Thermal Printer
mobile
Mobile Printer
Mobile Printer
DPU-S445
Max printing speed: 90mm/sec
Interface: Bluetooth®, USB, IrDA (ver1.2) and Serial
Compact and Light-weight
Easy paper operation
Support label and cut sheet paper
Windows® drivers (XP and Vista)
Software library (Windows® CE 5.0, Windows® Mobile 5.0 / 6.0)
Model
Printing
Methods
Number of dots/line
Resolution (dots/mm)
Paper width (mm)
Printing width (mm)
Speed (mm/sec) max
Outside diameter of paper roll (mm) max
Character matrix (HxW dots)
Character dimensions (HxW mm)
Number of columns
Type of Paper
Character type
Barcode
Power supply (V)
Communication interface
Input buffer
Command
Cutting
Operating
DPU-S445
DPU-S445
Thermal line dot printing
832
8
112+0-1
104
90
ø50
24 x 12, 24 x 24, 16 x 8, 16 x 16
3.0 x 1.5, 3.0 x 3.0, 2.0 x 1.0, 2.0 x 2.0
52, 26, 69, 34
Roll Paper, Label Roll Paper, Cut Sheet Paper
Optional Font, Downloaded Character, User-defined Character,
Extend Graphics Character set ,Katakana Character set, JIS 1&2 level Kanji
UPC-A/E, JAN(EAN)8/13, ITF, CODE39, CODABAR, CODE128, PDF417, QR Code, MaxiCode, Data Matrix
Li-lon Battery, Specified AC adapter
Bluetooth® *1, USB, IrDA(ver1.2), Serial
4K bytes
ESC/P *2 conformity
Tear bar
Temperature (˚C)
Humidity (%RH)
0 to 50
30 to 80 (Non condensation)
50 *3
145 x 135 x 58 *4
Approx.490 *5
FCC, CE, VCCI
AC adapter, Battery pack, Battery Charger, AC cable, USB cable, Serial cable
Service Life (km)
Dimensions (WxDxH mm)
Mass (g)
Standard
Option
*1 Only bluetooth model *2 ESC/P™:Registered trademark of SEIKO EPSON CORP. *3 Use recommended thermal papers *4 Excluding protrusion *5 including battery, excluding roll paper
Windows® is the registered trademark of Microsoft Corporation (USA).
Serial interface specification
Item
Specification
Baud rate
1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
Data bit
7bits, 8bits
Parity bit
Odd, Even, or None
Stop bit
1bit, 2bits
Control method
H/W BUSY, Xon/Xoff
Easy Paper Operation
USB interface specification
USB printerclass 2.0 conformity
Bluetooth interface specification
Based on Bluetooth® Ver.2.0 + EDR
Infrared interface specification
Based on IrDA Ver. 1.2
Cut Sheet Paper
printing
Based on BHT Ir protocol
Seiko Instruments GmbH
Siemensstraße 9
63263 Neu-Isenburg
Germany
Telephone: 49-6102-297-0
Facsimile: 49-6102-297222
Specifications subject to change without notice.
DPU-S445 / 08.2008