ENCORE ENPSWI-2012 print server

3-Port Wireless Print Server
Model Number:
ƒ ENPSWI-2012
Interfaces
USB*: 2 x USB 2.0 High-Speed-compliant ports, supporting 1.5Mbps (low speed), 12Mbps
(full speed), and 480Mbps (high-speed) data transmission rates. This port automatically
detects the make and model of the USB printer.
Parallel: 1 DB-25-pin female Centronics port, supporting bi-directional communication
LAN: 1 Compliant with IEEE 802.3/802.3u standard, 10/100Mbps auto-sensing, RJ-45 (UTP)
connector
Wireless LAN: Complies with IEEE 802.11b & 802.11g standards, supporting Ad-Hoc and
Infrastructure modes
* This product does not support use of USB hubs for daisy-chained connection, USB-to-Parallel
connectors, or USB cable extenders.
Key Software Specification
Easy-to-Use Windows Setup Wizard
Yes (Network Print Server Setup Wizard)
Network Operating System Support
Windows® 95/98/98SE/Me, Windows® NT
4.0/2000/XP, Windows Vista™, Mac® OS 8.1
or higher, UNIX/Linux, NetWare (Bindery/NDS)
Network Protocol Support*
TCP/IP, IPX/SPX, NetBEUI, AppleTalk, LPR,
SMB (over IP)
Internet Printing Protocol (IPP) Support
Yes
Windows Print Monitor Technology
Yes
1
DHCP (client) Support
Yes
Default IP Address
192.168.0.10; DHCP: off
Management
1. Web Interface
2. Windows-based Setup Program
Software Upgradeable
Yes (Web browser and TFTP)
HP Web JetAdmin Support
Yes
E-Mail Alert Support
Yes
Job Log Support
Yes
Firmware Upgradeable
1. Web interface
2. Windows-based Setup Program
3. TFTP
Hardware Specification
CPU
RDC R2886 @150MHz
Flash
1Mbytes
System Memory
2Mbytes SDRAM*
Wireless
802.11g(b) miniPCI module
USB Port
2 x USB 2.0 high-speed-compliant port, supporting USB 1.1 standard
and bi-directional communication
Parallel Port
1 DB-25-pin male Centronics port, supporting bi-directional
communication
LAN Port
1 10/100Mbps auto-sensing, RJ-45 (UTP) connector
Reset/Load Default
Yes
Button
LED Function
Counter
Remark
Power
1
Green
Status
1
RED
LAN 10/100
2 (G/Y)
Green for 100Mbps, Yellow for 10Mbps
Parallel port
1
Green
USB port 1
2 (G/Y)
Green for Hi-Speed, Yellow for other
USB port 2
2 (G/Y)
Green for Hi-Speed, Yellow for other
WLAN
Blinking
(Green)
Others
PCB Size
153 x 90 mm (tolerance: +/-1 mm)
Power Supply
Output: 5VDC, 2A (Switching)*, Input: 100-240V full range
2
EMI Certifications
CE / FCC Class B
Temperature
Operating:0 ~ 50℃; Storage:-5 ~ 65 ℃
Humidity
Operating:0 ~ 70%; Storage:0 ~ 80%
Wireless
Feature
Detailed Description
Host Interface
miniPCI
Operation Voltage
3.3V +/- 10%
Frequency Range
2.400~ 2.4835Ghz
Channel Support
US/Canada: 11 (1~11) Europe: 13 (1~13) France: 4 (10~13)
Japan: 13 (1~13)
Standard Compliance
802.11b, 802.11g
Modulation
802.11b: DSSS; 802.11g: OFDM
Receiver Sensitivity
54Mbps OFDM @10% PER = -68dBm
(Typical value)
11Mbps DSSS @8% PER = -82dBm
Output Power (estimated)
802.11b: 11Mbps 17.5+/-1 dBm
802.11g: 54Mbps 14.0+/-1 dBm
Transmission Rate
802.11b: 1, 2, 5.5, 11Mbps;
802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps
Wireless Client Mode
Ad-Hoc and Infrastructure mode
WEP: 64/128-bit
Wireless Security
WPA: WPA-PSK (TKIP, AES)
Operation Range (estimated)
Indoor: 20m @54Mbps 60m @18Mbps 75m @11Mbps
Outdoor: 50m @54Mbps 150m @18Mbps 180m @11Mbps
* It could be changed by design.
EMC & Safety
Feature
EMI Certification
Detailed Description
CE, FCC class B
The specification is subject to change without prior notice.
3