INSTALLATION MANUAL of Intel’s 1156 Mounting Clip
Disassemble the Intel LGA-775 clip with screw driver and mount the
Intel LGA-1156 clip on the heatsink and tighten it by using a screw
driver.
Entfernen Sie den Intel LGA-775 Clip mit einem Schraubendreher
und installieren Sie den Intel LGA-1156 Clip mit einem Schraubendreher auf dem Kühlkörper.
Retirer le système d’accroche pour socket Intel LGA-775 en utilisant
un tournevis et monter le système d’accroche pour plateforme Intel
LGA-1156 sur le ventirad et serrer à l’aide d’un tournevis.
Desmontar el Intel LGA-775 con un destornillador en montar el gancho
Intel LGA-1156 en el Heatsinkapretar usando el destornillador.
Verwijder de Intel LGA-775 clip met een schroe-vendraaier en plaats
de Intel LGA-1156 clip op de heatsink. Schroef de clip vast met een
schroevendraaier.
Limits of Warranty
Warranty coverage does not include the following:
- A faulty product that leads to harm or damage to other products
- Damage of product as a result of other product components
- Incorrect method of operation or use of product not for intended use
- Any form of alteration to original product
- Inability to install the product as a result of incompatibility with other components.
© Copyright 2009 all rights reserved by GELID Solutions Limited
The Specifications are subject to change without notice.
Please consult our website for further information: www.gelidsolutions.com
Disclaimer:
In no event shall GELID Solutions its directors or employees be liable for any indirect damages,
incidental or consequential damages arising from any defect or error in this manual or product.
All Brand names & Trademarks are the properties of their respective owners.