Data Sheet
Cisco SGE2000P 24-Port Gigabit Switch: PoE
Cisco Small Business Managed Switches
High-Performance, Secure Switching with PoE for Small Businesses
Highlights
●
24 high-speed ports optimized for the network core or to support bandwidth-intensive applications
●
Resilient Clustering provides the ability to add more switches as needed and to manage the stack as a single
switch, to support growing businesses
●
Power over Ethernet easily and cost-effectively powers wireless access points, video cameras, and other
network-connected endpoints
●
Strong security protects network traffic to keep unauthorized users off the network
●
Intelligent QoS helps ensure a consistent network experience and supports networked applications including
voice, video, and data storage
Figure 1.
Cisco SGE2000P 24-Port Gigabit Switch: PoE
Product Overview
®
The Cisco SGE2000P 24-Port Gigabit Switch (Figure 1) helps maximize system availability, with fully redundant
stacking, redundant power options, and dual images for resilient firmware upgrades. The switch helps secure the
network through IEEE 802.1Q VLANs, IEEE 802.1X port authentication, access control lists (ACL), denial-of-service
(DoS) prevention, and MAC-based filtering. The enhanced quality of service (QoS) and traffic-management features
help ensure clear and reliable IP voice and video communications.
For wireless or voice over IP (VoIP) deployments, the Cisco SGE2000P supports the IEEE802.3af standard for Power
over Ethernet (PoE). Automatic load sensing in the power control circuitry automatically detects PoE on the end device
before providing power. For safety, each port has independent overload and short-circuit protection, along with LED
indicators for power status. A maximum of 15.4W is available on the Fast Ethernet ports for powering PoE-enabled
wireless access points or VoIP handsets, with a maximum per-device PoE delivery of 185W available for all ports.
The Cisco SGE2000P provides an intuitive, secure management interface, enabling network administrators to better
utilize its comprehensive management feature set, for a better-optimized and more secure network.
© 2008–2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 1 of 6
Data Sheet
Features
●
Twenty-four 10/100/1000 Ethernet ports
●
Four Small Form-Factor Pluggable (SFP) slots (shared with four copper ports) for fiber Gigabit Ethernet
expansion
●
IEEE 802.3af PoE delivered over any of the twenty-four 10/100/1000 copper ports
●
Up to 15.4W available on the copper ports for powering PoE-enabled wireless access points or VoIP
handsets, with a maximum per-device PoE delivery of 185W available for all ports
●
Dual images for resilient firmware upgrades
●
48-Gbps, nonblocking, store-and-forward switching capacity
●
Simplified QoS management using 802.1p, Differentiated Services (DiffServ), or type of service (ToS) traffic
prioritization specifications
●
Power redundancy when used with Cisco RPS1000 380W Redundant Power Supply Unit
●
Fully resilient stacking for optimized growth with simplified management
●
ACLs for granular security and QoS implementation
●
Can be configured and monitored from a standard web browser
●
Secure remote management of the switch via Secure Shell (SSH) and SSL encryption
●
802.1Q-based VLANs enable segmentation of networks for improved performance and security
●
Private VLAN Edge (PVE) for simplified network isolation of guest connections or autonomous networks
●
Automatic configuration of VLANs across multiple switches through Generic VLAN Registration Protocol
(GVRP) and Generic Attribute Registration Protocol (GARP)
●
User/network port-level security via 802.1X authentication and MAC-based filtering
●
Increased bandwidth and added link redundancy with Link Aggregation Control Protocol (LACP)
●
Enhanced rate-limiting capabilities, including back pressure and multicast and broadcast flood control
●
Port mirroring for noninvasive monitoring of switch traffic
●
Jumbo frame support up to 10KB
●
Simple Network Management Protocol (SNMP) versions 1, 2c, and 3 and Remote Monitoring (RMON)
support
●
Fully rack mountable using the included rack-mounting hardware
Specifications
Table 1 contains the specifications, package contents, and minimum requirements for the Cisco SGE2000P 24-Port
Gigabit Switch.
Table 1.
Specifications for the Cisco SGE2000P 24-Port Gigabit Switch: PoE
Feature
Description
Specifications
Ports
● 24 RJ-45 connectors for 10BASE-T/100BASE-TX/1000BASE-T with 4 shared Gigabit SFP slots
● Console port
● Auto medium dependent interface (MDI) and MDI crossover (MDI-X)
● Auto negotiate/manual setting
● RPS port for connecting to redundant power supply unit
Buttons
Cabling type
Reset button
● Unshielded twisted pair (UTP) Category 5 or better for 10BASE-T/100BASE-TX
● UTP Category 5 Ethernet or better for 1000BASE-T
© 2008–2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 2 of 6
Data Sheet
Feature
Description
LEDs
PWR, Fan, Link/Act, PoE, Speed, RPS, Master, Stack ID 1 through 8
PoE
IEEE 802.3af PoE delivered over any of the twenty-four 10/100/1000 ports; power budget allows for max power of 15.4W on up to 12
ports simultaneously.
Performance
Switching capacity
Up to 48 Gbps, nonblocking
Forwarding rate
(based on 64-byte packets)
Up to 35.7 mpps
Stacking
Stack operation
● Up to 8 units in a stack (192 ports)
● Hot insertion and removal
● Ring and chain stacking options
● Master and backup master for resilient stack control
● Auto-numbering or manual configuration of units in stack
Layer 2
MAC table size
8000
Number of VLANs
256 active VLANs (4096 range)
VLAN
● Port-based and 802.1Q tag-based VLANs
● Protocol-based VLAN
● Management VLAN
● PVE
● GVRP
Head-of-line (HOL) blocking
HOL blocking prevention
Layer 3
Layer 3 options
● Static routing
● CIDR (classless interdomain routing)
● 128 static routes
● IPv4
● Forwarding in silicon – wire-speed forwarding of Layer 3 traffic
Management
Web user interface
Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)
SNMP
SNMP versions 1, 2c, and 3 with support for traps
SNMP MIBs
RFC1213 MIB-2, RFC2863 interface MIB, RFC2665 Ether-like MIB, RFC1493 bridge MIB, RFC2674
extended bridge MIB (P-bridge, Q-bridge), RFC2819 RMON MIB (groups 1, 2, 3, and 9 only),
RFC2737 entity MIB, RFC3621 Power Ethernet MIB, RFC 2618 RADIUS client MIB, RFC1215 traps
RMON
Embedded RMON software agent supports 4 RMON groups (history, statistics, alarms, and events)
for enhanced traffic management, monitoring, and analysis.
Firmware upgrade
Port mirroring
● Web browser upgrade (HTTP) and Trivial File Transfer Protocol (TFTP)
● Dual images for resilient firmware upgrades
Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe
© 2008–2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 3 of 6
Data Sheet
Feature
Other management
Description
● Traceroute
● Single IP management
● SSL security for web user interface
● SSH
● RADIUS
● Port mirroring
● TFTP upgrade
● Dynamic Host Configuration Protocol (DHCP) client
● BOOTP
● Simple Network Management Protocol (SNTP)
● Xmodem upgrade
● Cable diagnostics
● Ping
● Syslog
● Telnet client (SSH secure support)
Security
IEEE 802.1X
● 802.1X – RADIUS authentication; MD5 hash
● Guest VLAN
● Single/multiple host mode
Access control
ACLs – drop or rate limit based on:
● Source and destination MAC-based
● Source and destination IP address
● Protocol
● Port
● VLAN
● Differentiated services code point (DSCP)/IP precedence
● TCP/ User Datagram Protocol (UDP) source and destination ports
● 802.1p priority
● Ethernet type
● Internet Control Message Protocol (ICMP) packets
● Internet Group Management Protocol (IGMP) packets
● Up to 1018 rules
Advanced Security
● IP Source Guard
● STP Root Guard
● Dynamic ARP Inspection
● DHCP Snooping
Availability
Link aggregation
● Link aggregation using IEEE 802.3ad LACP
● Up to 8 ports in up to 8 groups
Storm control
Broadcast and multicast storm protection
DoS prevention
DoS attack prevention
Spanning Tree
● IEEE 802.1D Spanning Tree
● IEEE 802.1w Rapid Spanning Tree
● IEEE 802.1s Multiple Spanning Tree, Fast Linkover
IGMP snooping
IGMP (versions 1 and 2) snooping limits bandwidth-intensive video traffic to only the requestors.
Supports 256 multicast groups.
Power redundancy
Connection to redundant power supply unit for power redundancy
QoS
Priority levels
4 hardware queues
Scheduling
Priority queuing and weighted round-robin (WRR)
Class of service
● Port based
● 802.1p VLAN priority based
● IPv4 IP precedence/ToS/DSCP based
● DiffServ
● Classification and re-marking ACLs
© 2008–2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 4 of 6
Data Sheet
Feature
Description
● Ingress policer
● Egress rate control
Rate limiting
Standards
802.3 10BASE-T Ethernet, 802.3u 100BASE-TX Fast Ethernet, 802.3ab 1000BASE-T Gigabit
Ethernet, 802.3z Gigabit Ethernet, 802.3x flow control, 802.3ad LACP, 802.3af POE, 802.1d Spanning
Tree Protocol (STP), 802.1Q/p VLAN, 802.1w Rapid STP, 802.1s Multiple STP, 802.1X port access
authentication
Environmental
Dimensions
WxHxD
17.32 x 14.70 x 1.73 in.
(440 x 375 x 44 mm)
Unit weight
15.85 lb (7.19 kg)
Certification
UL (UL 60950), CSA (CSA 22.2), CE Mark, FCC Part 15 (CFR 47) Class A
Operating temperature
32º to 104ºF (0º to 40ºC)
Storage temperature
–4º to 158ºF (–20º to 70ºC)
Operating humidity
10% to 90% relative humidity, noncondensing
Storage humidity
10% to 95% relative humidity, noncondensing
Number of fans
5
Acoustic noise
55 dB Max.
Power
100–240V AC, 50–60 Hz, internal, universal; also equipped with redundant power supply connector
for external power supply, 48V DC
Power consumption
● No PoE supplied: 12V at 8.5A (102W)
● 12 ports half power (7.5W):192W
● 12 ports full power (15W): 282W
● 24 ports half power (7.5W): 282W
Package Contents
● Cisco SGE2000P 24-Port Gigabit Switch
● Console cable
● AC power cord
● Rack-mount kit
● Quick installation guide
Minimum Requirements
● Web browser: Mozilla Firefox 1.5 or later, Internet Explorer 5.5 or later, Netscape 7.01 or later
● Category 5 Ethernet network cable
● TCP/IP protocol installed on each computer within the network
● Network adapter installed in each computer
● Network operating system
Product Warranty
5-year limited hardware warranty with return to factory replacement and 90-day limited software warranty
Cisco Limited Warranty for Cisco Small Business Series Products
This Cisco Small Business product comes with a 5-year limited hardware warranty with return to factory replacement
and a 90-day limited software warranty. In addition, Cisco offers software application updates for bug fixes and
telephone technical support at no charge for the first 12 months following the date of purchase. To download
software updates, go to: http://www.cisco.com/go/smallbiz.
Product warranty terms and other information applicable to Cisco products are available at
http://www.cisco.com/go/warranty.
For More Information
For more information on Cisco Small Business products and solutions, visit: http://www.cisco.com/smallbusiness.
© 2008–2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 5 of 6
Data Sheet
Printed in USA
© 2008–2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
C78-502070-04
07/10
Page 6 of 6