Data Sheet
Cisco RV 120W Wireless-N VPN Firewall
Take Basic Connectivity to a New Level
®
The Cisco RV 120W Wireless-N VPN Firewall combines highly secure connectivity – to the Internet as well as from
other locations and remote workers – with a high-speed, 802.11n wireless access point, a 4-port switch, an intuitive,
browser-based device manager, and support for the Cisco FindIT Network Discovery Utility, all at a very affordable
price. Its combination of high performance, business-class features and top-quality user experience takes basic
connectivity to a new level (Figure 1).
Figure 1.
Cisco RV 120W Wireless-N VPN Firewall
Product Overview
The Cisco RV 120W Wireless-N VPN Firewall features:
●
High-speed, standards-based 802.11n wireless connectivity to help employees stay productive while away
from their desks
●
Integrated 4-port 10/100 switch with quality of service (QoS) support for enhanced voice, video and data
traffic
●
Support for separate “virtual” networks enables you to control access to sensitive information and to set up
highly secure wireless guest access
●
IP Security (IPsec) VPN support with hardware acceleration to deliver highly secure, high-performance
connections to multiple locations and traveling employees
●
Support for static routing, Routing Information Protocol (RIP) versions 1 and 2, and inter-VLAN routing to
enable flexible connection sharing
●
Proven stateful packet inspection (SPI) firewall, plus advanced wireless security to help keep business
assets safe
●
Simplified configuration through an intuitive, browser-based device manager
●
Support for the Cisco FindIT Network Discovery Utility
© 2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 1 of 6
Data Sheet
Figure 2 shows back panel of the Cisco RV 120W. Figure 3 shows a typical configuration using the firewall.
Figure 2.
Back Panel of the Cisco RV 120W
Figure 3.
Typical Configuration
© 2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 2 of 6
Data Sheet
Product Specifications
Table 1 gives the product specifications for the Cisco RV 120W.
Table 1.
Product Specifications
Feature
Routing
Description
● Static routing
● RIP v1 and v2
● Inter-VLAN routing
Layer 2
● 802.1q -based VLANs
● 4 active VLANs (1 to 4094 range)
Network
● Dynamic Host Configuration Protocol (DHCP) server, DHCP relay agent
● Point-to-Point Protocol over Ethernet (PPPoE), Point-to-Point Tunneling Protocol (PPTP), Layer 2
Tunneling Protocol (L2TP)
● DNS Proxy
● IGMP Proxy and multicast forwarding
● Dynamic Domain Name System (DynDNS, TZO)
● Network Address Translation (NAT), Port Address Translation (PAT), Network Address Port
Translation (NAPT), Session Initiation Protocol Application Layer Gateway (SIP ALG), NAT traversal,
one-to-one NAT
● Multiple DHCP pools
● Port Management
IPv6
● Dual-stack IPv4 and IPv6
● Multicast Listener Discovery (MLD) for IPv6 (RFC2710)
● Stateless address auto-configuration
● DHCP v6
● Internet Control Message Protocol (ICMP) v6
Security
Access control:
● IP access control lists (ACLs)
● MAC-based wireless access control
Firewall:
● SPI firewall
● Port forwarding and triggering
● DoS prevention
● Software based DMZ
Content filtering:
● Static URL blocking or keyword blocking
Secure management:
● HTTPS
● Username/password
802.1X
● Port-based RADIUS authentication (Extensible Authentication Protocol [EAP], Protected EAP [PEAP])
Certificate management
● X.509 v3 certificates
● Certificate upload using PEM format
VPN
● 10 QuickVPN tunnels for remote client access
● 10 IPsec site-to-site tunnels for branch office connectivity
● Triple Data Encryption Standard (3DES), Advanced Encryption Standard (AES) encryption
● Message Digest Algorithm 5 (MD5)/Secure Hash Algorithm (SHA1) authentication
● Dead Peer Detection (DPD)
● IPsec NAT traversal
● VPN pass-through of PPTP, L2TP, IPsec
Quality of Service
● 802.1p port-based priority on LAN port, application-based priority on WAN port
● 4 queues
● DiffServ support
● Traffic Metering
© 2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 3 of 6
Data Sheet
Feature
Description
● Simple Network Management Protocol (SNMP) versions 1, 2c and v3
● Event logging: local, syslog, email alerts
● Firmware upgradable through web browser; imported/exported configuration in text format
Management
● Simple browser-based configuration (HTTP/HTTPS)
● UPnP, Bonjour
● Network diagnostics with packet captures
● NAT throughput: 95 Mbps
● 1000 concurrent sessions
Performance
● VPN throughput: 25 Mbps
Wireless LAN Specifications
Table 2 gives the wireless specifications for the Cisco RV120W.
Table 2.
Wireless LAN Specifications
Feature
WLAN hardware
Description
IEEE 802.11n standard-based access point with 802.11b/g compatibility
Radio and modulation type:
● 802.11b: direct sequence spread spectrum (DSSS)
● 802.11g/n: orthogonal frequency division multiplexing (OFDM)
● 2 omnidirectional 1.8 dBi gain external antennas
Operating channels:
● 11 in North America
● 13 in most of Europe
● Automatic channel selection
Transmit power:
● 802.11b: 17 dBm +/– 1.5 dBm
● 802.11g: 15 dBm +/–1.5 dBm
● 802.11n: 12.5 dBm +/– 1.5 dBm
Receiver sensitivity:
● 802.11b: 11 Mbps@ –90 dBm
● 802.11g: 54 Mbps @ –74 dBm
● 802.11n: 270 Mbps @ –71 dBm
Wireless Domain Services (WDS):
● Allows wireless signals to be repeated by up to 2 compatible receivers
Wi-Fi Multimedia (WMM):
● WMM with QoS (802.11e)
● WMM Power Save (WMM-PS)
Active WLAN clients
● Up to 64 clients
Service Set Identifiers (SSIDs)
● Up to 4 separate virtual networks
Wireless VLAN
● Support for SSID to VLAN mapping with wireless client isolation
WLAN security
● Wi-Fi Protected Access (WPA2, 802.11i)
© 2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 4 of 6
Data Sheet
System Specifications
Table 3 gives the system specifications for the Cisco RV 120W.
Table 3.
Table 3 System Specifications
Feature
Description
WAN
10/100 Mbps Fast Ethernet WAN port
LAN
4-port 10/100 Mbps switch with support for VLAN and QoS
WLAN
Built-in high-speed 802.11n wireless access point
Physical dimensions and weight
Power
● W x D x H = 5.91 in. x 5.91 in. x 1.34 in. (150 mm x 150 mm x 34 mm)
● Weight: 1.10 lb (0.5 kg)
12V 1A
● FCC Class B
● CE
Certification
● IC
● Wi-Fi
Environmental operating range
● Operating temperature: 0° to 40°C (32° to 104°F)
● Storage temperature: –20° to 70°C (–4° to 158°F)
● Operating humidity: 10% to 85% noncondensing
● Storage humidity: 5% to 90% noncondensing
Configuration Requirements
Table 4 lists the configuration requirements for the Cisco RV 120W.
Table 4.
Configuration Requirements
Feature
Description
Network adapter
PC with network adapter and Ethernet cable
Web-based configuration
Web browser
Ordering Information
Table 5 gives ordering information for the Cisco RV 120W.
Table 5.
Ordering Information
Part Number
Product Name
RV120W-A-NA
Cisco RV 120W Wireless-N VPN Firewall (USA)
RV120W-E-G5
Cisco RV 120W Wireless-N VPN Firewall (Europe)
RV120W-N-AU
Cisco RV 120W Wireless-N VPN Firewall (Australia)
RV120W-A-CN
Cisco RV 120W Wireless-N VPN Firewall (China)
RV120W-A-CA
Cisco RV 120W Wireless-N VPN Firewall (Canadian French)
RV120W-A-AR
Cisco RV 120W Wireless-N VPN Firewall (Argentina)
Warranty Information
Find warranty information on Cisco.com at the Product Warranties page.
For More Information
For more information, visit
www.cisco.com/cisco/web/solutions/small_business/products/routers_switches/small_business_routers/index.html.
© 2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 5 of 6
Data Sheet
Printed in USA
© 2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
C78-590161-00
03/10
Page 6 of 6