
•
•
•
•
ProSafe® 48-port Stackable, Gigabit PoE L2+ Managed Switch (GSM7252PS)
Power cord
Rubber footpads for tabletop installation
Rubber caps for the SFP and SFP+ sockets
Rack-mounting kit
Null-modem serial cable (RS-232) with 9-pin connector
Resource CD
ProSafe NMS100 Network Management System 30-day trial CD-ROM
WARRANTY
• ProSafe Lifetime Warranty
• ProSafe Lifetime Warranty
- 12 -
ProSafe ® 24- and 48-port Stackable Gigabit PoE L2+ Managed Switches
GSM7228PS
GSM7228PS, GSM7252PS
GSM7252PS
MODULES & ACCESSORIES
• AFM735 100BASE-FX SFP GBIC
• AGM731F 1000BASE-SX SFP GBIC
• AGM732F 1000BASE-LX SFP GBIC
• AXM761 10GBASE-SR SFP+ GBIC
• AXM762 10GBASE-LR SFP+ GBIC
• AXM763 10GBASE-LRM SFP+ GBIC (Long Reach Multimode)
• AX742 24Gigabit Stacking Kit
• AX743 10Gigabit SFP+ Adapter Module
• AX744 10Gigabit CX4 Module
• APS525W Power Supply Spare Module
• RPS5412 Optimal Power® External Redundant Power Supply
•
•
•
•
•
•
•
•
•
•
•
AFM735 100BASE-FX SFP GBIC
AGM731F 1000BASE-SX SFP GBIC
AGM732F 1000BASE-LX SFP GBIC
AXM761 10GBASE-SR SFP+ GBIC
AXM762 10GBASE-LR SFP+ GBIC
AXM763 10GBASE-LRM SFP+ GBIC (Long Reach Multimode)
AX742 24Gigabit Stacking Kit
AX743 10Gigabit SFP+ Adapter Module
AX744 10Gigabit CX4 Module
APS525W Power Supply Spare Module
RPS5412 Optimal Power® External Redundant Power Supply
ORDERING INFORMATION
Americas
• GSM7228PS-100NAS
Europe
• GSM7228PS-100EUS
Asia
• GSM7228PS-100AJS
Americas
• GSM7252PS-100NAS
Europe
• GSM7252PS-100EUS
Asia
• GSM7252PS-100AJS
PROSUPPORT SERVICE PACKS
• OnCall 24x7, Category 3: PMB0333
• XPressHW, Category 3: PRR0333-100
• OnCall 24x7, Category 4: PMB0334
• XPressHW, Category 4: PRR0334-100
LAYER 3 LICENCE UPGRADES
All regions
* GSM7228PL-10000S See details Page 14
All regions
* GSM7252PL-10000S See details Page 14
- 13 -
ProSafe ® 24- and 48-port Stackable Gigabit PoE L2+ Managed Switches
GSM7228PS + GSM7228PL
GSM7228PS, GSM7252PS
GSM7252PS + GSM7252PL
ADDITIONAL TECHNICAL SPECIFICATIONS, WITH LAYER 3 LICENSE UPGRADE
L3 SERVICES – ROUTING
•
•
•
•
•
•
•
•
•
IPv4/IPv6 unicast dynamic routing
RIP v1/v2 (IPv4)
RIPng (IPv6 – RIP next generation)
OSPF v2/v3 (IPv4)
OSPFv3 (IPv6)
OSPF equal-cost multi-path (4 - ECMP routes)
VRRP 64 instances
IPv6 tunnel support
ICMPv6
•
•
•
•
•
•
•
•
•
IPv4/IPv6 unicast dynamic routing
RIP v1/v2 (IPv4)
RIPng (IPv6 – RIP next generation)
OSPF v2/v3 (IPv4)
OSPFv3 (IPv6)
OSPF equal-cost multi-path (4 - ECMP routes)
VRRP 64 instances
IPv6 tunnel support
ICMPv6
•
•
•
•
IPv6 DHCP Server (1,024 clients)
IPv6 DHCP/ BOOTP Relay
IPv6 DHCP Snooping
DNSv6 support
•
•
•
•
•
IPv4/IPv6 multicast streams routing between VLANs, subnets or different networks
IPv4/IPv6 PIM-SM (sparse Mode)
IPv4/IPv6 PIM-DM (dense Mode)
Distance Vector Multicast Routing Protocol (DVMRP)
Neighbor discovery
L3 SERVICES – DHCP
•
•
•
•
IPv6 DHCP Server (1,024 clients)
IPv6 DHCP/ BOOTP Relay
IPv6 DHCP Snooping
DNSv6 support
L3 SERVICES - MULTICAST
•
•
•
•
•
IPv4/IPv6 multicast streams routing between VLANs, subnets or different networks
IPv4/IPv6 PIM-SM (sparse Mode)
IPv4/IPv6 PIM-DM (dense Mode)
Distance Vector Multicast Routing Protocol (DVMRP)
Neighbor discovery
L2 SERVICES – MULTICAST
• IPv6: MLD v1, v2 snooping support
• MLD proxy
• IPv6: MLD v1, v2 snooping support
• MLD proxy
L2/L3/L4 SERVICES – QOS
• IPv6 L2/L3/L4 QoS: MAC, IP, TCP/UDP ports
• IPv6 L2/L3/L4 QoS: MAC, IP, TCP/UDP ports
L2/L3/L4 SERVICES – SECURITY
•IPv6 Access Control Lists (ACL) L2/L3/L4: MAC, IP, TCP
• IPv6 Access Control Lists (ACL) L2/L3/L4: MAC, IP, TCP
IETF RFC STANDARDS – IPV4 ROUTING
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
RFC 1027 Using ARP to implement Transparent Subnet Gateways (Proxy ARP)
RFC 1256 ICMP Router Discovery Messages
RFC 1765 OSPF Database Overflow
RFC 1812 Requirements for IP Version 4 Routers
RFC 2082 RIP-2 MD5 Authentication
RFC 2131 DHCP Relay
RFC 2328 OSPF Version 2
RFC 2370 The OSPF Opaque LSA Option
RFC 2453 RIP v2
RFC 3046 DHCP Relay Agent Information Option
RFC 3101 The OSPF “Not So Stubby Area” (NSSA) Option
RFC 3137 OSPF Stub Router Advertisement
RFC 3768 VRRP – Virtual Router Redundancy Protocol
Route Redistribution across RIP, OSPF and BGP
VLAN Routing
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
RFC 1027 Using ARP to implement Transparent Subnet Gateways (Proxy ARP)
RFC 1256 ICMP Router Discovery Messages
RFC 1765 OSPF Database Overflow
RFC 1812 Requirements for IP Version 4 Routers
RFC 2082 RIP-2 MD5 Authentication
RFC 2131 DHCP Relay
RFC 2328 OSPF Version 2
RFC 2370 The OSPF Opaque LSA Option
RFC 2453 RIP v2
RFC 3046 DHCP Relay Agent Information Option
RFC 3101 The OSPF “Not So Stubby Area” (NSSA) Option
RFC 3137 OSPF Stub Router Advertisement
RFC 3768 VRRP – Virtual Router Redundancy Protocol
Route Redistribution across RIP, OSPF and BGP
VLAN Routing
•
•
•
•
•
RFC 1724 RIP v2 MIB Extension
RFC 1850 OSPF MIB
RFC 2096 IP Forwarding Table MIB
RFC 2787 VRRP MIB
Private Enterprise MIB supporting Routing features
IETF RFC STANDARDS – IPV4 ROUTING MIB
•
•
•
•
•
RFC 1724 RIP v2 MIB Extension
RFC 1850 OSPF MIB
RFC 2096 IP Forwarding Table MIB
RFC 2787 VRRP MIB
Private Enterprise MIB supporting Routing features
- 14 -
ProSafe ® 24- and 48-port Stackable Gigabit PoE L2+ Managed Switches
GSM7228PS + GSM7228PL
GSM7228PS, GSM7252PS
GSM7252PS + GSM7252PL
IETF RFC STANDARDS – MULTICAST
•
•
•
•
•
•
•
•
•
•
RFC 1112 Host Extensions for IP Multicasting
RFC 2236 Internet Group Management Protocol, Version 2
RFC 2365 Administratively Scoped IP Multicast
RFC 2710 Multicast Listener Discovery (MLD) for IPv6
RFC 3376 Internet Group Management Protocol, Version 3
RFC 3810 Multicast Listener Discovery Version 2 (MLDv2) for IPv6
RFC 3973 Protocol Independent Multicast - Dense Mode (PIM-DM)
RFC 4601 Protocol Independent Multicast - Sparse Mode (PIM-SM)
draft-ietf-idmr-dvmrp-v3-10 Distance Vector Multicast Routing Protocol
draft-ietf-magma-igmp-proxy-06 IGMP/MLD-based Multicast Forwarding
(“IGMP/MLD Proxying”)
• draft-ietf-magma-igmpv3-and-routing-05 IGMPv3/MLDv2 and Multicast Routing
Protocol Interaction
• draft-ietf-pim-sm-bsr-05 Bootstrap Router (BSR) Mechanism for PIM
•
•
•
•
•
•
•
•
•
•
RFC 1112 Host Extensions for IP Multicasting
RFC 2236 Internet Group Management Protocol, Version 2
RFC 2365 Administratively Scoped IP Multicast
RFC 2710 Multicast Listener Discovery (MLD) for IPv6
RFC 3376 Internet Group Management Protocol, Version 3
RFC 3810 Multicast Listener Discovery Version 2 (MLDv2) for IPv6
RFC 3973 Protocol Independent Multicast - Dense Mode (PIM-DM)
RFC 4601 Protocol Independent Multicast - Sparse Mode (PIM-SM)
draft-ietf-idmr-dvmrp-v3-10 Distance Vector Multicast Routing Protocol
draft-ietf-magma-igmp-proxy-06 IGMP/MLD-based Multicast Forwarding
(“IGMP/ MLD Proxying”)
• draft-ietf-magma-igmpv3-and-routing-05 IGMPv3/MLDv2 and Multicast Routing
Protocol Interaction
• draft-ietf-pim-sm-bsr-05 Bootstrap Router (BSR) Mechanism for PIM
IETF RFC STANDARDS – MULTICAST MIB
•
•
•
•
•
•
RFC 2932 IPv4 Multicast Routing MIB
RFC 5060 Protocol Independent Multicast MIB
draft-ietf-idmr-dvmrp-mib-11 Distance-Vector Multicast Routing Protocol MIB
draft-ietf-magma-mgmd-mib-05 Multicast Group Membership Discovery MIB
draft-ietf-pim-bsr-mib-06 PIM Bootstrap Router MIB
Private Enterprise MIB supporting Multicast features
•
•
•
•
•
•
RFC 2932 IPv4 Multicast Routing MIB
RFC 5060 Protocol Independent Multicast MIB
draft-ietf-idmr-dvmrp-mib-11 Distance-Vector Multicast Routing Protocol MIB
draft-ietf-magma-mgmd-mib-05 Multicast Group Membership Discovery MIB
draft-ietf-pim-bsr-mib-06 PIM Bootstrap Router MIB
Private Enterprise MIB supporting Multicast features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
RFC 1981 – Path MTU for IPv6
RFC 2460 – IPv6 Protocol Specification
RFC 2461 – Neighbor Discovery
RFC 2462 – Stateless Auto configuration
RFC 2464 – IPv6 over Ethernet
RFC 2711 – IPv6 Router Alert
RFC 2740 – OSPFv3
RFC 3056 – Connection of IPv6 Domains via IPv4 Clouds
RFC 3315 – DHCPv6 (stateless + relay)
RFC 3484 – Default Address Selection for IPv6
RFC 3493 – Basic Socket Interface for IPv6
RFC 3542 – Advanced Sockets API for IPv6
RFC 3587 – IPv6 Global Unicast Address Format
RFC 3736 – Stateless DHCPv6
RFC 4213 – Basic Transition Mechanisms for IPv6
RFC 4291 – Addressing Architecture for IPv6
RFC 4443 – ICMPv6
IETF RFC STANDARDS – IPV6 ROUTING
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
RFC 1981 – Path MTU for IPv6
RFC 2460 – IPv6 Protocol Specification
RFC 2461 – Neighbor Discovery
RFC 2462 – Stateless Auto configuration
RFC 2464 – IPv6 over Ethernet
RFC 2711 – IPv6 Router Alert
RFC 2740 – OSPFv3
RFC 3056 – Connection of IPv6 Domains via IPv4 Clouds
RFC 3315 – DHCPv6 (stateless + relay)
RFC 3484 – Default Address Selection for IPv6
RFC 3493 – Basic Socket Interface for IPv6
RFC 3542 – Advanced Sockets API for IPv6
RFC 3587 – IPv6 Global Unicast Address Format
RFC 3736 – Stateless DHCPv6
RFC 4213 – Basic Transition Mechanisms for IPv6
RFC 4291 – Addressing Architecture for IPv6
RFC 4443 – ICMPv6
IETF RFC STANDARDS – IPV6 ROUTING MIB
• RFC 2465 – IPv6 MIB
• RFC 2466 – ICMPv6 MIB
350 E. Plumeria Drive
San Jose, CA 95134-1911 USA
1-888-NETGEAR (638-4327)
E-mail: info@NETGEAR.com
www.NETGEAR.com
• RFC 2465 – IPv6 MIB
• RFC 2466 – ICMPv6 MIB
© 2010 NETGEAR, Inc. NETGEAR, the NETGEAR Logo, Connect with Innovation, IntelliFi, PowerShift, ProSafe, ProSecure, ReadyNAS,
Smart Wizard, X-RAID, and X-RAID2, are trademarks and/or registered trademarks of NETGEAR, Inc. and/or subsidiaries in the United States
and/or other countries. Mac and the Mac logo are trademarks of Apple Inc., registered in the U.S. and other countries. Other brand names
mentioned herein are for identification purposes only and may be trademarks of their respective holder(s). Information is subject to change
without notice. All rights reserved.
*Basic technical support provided for 90 days from date of purchase.
D-GSM7228PS/GSM7252PS-3
- 15 -