Antenna Overview
Version 2.8
2010/10/20
Contents
ANT-Ceiling-Mimo-2G for 802.11n AP ANT-Omni-4-dual Order No.: 5510000209 .........................................................................................................3 Order No.: 600529 ..............................................................................................................................................4 ANT-RSMA.KS-D-060-03-1m ANT-Omni-vehicle-1.2m Order No.: 600402 ............................................................................................................................5 Order No.: 600519 ....................................................................................................................................6 ANT-RTNC.S-O-STD-2+5G Order No.: 600487 ..............................................................................................................................7 ANT-RSMA.S-O-017 Order No.: 600399 ..........................................................................................................................................8 ANT-Omni-5-2G-1.2m Order No.: 600518 ........................................................................................................................................9 ANT-Omni-8-Dual Order No.: 5510000234 ...................................................................................................................................10 ANT-TNC.KS-D-085-01-3.5m ANT-N-D-23-5G Order No.: 600454 ..........................................................................................................................11 Order No.: 600516 .............................................................................................................................................12 ANT-N-20-5G-dualpol for 802.11n Bridge Links WLAN-Bridgelink-Bundle
Order number: 5500000551 .................................................................................13 Order No.: 5510000226 ............................................................................................................................14 WLAN-Outdoor Bridgelink-Bundle Order No.: 5510000271 .................................................................................................................15 ANT-D-8/11-dual-0.2m ANT-N-D-13/15-dual ACC-EMP-N-dual Order No.: 600512 ......................................................................................................................................16 Order No.: 600513 ........................................................................................................................................17 Order No.: 600499 .............................................................................................................................................18 Low-Loss antenna cables ......................................................................................................................................................................19 Page 2/19
ANT-Ceiling-Mimo-2G for 802.11n AP
Order No.: 5510000209
This antenna can be used in suspended ceilings for 2x3 Mimo Access Points (i.e. W1002n) as ceiling antenna
that fits perfect in office areas. The antenna contains two antenna systems there are 90º twisted again each
other and allows the transmission of two streams. Two streams allows up to 300Mbit/s PHY rate.
Mounted at the ceiling of a room the antenna directed the signal under approx. 60° downwards. In combination
with multi-reflexions at the walls and the ground the coverage is similar or better than the coverage of a omni
directional antenna. The antenna is shipped together with two cables and fits without any additional adaptors
to the W1002n/Wx0x40n, WIx065n.
Features:
Item
Order No.
Frequency range
Range (2,4 GHz)
Polarization
Isolation between both systems
VSWR
Gain
3 dB horizontal beam angle
3 dB vertical beam angle
Connector
Cable SMA to RTNC (Wx000n)
Weight, Dimensions
Color
Operation/Storage Temperature
IP safety class
ANT-Ceiling-Mimo-2G
Indoor Mimo Ceiling Antenna
5510000209
2400 MHz –2500 MHz
Indoor 40-60 m
Dual-Linear +/- 45°
15 dB
1,5 : 1
9 - 10 dBi
360 °
62 - 71°
2 x SMA jack
Shipment is including two cables with 2m length.
Approx. 2dB attenuation.
Approx. 130 g, 13,3 cm x 6,5 cm
Light gray
-10 °C to +55 °C
IP20 for Indoor usage
Ceiling
Floor
Radiation pattern horizontal
Page 3/19
ANT-Omni-4-dual
Order No.: 600529
Description
This antenna features omni directional radiation and has a gain of 4 dBi. The antenna is equipped with an N
jack and always requires an adapter cable from N to RTNC or RSMA, depending on the device to which it is
connected. Due to its special characteristics, it can be used in either of the two frequency bands by merely
switching the frequency at the Wx000. This means that the user can freely select the frequency band he or
she prefers, e.g. if there are interfering applications in the 2.4 GHz band. It can be used in suspended ceilings
and is thus suitable for unobtrusive WLAN supply within buildings. It comes with two screws and anchors for
fixation.
Features:
Item
Order No.
Frequency range
Appropriate cable from N to RTNC (Wx000)
Appropriate cable from N to RSMA
Adapter from RTNC to RSMA
Range (2,4 GHz)
Polarization
VSWR
Gain
Connector
Weight, dimensions
Color
Operating temperature
Storage temperature
Wind load
ANT-Omni-4-dual
600529
2400 - 5875 MHz
CAB-RTNC-N-0.5m, No.: 600507
CAB-RSMA-N-0,5m, No.: 600530
CAB-RSMA-RTNC—0.2m, No.: 600505
Line of sight approx. 400 m, indoors approx. 40 m
Linear, vertical
1.7
>4 dBi
N jack
approx. 300 g, 8.6 cm x 4.3 cm
Light gray, RAL 7035
-40 °C to +80 °C
-40 °C to +80 °C
10 N at 160 km/h (100 mph)
Page 4/19
ANT-RSMA.KS-D-060-03-1m
Order No.: 600402
Description:
This antenna enhances the wireless link of remote desktop PCs. The antenna can be placed on the PC or
desk and is connected with its cable to the PCI card. It can thus be positioned flexibly in order to optimize the
link quality. This antenna can also be used with other devices that have an RSMA connector, such as the
W500 or the Butterfly.
Features:
Item
Order No.
Frequency band
Range
Polarization
Elevation, azimuth
VSWR
Gain
Cable length
Connector
Color
Operating temperature
ANT-RSMA.KS-D-060-03-1m
600402
2400 MHz –2500 MHz
Line of sight approx. 500 m, indoors approx. 40 m
Linear, vertical
80°
1.5
4dBi (cable loss included)
1m
RSMA plug
Gray / transparent
10 °C to +55 °C
Page 5/19
ANT-Omni-vehicle-1.2m
Order No.: 600519
Description:
This antenna features omni directional radiation and has a gain of 5 dBi. It is particularly suitable for vehicle
mounting. Using its 1.2 m cable, it can be connected directly. If required, the cable can be extended with
optionally available RTNC cables. With the help of an adapter to RSMA, this antenna can also be operated at
devices with RSMA jack. For optimum operation, this antenna requires a metallic surface of at least 40 cm x
40 cm, such as a vehicle roof. This antenna is waterproof and can therefore be used both indoors and
outdoors.
Features:
Item
Order No.
Frequency band
Polarization
VSWR
Gain
Cable length
Connector
Hole diameter
Height
Depth
Color
ANT-Omni-vehicle-1.2m
600519
2400 MHz –2500 MHz
Linear, vertical
< 1.5
4 dBi (cable loss included)
1.2 m
RTNC plug
12mm
95mm
Approx. 15mm
Black
Page 6/19
ANT-RTNC.S-O-STD-2+5G
Order No.: 600487
Description:
This antenna is a replacement standard antenna for devices with RTNC connector, such as W1002n, Wx000
or Wi-Serie,. It is swivel-mounted and can easily be adjusted to the desired position.
Features:
Item
Order No.
Range
Frequency band
VSWR
Gain
Connector
Dimensions
Color
Operating temperature
Storage temperature
ANT-RTNC.S-O-STD-2+5G
600487
Line of sight approx. 300 m, indoors approx. 30 m
2400 MHz –2500 MHz / 4900 MHZ -5900 MHZ
< 2.0
1.7 dBi
RTNC plug
approx. 14.5 cm x 1.5 cm
Black
-20 °C to +65 °C
-30 °C to +75 °C
Page 7/19
ANT-RSM
MA.S-O-0017
Ordeer No.: 600399
Description::
This antenna is a replacement standard antenna for devices with
w RSMA connector,
c
suuch as the W5500 or the
Butterfly. It is
i swivel-mouunted and caan easily be adjusted
a
to thhe desired poosition.
Features:
Item
Order No.
Range
Frequency band
b
VSWR
Gain
Connector
Dimensionss
Color
Operating teemperature
Storage tem
mperature
ANT-RSMA
A.S-O-017
600399
Line of sight approx. 3000 m, indoors approx. 30 m
2400 MHz –2500
–
MHz
< 2.0
1.7 dBi
RSMA plug
approx. 14.5 cm x 1.5 cm
m
Black
-20 °C to +665 °C
-30 °C to +775 °C
Page 8/199
ANT-Omni-5-2G-1.2m
Order No.: 600518
Description:
This antenna features omnidirectional radiation and has a gain of 5 dBi. The antenna is equipped with a cable
length of 1.2 m and can thus be positioned at some distance from the access point in order to improve the
transmission and reception properties and to make optimum use of the antenna diversity. If the 1.2 m cable is
not long enough, it can be extended with optionally available RTNC cables. With the help of an adapter to
RSMA, this antenna can also be operated at devices with RSMA jack. This antenna is waterproof and can
therefore be used both indoors and outdoors, e.g. to service an outdoor area. The scope of delivery includes
mounting kits for wall, mast, and window mounting.
Features:
Item
Order No.
Frequency band
Range
Polarization
VSWR
Gain
Cable length
Connector
Weight, dimensions
Color
Operating temperature
Storage temperature
ANT-Omni-5-2G-1.2m
600518
2400 MHz –2500 MHz
Line of sight approx. 500 m, indoors approx. 40 m
Linear, vertical
< 2.0
4 dBi (cable loss included)
1.2 m
RTNC plug
approx. 800 g, 33 cm x 1.9 cm
White
-40 °C to +80 °C
-40 °C to +80 °C
Page 9/19
ANT-Omni-8-Dual
Order No.: 5510000234
Description:
This antenna is an Indoor/Outdoor antenna for 2.4 GHz and 5 GHz. The antenna is suitable for smaller
distances up to several hundred meters, depending on the desired data rate. It must be used with the over
voltage protector ACC-EMP-N-dual
Frequency range
Gain
VSWR
Impedance
Polarization
HPBW / horizontal
HPBW / vertical
Power Handling
2400-2500 MHz
4900-5875 MHz
8dBi
2,0:1 max
50 Ohm
Linear vertical
360°
15°
5W (CW)
Connector
N female
Survival wind speed
Temperature
Humidity
Color
Material
Weight
Dimensions
216 km/h
-40°C bis + 70°C
95%@25°C
White gray
ABS, UV resistant
350g
81 * 78 * 870 mm
H-plane, Max. Gain = 8dBi, Omni
E-plane, Max. Gain = 8dBi, -3dB Beamwidth=15 Grad
Page 10/19
ANT-TNC.KS-D-085-01-3.5m
Order No.: 600454
Description:
Patch antenna for indoor and outdoor use, especially for WLANs. Circular-polarized antennas are used in
areas with many reflections, such as warehouses or production halls and over water surfaces. A swivel
mounting kit for this antenna can be ordered separately (No.: 600298). This antenna requires the adapter
600406 (to RTNC) or 600395 (to RSMA).
Features:
Item
Order No.
Range
Frequency band
Polarization
Elevation, azimuth
VSWR
Gain
Connector
Cable
Weight, dimensions
Color
Operating temperature
Storage temperature
Mounting kit
Wind load
ANT-TNC.KS-D-085-01-3.5m
600454
Line of sight approx. 700 m, indoors approx. 40 m
2400 MHz –2500 MHz
Right-handed circular
65°, 70°
1,5
8.5 dBi (with appropriate cable 5 dBi)
TNC jack
3.5 m; TNC plug—TNC plug
Approx. 100 g, 101 mm x 95 mm x 32 mm
Light gray, RAL 7035
-40 °C to +80 °C
-40 °C to +80 °C
Item ACC-MNT-KIT / Order No. 600298
15 N at 160 km/h (100 mph)
Page 11/19
ANT-N-D-23-5G
Order No.: 600516
Description:
This 5 GHz antenna is suitable for directional links. It has a gain of 23 dBi and a beam angle of 9°, which
permits targeted transmission. At the full transmission rate of 54 Mbps, up to 600 m can be covered, and at a
rate of 6 Mbps, up to approximately 7 km (if an identical antenna is used on the opposite side, with overvoltage
protector and 5 m cable). Due to its compact and flat shape, it is unobtrusive and easy-to-mount. The antenna
has an N jack and can thus be connected to devices of the Wx000 series or the WI series using the
particularly low-loss cables of our solutions.
Features:
Item
Order No.
Frequency band
Polarization
Gain
3 dB horizontal beam angle
3 dB vertical beam angle
Front to back ratio
Max. power
Side-lobe suppression
Weight, dimensions
Color
Material
Operating temperature
Storage temperature
Wind load @ survival speed
IP safety class
Vertical
ANT-N-D-23-5G
600516
5150 - 5350 MHz
5470 - 5875 MHz
Linear, vertical
23 dBi
9°
9°
> 30 dB
6 W (CW) at 25 °C
ETSI EN 302 085, range 1 TS1 - TS3
1.5 kg, 305 x 305 x 25 mm
Light gray
Plastic
-40 °C to +70 °C
-40 °C to +70 °C
264 N at 220 km/h (138 mph)
IP 67
Horizontal
Page 12/19
ANT-N-20-5G-dualpol for 802.11n Bridge Links
Order number: 5500000551
Description:
This 5 GHz Dual Polarization antenna is suitable for directional links in combination with 802.11n units there
transmit two streams. The antenna contain two independent antenna systems, the polarization of these
systems are 90º twisted again each other. It has a gain of 20 dBi and a beam angle of 10°, which permits
targeted transmission. At the full transmission rate of 300 Mbps PHY rate, up to 800 m can be covered, and at
a rate of 150 Mbps, up to approximately 2 km can be covered. Due to its compact and flat shape, it is
unobtrusive and easy-to-mount. The antenna has two N jack and can thus be connected to a W1002n in
example by using the particularly low-loss cables. Shipment is including pole and wall mounting.
Features:
Item
Order No.
Frequency band
Polarization
Gain
3 dB horizontal beam angle
3 dB vertical beam angle
Front to back ratio
Max. power
Side-lobe suppression
Weight, dimensions
Color
Material
Operating temperature
Storage temperature
IP safety class
Remark:
ANT-N-20-5G-dualpol
5500000551
5100 - 5900 MHz
Linear, vertical and horizontal
20,6 dBi at 5100 MHz, 19,5 dBi at 5500 MHz 19 dBi at 5900 MHz
10°
10°
> 30 dB
6 W (CW) at 25 °C
ETSI EN 302 085 Range 1 TS1 - TS3
1,5 kg, 320 x 320 x 20 mm
Light gray
Plastic
-40 °C bis +70 °C
-40 °C bis +70 °C
IP 67
This antenna has two antenna sockets, therefore you need two sets of cable and surge
adaptors.
Page 13/19
WLAN-Bridgelink-Bundle
Order No.: 5510000226
Description: The WLAN Bridge Link Bundle “Out-of-the-Box” is
designed for wireless wireless bridging of radio links in outdoor
environments. The Bundle contain all required components to
setup a radio link by using the new 802.11n technology. The
usage of the components is sense full for radio links with up to 6
km distance.
The follow components are contains:
Quantity
2
4
4
4
2
Order No.
5510000165
600507
600499
5500000847
5500000551
Description
bintec W1002n (Indoor usage)
0,5m RTNC plug N plug LMR400
Surge Arrester N plug N jack
6m N plug N jack LMR400
ANT-N-20-5G Dual Polarization
In case of free line of sight the following results are expected
by using the following configuration.
Configuration of the Access Point
Distance
PHY Rate
Operation
Band
Number
of Spatial
Streams
Bandwidth
Transmit
Power
Allowed
EiRP
Minimum
antenna
height
0,5 km
300 Mbit/s
5 GHz Outdoor
2
40 MHz
16 dBm
1000 mW
2m
1 km
180 Mbit/s
5 GHz Outdoor
2
40 MHz
14 dBm
1000 mW
3m
2 km
120 Mbit/s
5 GHz Outdoor
2
40 MHz
11 dBm
1000 mW
4m
4 km
30 Mbit/s
5 GHz Outdoor
2
40 MHz
11 dBm
1000 mW
4,5 m
6 km
14,4 Mbit/s
5 GHz Outdoor
2
20 MHz
11 dBm
1000 mW
6m
Hints to improve the operating distance:
- Use shorter cables, to reduce the cable lost
- Use a antenna with higher gain
- Select 20 MHz bandwidth instead 40 MHz, or use only one stream.
Hints for installation:
- The link must be free from any obstacles (free line of sight). If necessary a different location must be
used or the antenna height must be increased.
- The antenna connectors of the Access Point ANT1 and ANT2 are connected to the antenna. It makes
no difference which antenna socket is used. The antenna connector ANT3 of the AP are not used for
these application.
- The antenna or rather the antenna pole must be connected with 16 mm2 CU or more to the potential
equalisation. The Surge Arrestor protect the AP and must connected to the grounding of the building
with 1,5 mm2 CU or more. The Surge Arrestor must be inserted in both antenna cables, usually close
to the place there the antenna cable leaving the building. In some cases it is advisable to consult a
specialist for lighting protection.
Page 14/19
WLAN-Outdoor Bridgelink-Bundle
Order No.: 5510000271
The WLAN Outdoor Bridge Link Bundle “Out-of-the-Box” is designed for wireless bridging of radio links in
outdoor environments. The bundle contains all required components to setup a radio link by using the new
802.11n technology. This outdoor bundle contains two bintec WI1065n devices, which can be mounted
directly at the antenna pole. The WI1065n access points are water protected and allow operation
in temperature ranges between -25° C and +65° C.
The bundle contains also two PoE adapters, which enables
power supply over network cable. The dual polarization
antennas are transmitting the data over two streams, what
leads to higher performance of the system. The WLAN
Outdoor Bridgelink Bundle is intended to build radio links up
to 8 km distance.
The bundle contains following components:
Quantity
2
2
4
4
2
2
Order No.
5010590013
5500000551
600507
600499
5020591700
600258
Description
bintec WI1065n
ANT-N-20-5G Dual Polarization
0,5m RTNC plug N plug LMR400
Surge Arrester N plug N jack
Pole mounting WI-65 Series
PoE Injector
In case of free line of sight the results below can be expected by using the following configuration:
Configuration of the Access Point
Distance
PHY rate
Operation
Band
Number of Spatial
Streams
Bandwidth
Transmit
Power
Allowed
EiRP
Minimum antenna
height
0,6 km
300 Mbit/s
5 GHz Outdoor
2
40 MHz
14 dBm
1000 mW
2m
1,5 km
180 Mbit/s
5 GHz Outdoor
2
40 MHz
11 dBm
1000 mW
3m
2,5 km
120 Mbit/s
5 GHz Outdoor
2
40 MHz
9 dBm
1000 mW
4m
5 km
60 Mbit/s
5 GHz Outdoor
2
40 MHz
9 dBm
1000 mW
5,5 m
8,5 km
14,4 Mbit/s
5 GHz Outdoor
2
20 MHz
9 dBm
1000 mW
8m
Hints to improve the operating distance:
- Use a antenna with higher gain
- Select 20 MHz bandwidth instead 40 MHz, or use only one stream.
Hints for installation:
- The link must be free from any obstacles (free line of sight). If necessary a different location must be
used or the antenna height must be increased.
- The antenna connectors of the Access Point ANT1 and ANT2 are connected to the antenna. It makes
no difference which antenna socket is used. The antenna connector ANT3 of the AP are not used for
these application.
- The antenna or rather the antenna pole must be connected with 16 mm2 CU or more to the potential
equalisation. The Surge Arrestor protect the AP and must connected to the grounding of the building
with 1,5 mm2 CU or more. The Surge Arrestor must be inserted in both antenna cables. In some
cases it is advisable to consult a specialist for lighting protection.
Page 15/19
ANT-D-88/11-dual--0.2m
O
Order
No.: 6600512
Description::
This dual-baand antenna is mainly suiited for indooors and directional links. It can be used e.g. for corrridors,
tunnels or outdoor
o
links of up to a few
w hundred meters.
m
It is veery small andd light and caan mounted on
o walls,
masts, and glass surfacees, such as windows,
w
using various mounting
m
materials. At thee full transmisssion rate of
54 Mbps, upp to 100 m caan be covereed in the 5 GH
Hz frequencyy band, and 500
5 m using the 2.4 GHz band, (if an
identical anttenna is usedd on the oppoosite side, with overvoltagge protector and 1 m cabble). At lower data rates,
distances off up to 1 km can
c be coverred. Due to itts special chaaracteristics, it can be used in either of
o the two
frequency bands
b
by merrely switchingg the frequenncy at the Wxx000. This means that thee user can freeely select
the frequenccy band he or
o she preferss, e.g. if theree are interferring applicatioons in the 2.44 GHz band. The
antenna hass an SMA jacck and a 20 cm
c adapter cable
c
from SM
MA to RTNC. It can thus bbe connectedd to a
Wx000 or thhe WI series and operatedd next to thiss device. Alteernatively, extensions andd adapters for other
devices withh RSMA connnector (e.g. W500,
W
Butterrfly) are available.
Features:
Item
Order No.
Range
Frequency band
b
Polarization
Gain
VSWR
HPBW / horrizontal
HPBW / verrtical
Front-to-bacck ratio
Tilt angle
Power conssumption
Impedance
Connector
Weight, dim
mensions
Color
Material
Operating teemperature
Humidity
ANT-D-8/11-dual-0.2m
m
600512
Dependinng on data raate and frequuency, approxx 700 m line of sight
2400 MH
Hz –2500 MHz
4900 MHz - 5875 MHz
Linear, veertical
Linear, vertical
8.5 dBi
d
10.5 dBi
< 2.0
< 2.0
58°
45°
55°
45°
15 dB
0°
10 W (cw
w)
50 Ohmss
R-TNC plug (antennaa: SMA jack; with 20 cm cable
c
ULA1988 SMA plug ÆR-TNC
Æ
plug)
120 g, 1114 x 124 x 400 mm
Gray
ABS, UV
V-resistant
-40 °C too +80 °C
95 % @ 25
2 °C
Page 16/199
ANT-N-D
D-13/15-du
ual
Ordeer No.: 600513
Description::
This antenna is a compoonent of an antenna
a
soluttion for 2.4 GHz
G and 5 GH
Hz point-to-point connectiions for
coupling sitees via WLAN
N. Due to its special
s
charaacteristics, it can
c be used in either of the two frequency bands
by merely sw
witching the frequency att the Wx000 or
o the WI serries. This meeans that the user can freely select
the frequenccy band he or
o she preferss, e.g. if theree are interferring applicatioons in the 2.44 GHz band. The
antenna is small
s
and lighht and thus suitable
s
for sm
maller distances of approx. 0.5 to 1 km
m, dependingg on the
desired dataa rate and freequency band.
Features:
Item
Order No.
Range
Frequency band
b
Gain
VSWR
Polarization
HPBW / horrizontal
HPBW / verrtical
Front-to-bacck ratio
Tilt angle
Power conssumption
Impedance
Connector
Weight, dim
mensions
Color
Material
Operating teemperature
Humidity
Max. wind speed
s
ANT-N
N-D-13/15-dual
6005113
Pleasse refer to thee Solution Shheet for outdooor antenna ssolutions
2400 MHz –2500 MHz
4900 MHz - 5875 MHz
13.5 dBi
15.5 dBi
d
d
< 2.0
< 2.0
Linear, vertical
Linear, vertical
30°
15°
30°
15°
15 dB
B
0°
10 W (cw)
50 Ohhms
N jackk
407 g,
g 200 x 218 x 50 mm
Light gray
ABS, UV-resistantt
-40 °C
C to +80 °C
95 % @ 25 °C
216 km/h
k
Page 17/199
ACC-EMP-N-dual
Order No.: 600499
Description:
This overvoltage protector is used to largely prevent overvoltages from the outside from harming the
electronics and the network, e.g. in the case of a thunderstorm. It is designed for up to 6 GHz and can
therefore easily be used for systems from 2 GHz to 5 GHz. With its N plug and N jack, it can be placed
between the RTNC-N cable and other N cables. The overvoltage protector should be mounted at the transition
point to the building and must be sufficiently earthed.
Insertion loss: 0.4 dB at 2.4 GHz, 0.7 dB at 5.5 GHz
Funkwerk N plug to N B/H jack surge arrester
VSWR[1]
SA13B2
5.88 GHz
1.15
2.4 GHz
1.18
1.5
5.88 GHz
1.25
1
1
0
1
2
3
4
Frequency (GHz)
5
0
6
Funkwerk N plug to N B/H jack surge arrester
0
-0.5
2.5 GHz
-0.236
-1
-1.5
5.88 GHz
-0.423
DB(|S[2,1]|)
SA13B2
1
2
3
4
Frequency (GHz)
5
6
Funkwerk N plug to N B/H jack surge arrester
0
Insertion Loss[S12](dB)
Insertion Loss[S21](dB)
VSWR[2]
SA13B2
2.39 GHz
1.18
1.5
Funkwerk N plug to N B/H jack surge arrester
2
VSWR[S22]
VSWR [S11]
2
-0.5
2.49 GHz
-0.18
5.88 GHz
-0.41
-1
-1.5
DB(|S[1,2]|)
SA13B2
-2
-2
0
1
2
3
4
Frequency (GHz)
5
6
0
1
2
3
4
Frequency (GHz)
5
6
Page 18/19
Low-Loss antenna cables
The antenna cables made from Low-Loss ULA/LMR400 coaxial
cables and suitable for outdoor installations. The cables meet the
demand of the Funkwerk Access Points and antennas. The
connectors are mounted with water protected shrink material.
Order
number
Description
Attenuation**
Specification
Typical application
2,4 GHz
5 GHz
0,7 dBm
1,2 dBm
600507
CAB-RTNC-N-0,5m
RTNC Plug N Plug
WI1065n to a ANT-N-20-5G Dual Polarization or as
adaptor cable from W1002n/WI-Serie to CAB-N
5500000846
5500000847
5500000848
600509*
CAB-N-3m
CAB-N-6m
CAB-N-9m
CAB-N-20m
N Plug N Jack
N Plug N Jack
N Plug N Jack
N Plug N Jack
N-N- Extension cable
N-N- Extension cable
N-N- Extension cable
N-N- Extension cable
1,1 dBm
1,8 dBm
3 dBm
6 dBm
1,6 dBm
2,7 dBm
4 dBm
10 dBm
600500
600501
600502
CAB-RTNC-1m
CAB-RTNC-3m
CAB-RTNC-5m
RTNC Plug RTNC Jack
RTNC Plug RTNC Jack
RTNC Plug RTNC Jack
W1002n/WI-Serie to ANT-Omni-5-2G-1,2m
W1002n/WI-Serie to ANT-Omni-5-2G-1,2m
W1002n/WI-Serie to ANT-Omni-5-2G-1,2m
0,5 dBm
1,0 dBm
1,6 dBm
0,9 dBm
1,8 dBm
2,6 dBm
600505
600503*
600504*
CAB-RSMA-RTNC-0,2m
CAB-RSMA-RTNC-1m
CAB-RSMA-RTNC-3m
RSMA Plug RTNC Jack
RSMA Plug RTNC Jack
RSMA Plug RTNC Jack
W500/RS-Serie to ANT-Omni-5-2G-1,2m
W500/RS-Serie to ANT-Omni-5-2G-1,2m
W500/RS-Serie to ANT-Omni-5-2G-1,2m
0,5 dBm
1,0 dBm
1,6 dBm
0,9 dBm
1,8 dBm
2,6 dBm
600530*
CAB-RSMA-N-0,5m
RSMA Plug N Plug
W500/RS-Serie to ANT-Omni-4-dual
0,5 dBm
0,9 dBm
* While stock last
** Attenuation values are only approximately
Funkwerk Enterprise Communications GmbH - Suedwestpark 94
D-90449 Nuremberg, Germany
Phone: +49 - 180 300 9191 0
Fax: +49 - 180 300 9193 0
E-mail: info@funkwerk-ec.com - www.funkwerk-ec.com
Antenna Overview
Subject to technical changes
Page 19/19