Enterasys B5G124-48 network switch

DATASHEET
B-Series B5
Gigabit Ethernet Stackable Edge Switch
Future-proofed with 802.3at high-power PoE support
Automatic discovery and deployment
of VoIP services
High-availability stacking assures
reliable network operations
Automated management features
reduce operational costs
Investment protection via
comprehensive lifetime warranty
1.47 Tbps capacity and 809.5 Mpps
Benefits
Business Alignment
• Aligns network resource utilization with
business goals and priorities
• Reliable network operation for missioncritical applications
Operational Efficiency
• Management automation capabilities
reduce network operational expenses
• Automatic discovery and deployment
of VoIP services
Product Overview
Security
The Enterasys B5 is a scalable, high-performance Gigabit Ethernet switch that provides support
for the bandwidth-intensive and latency-sensitive requirements of today’s demanding business
applications. The B5 is an excellent choice for environments that require complete multilayer switching capabilities and support for high density 10/100/1000 Ethernet ports, cost
effective10GE uplinks, dual IPv4/IPv6 management, basic routing and policy-based automation
capabilities for advanced edge deployments.
• Ability to audit network for adherence
to compliance regulations, such as PCI
or HIPAA
The B5 incorporates the new 802.3at high-power PoE on all ports, translating into increased
power provisioning for power-hungry devices such as Pan/Tilt/Zoom (PTZ) IP surveillance cameras,
IP videophones, third party 802.11n access points and virtual desktops. Built-in high-power PoE
support is a cost effective alternative for customers in place of purchasing separate PoE midspans,
which can take away valuable rack space, add cost and contribute more cabling to the wiring closet.
The B5 provides high port density in a 1U footprint and is environmentally friendly by design. The
B5’s overall energy efficiency is further enhanced by a low current draw and an extreme tolerance
for high environmental temperatures. A highly-scalable architecture and a comprehensive lifetime
warranty ensure that a B5 network investment will sustain a secure, feature-rich and cost-effective
network well into the future.
• Network resources securely allocated
according to user roles
• Network security maintained
concurrently with user mobility
Support and Service
• Industry-leading customer satisfaction
and first call resolution rates
• Personalized services, including site
surveys, network design, installation,
and training
• Comprehensive lifetime warranty,
including feature upgrades and more
The B5’s highly customizable Layer 2/3/4 packet classification capabilities work together with
the 8 hardware-based priority queues associated with each Ethernet port to support a suite of
differentiated services with as many as 8 distinct priority levels to provide guaranteed Quality
of Service (QoS) for critical voice and video network traffic. In conjunction with its non-blocking
L2 switching and L3 routing architecture, the B5’s intelligent queuing mechanisms ensure that
mission-critical applications receive prioritized access to network resources.
There is nothing more important
than our customers.
Reliability and Availability
The B5 design incorporates redundancy and failure protection
mechanisms complete with automatic failover and recovery capabilities
to provide a reliable network. An integral power supply is the primary
source of power for the B5 and complete power redundancy is provided
by an optional external power supply. A virtual switch can be created
by interconnecting as many as eight B5s in a single stack, which
can be managed via a single IP address with redundant management
connections. The B5’s closed-loop stacking capability utilizes bidirectional switch interconnects to maintain connectivity within the
virtual switch despite any physical failures, which includes switches,
cables and connections. Up to eight Ethernet ports can be grouped
together to create a multi-link aggregation group (LAG). A LAG’s Ethernet
ports can be co-located on a single B5 or they can be distributed
across multiple B5s within a stack to prevent a switch-level failure from
disrupting data communications.
Advanced Quality of Service
Robust Quality of Service (QoS) features enable strong support for
integrated multimedia networks, as well as all types of data-intensive
applications. The B5 is a standards-based solution optimized for
multimedia applications, including VoIP, videoconferencing and real-time
collaboration. The B5 uses multiple standards-based discovery methods
with Enterasys policy capabilities to automatically identify and provision
VoIP services for IP phones from all major vendors. B5 switches provide
dynamic mobility for VoIP clients to reduce operating costs; when an IP
phone moves and plugs in elsewhere in the enterprise network, its VoIP
service provisioning, security and traffic priority settings move with it, with
no manual administration required.
Security
The B5 enables strong network security by utilizing its authentication and
security features, which can be applied at the port level or at the user
level. Making use of the Enterasys Network Management Suite’s Policy
Manager or a standard CLI, the Enterasys role-based architecture enables
a network administrator to define distinct roles or profiles that represent
operational groups within a business (e.g., employee, executive, guest,
etc). Multiple users/devices per port can be authenticated via IEEE
802.1X, MAC address, or web authentication, and then assigned a predefined operational role.
Administrators can easily transition from RFC 3580 and complex
access control list (ACL) deployments to the Enterasys role-based policy
framework in a seamless fashion, without the need to make changes
to their RADIUS infrastructure (e.g., adding filter-ID). In addition, the
B5 also supports ACLs for supplementary network security. Network
operations can be easily tailored to meet business-oriented requirements
by providing each role with individualized access to network services and
applications (e.g., a guest should have different network access privileges
than an employee).
The B5 allows administrators even more network visibility, with the ability
to audit their network for adherence to compliance regulations, such
as PCI or HIPAA. The B5 is able to segment roles down to group levels,
such as supporting a guest access role, helping to protect corporate
applications and information.
Investment Protection
The B5 is a cost-effective, feature-rich, stackable switch that provides
a broad set of features today and will continue to deliver benefits well
into the future. All B-Series products include a lifetime warranty that
includes warranty and support services for which many competitors
charge additional fees – adding up to 10% of initial deployment costs on
an annual basis. Included benefits, such as advanced hardware return,
firmware feature upgrades (which most vendors cover at most for 90
days) and telephone support (which most don’t include or severely limit)
combine to significantly decrease operational costs for customers over
the life of their network. For more information regarding warranty terms
and conditions please go to http://www.enterasys.com/support/warranty.aspx.
Performance & Scalability
The B5, with support for 32,000 MAC addresses, provides scalable,
wire-rate performance in support of the bandwidth-intensive and delaysensitive requirements of today’s demanding applications. Along with a
switch capacity of 184 Gbps, the B5 provides up to 48 10/100/1000
Ethernet ports as well as two 10 GE ports. Leveraging the B5’s stacking
capability, as many as 8 B5s (both 24-port and 48-port combinations)
can be interconnected in a single stack to create a virtual switch that
provides 1.47 Tbps of capacity and up to 384 10/100/1000 Ethernet
ports as well as 16 10GE uplink ports.
Page 2
Features / Standards and Protocols
MAC Address Table Size
32,000
VLANs
4,093 VLAN IDs
1,024 VLAN Entries per Stack
Embedded Services
Ingress Rate Limiting
IP TOS Rewrite
Layer 2/3/4 Classification
Multi-layer Packet Processing
Switching Services
IEEE 802.1AB – LLDP
ANSI/TIA-1057 – LLDP-MED
IEEE 802.1D – MAC Bridges
IEEE 802.1s – Multiple Spanning Trees
IEEE 802.1t – 802.1D Maintenance
IEEE 802.1w – Rapid Spanning Tree
Reconvergence
IEEE 802.3 – Ethernet
IEEE 802.3ab – GE over Twisted Pair
IEEE 802.3ad – Link Aggregation
IEEE 802.3ae – 10 Gigabit Ethernet (fiber)
IEEE 802.3af – PoE
IEEE 802.3at – High Power PoE
(up to 30W per port)
IEEE 802.3i – 10Base-T
IEEE 802.3u – 100Base-T, 100Base-FX
IEEE 802.3z – GE over Fiber
Full/half duplex auto-sense support on all ports
IGMP Snooping v1/v2/v3
Jumbo Frame support (9,216 bytes)
Loop Protection
One-to-One and Many-to-One Port Mirroring
Port Description
Protected Ports
Host Protect – Broadcast/ Multicast/ Unknown
Unicast Suppression
Spanning Tree Backup Root
STP Pass-Thru
VLAN Support
Generic Attribute Registration Protocol (GARP)
Generic VLAN Registration Protocol (GVRP)
IEEE 802.1p – Traffic classification
IEEE 802.1q – VLAN Tagging
Protocol-based VLANs with Enterasys Policy
IEEE 802.3ac – VLAN Tagging Extensions
Port-based VLAN (private port/private VLAN)
Tagged-based VLAN
VLAN Marking of Mirror Traffic
Quality of Service
8 Priority Queues per Port
802.3x Flow Control
Class of Service (CoS)
IP Precedence
IP Protocol
Queuing Control – Strict and
Weighted Round Robin
Source/Destination IP Address
Source/Destination MAC Address
Security
ARP Spoof Protection
DHCP Spoof Protection
Dynamic and Static MAC Locking
EAP Pass Thru
Hybrid Mode
IEEE 802.1X Port Authentication
MAC-based Port Authentication
RADIUS Accounting for network access
RADIUS Client
RFC 3580 – IEEE 802.1X RADIUS Usage
Guidelines
Multi-user Authentication
Password Encryption
Secure Networks Policy
Secured Shell (SSHv2)
Secured Socket Layer (SSL)
User and IP Phone Authentication
Web-based Port Authentication
IPv4 Routing
Standard Access Control List (ACLs)
Extended ACLs
VLAN-based ACLs
ARP & ARP Redirect
IP Helper Address
RFC 826 – Ethernet ARP
RFC 1058 – RIP v1
RFC 1256 – ICMP Router Discovery Messages
RFC 1724 – RIPv2 MIB Extension
RFC 2236 – IGMPv2
RFC 2453 – RIP v2
RFC 3046 – DHCP/BootP Relay
Static Routes
MIB Support
Enterasys Entity MIB
Enterasys Policy MIB
Enterasys VLAN Authorization MIB
ANSI/TIA-1057 – LLDP-MED MIB
IEEE 802.1AB – LLDP MIB
IEEE 802.1X MIB – Port Access
IEEE 802.3ad MIB – LAG MIB
RFC 826 – ARP and ARP Redirect
RFC 951, RFC 1542 – DHCP/BOOTP Relay
RFC 1213 – MIB/MIB II
RFC 1493 – BRIDGE-MIB
RFC 1643 – Ethernet-like MIB
RFC 2096 – IP Forwarding Table MIB
RFC 2131, RFC 3046 – DHCP Client/Relay
RFC 2271 – SNMP Framework MIB
RFC 2466 – ICMPv6 MIB
RFC 2613 – SMON MIB
RFC 2618 – RADIUS Authentication
Client MIB
RFC 2620 – RADIUS Accounting Client MIB
RFC 2668 – Managed Object Definitions for
802.3 MAUs
RFC 2674 – P-BRIDGE-MIB
RFC 2674 – QBRIDGE-MIB VLAN
Bridge MIB
RFC 2737 – Entity MIB (physical branch only)
RFC 2819 – RMON-MIB
RFC 2863 – IfMIB
RFC 2933 – IGMP MIB
RFC 3413 – SNMP v3 Applications MIB
RFC 3414 – SNMP v3 User-based Security
Module (USM) MIB
RFC 3415 – View-based Access Control
Model for SNMP
RFC 3584 – SNMP Community MIB
RFC 3621 – Power over Ethernet MIB
Management
Alias Port Naming Command Line
Interface (CLI)
Configuration Upload/Download
Dual IPv4/IPv6 Management Support
Editable Text-based Configuration File
TFTP Client
Multi-configuration File Support
NMS Automated Security Manager
NMS Console
NMS Inventory Manager
NMS Policy Manager
Node/Alias Table
RFC 768 – UDP
RFC 783 – TFTP
RFC 791 – IP
RFC 792 – ICMP
RFC 793 – TCP
RFC 826 – ARP
RFC 854 – Telnet
RFC 951 – BootP
RFC 1157 – SNMP
RFC 1901 – Community-based SNMPv2
RFC 1981 – Path MTU for IPv6
RFC 2465 – IPv6 MIB
RFC 2933 – IGMP MIB
RFC 3176 – sFlow
RFC 3413 – SNMP Applications MIB
RFC 3414 – SNMP User-based Security
Module (USM) MIB
RFC 3415 – View-based Access Control
Model for SNMP
RFC 3826 – Advanced Encryption Standard
(AES) for SNMP
RMON (Stats, History, Alarms, Events,
Filters, Packet Capture)
Secure Copy (SCP)
Secure FTP (SFTP)
Simple Network Management Protocol
(SNMP) v1/v2c/v3
Simple Network Time Protocol (SNTP)
SSHv2
RFC 3164 – The BSD Syslog Protocol
TACACS+ for Management Authentication,
Authorization and Auditing
Web-based Management
Webview via SSL Interface
Page 3
Switch Model Specifications
B5G124-24
B5G124-24P2
B5G124-48
B5G124-48P2
Throughput Capacity wirespeed Mpps
(switch / stack)
35.7 Mpps / 285.7 Mpps
35.7 Mpps / 285.7 Mpps
71.4 Mpps / 571.4 Mpps
71.4 Mpps / 571.4 Mpps
Switching Capacity
(switch / stack)
48 Gbps (35.7 Mpps)/
384 Gbps (285.7 Mpps)
48 Gbps (35.7 Mpps)/
384 Gbps (285.7 Mpps)
96 Gbps (71.4 Mpps)/
768 Gbps (571.4 Mpps)
96 Gbps (71.4 Mpps)/
768 Gbps (571.4 Mpps)
Stacking Capacity
(switch / stack)
48 Gbps (35.7 Mpps)/
384 Gbps (285.7 Mpps)
48 Gbps (35.7 Mpps)/
384 Gbps (285.7 Mpps)
48 Gbps (35.7 Mpps)/
384 Gbps (285.7 Mpps)
48 Gbps (35.7 Mpps)/
384 Gbps (285.7 Mpps)
Aggregate Throughput
Capacity
(switch / stack)
96 Gbps (71.4 Mpps)/
768 Gbps (571.4 Mpps)
96 Gbps (71.4 Mpps)/
768 Gbps (571.4 Mpps)
144 Gbps (107.1 Mpps)/
1,152 Gbps (857.1 Mpps)
144 Gbps (107.1 Mpps)/
1,152 Gbps (857.1 Mpps)
802.3af Interoperable
N/A
Yes
N/A
Yes
802.3at Interoperable
N/A
Yes
N/A
Yes
System Power
N/A
375 watts per switch with up
to 30 watts per port
Per-port switch power monitor:
• Enable/disable
• Priority safety
• Overload & short circuit
protection
N/A
375 watts per switch with up
to 30 watts per port
Per-port switch power monitor:
• Enable/disable
• Priority safety
• Overload & short circuit
protection
Dimensions (H x W x D)
H: 4.4 cm (1.73”)
W: 44.1 cm (17.36”)
D: 36.85 cm (14.51”)
H: 4.4 cm (1.73”)
W: 44.1 cm (17.36”)
D: 36.85 cm (14.51”)
H: 4.4 cm (1.73”)
W: 44.1 cm (17.36”)
D: 36.85 cm (14.51”)
H: 4.4 cm (1.73”)
W: 44.1 cm (17.36”)
D: 36.85 cm (14.51”)
Net Weight
4.92 kg (10.85 lb)
6.10 kg (13.45 lb)
5.31 kg (11.70 lb)
6.49 kg (14.30 lb)
MTBF
394,679 hours
345,093 hours
308,359 hours
260,806 hours
Physical Ports
• (24) 10/100/1000 autosensing, auto-negotiating
MDI/MDI-X RJ45 ports
• (4) Combo SFP ports
• (2) dedicated stacking ports
• (1) DB9 console port
• (1) RPS connector
• (24) 10/100/1000 PoE
(.af + .at) auto-sensing,
auto-negotiating MDI/MDI-X
RJ45 ports
• (4) Combo SFP ports
• (2) dedicated stacking ports
• (1) DB9 console port
• (1) RPS connector
• (48) 10/100/1000 autosensing, auto-negotiating
MDI/MDI-X RJ45 ports
• (4) Combo SFP ports
• (2) dedicated stacking ports
• (1) DB9 console port
• (1) RPS connector
• (48) 10/100/1000 PoE
(.af + .at) auto-sensing,
auto-negotiating
MDI/MDI-X RJ45 ports
• (4) Combo SFP ports
• (2) dedicated stacking ports
• (1) DB9 console port
• (1) RPS connector
Normal Input Voltage
100 - 240 VAC
100 - 240 VAC
100 - 240 VAC
100 - 240 VAC
Input Frequency
50 – 60 Hz
50 – 60 Hz
50 – 60 Hz
50 – 60 Hz
Input Current
2 A Max
7.5 A Max
2 A Max
7.5 A Max
Power Consumption
48 watts
130 watts
76 watts
225 watts
IEC 6-2-1
Standard Operating
Temperature
0° to 50° C
(32° to 122° F)
0° to 50° C
(32° to 122° F)
0° to 50° C
(32° to 122° F)
0° to 50° C
(32° to 122° F)
IEC 6-2-14
Non-Operating Temperature
-40° to 70° C
(-40° to 158° F)
-40° to 70° C
(-40° to 158° F)
-40° to 70° C
(-40° to 158° F)
-40° to 70° C
(-40° to 158° F)
Heat Dissipation
164 BTUs/Hr
444 BTUs/Hr
258 BTUs/Hr
768 BTUs/Hr
5% - 95% non-condensing
5% - 95% non-condensing
5% - 95% non-condensing
5% - 95% non-condensing
IEC 68-2-6, IEC68-2-36
IEC 68-2-6, IEC68-2-36
IEC 68-2-6, IEC68-2-36
IEC 68-2-6, IEC68-2-36
IEC 68-2-29
IEC 68-2-29
IEC 68-2-29
IEC 68-2-29
IEC 68-2-32
IEC 68-2-32
IEC 68-2-32
IEC 68-2-32
Operating
10,000 ft (3,048 m)
10,000 ft (3,048 m)
10,000 ft (3,048 m)
10,000 ft (3,048 m)
Non-operating
15,000 ft (4,572 m)
15,000 ft (4,572 m)
15,000 ft (4,572 m)
15,000 ft (4,572 m)
Performance
PoE Specifications
Physical Specifications
Power Requirements
Temperature
Humidity
Operating Humidity
Vibration
Shock
Drop
Altitude
Page 4
Acoustics
Front of switch
(normal operation)
44.5 dB
45 dB
45.5 dB
44.5 dB
Agency and Regulatory Standard Specifications
Safety
UL 60950-1, CSA 22.1
60950, EN 60950-1, and
IEC 60950-1
UL 60950-1, CSA 22.1
60950, EN 60950-1, and
IEC 60950-1
UL 60950-1, CSA 22.1
60950, EN 60950-1, and
IEC 60950-1
UL 60950-1, CSA 22.1
60950, EN 60950-1, and
IEC 60950-1
EMC
FCC Part 15 (Class A), ICES003 (Class A), BSMI, VCCI
V-3, AS/NZS CISPR 22 (Class
A), EN 55022 (Class A), EN
55024, EN 61000-3-2, and
EN 61000-3-3
FCC Part 15 (Class A), ICES003 (Class A), BSMI, VCCI
V-3, AS/NZS CISPR 22 (Class
A), EN 55022 (Class A), EN
55024, EN 61000-3-2, and
EN 61000-3-3
FCC Part 15 (Class A), ICES003 (Class A), BSMI, VCCI
V-3, AS/NZS CISPR 22 (Class
A), EN 55022 (Class A), EN
55024, EN 61000-3-2, and
EN 61000-3-3
FCC Part 15 (Class A), ICES003 (Class A), BSMI, VCCI
V-3, AS/NZS CISPR 22 (Class
A), EN 55022 (Class A), EN
55024, EN 61000-3-2, and
EN 61000-3-3
Environmental
2002/95/EC (RoHS Directive),
2002/96/EC (WEEE Directive),
Ministry of Information Order
#39 (China RoHS)
2002/95/EC (RoHS Directive),
2002/96/EC (WEEE Directive),
Ministry of Information Order
#39 (China RoHS)
2002/95/EC (RoHS Directive),
2002/96/EC (WEEE Directive),
Ministry of Information Order
#39 (China RoHS)
2002/95/EC (RoHS Directive),
2002/96/EC (WEEE Directive),
Ministry of Information Order
#39 (China RoHS)
B5K125-24
B5K125-24P2
B5K125-48
B5K125-48P2
Throughput Capacity wirespeed Mpps
(switch / stack)
65.5 Mpps / 523.8 Mpps
65.5 Mpps / 523.8 Mpps
101.2 Mpps / 809.5 Mpps
101.2 Mpps / 809.5 Mpps
Switching Capacity
(switch / stack)
88 Gbps (65.5 Mpps)/
704 Gbps (523.8 Mpps)
88 Gbps (65.5 Mpps)/
704 Gbps (523.8 Mpps)
136 Gbps (101.2 Mpps)/
1,088 Gbps (809.5 Mpps)
136 Gbps (101.2 Mpps)/
1,088 Gbps (809.5 Mpps)
Stacking Capacity
(switch / stack)
48 Gbps (35.7 Mpps)/
384 Gbps (285.7 Mpps)
48 Gbps (35.7 Mpps)/
384 Gbps (285.7 Mpps)
48 Gbps (35.7 Mpps)/
384 Gbps (285.7 Mpps)
48 Gbps (35.7 Mpps)/
384 Gbps (285.7 Mpps)
Aggregate Throughput
Capacity
(switch / stack)
136 Gbps (101.2 Mpps)/
1,088 Gbps (809.5 Mpps)
136 Gbps (101.2 Mpps)/
1,088 Gbps (809.5 Mpps)
184 Gbps (136.9 Mpps)/
1,472 Gbps (1,095.2 Mpps)
184 Gbps (136.9 Mpps)/
1,472 Gbps (1,095.2 Mpps)
802.3af Interoperable
N/A
Yes
N/A
Yes
802.3at Interoperable
N/A
Yes
N/A
Yes
System Power
N/A
375 watts per switch with up
to 30 watts per port
Per-port switch power monitor:
• Enable/disable
• Priority safety
• Overload & short circuit
protection
N/A
375 watts per switch with up
to 30 watts per port
Per-port switch power monitor:
• Enable/disable
• Priority safety
• Overload & short circuit
protection
Dimensions (H x W x D)
H: 4.4 cm (1.73”)
W: 44.1 cm (17.36”)
D: 36.85 cm (14.51”)
H: 4.4 cm (1.73”)
W: 44.1 cm (17.36”)
D: 36.85 cm (14.51”)
H: 4.4 cm (1.73”)
W: 44.1 cm (17.36”)
D: 36.85 cm (14.51”)
H: 4.4 cm (1.73”)
W: 44.1 cm (17.36”)
D: 36.85 cm (14.51”)
Net Weight
4.92 kg (10.85 lb)
6.10 kg (13.45 lb)
5.31 kg (11.70 lb)
6.49 kg (14.30 lb)
MTBF
374,029 hours
328,905 hours
297,808 hours
252,940 hours
Physical Ports
• (24) 10/100/1000 autosensing, auto-negotiating
MDI/MDI-X RJ45 ports
• (2) Combo SFP ports
• (2) 10GE ports
• (2) dedicated stacking ports
• (1) DB9 console port
• (1) RPS connector
• (24)10/100/1000 PoE
(.af + .at) auto-sensing,
auto-negotiating MDI/MDI-X
RJ45 ports
• (2) Combo SFP ports
• (2) 10GE ports
• (2) dedicated stacking ports
• (1) DB9 console port
• (1) RPS connector
• (48) 10/100/1000 autosensing, auto-negotiating
MDI/MDI-X RJ45 ports
• (2) Combo SFP ports
• (2) 10GE ports
• (2) dedicated stacking ports
• (1) DB9 console port
• (1) RPS connector
• (48)10/100/1000 PoE
(.af + .at) auto-sensing,
auto-negotiating MDI/MDI-X
RJ45 ports
• (2) Combo SFP ports
• (2) 10GE ports
• (2) dedicated stacking ports
• (1) DB9 console port
• (1) RPS connector
Normal Input Voltage
100 - 240 VAC
100 - 240 VAC
100 - 240 VAC
100 - 240 VAC
Input Frequency
50 – 60 Hz
50 – 60 Hz
50 – 60 Hz
50 – 60 Hz
Input Current
2 A Max
7.5 A Max
2 A Max
7.5 A Max
Power Consumption
59 watts
136 watts
94 watts
228 watts
IEC 6-2-1
Standard Operating
Temperature
0° to 50° C
(32° to 122° F)
0° to 50° C
(32° to 122° F)
0° to 50° C
(32° to 122° F)
0° to 50° C
(32° to 122° F)
IEC 6-2-14
Non-Operating Temperature
-40° to 70° C
(-40° to 158° F)
-40° to 70° C
(-40° to 158° F)
-40° to 70° C
(-40° to 158° F)
-40° to 70° C
(-40° to 158° F)
Performance
PoE Specifications
Physical Specifications
Power Requirements
Temperature
Page 5
B5K125-24
B5K125-24P2
B5K125-48
B5K125-48P2
200 BTUs/Hr
463 BTUs/Hr
321 BTUs/Hr
777 BTUs/Hr
5% - 95% non-condensing
5% - 95% non-condensing
5% - 95% non-condensing
5% - 95% non-condensing
IEC 68-2-6, IEC68-2-36
IEC 68-2-6, IEC68-2-36
IEC 68-2-6, IEC68-2-36
IEC 68-2-6, IEC68-2-36
IEC 68-2-29
IEC 68-2-29
IEC 68-2-29
IEC 68-2-29
IEC 68-2-32
IEC 68-2-32
IEC 68-2-32
IEC 68-2-32
45.5 dB
45 dB
46 dB
45.5 dB
Operating
10,000 ft (3,048 m)
10,000 ft (3,048 m)
10,000 ft (3,048 m)
10,000 ft (3,048 m)
Non-operating
15,000 ft (4,572 m)
15,000 ft (4,572 m)
15,000 ft (4,572 m)
15,000 ft (4,572 m)
Heat Dissipation
Humidity
Operating Humidity
Vibration
Shock
Drop
Acoustics
Front of switch
(normal operation)
Altitude
Agency and Regulatory Standard Specifications
Safety
UL 60950-1, CSA 22.1
60950, EN 60950-1, and
IEC 60950-1
UL 60950-1, CSA 22.1
60950, EN 60950-1, and
IEC 60950-1
UL 60950-1, CSA 22.1
60950, EN 60950-1, and
IEC 60950-1
UL 60950-1, CSA 22.1
60950, EN 60950-1, and
IEC 60950-1
EMC
FCC Part 15 (Class A), ICES003 (Class A), BSMI, VCCI
V-3, AS/NZS CISPR 22 (Class
A), EN 55022 (Class A), EN
55024, EN 61000-3-2, and
EN 61000-3-3
FCC Part 15 (Class A), ICES003 (Class A), BSMI, VCCI
V-3, AS/NZS CISPR 22 (Class
A), EN 55022 (Class A), EN
55024, EN 61000-3-2, and
EN 61000-3-3
FCC Part 15 (Class A), ICES003 (Class A), BSMI, VCCI
V-3, AS/NZS CISPR 22 (Class
A), EN 55022 (Class A), EN
55024, EN 61000-3-2, and
EN 61000-3-3
FCC Part 15 (Class A), ICES003 (Class A), BSMI, VCCI
V-3, AS/NZS CISPR 22 (Class
A), EN 55022 (Class A), EN
55024, EN 61000-3-2, and
EN 61000-3-3
Environmental
2002/95/EC (RoHS Directive),
2002/96/EC (WEEE Directive),
Ministry of Information Order
#39 (China RoHS)
2002/95/EC (RoHS Directive),
2002/96/EC (WEEE Directive),
Ministry of Information Order
#39 (China RoHS)
2002/95/EC (RoHS Directive),
2002/96/EC (WEEE Directive),
Ministry of Information Order
#39 (China RoHS)
2002/95/EC (RoHS Directive),
2002/96/EC (WEEE Directive),
Ministry of Information Order
#39 (China RoHS)
Redundant Power Supply Equipment Specifications
STK-RPS-150CH2 Power Shelf
STK-RPS-150PS Power Supply
STK-RPS-500PS Power Supply
Power Supply Slots
2
Dimensions (H x W x D)
19.6 cm (7.7”) x 5.2 cm (2.04”) x
25.7 cm (10.1”)
Dimensions (H x W x D)*
4.45 cm (1.75”) x 44.5 cm (17.5”) x
16.5 cm (6.5”)
Net Weight (Unit Only)
1.75 kg (3.85 lbs)
Net Weight (Unit Only)
3.47 kg (7.63 lbs)
Weight
0.95 kg (2.09 lbs)
Gross Weight (Packaged Unit)
3.20 kg (7.04 lbs)
Gross Weight (Packaged Unit)
4.95 kg (10.89 lbs)
*Note: dimensions include integrated rack
mount ears
MTBF
300,000 hours
MTBF
589,644 hours at 25° C (77° F)
STK-RPS-150CH8 Power Shelf
Operating Temperature
0° C to 50° C (32° F to 122° F)
Operating Temperature
0° C to 50° C (32° F to 122° F)
Storage Temperature
-30° C to 73° C (-22° F to 164° F)
Storage Temperature
-30° C to 73° C (-22° F to 164° F)
Operating Relative Humidity
5% to 95%
Operating Relative Humidity
5% to 95%
AC Input Frequency Range
50 – 60 Hz
AC Input Frequency Range
50 – 60 Hz
AC Input Voltage Range
100 – 240 VAC
AC Input Voltage Range
100 – 240 VAC
Maximum Output Power
156 W continuous
Maximum Output Power
500 W continuous
Dimensions (H x W x D)*
5.5 cm (2.2”) x 44.0 cm (17.3”) x
18.0 cm (7.0”)
Power Supply Slots
8
Dimensions (H x W x D)*
22.26 cm (8.77”) x 44.0 cm (17.3”) x
26.4 cm (10.4”)
Weight
5.27 kg (11.6 lbs)
Page 6
Ordering Information
Part Number
Description
B5 Switches
B5G124-24
(24) 10/100/1000 RJ45 ports, (4) combo SFP ports, (2) dedicated high-speed stacking ports and external RPS
connector. Total active ports per switch: (24) Gigabit ports
B5G124-24P2
(24) 10/100/1000 PoE (.at + .af) RJ45 ports, (4) combo SFP ports, (2) dedicated high-speed stacking ports and
external RPS connector. Total active ports per switch: (24) Gigabit ports
B5G124-48
(48) 10/100/1000 RJ45 ports, (4) combo SFP ports, (2) dedicated high-speed stacking ports and external RPS
connector. Total active ports per switch: (48) Gigabit ports
B5G124-48P2
(48) 10/100/1000 PoE (.at + .af) RJ45 ports, (4) combo SFP ports, (2) dedicated high-speed stacking ports and
external RPS connector. Total active ports per switch: (48) Gigabit ports
B5K125-24
(24) 10/100/1000 RJ45 ports, (2) combo SFP ports, (2) 10GE ports, (2) dedicated high-speed stacking ports and
external RPS connector. Total active ports per switch: (24) Gigabit ports + (2) 10GE ports
B5K125-24P2
(24) 10/100/1000 PoE (.at + .af) RJ45 ports, (2) combo SFP ports, (2) 10GE ports, (2) dedicated high-speed
stacking ports and external RPS connector. Total active ports per switch: (24) Gigabit ports + (2) 10GE ports
B5K125-48
(48) 10/100/1000 RJ45 ports, (2) combo SFP ports, (2) 10GE ports, (2) dedicated high-speed stacking ports and
external RPS connector. Total active ports per switch: (48) Gigabit ports + (2) 10GE ports
B5K125-48P2
(48) 10/100/1000 PoE (.at + .af) RJ45 ports, (2) combo SFP ports, (2) 10GE ports, (2) dedicated high-speed
stacking ports and external RPS connector. Total active ports per switch: (48) Gigabit ports + (2) 10GE ports
Cables
STK-CAB-SHORT
Stacking cable for connecting adjacent B5/C5 switches (30cm)
STK-CAB-LONG
Stacking cable for connecting top switch to bottom switch in a B5 or C5 stack (1m)
STK-CAB-2M
Stacking cable for B5/C5 models (2m)
STK-CAB-5M
Stacking cable for B5/C5 models (5m)
SSCON-CAB
Spare DB9 Console Cable
Redundant Power Supplies
STK-RPS-150CH2
2-slot modular power supply shelf (power supply STK-RPS-150PS sold separately)
STK-RPS-150CH8
8-slot modular power supply shelf (power supply STK-RPS-150PS sold separately)
STK-RPS-150PS
150W Non-PoE redundant power supply
STK-RPS-500PS
500W 802.3at PoE redundant power supply
Page 7
Transceivers
Service and Support
Enterasys transceivers provide connectivity options for Ethernet over
twisted pair copper and fiber optic cables with transmission speeds from
100 Megabits per second to 10 Gigabits per second. The Enterasys B5
10GE ports support SFP+ transceivers that operate at 10GE, but do not
support 1GE transceivers. All Enterasys transceivers meet the highest
quality for extended life cycle and the best possible return on investment.
For detailed specifications, compatibility and ordering information please
go to http://www.enterasys.com/products/transceivers-ds.pdf.
Enterasys Networks provides comprehensive service offerings that range
from Professional Services to design, deploy and optimize customer
networks, customized technical training, to service and support tailored
to individual customer needs. Please contact your Enterasys account
executive for more information about Enterasys Service and Support.
Warranty
As a customer-centric company, Enterasys is committed to providing
quality products and solutions. In the event that one of our products
fails due to a defect, we have developed a comprehensive warranty that
protects you and provides a simple way to get your products repaired or
media replaced as soon as possible.
B-Series switches come with the Enterasys lifetime warranty against
manufacturing defects. For full warranty terms and conditions please
go to: www.enterasys.com/support/warranty.aspx.
Contact Us
For more information, call Enterasys Networks toll free at 1-877-801-7082,
or +1-978-684-1000 and visit us on the Web at enterasys.com
Patented Innovation
© 2010 Enterasys Networks, Inc. All rights reserved. Enterasys Networks reserves the right to change
specifications without notice. Please contact your representative to confirm current specifications.
Please visit http://www.enterasys.com/company/trademarks.aspx for trademark information.
11/10
Delivering on our promises. On-time. On-budget.