INSTRUCTION MANUAL
LCD Monitor
Please read this Instruction book before using your LCD monitor.
We wish you many hours of pleasure from your new LCD monitor.
CE42LM6R
CE42LM6DPB
CE42LM6WP
CE42SR2
CE52LH2R
CE52LH2WP
CE52SR2
GB
TABLE OF CONTENTS
TABLE OF CONTENTS. . . . . . . . . . . . . . . . . . . . . . . . . 2
Time menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Setup menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
SAFETY PRECAUTIONS. . . . . . . . . . . . . . . . . . . . . . . . 3
PC Adj. menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Installation and Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
SERVICING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
GB
INSTALLATION MODE . . . . . . . . . . . . . . . . . . . . . . . . 11
Installation Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Servicing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Federal Communications Commission Notice. . . . . . . . . . 4
OPERATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
AC Power Cord Requirement . . . . . . . . . . . . . . . . . . . . . . . 5
Selection of picture size . . . . . . . . . . . . . . . . . . . . . . . . . . 12
End-User License. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
PIP/POP Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
OPERATION (IN TEXT MODE). . . . . . . . . . . . . . . . . . 14
Step: 1 Mains Connection. . . . . . . . . . . . . . . . . . . . . . . . . . 6
Teletext Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Step: 2 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
SPECIFICATIONS/HELPFUL HINTS . . . . . . . . . . . . . 15
Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Remote control battery installation. . . . . . . . . . . . . . . . . . . 7
Helpful hints. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Controls and Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Menu Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
DIMENSIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Picture menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
MENU OPERATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
PC/DVI-D/COMPONENT SIGNAL SUPPORT
TIMING LIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Picture menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
RS232C COMMAND TABLES. . . . . . . . . . . . . . . . . . . 18
Sound menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Robust monitor (CE42LM6R, CE42LM6DPB, CE52LH2R)
The robust monitor can be used in a wide variety of environments for dusty and oily circumstance such as fast food, digital signage, industrial
and public display.
¡NON GLARE ACRYLIC PANEL
T
his monitor set has a non glare acrylic panel. This offers the protection for the panel surface in the public display applications and easy
to clean the panel.
¡ALUMINUM CABINET & NON HOLES DESIGN
T
his monitor set uses Anodized aluminum and it has quite unique “Non-Holes” ventilation design which protects against mischief in the
public display applications and less maintenance when used in a dusty or oily environment.
Weather proof monitor (CE42LM6WP, CE52LH2WP)
Weather resistant and water proof in accordance with the IP66 standard.
¡ANTI REFLECTION TAMPER GLASS
T
his monitor set has a tough anti refection tampered glass. This offers the protection for the panel surface in the public display circumstance.
¡ALUMINUM CABINET & NON HOLES DESIGN
T
his monitor set uses Anodized aluminum and it has quite unique “Non-Holes” ventilation design which protect against mischief in the
public display applications and less maintenance from dust and oil circumstance, and having perfect protection of IP66 weather-resistant
approval.
Daylight readable monitor (CE42SR2, CE52SR2)
In addition to Weather proof monitor, it has adaptive brightness in accordance with prevailing light conditions.
¡EXTENSIVE INPUT & OUTPUT TERMINALS (for all products)
T
his monitor set has various input and output terminals including component (Y,Pb,Pr) or RGBHV input and output with 5-BNC, composite video input and output with BNC, and RS-232 control port (serial D-Sub 9) input and output which offer the daisy chain connection.
There are computer inputs (a D-Sub 15 RGB terminal) and DVI-D input with HDCP for High definition signals. There are also jacks for
external speakers.
Trademarks
Each name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation.
2
SAFETY PRECAUTIONS
GB
GB
CAUTION: Please read and retain for your safety. This unit has been designed and manufactured to assure your personal safety, but
improper use can result in potential electric shock or fire hazards. In order not to defeat the safeguards incorporated in this monitor observe the
following basic rules for its installation, use and servicing.
Installation and Use
Do not allow anything to rest on the power
cord. Do not locate this LCD monitor where the
cord will be damaged by people walking on it.
Do not overload wall outlets and extension
cords as this can result in fire or electric shock.
A suitable socket outlet must be provided near
to the monitor and shall be easily accessible.
Do not place this LCD monitor near any heat sources such as radiators, heaters, stoves and other heat-generating products (including
amplifiers).
Do not place your LCD monitor on an unstable stand, shelf or table.
Serious injury to an individual, and damage to the LCD monitor may
result if it should fall. Your sales person can recommend an approved
wall mounting kit. A special wall mounting kit is available for this
model.
This LCD monitor should be operated only from the type of power
source indicated on the monitor or as indicated in the Operating Instructions. If you are not sure of the type of power supply, consult your
sales person or your local power company.
For added protection it is strongly recommended that this LCD
monitor has its mains supplied via an approved earth fault protection
device.
WARNING: To prevent injury the LCD monitor must be securely
attached to the wall in accordance with the manufacturers installation
instructions.
IMPORTANT:
This product must be earthed.
This unit is not disconnected from the mains unless the mains lead
is unplugged. The installer must make sure that the waterproof inline
coupler is easily accessible.
(CE42LM6WP/CE42SR2/CE52LH2WP/CE52SR2 model only)
This monitor is tested to IP66 standard rating.
This monitor is not protected against temporary or continuous
immersion in liquid.
Do not use immediately after moving the LCD monitor from a low
temperature to a high temperature environment, as this causes condensation, which may result in fire, electric shock, or other hazards.
Before cleaning, unplug the monitor from the wall socket.
Do not mount near an open flame source. Open flames must never
be used near this LCD monitor.
This LCD monitor should not be built in or enclosed in any way, heat
build up will reduce the life of the monitor.
This LCD monitor should have a minimum distance of 5cm away from
the wall and the monitor should have 10cm distance around the top
and sides.
Always mount using recommended and substantial fixtures and fittings.
10cm
5cm
10cm
10cm
The rear finned section around the cabinet functions as a heat sink,
removing heat away from the monitor. The external surface of the
cabinet (finned area) must not be covered or the airflow restricted in
anyway by enclosing the LCD monitor.
(CE42LM6WP/CE42SR2/CE52LH2WP/CE52SR2 model only)
The operating temperature range of this monitor is guaranteed
0°C ~ 40°C/32°F ~ 104°F. It is not recommended to install the
screen in direct sunlight without adequate shading, as this will
cause the temperature of the panel to rise above the maximum
specified. Doing so may cause a black shadow to appear on the
screen which will disappear when the screen temperature returns
to within the specification. This “of course” does not produce any
harmful effect on the lifetime of the monitor.
Do not apply liquid cleaners or aerosol cleaners directly onto the LCD
monitor. Use a damp cloth for cleaning.
ADDITIONAL FOR NORTH AMERICA AND CANADA:
This monitor must NOT be permanently mounted to the building
structure. It must be mounted in such a way that it can be removed
using basic tools.
The power supply cord must NOT be attached to the building surface.
The power supply cord must NOT be routed through walls, ceiling,
floors, or other similar openings in the building structure.
The power supply cord MUST be positioned so as to prevent physical
damage.
Important: (UK only)
THIS PRODUCT MUST BE EARTHED.
This equipment is fitted with an approved mains lead and an
approved non rewireable UK mains plug. To change a fuse in this
type of plug proceed as follows:
1. Remove the fuse cover and fuse.
2. Fit a new fuse which should be a BS1362 13 Amp A.S.T.A. or
BSI approved type.
3. Ensure that the fuse cover is correctly refitted.
If the fuse cover is lost or damaged the plug must NOT be used
but replaced with a serviceable plug.
If the fitted plug is not suitable for your socket outlets, it should
be cut off and an appropriate plug fitted in its place. If the mains
plug contains a fuse, this should have a rating of 13 Amp, ensure
the fuse cover is correctly fitted. If a plug without a fuse is used,
the fuse at the distribution board should not be greater than 13
Amp.
Note: The severed plug must be destroyed to avoid a possible
shock hazard should it be inserted into a 13 Amp socket elsewhere.
The wires in this mains lead are coloured in accordance with the
following code:
Blue
Brown
Green and Yellow
Neutral
Live
Earth
1. The Blue wire must be connected to the terminal which is
marked with the letter “N” or coloured BLACK.
2. The Brown wire must be connected to the terminal with the
letter “L” or coloured RED.
3. The Green and Yellow wire must be connected to the terminal which is marked with the letter “E” or coloured GREEN or
GREEN and YELLOW.
Before replacing the plug cover, make certain that the cord grip is
clamped over the sheath of the lead - not simply over the wires.
Do not attempt to bypass the safety purpose of the grounding
type plug.
THIS UNIT IS NOT DISCONNECTED FROM THE MAINS UNLESS THE MAINS LEAD IS UNPLUGGED.
THE INSTALLER MUST MAKE SURE THE MAINS LEAD IS
EASILY ACCESSIBLE.
3
SERVICING
GB
GB
Servicing
Your monitor is fully transistorised and does not contain any user serviceable components.
You must not remove the rear cover of the monitor by yourself. The apparatus is working with high voltages and could damage
objects or even endanger people. Leave all required repair and service jobs to an authorised service technician. He will exclusively
use such spare parts that are complying with the same safety standards as applicable to the original parts. The use of original spare
parts can prevent fire, shock and other hazards.
Unplug the LCD monitor from the wall outlet and refer servicing to qualified service personnel under the following
conditions:
n If the power cord or plug is damaged.
n If liquid has been spilt in to the LCD monitor.
n If the LCD monitor has been dropped or the cabinet has been damaged.
n If the LCD monitor exhibits a distinct change in performance.
n If the LCD monitor does not operate normally by following the operating instructions.
n If the LCD monitor has been exposed to rain or water. (CE42LM6R/CE42LM6DPB/CE52LH2R model only)
Adjust only those controls that are covered in the operating instructions as improper adjustment of other controls may result in damage.
This will often require extensive work by a qualified technician to restore the monitor to normal operation.
Important recycling information.
Your SANYO product is designed and manufactured with high quality materials and components
which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately.
In the European Union there are separate collection systems for used electrical and electronic
products.
Please help us to conserve the environment we live in!
Note: This symbol mark and recycle system are applied only to EU countries are not applied to
other countries of the world.
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits
are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications
should be made, you could be required to stop operation of the equipment.
Canadian Radio Interference Regulations
This Class A digital apparatus meets all requirements of the Canadian ICES-003.
WARNING
This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take
adequate measures.
4
GB
SERVICING GB
AC Power Cord Requirement
The AC Power Cord supplied with this LCD monitor meets the requirement for use in the country in which you
purchase it.
AC Power Cord for the United States and Canada:
AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified
by the Canadian Standard Association (CSA).
GROUND
AC Power Cord has a grounding-type AC line plug. This is a safety feature to make sure that the plug will fit into the power outlet.
Do not try to defeat this safety feature. Should you be unable to insert the plug into the outlet, contact your electrician.
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE
End-User License
The product (meaning the equipment or appliance to which this documentation relates) incorporates Software (the software applications, utilities and modules embedded within the Product) which is owned by Sanyo or its licensors. Before using the product, please read the End-User
License Conditions detailed below. If you do not agree to the terms and conditions of the End-User License, Please do not proceed to use the
Product- repack the Product unused and return it to your supplier together with proof of purchase for a full refund. By using the product, you
agree to be bound by the terms and conditions of the End-User License.
License Grant, Conditions and restrictions
1. Sanyo grants you a non-exclusive, world-wide (subject to export controls), non-transferable (except as permitted by 2 below), royalty-free
license to use the Software upon and with the Product.
2. You may not transfer any of your license rights in the Software without the prior written consent of SANYO and if consent is provided then
the Software shall only be transferred in conjunction with the transfer of the Product AND provided that the transferee has read and agreed
to accept the terms and conditions of this license.
3. You must ensure that the copyright, trademark and other protective notices contained in the Software are maintained and not altered or
removed.
4. The Software provided hereunder is copyrighted and licensed (not sold). SANYO especially does not transfer title or and ownership rights
in the Software to you. The Software provided hereunder may contain or be derived from portions of materials provided to SANYO under
license by a third party supplier.
5. Except as expressly permitted by statute you may not;
¡use the Software in conjunction with any other computer hardware other than the product;
¡copy all or part of the Software;
¡incorporate all (or any of) the Software into other programs developed by (or on behalf of) you and/or used by you;
¡reverse-engineer, decompile or disassemble the Software;
¡make the Software (or any part of it) available, or permit its redistribution, for use with any computer hardware other than the Product; or
rent, lease, gift, loan, sell, distribute or transfer possession of the whole or any part of the Software.
Termination
This license is effective until terminated. This license will terminate automatically without notice if you fail to comply with any of its provisions.
Disclaimer
1. The Software is(to the extent permitted by law) supplied “as is” and SANYO and its suppliers expressly exclude all warranties, express or
implied, including (but not limited to) warranties of satisfactory quality, fitness for purpose and non-infringement (save to the extent that the
same are not capable of exclusion at law).
2. In no circumstances will SANYO be liable for any direct, indirect, consequential, or incidental damage (including loss of profits, business
interruption, loss of data or the cost of procurement of substitute goods, technology or services) arising out of the use or the inability to use
the Software (save to the extent that such liability is not capable of exclusion at law).
General
1. This End-User License will be governed by laws of England and the User may only bring claims in the English Courts and SANYO shall be
entitled to bring a claim in the courts of any jurisdiction.
2. This End-User License is governed by the laws of the State of California. The End-User and Sanyo agree that any action to enforce or
interpret the terms of this End-User License shall be brought only in the appropriate state or federal court located in Los Angeles County,
California.The End-User and Sanyo hereby submit to the exclusive jurisdiction and venue of such court.
3. The above terms and conditions supersede any prior agreement, oral or written, between you and SANYO relating to the Software.
5
INSTALLATION
GB
GB
Step: 1 Mains Connection
n Connect the display unit to VGA, BNC and Scart connector as required.
LD-Net
* This figure is 42 inch model.
1. Connect the in-line power connector to the Mains Inlet as shown
above.
2. Connect the power cord of the LCD monitor to a suitable wall
outlet.
✐ As this product does not have a mains On/Off switch, please
ensure your mains plug is easily accessible.
4. AV3
Composite (CVBS) signal input.
AV3-OUT can be used to output the incoming AV3 signal to the
other monitor.
5. DVI-D (Digital Video Interface)
DVI-D supports a large range of resolutions as shown on page 17.
✐T
he LCD monitor is prepared for a mains voltage AC100 ~ 240V,
50Hz/60Hz. To completely switch off the mains, or when the
display unit is not to be used for an extended period of time, it is
advisable to disconnect the power cord from the power outlet.
AC Main
6. PC connection
PC input (PC-IN D-SUB). This input supports a large range of resolutions as shown page 17. Audio can be connected via the 3.5mm
PC-AUDIO IN.
s Outle
t
7. External Speaker
Output the audio signal from AV1, AV2, AV3, PC and DVI.
The speaker impedance is 8 ohms.
✐ Please use the correct mains lead supplied with the set for your
area.
3. Warning: To prevent injury, the unit must be securely attached to
the wall in accordance with the installation instructions.
WARNING! High voltages are used in the
operation of this set. Refer service to qualified
service personnel.
8. AV2 / DVI AUDIO IN
Connect the audio output (stereo) from a computer or video equipment connected AV2 or DVI.
Step: 2 Connections
n INPUT selection
To switch either AV1, RGB, AV2, AV3, PC, DVI or Network by pressing
the INPUT button on your remote control repeatedly.
1. AV1
SCART connection/CVBS/RGB/S-VIDEO.
2. RGB
TTL input (5V RGB signals) into SCART terminal.
3. Y, Pb, Pr/RGBHV connection (AV2)
Choose Y, Pb, Pr or RGB H/V connection by selecting AV2 Setting
in Set up menu (see page 10). You can connect your DVD player
to the Y, Pb, Pr terminals instead of using a scart lead. This can
support high definition in analogue component form. RGB H/V can
be used as a PC input via the BNC terminals. Both options support
a large range of resolutions (page 17). AV2-OUT can be used to
output the incoming AV2 signal to the other monitor.
6
9. Monitor Audio OUT
This terminals output fixed level from AUDIO IN.
10. RS232C IN/OUT
When the monitor is controlled by a computer, connect to this jack
with serial control cable.
You can connect to another monitor with RS232C OUT.
When you connect PC with RS232C, select “ON” at Network
standby in Installation mode.
If it is selected “OFF”, RS232C terminals do not functional. Also
select push button to “SERIAL POART”.
GB
INSTALLATION GB
Remote control
Standby
Input
To switch input source from AV1, RGB, AV2, AV3,
PC, DVI or Network mode.
To switch the monitor on and off. Also see page 8.
Recall
Wide
To select the screen mode Full, Full All, Zoom
16:9, Title in 16:9, Zoom 14:9, Title in 14:9,
Normal or Natural wide.
Refer to page 12.
Menu
To enter and exit the main menu, and sub menu.
To display input selection information and the Time
set.
You can also select colour systems in AV1/AV3
mode as follows: AUTO \ PAL \ SECAM \
NTSC \ NTSC4.43 \ PAL M \ PAL N.
Auto PC
It can also be automatically adjusted in PC mode
by pressing this button for twice .
Back
Used to return to the previous menu.
Level Up/Down
To adjust the sound volume level or enter sub
menus.
F/OK
To confirm the initial setting in the menu.
Picture mode selector
Press the 9 button repeatedly to select the following picture mode.
Personal - Personal preference mode.
Standard - Normal viewing mode.
Dynamic - Suitable for brightly lit rooms.
Soft - Low contrast setting
Eco - Suitable for dimly lit rooms and gives a
cinema-like effect.
Freeze
To switch picture still on or off.
Green
Press this button for more than 5 seconds, installation mode will appear.
Remote control battery installation
Up and Down
To select the next or previous item.
Sound Mute
To mute the sound from the speakers.
The sound changes as follows: Normal volume [\
Mute.
Bass Expander
To get an emphasised bass sound ON or OFF.
TXT/TV
To select Teletext mode.
Main/Sub Picture Swap
To swap Main and Sub picture.
ON/OFF
To switch OFF \ PIP(1) \ PIP(2) \ POP mode
in turn.
Refer to page 13.
FOR EU USERS
The symbol mark and recycling systems described below apply to EU
countries and do not apply to countries in other areas of the world.
Your SANYO product is designed and manufactured with high quality
materials and components which can be recycled and/or reused.
The symbol mark means that electrical and electronic equipment,
batteries and accumulators, at their end-of-life, should be disposed of
separately from your household waste.
Note:
If a chemical symbol is printed beneath the symbol mark, this chemical symbol means that the battery or accumulator contains a heavy
metal at a certain concentration. This will be indicated as follows: Hg:
mercury, Cd: cadmium, Pb: lead
In the European Union there are separate collection systems for used
electrical and electronic equipment, batteries and accumulators.
Please, dispose of them correctly at your local community waste collection/recycling centre.
Install two “AA” 1.5 volt batteries so that the “+” and “–” marks on the
batteries match the “+” and “–” marks inside the unit into the remote
control handset.
Please, help us to conserve the environment we live in!
7
GB INSTALLATION
GB
Controls and Menus
Menu Operation
Many of your monitors functions are controlled through the menu
function, using the remote control.
MENU
Picture
Sound
q
Time
Current Weekday
Current Time
1 - 20
Schedule
Weekday
Time
Power On / Power Off
Action
On Program
AV1 / RGB / AV2 / AV3 / PC / DVI / Network
On / Off
Active
Setup
Menu Setup
Language / H/V-Position / Duration / Transparence
PIP / POP Setup
PIP/POP Mode / Main/Sub Source / PIP Position
Initial Settings
Western / Eastern / Russian / Arabic / Farsi
Text Language
Tile Mode Active / H/V_Sets / H/V Location / Bezel H/V Adjustment
Tile Mode
AV2 Setting
RGBHV / YPbPr
XGA / WXGA 1366x768
Native Resolution
On / Off
PC Power save
w
q The LCD display has a Standby light to show there is power.
Switching into/from standby mode
The Standby mode is used for switching the LCD monitor off for short
periods of time. In standby mode the monitor is switched off but is still
receiving mains power.
¡To turn the monitor into standby mode, press the 4 button.
The blue power indicator illuminates more brightly.
¡To turn the monitor ON from standby mode, press the 4 button
again.
Brightness
Contrast
Color
Tint (only if NTSC equipment is detected)
Sharpness
White Tone
White Tone / R / G / B
Advanced Setting
DCDi / ACC/ACM / CCS / DNR / MPEG NR / Film Mode
Treble
Bass
Balance
On / Off
Bass Expander
PC Adj.
Auto Adjust
H-Position
V-Position
Clock
Phase
During menu operation the bottom of the on screen display will show
which controls can be used for menu navigation.
Press the MENU button to enter the main menu. Whenever main
menu is accessed initially, PICTURE will be the default selection.
A sub menu is selected using the 5 or 6 button and pressing
the 1 or 2 button when the required sub menu is highlighted.
When you have finished you can press the BACK button to return to
the previous menu, press the MENU button to exit the menu operation.
If you find the power indicator flashing, disconnect
power cord from the power outlet and contact our
Service desk.
This warning is a sign to let you know that the
power protection function of this TV set is now
operating.
Picture menu
w Control buttons (bottom corner of back cover)
1. Press the MENU button. PICTURE will be the default selection.
Press the 1 or 2 button to enter.
Set the picture settings for your “personal” preference.
Menu button: Used to display or cancel main menu.
Input/d button: S
witch between AV1, RGB, AV2, AV3, PC , DVI
or Network mode. It is also used to provide sub
menu selection from the Main Menu.
1 or 2 buttons: provide up and down adjustments.
4 button: T
o switch to standby mode (to switch off completely
disconnect the monitor from the power supply).
8
2. Use the 5 or 6 button to select eg. Brightness and the 1 or
2 button to adjust levels.
n White Tone
May be used to adjust the color tone of the picture. Use the 5 or
6 button to select White Tone and press the 1 or 2 button
to enter the sub menu. You can select Personal, Cool, Standard or
Warm settings by using the 1 or 2 button. To adjust the color
tone of the picture by using the 5 or 6 button to select Red(R),
Green(G) or Blue(B) and the 1 or 2 button to adjust levels.
These settings will be stored in personal mode automatically.
MENU OPERATION
GB
Picture menu
n Advanced settings
Use the 5 or 6 button to select Advanced settings and press
the 1 or 2 button to enter the sub menu as follows.
GB
n Current Weekday
Use to set current weekday using the 1 or 2 button.
n Current Time
Use to set the current time using the Numeric buttons.
✐ Other items in Time Menu should not be selected until Current
Time has been set.
n Schedule
Use to set up to 20 separate time schedules for “Power On” or “Power
Off”, select 1 ~ 20 using the 1 or 2 button.
DCDi (Directional Correlational Deinterlacing) is used to process
moving angled edge in deinterlacing to get the smoothest and most
natural image. Press the 1 or 2 button on the remote control to
select On or Off.
n Weekday
Use to set the schedule for “Power On” or “Power Off” of any weekday
from Sunday through to Saturday or Everyday using the 1 or 2
button.
ACC/ACM (ACC: Adaptive Contrast and Color; ACM-II: Active Color
Management-II) is used to select adaptive Brightness, Contrast and
tone control. Press the 1 or 2 button on the remote control to
select suitable mode either Vivid, Cinema, Sport or Off.
n Time
CCS (Cross Color Separation) is used to remove residual chroma
information from luminance signal which is the result of imperfect
decoding of composite video. Press the 1 or 2 button on the
remote control to select either Auto, Standard or Off.
n Action
DNR (Digital Noise Reduction) is available for noise reduction. Press
the 1 or 2 button on the remote control to select either Auto,
Low, Mid, High or Off.
MPEG NR (MPEG Noise Reduction): Removes unwanted ringing and
block noise from images that have undergone MPEG or JPEG compression and decompression. Press the 1 or 2 button on the
remote control to select On or Off.
Film Mode (Inverse 3:2 pulldown): Film vs.Video-Detect film. Performed
on material which underwent technologic conversion to video. Press the
1 or 2 button on the remote control to select On or Off.
Sound menu
Press the MENU button and select Sound using the 5 or 6 buttons, press the 1 or 2 button to enter.
Use to set the schedule for “Power On” or “Power Off” of any time
using the Numeric buttons.
Use to set the schedule for “Power On” or “Power Off” active using
the 1 or 2 button.
You can set Power On timer in Time menu selecting “ON” in “On
Timer Function” in Installation Mode. If it is selected “OFF”, Power On
display in Time menu does not functional.
n On Program
Use to select AV1, RGB, AV2, AV3, PC, DVI or Network for the
schedule of “Power On” using the 1 or 2 button.
n Active
Use to select ON or OFF using the 1 or 2 button. When set
“OFF” the above items “Schedule”, “Weekday”, “Time”, “Action” or
“ON Program” will be inactive.
Use NUMERIC buttons [0 ~ 9] to set On Time. (Action “Power On” –
00:00 ~ 23:59)
✐ Once On Time has been set, when the set time is reached, the
monitor will leave the stand-by status and enter to the source
automatically.
✐ After On Time has been set, you can go on watching other programs. When the set time is reached, the monitor will automatically
switch to the preset program.
✐ On Program can only be selected whenAction (Power On) has
been set.
Select and adjust to obtain the best sound settings for your environment using the 5 or 6 button to select Treble, Bass or Balance
and the 1 or 2 button to adjust levels.
Bass Expander can also be selected using the 5 or 6 button
and pressing the 1 or 2 button to select On or Off.
These settings automatically store when you exit the menu.
Press the BACK button to return to the previous menu.
Press the MENU button to exit menu operation.
Time menu
✐ Action (Power Off) can be set to turn the monitor into standby at a
selected time
Once On Program has been set, when the set time is reached, the
monitor will enter to the preset source automatically.
Use the 1 or 2 button to select On program, AV1, RGB, AV2,
AV3, PC, DVI or Network.
Setup menu
Press the MENU button and select Setup using the 5 or 6 buttons, press the 1 or 2 button to enter. Press the BACK button
to return to the previous menu. Press the MENU button to exit.
Press the MENU button and select Time using the 5 or 6 buttons, press the 1 or 2 button to enter. Press the BACK button
to return to the previous menu. Press the MENU button to exit menu
operation.
n Menu Setup
Whenever Setup menu is accessed initially, Menu Setup will be the
default selection. Press the 1 or 2 button to enter the sub menu.
9
GB MENU OPERATION
GB
V_Sets is used to divide the vertical picture into more than one part,
and the most is also 5 parts (5 monitors). Using the 1 or 2
button to set.
H Location is used to select one part of the horizonal picture to display on the current LCD Monitor using the 1 or 2 button.
V Location is used to select one part of the vertical picture to display
on the current LCD Monitor using the 1 or 2 button.
Language is used to select the preferred language. Use the 1 or
2 button to select English, French, German, Italian, Spanish or
Dutch.
Bezel H Adjustment is used to align the image horizontally with respect to the other monitors in the video wall to accomodate the bezel
width using the 1 or 2 button. (0 ~ 10)
H-Position changes the OSD position horizontally by using the 1
or 2 button.
Bezel V Adjustment is used to align the image vertically with respect
to the other monitors in the video wall to accomodate the bezel width
using the 1 or 2 button. (0 ~ 10)
V-Position changes the OSD position vertically by using the 1 or
2 button.
Duration is used to set the display time of the MENU by using the
1 or 2 button. (5 ~ 120 seconds)
Transparence is used to adjust transparence of menu display. Use
the 1 or 2 button to adjust levels.
n PIP/POP Setup
Use the 5 or 6 button to select PIP/POP Setup and press the
1 or 2 button to enter the sub menu.
n AV2 Setting
Use the 5 or 6 button to select AV2 Setting and press the 1
or 2 button to select YPbPr or RGBHV.
Connect your PC to either PC-IN or RGBHV on the rear of the set.
Once connected select PC mode or AV2 (RGBHV, see page 5 for AV2
input settings) via the INPUT button on your remote control.
The set will become a monitor for the PC.
n Native Resolution
Use the 5 or 6 button to select Native Resolution and press the
1 or 2 button to select XGA or WXGA 1366 x 768.
n PC Power Save
PIP/POP Mode: Using the 1 or 2 button select the most suitable mode PIP1, PIP2, POP or Off. (Please refer to page 13.)
✐W
hen Mode is set to Off, Sub Source and PIP Position will not
work.
Main Source is used to select input source (AV1, RGB, AV2, AV3, PC,
DVI or Network ) for main picture by using the 1 or 2 button.
Sub Source is used to select input source (AV1, AV2, AV3, PC or
DVI) for sub picture by using the 1 or 2 button.
The monitor set automatically turns off with no PC input signal and
wakes up with signal while PC Power Save is active.
Use the 5 or 6 button to select PC Power Save and press the
1 or 2 button to select ON or OFF.
PC Adj. menu
Press the MENU button and select PC Adj. using the 5 or 6 buttons, press the 1 or 2 button to enter. Press the BACK button
to return to the previous menu. Press the MENU button to exit menu
operation.
✐F
or a combination of main picture and sub picture: only DVI or
Network input can assemble with other input source. For example,
if main source is selected as AV1 input, then the sub source must
be DVI or Network input.
PIP Position: Using the 1 or 2 button it can be selected Top
Left, Top Right, Bottom Right or Bottom Left.
This function returns all setting values except for Installation Mode.
Auto Adjust is used to automatically detect incoming signal, and
adjust itself to optimize its performance by using the 1 or 2
button. If the image is not displayed properly, a manual adjustment is
required (Refer to following adjustments).
n Text Language
H-Position is used to move the horizontal picture position by using
the 1 or 2 button.
n Initial Settings
Use the 5 or 6 button to select Text Language and press the
1 or 2 button to select Western, Eastern, Russian, Arabic or
Farsi.
n Tile Mode
This function allows you to split an image to suit your monitor grid
format to create a video wall.
Use the 5 or 6 button to select Tile Mode and press the 1 or
2 button to enter the sub menu as follows.
Tile Mode Active can be set On or Off using the 1 or 2 button.
H_Sets is used to divide the horizonal picture into more than one
part, but the most is 5 parts (5 monitors).
10
V-Position is used to move the vertical picture position by using the
1 or 2 button.
Clock is used to eliminate flicker from the image by using the 1 or
2 button.
Phase is used to eliminate disorder from the image by using the 1
or 2 button.
INSTALLATION MODE
GB
Installation Mode
Installation Mode
On program
Tuner Menu
Max Volume
Winter mode
RC inhibition
Child Lock
Address
Baud rate
Panel protection
AV Auto shut off
Network Standby
On Timer Function
LED light setting
DCR
Network initial
Temperature Error
IP Address
Subnet
Gateway
DNS
Select
Adjust
G2.02 0000
Off
Off
63
Off
Off
Off
0
19200
Off
Off
On
Off
Off
Off
>>>
0
000000000000
000000000000
000000000000
000000000000
MENU
Exit
This LCD monitor allows you to set up the following:
SETTING PROCEDURE
1. Press and hold the GREEN button on the remote control for 5
seconds. (Installation Mode will appear)
GB
n Address
Set the address for the LCD monitor (0 ~ 999).
¡Setting the monitor address in RS232 mode
Each monitor can have a specific Address, which helps command
that monitor individually and will not effect to other monitors connected to a controlling PC Address format command.
The addressing format command is used for operating multiple
monitor sets from a single PC via the RS232C command line.
n Baud rate
Select Baud rate using the 5 or 6 button. To set transmission
speed RS232 or LD-NET communication for 19200 or 9600 Baud rate
by pressing the 1 or 2 button.
n Panel protection
To prevent image sticking which may occur showing still picture for a
long time, select “Panel Protect” using the 5 or 6 button, once
highlighted you can select ON or OFF by pressing the 1 or 2
button.
n AV Auto shut off
With no picture input signal to AV1, RGB, AV2(YPbPr), AV3, DVI,
Network, set turns off automatically. Select “AV Auto Shut Off” using
the 5 or 6 button, once highlighted you can select On or Off by
pressing the 1 or 2 button.
n Network Standby
2. Use the 5 or 6 button to highlight each option, use the 1 or
2 button to adjust each option. Press the MENU button to exit
the mode.
You can save power consumption selecting “Off” at Network Standby
in Installation mode, both RS232C and LD-NET do not functional. To
make them functional, select “ON” in this menu.
n On Program
n On Timer Function
Select ON program using the 5 or 6 button, select the start up
position using the 1 or 2 buttons.
(Off/AV1/RGB/AV2/AV3/PC/DVI or Network)
You can save power consumption selecting “Off” at On Timer function
in Installation mode. On Timer in Time menu does not functional. To
make them functional, select “ON” in this menu.
n Max Volume
n LED Light setting
Select Max volume using the 5 or 6 button, use the 1 or 2
buttons to set the maximum volume required.
Select LED Light setting using the 5 or 6 button, once highlighted you can select On or Off by pressing the 1 or 2 button.
n Winter mode
n DCR
This Function can be activated when the LCD monitor is used during cold temperature conditions, approximately 38˚F/4˚C or below to
maintain picture performance.
Using the 5 or 6 button select winter mode, once highlighted you
can select ON or OFF by pressing the 1 or 2 button.
IMPORTANT: The AC cord should not be disconnected during the
operation of Winter mode function.
When in winter mode, power consumption is higher than normal
standby consumption. This is entirely due to the operation of heating
circuitry. We strongly recommend to turn off Winter mode when the
ambient temperature is above 38˚F/4˚C.
The picture contrast improved while DCR is ON. Select DCR using
the 5 or 6 button, once highlighted you can select On or Off by
pressing the 1 or 2 button.
n RC inhibition
n IP Address/Subnet/Gateway/DNS
You can prevent unwanted remote control operation by selecting RC
Inhibition.
Select using the 5 or 6 button. Press the 1 or 2 button to
select On or Off.
To re-instate RC operation press and hold the green button on the
remote control and select RC inhibition OFF.
These 4 items display the LD-Net information. If LD-NET is NOT connected, all the items would be displayed as “000000000000”.
n Network Initial
This function automatically installs the IP Address, Subnet, Gateway
and DNS information.
n Temperature Error
The recorded number of abnormal temperature is occurred is indicated here.
✐ Disconnecting the mains supply before exiting Installation Mode
will cancel the following features On program, RC inhibition, Address and Baud Rate.
n Child Lock
You can prevent unwanted operation of the LCD monitor via the
buttons on the rear of the monitor.
Select using the 5 or 6 button. Press the 1 button to select
On or OFF. The “Child Lock” OSD will appear if buttons are pressed
when child lock is On.
✐ Standby operates normally when childlock is set “On”.
11
OPERATION
GB
GB
Selection of picture size
Select screen size from FULL, FULL ALL, ZOOM 16:9, TITLE IN 16:9,
ZOOM 14:9, TITLE IN 14:9, NORMAL or NATURAL WIDE by pressing
the WIDE button repeatedly on the Remote Control.
✐W
hen in AV2 (RGBHV) or PC mode FULL or NORMAL can be
selected.
Note: Full - Set display area 100%
✐O
nly in DVI or AV2 (YPbPr) displaying high resolution content
FULL and FULL ALL are selectable.
Note: F
ULL - Set display area 95%
FULL ALL - Set display area 100%
All other inputs AV1, AV3, DVI or AV2 (YPbPr) (displaying lower resolutions) can select all picture sizes.
n Full/Full All
4:3
n Title In 14:9
14:9
The whole screen The whole screen
is filled stretching is filled stretching
the width.
the height slightly
at the edges.
16:9
The whole screen
is filled with the
corrrect picture
ratio.
Letterbox Video
The black bars
top and bottom
are present and
the height is
compressed.
n Zoom 16:9
4:3
14:9
16:9
TITLES ON SCREEN
TITLES ON SCREEN
TITLES ON SCREEN
As zoom (14:9),
but bottom is
compressed even
more to allow
subtitles to be
seen.
As zoom (14:9),
but bottom is
compressed even
more to allow
subtitles to be
seen.
As zoom (14:9),
but bottom is
compressed even
more to allow
subtitles to be
seen.
As zoom (14:9),
but bottom is
compressed even
more to allow
subtitles to be
seen.
14:9
16:9
Letterbox Video
TITLES ON SCREEN
n Normal
4:3
14:9
16:9
Letterbox Video
4:3
The correct
picture width is
maintained but
the top and bottom are cropped.
Zooms in slightly
cropping the top
and bottom.
Zooms in slightly
cropping the top
and bottom.
The black bars
top and bottom
are smaller and
the picture height
is compressed
slightly.
The correct ratio
is maintained with
black bars on the
left and right.
4:3
14:9
16:9
Letterbox Video
TITLES ON SCREEN
TITLES ON SCREEN
TITLES ON SCREEN
As Zoom (16:9),
but bottom is
compressed even
more to allow
subtitles to be
seen.
As Zoom (16:9),
but bottom is
compressed even
more to allow
subtitles to be
seen.
As Zoom (16:9),
but bottom is
compressed even
more to allow
subtitles to be
seen.
As Zoom (16:9),
but bottom is
compressed even
more to allow
subtitles to be
seen.
4:3
14:9
16:9
Letterbox Video
The correct
picture width is
maintained but
the top and bottom are cropped.
Zooms in slightly
cropping the top
and bottom.
Zooms in slightly
cropping the top
and bottom.
The black bars
top and bottom
are smaller and
the picture height
is compressed
slightly.
n Title in 16:9
Black bars
left and right,
picture height is
stretched.
Black bars
left and right,
picture height is
stretched.
Black bars left,
right, top and
bottom.
n Natural Wide
4:3
14:9
16:9
Letterbox Video
TITLES ON SCREEN
n Zoom 14:9
12
Letterbox Video
Stretches the pic- The height is exture horizontally
panded to fill the
to fill the screen.
whole screen.
The picture is
more stretched at
the edges.
The picture fills
the screen and
is proportionally
correct.
The black bars
top and bottom
remain and the
height is compressed to fit the
picture area.
OPERATION GB
GB
PIP/POP Operation
Using this function, you can enjoy a DVI or Network program and an
image (AV1, AV2, AV3 or PC input) at the same time.
Press the ON/OFF button on the Remote Control repeatly to select
PIP1, PIP2, POP or OFF mode.
During the PIP/POP mode, press the Main/Sub Picture Swap button will switch the location for main and sub picture.
✐O
nly the sound on the main picture is heard from the monitor
speaker. The sound on the sub-picture cannot be heard.
✐T
he details for PIP/POP operation (eg,location for sub picture or
input source for any picture,etc.), please refer to page 10.
n PIP1 mode
n PIP2 mode
n OFF mode
n POP mode
The left picture is main picture, the right picture is sub picture.
13
OPERATION (IN TEXT MODE)
GB
Teletext Operation
Teletext is only available via external sources.
Teletext mode can be operated by the following buttons on the Remote Control.
✐S
ome buttons have dual functions.
GB
Text Cancel
Press the TEXT CANCEL button in TEXT or MIX mode, the TV picture appears on the screen.
Press this button once again or press TXT/TV button, CANCEL mode
will be cancelled.
In CANCEL mode, “CAN” is always displayed on the upper left of the
screen.
TXT/TV
Press TXT/TV button to select teletext. Press again will display:
AV mode: AV/TEXT mode/MIX mode/AV.
Note:
MIX mode: AV (broadcast image) screen and the contents of TEXT
(superimposed) are displayed simultaneously.
CANCEL mode: TEXT/MIX MODE is cancelled temporarily and AV
image is displayed.
If the signal is removed or disconnected, the monitor will revert to a
blue background with “No signal” message on the screen.
If the TXT/TV button is pressed during the CANCEL mode, the CANCEL mode will be cancelled, and full text will resume.
Text Subcode
Press this button, “110/. . . .” will be displayed (e.g. the current page
is 110).
And press the NUMERIC buttons(0 ~ 9) to enter the sub page.
For example, to select sub page 4, press NUMERIC buttons 0 - 0 - 0 4, and “110/0004” will be displayed.
When finished, press the text subcode button to return to normal
operation.
Text Index
Press this button to select one of the teletext index pages in TEXT,
MIX or CANCEL mode.
Text Red
Use to select the red topic or page number at the bottom of the text
page.
Text Green
Use to select the green topic or page number at the bottom of the text
page.
Text Yellow
Use to select the yellow topic or page number at the bottom of the text
page.
Text Blue
Use to select the blue topic or page number at the bottom of the text
page.
14
Text Hold
Press Text Hold button to stop page request and updating.
HOLD ON:
The Hold symbol will appear instead of the page number.
Update of TELETEXT is forbidden. It holds on the current TEXT
screen display now.
HOLD OFF:
The hold symbol is replaced with the page number.
TELETEXT page data is updated.
The present page is re-requested. (header roll)
Text Hold button will only work whilst in TEXT Mode.
Text Reveal
Press Text Reveal button to reveal hidden items on the text page.
Some pages such as quiz pages have the answers hidden. The button may have to be held to keep the answer on the screen, or press
again to remove the answer.
In Reveal OFF, this indication is not given.
Text Reveal button will only work whilst in text mode.
Page Up and Down
To select the next or previous page.
Volume Up/Down
To adjust the sound volume level.
Text Size
Press Text Size button to enlarge the top half of the text page.
Press Text Size button again to enlarge the bottom half of the text
page.
Press Text Size button again to return to the normal size page.
(Normal/top half enlargement/bottom half enlargement/normal)
Note:
During the top half or bottom half enlargement mode, if a page
request is performed by [0 ~ 9] numeric buttons or the TEXT INDEX
button, it will return to normal mode and a page will be requested.
If HOLD ON/OFF is performed during the top half enlargement mode,
it will hold the top half enlargement mode. (HOLD symbol will display)
If HOLD ON/OFF is performed during the bottom half enlargement
mode, it will hold the bottom half enlargement mode. (HOLD symbol
will NOT display)
SPECIFICATIONS/HELPFUL HINTS
GB
Specification
GB
Helpful hints
Common specification
n NO PICTURE NO SOUND
Power source: 100 ~ 240V 50Hz/60Hz
¡Check if monitor is plugged in.
Colour system: PAL/NTSC/NTSC4.43/SECAM
¡Check monitor is not in standby mode.
AV terminal
AV1: Scart CENELEC Standard
Input: C
omposite video, RGB (5V RGB with 5V sync to pin 14)
and audio-L/R
Output: composite video from AV3 and audio L/R
AV2: BNC
Input: RGB, H and V/Y, Pb, Pr and audio L/R
Output: RGB, H and V/Y, Pb, Pr
AV3: BNC
Input: Composite video
Output: Composite video
n POOR PICTURE
¡Adjust BRIGHTNESS/CONTRAST levels (too low).
n NO COLOUR, PICTURE OK
¡Adjust COLOUR control.
¡Check lead connections.
¡Does the signal input have colour.
n REMOTE CONTROL DOES NOT WORK
¡Check batteries are inserted correctly.
Audio Monitor Out: CINCH L/R
¡Check condition of batteries.
Audio Speaker Out: 42" model 2 x 6W
52" model 2 x 8W
¡Check to see if remote control inhibit is set ON.
n PICTURE OK, NO SOUND
DVI
Input: DVI-D GROUP Standard
¡Check external speakers are connected correctly.
¡Check lead connections to external equipment.
PC
Input: Mini D-SUB 15 PIN and Audio 3.5mm Jack
¡Check volume turned down or mute selected.
Serial Port: RS232C: Input/Output
Net Organiser: POA-LN02 (optional)
When ordering these products, give the Name and Type No. to the
sales dealer.
Model name
CE42LM6R
CE42LM6DPE
CE42LM6WP
CE42SR2
Contrast Ratio
Screen
(inches/cm)
(viewing measured
diagonally)
Display Native
Resolution
Veiwing angles
1200:1
Dimension
(W x H x D)
1027 x 620 x 178.5 mm
42"/106.7 cm
1366 x 768
1200:1 (DCR ON)
H: 178°, V: 178°
1027 x 620 x 183 mm
CE52LH2R
CE52LH2WP
Weight (kg)
32
33
39
39
65
2000:1
52"/132 cm
CE52SR2
1920 x 1080
1304 x 800 x 232 mm
83
83
¡The specifications are subject to change without notice.
¡LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a tiny fraction of the pixels
(0.01% or less) may be ineffective by the characteristics of the LCD panels.
15
DIMENSIONS
GB
GB
n CE42SR2
Unit: mm
989.0
925.4
(WALL MOUNT SCREW)
10 x M6, 1.0 PITCH x 12MM
418.4
1027.0
953.0
930.25
VIEWING AREA(H)
165.9
126.0
418.4
400.0
200.0
100.0
50.8
41.8
523.0
VIEWING AREA(V)
400.0
200.0
Handles x 2
292.0
300.6
546.0
620.0
17.6
178.5
402.9
417.9
Control buttons
43.7
ø4.2
(RC RECEIVER)
Cables exit terminal cover
ø4.2
(LED INDICATOR)
n CE52SR2
Unit: mm
217
193.8
176.7
1304
1120.6
997
1303
1216
1152
376.5
358.4
117.6
Handles x 4
227.5
Standby / Power LED
Remote control pickup
90
105
10.4
19
233.9
140
280
420
560
Control buttons
286.8
373.3
16
140
280
420
16.9
36.4
516
210.3
800
800
648
712.5
229.6
M6 WALL
BRACKET
FIXING
Cables exit terminal cover
310.9
GB
PC/DVI-D/COMPONENT SIGNAL SUPPORT TIMING LIST
n PC signal support timing
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
GB
n DVI-D signal support timing
Remark
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Remark
720 x 400
31.47
70.09
DOS (VGA)
640 x 480
31.43
59.88
VGA VESA 60Hz
640 x 480
31.43
59.88
VGA VESA 60Hz
640 x 480
37.86
72.81
VGA VESA 72Hz
640 x 480
37.50
75.00
VGA VESA 75Hz
640 x 480
37.5
75
VGA VESA 75Hz
640 x 480
37.86
72.81
VGA VESA 72Hz
640 x 480
34.97
66.6
MAC LC 13"
640 x 480
43.27
85.00
VGA VESA 85Hz
640 x 480
35
66.67
MAC_NORMAL 13"
640 x 480
35.00
66.67
Mac. 13
800 x 600
35.16
56.25
SVGA VESA 56Hz
640 x 480
34.97
66.60
Mac LC 13"
800 x 600
37.88
60.32
SVGA VESA 60Hz
800 x 600
35.16
56.25
SVGA VESA 56Hz
800 x 600
46.875
75
SVGA VESA 75Hz
800 x 600
37.88
60.32
SVGA VESA 60Hz
832 x 624
49.72
74.55
MAC_NORMAL 16"
800 x 600
46.875
75.00
SVGA VESA 75Hz
1024 x 768
48.36
60
XGA VESA 60Hz
800 x 600
34.50
55.38
SVGA
1024 x 768
60.23
75.03
XGA VESA 75Hz
800 x 600
38.00
60.51
SVGA
1024 x 768
56.47
70.07
XGA VESA 70Hz
800 x 600
53.67
85.06
SVGA VESA 85Hz
1024 x 768
60.24
75.08
MAC_NORMAL 19"
832 x 624
49.72
74.55
Mac. 16
1152 x 870
68.68
75.06
MAC_NORMAL 21"
1024 x 768
48.36
60.00
XGA VESA 60Hz
1280 x 1024
63.98
60.02
SXGA VESA 60Hz
1024 x 768
56.47
70.07
XGA VESA 70Hz
720 x 480
31.7
59.94
480p
1024 x 768
60.02
75.03
XGA VESA 75Hz
720 x 480
15.73
59.94
480i
1024 x 768
48.50
60.02
XGA
768 x 575
31.25
50
575p
1024 x 768
60.31
74.92
XGA
768 x 575
15.63
50
575i
1024 x 768
61.00
75.70
XGA
1280 x 720
37.5
50
720p - 50Hz
1024 x 768
68.68
85.00
XGA VESA 85Hz
1280 x 720
45
60
720p - 60Hz
1024 x 768
60.24
75.08
MAC_Normal 19"
1366 x 768
48.36
60
WXGA
1280 x 720
37.5
50.00
720p - 50Hz
1360 x 768
47.7
60
WXGA
1280 x 960
60.00
60.00
SXGA VESA 60Hz
1920 x 1080
28.125
50
1080i - 50Hz
1280 x 1024
79.976
75.025
SXGA VESA 75Hz
1920 x 1080
33.75
60
1080i - 60Hz
1280 x 1024
63.370
60.01
SXGA
1920 x 1080
56.25
50
HDTV 1080p - 50Hz
HDTV 1080p - 60Hz
1280 x 1024
63.34
59.98
SXGA
1920 x 1080
67.5
60
1280 x 1024
63.74
60.01
SXGA
1920 x 1080
27.00
24
HDTV 1080p - 24Hz
1280 x 1024
63.79
60.18
SXGA
1920 x 1080
28.13
25
HDTV 1080p - 25Hz
1920 x 1080
33.75
30
HDTV 1080p - 30Hz
1280 x 1024
63.90
60.00
SXGA
1280 x 1024
81.13
76.107
SXGA
1152 x 900
61.20
65.20
SXGA
1152 x 900
61.85
66.00
SXGA
1152 x 900
71.40
75.60
SXGA
SXGA +
1400 x 1050
65.35
60.12
1400 x 1050
65.12
59.90
SXGA +
1152 x 870
68.68
75.06
MAC_Normal 21"
1280 x 1024
80.00
75.00
Mac II
1600 x 1200
75.00
60.00
UXGA VESA 60Hz
WXGA
1366 x 768
48.36
60.01
1360 x 768
47.73
60.03
WXGA
1920 x 1080
28.125
50.00
1080i - 50Hz
1920 x 1080
33.75
60.00
1080i - 60Hz
Depending on the condition of signals and the ytpe and length of cables, these
signals may not be properly viewed.
To save the native resolution 1366 x 768 setting switch the monitor off then on
using the standby button.
The monitor can be automatically adjusted in pc mode when receiving a standard VESA signal. It will be displayed as XGA when the monitor is receiving a
XGA or WXGA signal.
n Component signal support timing
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Remark
720 x 480
15.735
60i
SDTV 480i
720 x 576
15.625
50i
SDTV 576i
720 x 480
31.25
60p
SDTV 480p
Resolution
720 x 576
31.25
50p
SDTV 576p
1280 x 720
45.00
60p
HDTV 720p
1280 x 720
37.50
50p
HDTV 720p
1920 x 1080
33.75
60i
HDTV 1080i
1920 x 1080
28.13
50i
HDTV 1080i
17
RS232C COMMAND TABLES
GB
n Functional Execution Command Table
Command
Item
GB
n Image control Read Command Table
Status read command
Item
C00
POWER ON
CR BRIGHT
Status of Brightness.
C01
POWER OFF
CR CONT
Status of Contrast.
C24
Wide “Natural” direct
CR COLOR
Status of Color.
C25
Wide “Zoom 16:9” direct
CR TINT
Status of Tint.
C26
Wide “Title in 16:9” direct
CR SHARP
Sharpness.
C27
Wide “Zoom 14:9” direct
CR WBAL
C28
Wide “Title in 14:9” direct
Status of White Balance Mode information.
C29
Wide “Full” direct
CR WBAL-R
Status of White Balance Red.
C0F
Wide “Normal” direct
CR WBAL-G
Status of White Balance Green.
C70
AV1 direct
CR WBAL-B
Status of White Balance Blue.
C71
RGB direct
C72
AV2 RGBHV direct
C73
CR NZRED
Status of Noise reduction setting.
CR FILM
Status of Film mode setting.
AV2 YPbPr direct
CR IMAGE
Status of Image selection.
(The same as PICTURE mode)
C74
AV3 direct
CR DCDI
Status of DCDi setting.
C75
DVI direct
CR ACCACM
Status of ACC/ACM setting.
C76
PC direct
CR CCS
Status of CCS setting.
C64
PC Auto adjust
CR MPEGNR
Status of MPEG NR setting.
C92
Factory settings
CF PSAVE ON
Power save ON
CF PSAVE OFF
Power save OFF
CF CLOK ON
Child lock ON
CF CLOK OFF
Child lock OFF
CF DEA RMCY
RC inhibition OFF
CF DEA RMCN
RC inhibition ON
n PC Read Command Table
Status read command
CR H-POS
Item
Status of Horizontal position.
CR V-POS
Status of Vertical position.
CR PHASE
Status of PHASE value.
CR CLOCK
Status of CLOCK value.
n Input Read Command Table
Status read command
Item
CR INPUT
Status of Input selection.
CR SOURCE
Status of Input source mode.
CR SYSTEM
Status of system of Input mode.
n Screen Read Command Table
Status read command
CR SCREEN
18
Item
Status of screen size.
(The same of WIDE mode)
RS232C COMMAND TABLES GB
GB
n Time Read Command Table
Status read command
n UK5 Read Command Table (Basic Command)
Item
CR PANELH
Status of accumulated lifetime of panel.
(The same as CR_LAMPH Command)
CR MONH
Status of accumulated lifetime of monitor.
(The same as CR_PROJH Command)
n Sound control Read Command Table
Status read command
Item
CR VOLUME
Status of volume value.
CR MUTE
Status of MUTE.
Command
Item
Note
CR0
Power
On, Standby, power error,
CR1
Input Mode
AV1, AV2, . . . , DVI, PC
CR WIDE
Wide mode
Auto, Normal, Full, . . .
CR PICTURE
Picture mode
Dynamic, Standard, . . .
CR SIGNAL
Signal existence
Signal/No signal
CR CHILD
Child lock
On/Off
CR PSAVE
Power save
On/Off
CRTM
Panel usage time
CR RMC
RC inhibition
On/Off
CR MDL
Model number
Model number
–––
n Setting Read Command Table
Status read command
Item
CR LANG
Status of Language selection.
CR P-MANE
Status of Power management setting.
n Error code Table
Error code
Note
?
• Receiving the data that cannot be decoded.
• The wrong indication of parameter.
(Wrong figured number, or wrong word is included)
CR TILE
Status of Tile mode ON/OFF setting.
CR TILE-HSETS
Status of Tile mode, the number of
Horizontal array.
000
Normal receiving. (no error)
CR TILE-VSETS
Status of Tile mode, the number of
Vertical array.
102
If the command of out of range is directly entered
valuable parameter.
CR TILE-HLOCAT
Status of Tile mode, the number of
Horizontal allocation.
103
CR TILE-VLOCAT
Status of Tile mode the number of Vertical allocation.
No matching with Hardware.
(Command for optional function which is not
equipped)
201
CR TILE-BZLHADJ
Status of Tile mode, the width of bezel
(Horizontal).
If the command of “Out of range” is entered by
inclement or decrements by numeric value.
301
While capturing the picture, no execution. Wait and
transmit command again.
CR TILE-BZLVADJ
Status of Tile mode, the width of bezel
(Vertical).
402
CR ONPROG
Status of On Program information.
While PIN code is in operation, no execution.
Wait and transmit command again.
CR WINTERMODE
Status of Winter mode Information.
101
The errors not including above.
CR PANELPROTECT
Statuses of Panel protect Information.
CR LEDLIGHT
Status of LED light Information.
CR AVAUTOSHUT
Status of AV auto shut OFF Information.
CR CHILDLOCK
Statuses of Child lock Information.
CR RCINHIBITION
Status of RC Inhibit Information.
n Other Read Command Table
Status read command
CR STATUS
Item
Status of the operation of the monitor.
CR SIGNAL
Status of with or without signal.
CR FREEZE
Status of Freeze setting.
CR FANLOCK
Statuses of fan lock error.
CR TEMP
Status of current temperature value.
19
N7RRM/N7RMM/N7RSL/N7RTL/N7WVT/N7WWS/N7WYS
SANYO Electric Co., Ltd.