Hewlett Packard Enterprise A 5820-14XG-SFP+

HP A5820 Switch Series
Data sheet
Product overview
Key features
The HP A5820 Switch Series features advanced
flex-chassis switches that deliver a unique combination
of unmatched 10 Gigabit Ethernet, Fibre Channel
over Ethernet (FCoE) connectivity, high-availability
architecture, full Layer 2/3 dual-stack IPv4/v6, and
line-rate, low-latency performance on all ports.
Extensible embedded application capabilities enable
these switches to integrate services into the network,
consolidating devices and appliances to simplify
deployment and reduce power consumption and rack
space. Extremely versatile, the switches can be used in
high-performance, high-density building or department
cores as part of a consolidated network; for data
center top-of-rack server access; or as
high-performance Layer 3, 10-GbE aggregation
switches in campus and data center networks.
b
For enterprise core, distribution, data center
b
Up to 24 ports 10 GbE per unit / 194 per stack
b
Flex chassis—modular resiliency
b
Cut-through switching for very low latency
b
Hot-swappable I/O, power supplies, and fans
Features and benefits
Quality of Service (QoS)
• Powerful QoS feature: creates traffic classes
based on access control lists (ACLs), IEEE 802.1p
precedence, IP, DSCP or Type of Service (ToS)
precedence; supports filter, redirect, mirror, or
remark; supports the following congestion actions:
strict priority (SP) queuing, weighted round robin
(WRR), weighted fair queuing (WFQ), weighted
random early discard (WRED), weighted deficit
round robin (WDRR), and SP+WDRR
• Integrated network services: with support for
open application architecture (OAA) modules,
extends and integrates application capability into
the network
• Ring Resiliency Protection Protocol (RRPP):
provides fast recovery for ring Ethernet-based
topology; ensures consistent application
performance for applications such as VoIP
Management
• Remote configuration and management: is
available through a secure Web browser or a
command-line interface (CLI)
• IEEE 802.1ab LLDP discovery: advertises and
receives management information from adjacent
devices on a network
• USB support:
– File copy: allows users to copy switch files to
and from a USB flash drive
• DHCP options: server (RFC 2131), client,
snooping, and relay
• SNMPv1, v2c, and v3: facilitate centralized
discovery, monitoring, and secure management of
networking devices
• sFlow: provides scalable, ASIC-based, network
monitoring and accounting; this allows network
operators to gather a variety of sophisticated
network statistics and information for capacity
planning and real-time network monitoring purposes
• Network Time Protocol (NTP): synchronizes
timekeeping among distributed time servers and
clients; keeps consistent timekeeping among all
clock-dependent devices within the network so that
the devices can provide diverse applications based
on the consistent time
Connectivity
• High-density port connectivity: 194 10-GbE
ports with a 40 Gbps resilient backplane
• Data center I/O consolidation: the
A5820-14XG FCoE module supports two 4x8/4/2
Gbps FCoE modules (up to eight FC ports total) to
reduce cost and complexity while boosting network
performance
• Auto-MDIX: automatically adjusts for
straight-through or crossover cables on all 10/100
and 10/100/1000 ports
• Jumbo frames: on Gigabit and 10-Gigabit ports,
allow high-performance remote backup and
disaster-recovery services
• IPv6 native support:
– IPv6 host: enables switches to be managed and
deployed at the IPv6 network's edge
– Dual stack (IPv4/IPv6): transitions from IPv4
to IPv6, supporting connectivity for both protocols
– MLD snooping: forwards IPv6 multicast traffic to
the appropriate interface
– IPv6 ACL/QoS: supports ACL and QoS for IPv6
network traffic, preventing traffic flooding
– IPv6 routing: supports IPv6 static routes and
IPv6 versions of RIP, OSPF, IS-IS, Border Gateway
Protocol (BGP) routing protocols
Performance
• Hardware-based wire-speed access control
lists (ACLs): feature-rich ACL implementation
(TCAM based) helps ensure high levels of security
and ease of administration without impacting
network performance
• Unique Flex Chassis Architecture: supports the
best of both fixed chassis and modular
configurations
• Cut-through switching: delivers wire-speed,
line-rate performance on all ports, as well as
cut-through switching for low latency
Manageability
• Full-featured console: provides complete control
of the switch with a familiar command-line interface
(CLI)
• Web interface: allows configuration of the switch
from any Web browser on the network
• RMON and sFlow: provide advanced monitoring
and reporting capabilities for statistics, history,
alarms, and events
• Multiple configuration files: allow multiple
configuration files to be stored to flash image
2
• Troubleshooting:
• OSPF and OSPFv3 support: provides complete
support of OSPF for both IPv4 and IPv6
– Ingress and egress port monitoring enable network
problem solving
• IS-IS and IS-ISv6 support: provides complete
support of IS-IS for both IPv4 and IPv6
– Tracert and Ping enable testing of network
connectivity
• Layer 3 IPv6 routing: provides routing of IPv6 at
– Virtual Cable Tests provide visibility to cable
media speed; supports static routes, RIPng, OSPFv3,
problems
IS-ISv6, and BGP4+
Layer 2 switching
• GARP VLAN Registration Protocol (GVRP):
allows automatic learning and dynamic assignment
of VLANs
• 32K MAC addresses: provide access to many
Layer 2 devices
• 4094 port-based VLANs: provide security
between workgroups
• IEEE 802.1ad QinQ and Selective QinQ:
increase the scalability of an Ethernet network by
providing a hierarchical structure; connect multiple
LANs on a high-speed campus or metro network
• Gigabit Ethernet port aggregation: allows
grouping of ports to increase overall data
throughput to a remote device
• 10 GbE port aggregation: allows grouping of
ports to increase overall data throughput to a remote
device
• Spanning Tree/MSTP, RSTP, and STP Root
Guard: prevent network loops
• IPFIX/sFlow: allows traffic sampling
Layer 3 services
• Address Resolution Protocol (ARP):
determines the MAC address of another IP host in
the same subnet; supports static ARPs; gratuitous
ARP allows detection of duplicate IP addresses;
proxy ARP allows normal ARP operation between
subnets or when subnets are separated by a Layer 2
network
• Dynamic Host Configuration Protocol
(DHCP): simplifies the management of large IP
networks and supports client and server; DHCP
Relay enables DHCP operation across subnets
Layer 3 routing
• Layer 3 IPv4 routing: provides routing of IPv4 at
media speed; supports static routes, RIP and RIPv2,
OSPF, IS-IS, and BGP
• Routing Information Protocol (RIP) and
RIPng support: provides complete support of RIP
for both IPv4 and IPv6
• Bidirectional Forwarding Detection (BFD):
enables link connectivity monitoring and reduces
network convergence time for RIP, OSPF, BGP, IS-IS,
VRRP, MPLS, and IRF
• Virtual Router Redundancy Protocol (VRRP)
and VRRP Extended: allow quick failover of
router ports
• Policy-based routing: makes routing decisions
based on policies set by the network administrator
• IGMPv1, v2, and v3: allow individual hosts to
be registered on a particular VLAN
• PIM-SSM, PIM-DM, and PIM-SM (for IPv4
and IPv6): support IP Multicast address
management and inhibition of DoS attacks
• Equal-Cost Multipath (ECMP): enables multiple
equal-cost links in a routing environment to increase
link redundancy and scale bandwidth
Security
• Defense-in-depth security: provides integrated
and distributed security enforcement that can be
managed from a central location, such as the HP
Intelligent Management Center (IMC)
• Advanced processor queuing mechanism:
helps prevent denial-of-service (DoS) attacks, while
DHCP snooping helps ensure that devices can only
receive an IP address from a legitimate DHCP server
on the network
• RADIUS/HWTACACS: eases switch management
security administration by using a password
authentication server
• Secure Shell (SSHv2): encrypts all transmitted
data for secure, remote command-line interface (CLI)
access over IP networks
• IEEE 802.1X-based dynamic delivery of
QoS, ACLs, and VLANs: allows complete control
over user network access
• Guest VLAN: similar to IEEE 802.1X, it provides a
browser-based environment to authenticated clients
• Port isolation: secures and adds privacy, and
prevents malicious attackers from obtaining user
information
3
• Port security: allows access only to specified
MAC addresses, which can be learned or specified
by the administrator
Additional information
• Intelligent Resilient Framework (IRF):
• MAC-based authentication: allows or denies
access to the switch based on client MAC address
– Creates virtual resilient switching fabrics, where
two or more switches perform as a single Layer 2
switch, and Layer 3 router
• IP source guard: helps prevent IP spoofing
attacks
– Switches do not have to be co-located and can be
part of a disaster recovery system
• HTTPS management: provides secure Web
management
– Servers or switches can be attached using
standard LACP for automatic load balancing and
high availability
• URPF: limits malicious traffic on a network
• Multi-Customer Edge (MCE)-Multicast
Virtual Routing and Forwarding (MVRF):
provide MPLS Edge router support
• Public Key Infrastructure (PKI): is used to
control access
Convergence
• Voice VLAN: automatically assigns VLAN and
priority for IP phones, simplifying network
configuration and maintenance
– Simplifies network operation by eliminating the
complexity of Spanning Tree, ECMP, or VRRP
• OAA modules: support wireless network
management and high-performance security
applications; leverage network infrastructure
investment
• Green IT and power: use the latest advances in
silicon development, shut off unused ports, and use
variable-speed fans to improve power efficiency
Warranty and support
• LLDP-MED: is a standard extension that
automatically configures network devices, including
LLDP-capable IP phones
• 1-year warranty: with advance replacement
and 10-calendar-day delivery (available in most
countries)
• Internet Group Management Protocol
(IGMP): is used by IP hosts to establish and
maintain multicast groups; supports v1, v2, and v3;
utilizes Any-Source Multicast (ASM) or
Source-Specific Multicast (SSM) to manage IPv4
multicast networks
• Electronic and telephone support: limited
electronic and telephone support is available from
HP; refer to www.hp.com/networking/warranty for
details on the support provided and the period
during which support is available
• Software releases: refer to
www.hp.com/networking/warranty for details on
• Protocol Independent Multicast (PIM): is used
the software releases provided and the period
for IPv4 and IPv6 multicast applications; supports
during which software releases are available for
PIM dense mode (DM), sparse mode (SM), and
your product(s)
source-specific mode (SSM)
Monitor and diagnostics
• Port mirroring: enables traffic on a port to be
simultaneously sent to a network analyzer for
monitoring
• OAM (802.3ah): detects data link layer problems
that occurred in the “last mile"; monitors the status of
the link between the two devices
• CFD (802.1ag): connectivity fault detection (CFD)
provides a Layer 2 link OAM (operations,
administration, and maintenance) mechanism used
for link connectivity detection and fault locating
4
HP A5820 Switch Series
Specifications
Ports
HP A5820X-14XG-SFP+ Switch with 2 Interface Slots and 1 OAA Slot (JC106A)
HP A5820X-24XG-SFP+ Switch (JC102A)
14 SFP+ 10-GbE ports; Duplex: full only
24 SFP+ 10-GbE ports; Duplex: full only
2 extended module slots
4 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE
802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
1 open module slot
1 RJ-45 serial console port
4 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE
802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
Supports a maximum of 24 SFP+ ports plus 4 autosensing 10/100/1000 ports
1 RJ-45 serial console port
Supports a maximum of 14 SFP+ ports plus 8 8/4/2 Gbps Fibre Channel SFP+
ports, with optional module
Power supplies
2 power-supply slots
1 minimum power-supplies required (ordered separately)
2 power-supply slots
1 minimum power-supplies required (ordered separately)
Fan tray
includes: 1 x JC096A
1 fan tray slot
Base product includes fan tray
includes: 1 x JC096A
1 fan tray slot
Base product includes fan tray
Physical characteristics
Dimensions
18.39(d) x 17.32(w) x 3.39(h) in. (46.7 x 43.99 x 8.61 cm) (2U height)
16.81(d) x 17.32(w) x 1.73(h) in. (42.7 x 44.0 x 4.4 cm) (1U height)
Weight
33.29 lb. (15.1 kg)
18.74 lb. (8.5 kg)
Memory and processor
512 MB SDRAM, 512 MB flash; packet buffer size: 2 MB
512 MB SDRAM, 512 MB flash; packet buffer size: 2 MB
Performance
Throughput
up to 363 million pps (64-byte packets)
up to 363 million pps (64-byte packets)
Routing/Switching capacity
488 Gbps
488 Gbps
Routing table size
12000 entries
12000 entries
MAC address table size
32000 entries
32000 entries
Environment
Operating temperature
32°F to 113°F (0°C to 45°C)
32°F to 113°F (0°C to 45°C)
Operating relative humidity
10% to 90%, noncondensing
10% to 90%, noncondensing
Electrical characteristics
Maximum heat dissipation
836 BTU/hr (881.98 kJ/hr)
631 BTU/hr (665.71 kJ/hr)
Voltage
100-120 / 200-240 VAC
100-120 / 200-240 VAC
Frequency
50 / 60 Hz
50 / 60 Hz
Safety
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety
of Laser Products-Part 2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel;
ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J; NOM; ROHS
Compliance
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety
of Laser Products-Part 2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel;
ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J; NOM; ROHS
Compliance
Emissions
VCCI Class A; EN 55022 Class A; ICES-003 Class A; ANSI C63.4 2003;
AS/NZS CISPR22 Class A; EN 61000-3-2:2006; EN 61000-3-3:1995
+A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15)
Class A
VCCI Class A; EN 55022 Class A; ICES-003 Class A; ANSI C63.4 2003;
AS/NZS CISPR22 Class A; EN 61000-3-2:2006; EN 61000-3-3:1995
+A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15)
Class A
Immunity
Generic
ETSI EN 300 386 V1.3.3
ETSI EN 300 386 V1.3.3
EN
EN 55024:1998+ A1:2001 + A2:2003
EN 55024:1998+ A1:2001 + A2:2003
ESD
EN 61000-4-2; IEC 61000-4-2
EN 61000-4-2; IEC 61000-4-2
Radiated
EN 61000-4-3; IEC 61000-4-3
EN 61000-4-3; IEC 61000-4-3
EFT/Burst
EN 61000-4-4; IEC 61000-4-4
EN 61000-4-4; IEC 61000-4-4
Surge
EN 61000-4-5; IEC 61000-4-5
EN 61000-4-5; IEC 61000-4-5
Conducted
EN 61000-4-6; IEC 61000-4-6
EN 61000-4-6; IEC 61000-4-6
Power frequency magnetic field
IEC 61000-4-8; EN 61000-4-8
IEC 61000-4-8; EN 61000-4-8
Voltage dips and interruptions
EN 61000-4-11; IEC 61000-4-11
EN 61000-4-11; IEC 61000-4-11
Harmonics
EN 61000-3-2, IEC 61000-3-2
EN 61000-3-2, IEC 61000-3-2
Flicker
EN 61000-3-3, IEC 61000-3-3
EN 61000-3-3, IEC 61000-3-3
Management
IMC - Intelligent Management Center; command-line interface; Web browser;
SNMP Manager; Telnet; HTTPS; RMON1; FTP
IMC - Intelligent Management Center; command-line interface; Web browser;
SNMP Manager; Telnet; HTTPS; RMON1; FTP
Notes
Customer must order a power supply, as the device does not come with a PSU.
At least one JC087A or JC090A is required.
Customer must order a power supply, as the device does not come with a PSU.
At least one JC087A or JC090A is required.
5
HP A5820 Switch Series
Specifications (continued)
Services
Standards and protocols
(applies to all products in series)
HP A5820X-14XG-SFP+ Switch with 2 Interface Slots and 1 OAA Slot (JC106A)
HP A5820X-24XG-SFP+ Switch (JC102A)
3-year, parts only, global next-day advance exchange (UY832E)
3-year, 4-hour onsite, 13x5 coverage for hardware (UV894E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UV897E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
support (UV900E)
3-year, 24x7 SW phone support, software updates (UV903E)
Installation with minimum configuration, system-based pricing (UW451E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV895E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV898E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UV901E)
4-year, 24x7 SW phone support, software updates (UV904E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV896E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV899E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UV902E)
5-year, 24x7 SW phone support, software updates (UV905E)
3 Yr 6 hr Call-to-Repair Onsite (UW972E)
4 Yr 6 hr Call-to-Repair Onsite (UW973E)
5 Yr 6 hr Call-to-Repair Onsite (UW974E)
3-year, parts only, global next-day advance exchange (UY832E)
3-year, 4-hour onsite, 13x5 coverage for hardware (UV894E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UV897E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
support (UV900E)
3-year, 24x7 SW phone support, software updates (UV903E)
Installation with minimum configuration, system-based pricing (UW451E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV895E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV898E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UV901E)
4-year, 24x7 SW phone support, software updates (UV904E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV896E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV899E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UV902E)
5-year, 24x7 SW phone support, software updates (UV905E)
3 Yr 6 hr Call-to-Repair Onsite (UW972E)
4 Yr 6 hr Call-to-Repair Onsite (UW973E)
5 Yr 6 hr Call-to-Repair Onsite (UW974E)
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services and
response times in your area, please contact your local HP sales office.
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services and
response times in your area, please contact your local HP sales office.
General protocols
IEEE 802.1ag Service Layer OAM
IEEE 802.1D MAC Bridges
IEEE 802.1p Priority
IEEE 802.1Q VLANs
IEEE 802.1s (MSTP)
IEEE 802.1v VLAN classification by Protocol and
Port
IEEE 802.1w Rapid Reconfiguration of Spanning
Tree
IEEE 802.1X PAE
IEEE 802.3ad Link Aggregation Control Protocol
(LACP)
IEEE 802.3ae 10-Gigabit Ethernet
IEEE 802.3x Flow Control
RFC 768 UDP
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 854 TELNET
RFC 925 Multi-LAN Address Resolution
RFC 951 BOOTP
RFC 1058 RIPv1
RFC 1350 TFTP Protocol (revision 2)
RFC 1519 CIDR
RFC 1542 BOOTP Extensions
RFC 2131 DHCP
RFC 2453 RIPv2
RFC 3046 DHCP Relay Agent Information Option
RFC 3576 Ext to RADIUS (CoA only)
RFC 3768 VRRP
RFC 4675 RADIUS VLAN & Priority
802.1r - GARP Proprietary Attribute Registration
Protocol (GPRP)
IP multicast
RFC 2934 Protocol Independent Multicast MIB for
IPv4
RFC 3376 IGMPv3 (host joins only)
RFC 3618 Multicast Source Discovery Protocol
(MSDP)
RFC 3973 Draft 2 PIM Dense Mode
RFC 4601 Draft 10 PIM Sparse Mode
IPv6
RFC 2080 RIPng for IPv6
RFC 2460 IPv6 Specification
RFC 2710
IPv6
RFC 2740
RFC 2925
RFC 3019
RFC 3162
RFC 3315
RFC 3315
RFC 3810
RFC 4022
RFC 4251
RFC 4252
RFC 4253
RFC 4254
RFC 4293
RFC 4419
RFC 4443
RFC 4541
RFC 4861
RFC 4862
Multicast Listener Discovery (MLD) for
OSPFv3 for IPv6
Remote Operations MIB (Ping only)
MLDv1 MIB
RADIUS and IPv6
DHCPv6 (client and relay)
DHCPv6 (client only)
MLDv2 (host joins only)
MIB for TCP
SSHv6 Architecture
SSHv6 Authentication
SSHv6 Transport Layer
SSHv6 Connection
MIB for IP
Key Exchange for SSH
ICMPv6
IGMP & MLD Snooping Switch
IPv6 Neighbor Discovery
IPv6 Stateless Address Auto-configuration
MIBs
IEEE8021-PAE-MIB
IEEE8023-LAG-MIB
RFC 1213 MIB II
RFC 1493 Bridge MIB
RFC 1657 BGP-4 MIB
RFC 1724 RIPv2 MIB
RFC 1850 OSPFv2 MIB
RFC 2011 SNMPv2 MIB for IP
RFC 2013 SNMPv2 MIB for UDP
RFC 2233 Interface MIB
RFC 2273 SNMP-NOTIFICATION-MIB
RFC 2452 IPV6-TCP-MIB
RFC 2454 IPV6-UDP-MIB
RFC 2465 IPv6 MIB
RFC 2466 ICMPv6 MIB
RFC 2571 SNMP Framework MIB
RFC 2572 SNMP-MPD MIB
RFC 2573 SNMP-Notification MIB
RFC 2618 RADIUS Client MIB
RFC 2620 RADIUS Accounting MIB
RFC 2665 Ethernet-Like-MIB
RFC 2674 802.1p and IEEE 802.1Q Bridge MIB
RFC 2688 MAU-MIB
RFC 2787 VRRP MIB
RFC 2819 RMON MIB
RFC 2925 Ping MIB
RFC 3414 SNMP-User based-SM MIB
RFC 3415 SNMP-View based-ACM MIB
RFC 3418 MIB for SNMPv3
RFC 3621 Power Ethernet MIB
RFC 3826 AES for SNMP's USM MIB
RFC 4133 Entity MIB (Version 3)
LLDP-EXT-DOT1-MIB
LLDP-EXT-DOT3-MIB
LLDP-MIB
Network management
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
RFC 2819 Four groups of RMON: 1 (statistics), 2
(history), 3 (alarm) and 9 (events)
RFC 3176 sFlow
ANSI/TIA-1057 LLDP Media Endpoint Discovery
(LLDP-MED)
SNMPv1/v2c/v3
OSPF
RFC 2328 OSPFv2
RFC 3101 OSPF NSSA
Security
IEEE 802.1X Port Based Network Access Control
RFC 1492 TACACS+
RFC 2865 RADIUS (client only)
RFC 2866 RADIUS Accounting
Secure Sockets Layer (SSL)
SSHv2 Secure Shell
6
HP A5820 Switch Series accessories
Modules
HP A5820X/A5800 4-port 10-GbE SFP+ Module (JC091A)
HP A5820X/A5800 2-port 10-GbE SFP+ Module (JC092B)
Transceivers
HP X124 1G SFP LC LH40 1310nm Transceiver (JD061A)
HP X125 1G SFP LC LH70 Transceiver (JD063B)
HP X120 1G SFP LC SX Transceiver (JD118B)
NEW HP 30 m PremierFlex OM3+ LC/LC Optical Cable
(BK842A)
NEW HP 50 m PremierFlex OM3+ LC/LC Optical Cable
(BK843A)
Power Supply
HP A5820/A5800 300W AC Power Supply (JC087A)
HP A5820/A5800 300W DC Power Supply (JC090A)
HP X120 1G SFP LC LX Transceiver (JD119B)
Fan Tray
HP X120 1G SFP LC LH40 1550nm Transceiver (JD062A)
HP A5800 2RU Spare Fan Assembly (JC096A)
HP X130 SFP+ LC SR Transceiver (JD092B)
HP A5800 1RU Spare Fan Assembly for A5800-24G-SFP
Switch with 1 Interface Slot (JC098A)
HP X130 SFP+ LC LRM Transceiver (JD093B)
HP X130 SFP+ LC LR Transceiver (JD094B)
License
HP X240 SFP+ SFP+ 0.65 m Direct Attach Cable (JD095B)
HP A-WX5000 32 AP License Upgrade (JD463A)
HP X240 SFP+ SFP+ 1.2 m Direct Attach Cable (JD096B)
WLAN
HP X240 SFP+ SFP+ 3 m Direct Attach Cable (JD097B)
HP A5800 Access Controller OAA Module (JD441A)
Cables
NEW HP 0.5 m PremierFlex OM3+ LC/LC Optical Cable
(BK837A)
NEW HP 1 m PremierFlex OM3+ LC/LC Optical Cable
HP A5820X-14XG-SFP+ Switch with 2
Interface Slots and 1 OAA Slot (JC106A)
(BK838A)
HP 4-port 8/4/2 Gbps FCoE SFP+ A5820 Module
(JC530A)
NEW HP 2 m PremierFlex OM3+ LC/LC Optical Cable
HP A5800 Access Controller OAA Module (JD441A)
(BK839A)
NEW HP 5 m PremierFlex OM3+ LC/LC Optical Cable
(BK840A)
NEW HP 15 m PremierFlex OM3+ LC/LC Optical Cable
(BK841A)
To learn more, visit www.hp.com/networking
© Copyright 2010-2011 Hewlett-Packard Development Company, L.P. The information contained herein is
subject to change without notice. The only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing herein should be construed as
constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained
herein.
4AA3-0739ENW, Created August 2010; Updated February 2011, Rev. 2