ENCORE ENPSWI-2012 print server Datasheet


Add to my manuals
3 Pages

advertisement

ENCORE ENPSWI-2012 print server Datasheet | Manualzz

3-Port Wireless Print Server

Model Number:

ƒ ENPSWI-2012

Interfaces

USB*: 2

x

USB 2.0 High-Speed-compliant ports, supporting 1.5Mbps (low speed), 12Mbps

(full speed), and 480Mbps (high-speed) data transmission rates. This port automatically detects the make and model of the USB printer.

Parallel: 1 DB-25-pin female Centronics port, supporting bi-directional communication

LAN: 1 Compliant with IEEE 802.3/802.3u standard, 10/100Mbps auto-sensing, RJ-45 (UTP) connector

Wireless LAN: Complies with IEEE 802.11b & 802.11g standards, supporting Ad-Hoc and

Infrastructure modes

* This product does not support use of USB hubs for daisy-chained connection, USB-to-Parallel connectors, or USB cable extenders.

Key Software Specification

Easy-to-Use Windows Setup Wizard Yes (Network Print Server Setup Wizard)

Network Operating System Support

Network Protocol Support *

Internet Printing Protocol (IPP) Support

Windows® 95/98/98SE/Me, Windows® NT

4.0/2000/XP, Windows Vista™, Mac® OS 8.1 or higher, UNIX/Linux, NetWare (Bindery/NDS)

TCP/IP, IPX/SPX, NetBEUI, AppleTalk, LPR,

SMB (over IP)

Yes

Windows Print Monitor Technology Yes

1

DHCP (client) Support

Default IP Address

Yes

192.168.0.10; DHCP: off

Software Upgradeable

HP Web JetAdmin Support

E-Mail Alert Support

Job Log Support

Firmware Upgradeable

2. Windows-based Setup Program

Yes (Web browser and TFTP)

Yes

Yes

Yes

1. Web interface

2. Windows-based Setup Program

3. TFTP

Hardware Specification

CPU RDC R2886 @150MHz

Flash 1Mbytes

System Memory 2Mbytes SDRAM*

Wireless

USB Port

802.11g(b) miniPCI module

2 x USB 2.0 high-speed-compliant port, supporting USB 1.1 standard and bi-directional communication

Parallel Port

LAN Port

1 DB-25-pin male Centronics port, supporting bi-directional communication

1 10/100Mbps auto-sensing, RJ-45 (UTP) connector

Reset/Load Default

Button

Yes

LED Function Counter Remark

Power 1 Green

Status 1 RED

LAN 10/100 2 (G/Y) Green for 100Mbps, Yellow for 10Mbps

Parallel port

USB port 1

USB port 2

1

2 (G/Y)

2 (G/Y)

Green

Green for Hi-Speed, Yellow for other

Green for Hi-Speed, Yellow for other

WLAN

Blinking

(Green)

Others

PCB Size

Power Supply

153 x 90 mm (tolerance: +/-1 mm)

Output: 5VDC, 2A (Switching)*, Input: 100-240V full range

2

EMI Certifications CE / FCC Class B

Temperature Operating:0 ~ 50℃; Storage:-5 ~ 65 ℃

Humidity Operating:0 ~ 70%; Storage:0 ~ 80%

Wireless

Feature

Host Interface

Operation Voltage

Frequency Range

Channel Support

Detailed Description miniPCI

3.3V +/- 10%

2.400~ 2.4835Ghz

US/Canada: 11 (1~11) Europe: 13 (1~13) France: 4 (10~13)

Japan: 13 (1~13)

Standard Compliance

Modulation

802.11b, 802.11g

802.11b: DSSS; 802.11g: OFDM

Receiver Sensitivity

(Typical value)

Output Power (estimated)

54Mbps OFDM @10% PER = -68dBm

11Mbps DSSS @8% PER = -82dBm

802.11b: 11Mbps 17.5+/-1 dBm

802.11g: 54Mbps 14.0+/-1 dBm

Transmission Rate

Wireless Client Mode

802.11b: 1, 2, 5.5, 11Mbps;

802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps

Ad-Hoc and Infrastructure mode

Wireless Security

WEP: 64/128-bit

WPA: WPA-PSK (TKIP, AES)

Operation Range (estimated) Indoor: 20m @54Mbps 60m @18Mbps 75m @11Mbps

Outdoor: 50m @54Mbps 150m @18Mbps 180m @11Mbps

* It could be changed by design.

EMC & Safety

Feature Detailed Description

EMI Certification CE, FCC class B

The specification is subject to change without prior notice.

3

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement