Hewlett Packard Enterprise A A3000-24G-PoE+

HP A3000G Wireless Switch Series
Data sheet
Product overview
Key features
The HP A3000G Wireless Switch Series are wired
and wireless unified switches that integrate both the
wireless controller and the 1000 Mbps Ethernet
switch functions. The A3000G series switches
provide 1000 Mbps Ethernet ports, each supporting
a maximum power of 25 W, PoE+ (draft), and IEEE
802.11a/b/g/n APs, while delivering unified wired
and wireless access control functions. The
A3000-24G-PoE+ wireless switch provides two
10-GbE slots on the rear panel. This relieves the
transmission bottleneck at the core of a WLAN
network. The A3000G series switches are suitable
for small and medium-sized enterprise networks, as
well as braches of large enterprise networks that
require both wired and wireless access services.
b
Unified wired and wireless functions
b
PoE+ capability
b
Built-in 802.1X and portal authentication servers
b
Flexible forwarding modes
b
Latest high-speed wireless standards
Features and benefits
Quality of Service (QoS)
• IEEE 802.1p prioritization: delivers data to
devices based on the priority and type of traffic
• Class of Service (CoS): sets the IEEE 802.1p
priority tag based on IP address, IP Type of
Service (ToS), Layer 3 protocol, TCP/UDP port
number, source port, and DiffServ
Management
Connectivity
• IEEE 802.3at draft Power over Ethernet
(PoE+) support: simplifies deployment and
dramatically reduces installation costs by helping
to eliminate the time and cost involved in
supplying local power at each access point
location
• IEEE 802.11h International
Telecommunication Union (ITU) compliant:
employs Dynamic Frequency Selection (DFS) to
automatically select another channel and adjust
transmit power to reduce interference with systems
such as radar, if detected on that same channel
• Automatic radio power adjustment:
• Loopback: supports internal loopback testing for
automatic AP power adjustment features analyze
maintenance purposes and an increase in
user access status in real time, adapting power
availability; loopback detection protects against
requirements based on environmental changes and
incorrect cabling or network configurations and
providing high-quality user access signal coverage
can be enabled on a per-port or per-VLAN basis
• Automatic radio channel adjustment:
for added flexibility
intelligent channel switching and real-time
• Optional 10 Gigabit Ethernet ports for
interference detection provide the allocation of a
A3000-24G-PoE+ wireless switch: add 10
high-quality channel to each AP, reducing
Gigabit Ethernet connections for uplinks or
adjacent channel interference
high-bandwidth server connections through
• Load balancing: intelligent load-sharing
A3000-24G-PoE+ extended slots; flexibly supports
analyzes the locations of wireless clients in real
XENPAK or XFP-style 10 Gigabit transceivers
time, providing high-quality client throughput
regardless of location or number of online sessions
• Rogue AP detection: regular scans for rogue
APs help confirm that the network is secure
• Enterprise network management: is
supported by the Web-based, enterprise-class HP
Intelligent Management Center (IMC) network
management platform and Wireless Service
Management (WSM), which effectively integrate
traditionally disparate management tools into one
easy-to-use interface
• Secure controller management: securely
manages the controller from a single location with
IMC or any other SNMP management station;
controller supports SNMPv3 as well as SSH and
SSL for secure CLI and Web management
• Network Time Protocol (NTP): synchronizes
timekeeping among distributed time servers and
clients; keeps consistent timekeeping among all
clock-dependent devices within the network so that
the devices can provide diverse applications
based on the consistent time
• AAA server: uses embedded AAA server or
external AAA server for local users
Performance
• Built-in 802.1X and portal authentication
servers: the A3000G series provides a built-in
IEEE 802.1X authentication server that supports
multiple IEEE 802.1X authentication modes, such
as TLS, PEAP, and MD5; the A3000G series also
provides a built-in portal server that can
authenticate users having no security
authentication client installed; both features are
economical and easy-to-use solutions for small to
medium-sized enterprise networks
• Flexible forwarding modes: the A3000G
series supports both distributed forwarding mode
and centralized forwarding mode, allowing you to
set SSID-based forwarding types as needed; in a
wireless network of centralized forwarding mode,
all wireless traffic is sent to an AC for processing;
if there is a wireless network in which APs are
deployed at branches, ACs are deployed at the
headquarters, and APs and ACs are connected
over a WAN, the distributed mode will be
necessary
• Fast roaming: supports Layer 3 roaming and
fast roaming, satisfying the most demanding voice
service requirements
2
• High performance: robust switching capacity
and wire-speed processing provide powerful
forwarding capacity for medium and large
enterprise-size wireless LANs (WLANs)
Manageability
• Web interface: allows configuration of the
switch from any Web browser on the network
Layer 2 switching
• VLAN support and tagging: support IEEE
802.1Q, with 4094 simultaneous VLAN IDs
• GARP VLAN Registration Protocol (GVRP):
allows automatic learning and dynamic
assignment of VLANs
• Spanning Tree: fully supports standard IEEE
802.1D Spanning Tree Protocol, IEEE 802.1w
Rapid Spanning Tree Protocol for faster
convergence, and IEEE 802.1s Multiple Spanning
Tree Protocol
• Port mirroring: duplicates port traffic (ingress
and egress) to a local or remote monitoring port
• Jumbo packet support: supports up to 4 KB
frame size to improve performance of large data
transfers
• Secure Shell (SSHv2): uses external servers to
securely log in to a remote device; with
authentication and encryption, it protects against
IP spoofing and plain text password interception;
increases the security of SFTP transfers
• MAC authentication: provides simple
authentication based on a user's MAC address;
supports local or RADIUS-based authentication
• Secure user isolation: virtual AP services
enable the network administrator to provide
specific services for different user groups,
improving bandwidth and system resources and
simplifying network maintenance and management
• Secure access by location: location AP-based
user access control helps ensure that wireless users
can access and authenticate only to preselected
APs, enabling system administrators to control the
locations where a wireless user can access the
network
• Secure access control by user: media access
control (MAC)-based and IEEE 802.1X network
access control centralize wireless security through
existing Remote Authentication Dial-In User Service
(RADIUS) servers to protect the network from
unauthorized user access
• Endpoint Admission Defense (EAD):
integrated wired and wireless EAD helps ensure
that only wireless clients who comply with
• Layer 3 IP routing (A3000G wired
mandated enterprise security policies access the
features): static IP routing provides basic routing;
network, reducing threat levels by infected wireless
RIP provides RIPv1 and RIPv2 routing functions
clients and improving the overall security of the
wireless network
Standards
Layer 3 routing
• Latest high-speed wireless standards:
when used with IEEE 802.11n-based APs,
provides wireless access six times that of
traditional IEEE 802.11a/b/g networks, resulting
in expanded coverage and more efficient support
for wireless multimedia applications
Security
• IEEE 802.1X and RADIUS network logins:
control port-based access for authentication and
accountability
• Web-based authentication: similar to IEEE
802.1X, it provides a browser-based environment
to authenticate clients that do not support the IEEE
802.1X supplicant
• Choice of IEEE 802.11i, Wi-Fi Protected
Access 2 (WPA2), or WPA: locks out
unauthorized wireless access by authenticating
users prior to granting network access; robust
Advanced Encryption Standard (AES) or Temporal
Key Integrity Protocol (TKIP) encryption secures the
data integrity of the wireless traffic
• Guest VLAN: similar to IEEE 802.1X, it provides
a browser-based environment to authenticated
clients via iMC component
• HTTPS management: provides secure Web
management
• Public Key Infrastructure (PKI): is used to
control access
Scalability
• Pay as you grow: license upgrades allow you
to increase support for additional access points
without the need to buy additional costly hardware
and use additional valuable space in a chassis
Warranty and support
• 1-year warranty: with advance replacement
and 30-calendar-day delivery (available in most
countries)
3
• Electronic and telephone support: limited
electronic and telephone support is available from
HP; refer to www.hp.com/networking/warranty
for details on the support provided and the period
during which support is available
• Software releases: refer to
www.hp.com/networking/warranty for details on
the software releases provided and the period
during which software releases are available for
your product(s)
4
HP A3000G Wireless Switch Series
Specifications
Ports
HP A3000-24G-PoE+ Wireless Switch (JD449A)
HP A3000-10G-PoE+ Wireless Switch (JD450A)
HP A3000-8G-PoE+ Wireless Switch (JD444A)
24 RJ-45 auto-negotiating 10/100/1000 ports
(IEEE 802.3 Type 10Base-T, IEEE 802.3u Type
100Base-TX, IEEE 802.3ab Type 1000Base-T);
Media Type: Auto-MDIX; Duplex:
10Base-T/100Base-TX: half or full; 1000Base-T:
full only
8 RJ-45 dual-personality 10/100/1000 ports
(IEEE 802.3 Type 10Base-T, IEEE 802.3u Type
100Base-TX, IEEE 802.3ab Type 1000Base-T);
Media Type: Auto-MDIX; Duplex:
10Base-T/100Base-TX: half or full; 1000Base-T:
full only
8 RJ-45 auto-negotiating 10/100/1000 ports
(IEEE 802.3 Type 10Base-T, IEEE 802.3u Type
100Base-TX, IEEE 802.3ab Type 1000Base-T);
Media Type: Auto-MDIX; Duplex:
10Base-T/100Base-TX: half or full; 1000Base-T:
full only
4 SFP dual-personality ports; Duplex: full only; (4
10/100/1000Base-T and 1000Base-X Gigabit
Ethernet combination)
2 SFP 1000 Mbps ports
1 RJ-45 serial console port
1 RJ-45 serial console port
2 extended module slots
1 RJ-45 serial console port
Physical characteristics
Dimensions
16.89(d) x 17.32(w) x 1.72(h) in. (42.9 x 44 x
4.36 cm) (1U height)
10.59(d) x 11.81(w) x 1.72(h) in. (26.9 x 30 x
4.36 cm) (1U height)
10.59(d) x 11.81(w) x 1.72(h) in. (26.9 x 30 x
4.36 cm) (1U height)
15.87 lb. (7.2 kg)
6.39 lb. (2.9 kg)
6.39 lb. (2.9 kg)
Dual core @ 750 MHz, 64 MB flash, 512 MB
DDR2 SDRAM
Dual core @ 750 MHz, 64 MB flash, 512 MB
DDR2 SDRAM
Dual core @ 750 MHz, 64 MB flash, 512 MB
DDR2 SDRAM
EIA standard 19-in. telco rack or equipment
cabinet (hardware included)
EIA standard 19-in. telco rack or equipment
cabinet (hardware included)
EIA standard 19-in. telco rack or equipment
cabinet (hardware included)
Performance
Switch fabric speed
1 Gbps
1 Gbps
1 Gbps
MAC address table size
2,000 entries
2,000 entries
2,000 entries
Environment
Operating temperature
32°F to 113°F (0°C to 45°C)
32°F to 113°F (0°C to 45°C)
32°F to 113°F (0°C to 45°C)
Operating relative humidity
5% to 95%, non-condensing
5% to 95%, non-condensing
5% to 95%, non-condensing
Non-operating/Storage temperature
-40°F to 158°F (-40°C to 70°C)
-40°F to 158°F (-40°C to 70°C)
-40°F to 158°F (-40°C to 70°C)
Non-operating/Storage relative humidity
5% to 95%, non-condensing
5% to 95%, non-condensing
5% to 95%, non-condensing
Electrical characteristics
Maximum heat dissipation
333 BTU/hr (351.32 kJ/hr)
165 BTU/hr (174.08 kJ/hr)
130 BTU/hr (137.15 kJ/hr)
Voltage
100-240 VAC
100-240 VAC
100-240 VAC
DC Voltage
-48 VDC to -60 VDC
Power Inputs
100 W (without external PoE device); AC: 470
W; DC (with external RPS): 700 W
50 W (without external PoE device); 180 W (with
PoE)
40 W (without external PoE device); 140 W (with
PoE)
Frequency
50 / 60 Hz
50 / 60 Hz
50 / 60 Hz
Notes
Supports PoE on 24 ports. The internal power
supply can offer up to 370 W, so the device
supports 24 ports for PoE at the same time.
Supports PoE+ on 24 ports, with each port
offering up to 25 W. Because the internal power
supply can offer up to 370 W, the device
supports 14 ports for PoE+ at the same time.
When an RPS external power supply is adopted,
the device supports 24 ports for PoE+ at the same
time.
Supports PoE power supply on 8 ports at the
same time (IEEE 802.3af). Supports PoE+ power
supply on 8 ports, with each port providing up to
25 W. Because the internal power supply can
offer up to 125 W, the device can support PoE+
power supply on 4 ports at the same time.
PoE power supply is available on the first 4 ports
on the front panel (IEEE 802.3af). Supports PoE+
power supply on the first 4 ports on the front
panel, with each port providing up to 25 W. The
internal power supply can offer up to 125 W in
total.
Safety
UL 60950-1; EN 60950-1; CAN/CSA-C22.2
No. 60950-1; Anatel; GOST; C-Tick; NOM; IEC
60950-1(with CB report)
UL 60950-1; EN 60950-1; CAN/CSA-C22.2
No. 60950-1; Anatel; GOST; C-Tick; NOM; IEC
60950-1(with CB report)
UL 60950-1; EN 60950-1; CAN/CSA-C22.2
No. 60950-1; Anatel; GOST; C-Tick; NOM; IEC
60950-1(with CB report)
Emissions
EN 55022; VCCI; ICES-003; AS/NZS CISPR 22;
EN 300 386; FCC Part 15; EN
61000-3-2:2006; EN 61000-3-3:1995
+A1:2001+A2:2005; EMC Directive
2004/108/EC
EN 55022; VCCI; ICES-003; AS/NZS CISPR 22;
EN 300 386; FCC Part 15; EN
61000-3-2:2006; EN 61000-3-3:1995
+A1:2001+A2:2005; EMC Directive
2004/108/EC
EN 55022; VCCI; ICES-003; AS/NZS CISPR 22;
EN 300 386; FCC Part 15; EN
61000-3-2:2006; EN 61000-3-3:1995
+A1:2001+A2:2005; EMC Directive
2004/108/EC
EN 61000-4-2:1995+A1:1998+A2:2001; EN
61000-4-3:2006; EN 61000-4-4:2004; EN
61000-4-5:2006; EN 61000-4-6: 1996
+A1:2001:A2:2007; EN 61000-4-8:2001; EN
61000-4-11:2004; EN 55024:1998+ A1:2001
+ A2:2003
EN 61000-4-2:1995+A1:1998+A2:2001; EN
61000-4-3:2006; EN 61000-4-4:2004; EN
61000-4-5:2006; EN 61000-4-6: 1996
+A1:2001:A2:2007; EN 61000-4-8:2001; EN
61000-4-11:2004; EN 55024:1998+ A1:2001
+ A2:2003
EN 61000-4-2:1995+A1:1998+A2:2001; EN
61000-4-3:2006; EN 61000-4-4:2004; EN
61000-4-5:2006; EN 61000-4-6: 1996
+A1:2001:A2:2007; EN 61000-4-8:2001; EN
61000-4-11:2004; EN 55024:1998+ A1:2001
+ A2:2003
Weight
Memory and processor
Processor
Mounting
Immunity
EN
5
HP A3000G Wireless Switch Series
Specifications (continued)
HP A3000-24G-PoE+ Wireless Switch (JD449A)
HP A3000-10G-PoE+ Wireless Switch (JD450A)
HP A3000-8G-PoE+ Wireless Switch (JD444A)
Management
IMC - Intelligent Management Center;
command-line interface; Web browser;
configuration menu; SNMP Manager; Telnet;
HTTPS; RMON1; FTP; in-line and out-of-band;
IEEE 802.3 Ethernet MIB; Ethernet Interface MIB
IMC - Intelligent Management Center;
command-line interface; Web browser;
configuration menu; SNMP Manager; Telnet;
HTTPS; RMON1; FTP; in-line and out-of-band;
IEEE 802.3 Ethernet MIB; Ethernet Interface MIB
IMC - Intelligent Management Center;
command-line interface; Web browser;
configuration menu; SNMP Manager; Telnet;
HTTPS; RMON1; FTP; in-line and out-of-band;
IEEE 802.3 Ethernet MIB; Ethernet Interface MIB
Features
A3000-24G-PoE+ wireless switch supports 24
APs by default. With a 12 AP license upgrade (up
to two 12 AP license upgrades are supported), it
can support up to 48 APs.
A3000-10G-PoE+ wireless switch supports 12
APs by default. With a 12 AP license upgrade (up
to one 12 AP license upgrade is supported), it
can support up to 24 APs.
A3000-8G-PoE+ wireless switch supports 8 APs
by default; no license is needed.
Notes
Maximum number of users: 1000; maximum
number of users supported by local
authentication: 1000; maximum number of SSIDs
that can be configured: 64; maximum number of
users supported by local portal authentication:
1000; number of ACLs: 2.
Maximum number of users: 1000; maximum
number of users supported by local
authentication: 1000; maximum number of SSIDs
that can be configured: 64; maximum number of
users supported by local portal authentication:
1000; number of ACLs: 2.
Maximum number of users: 1000; maximum
number of users supported by local
authentication: 1000; maximum number of SSIDs
that can be configured: 64; maximum number of
users supported by local portal authentication:
1000; number of ACLs: 2.
Services
3-year, parts only, global next-day advance
exchange (UW884E)
3-year, 4-hour onsite, 13x5 coverage for hardware
(UW885E)
3-year, 4-hour onsite, 24x7 coverage for hardware
(UW888E)
3-year, 4-hour onsite, 24x7 coverage for hardware,
24x7 software phone support (UW891E)
3-year, 24x7 SW phone support, software updates
(UW894E)
4-year, 4-hour onsite, 13x5 coverage for hardware
(UW886E)
4-year, 4-hour onsite, 24x7 coverage for hardware
(UW889E)
4-year, 4-hour onsite, 24x7 coverage for hardware,
24x7 software phone (UW892E)
4-year, 24x7 SW phone support, software updates
(UW895E)
5-year, 4-hour onsite, 13x5 coverage for hardware
(UW887E)
5-year, 4-hour onsite, 24x7 coverage for hardware
(UW890E)
5-year, 4-hour onsite, 24x7 coverage for hardware,
24x7 software phone (UW893E)
5-year, 24x7 SW phone support, software updates
(UW896E)
3 Yr 6 hr Call-to-Repair Onsite (UW897E)
4 Yr 6 hr Call-to-Repair Onsite (UW898E)
5 Yr 6 hr Call-to-Repair Onsite (UW899E)
3-year, parts only, global next-day advance
exchange (UW884E)
3-year, 4-hour onsite, 13x5 coverage for hardware
(UW885E)
3-year, 4-hour onsite, 24x7 coverage for hardware
(UW888E)
3-year, 4-hour onsite, 24x7 coverage for hardware,
24x7 software phone support (UW891E)
3-year, 24x7 SW phone support, software updates
(UW894E)
4-year, 4-hour onsite, 13x5 coverage for hardware
(UW886E)
4-year, 4-hour onsite, 24x7 coverage for hardware
(UW889E)
4-year, 4-hour onsite, 24x7 coverage for hardware,
24x7 software phone (UW892E)
4-year, 24x7 SW phone support, software updates
(UW895E)
5-year, 4-hour onsite, 13x5 coverage for hardware
(UW887E)
5-year, 4-hour onsite, 24x7 coverage for hardware
(UW890E)
5-year, 4-hour onsite, 24x7 coverage for hardware,
24x7 software phone (UW893E)
5-year, 24x7 SW phone support, software updates
(UW896E)
3 Yr 6 hr Call-to-Repair Onsite (UW897E)
4 Yr 6 hr Call-to-Repair Onsite (UW898E)
5 Yr 6 hr Call-to-Repair Onsite (UW899E)
3-year, parts only, global next-day advance
exchange (UW884E)
3-year, 4-hour onsite, 13x5 coverage for hardware
(UW885E)
3-year, 4-hour onsite, 24x7 coverage for hardware
(UW888E)
3-year, 4-hour onsite, 24x7 coverage for hardware,
24x7 software phone support (UW891E)
3-year, 24x7 SW phone support, software updates
(UW894E)
4-year, 4-hour onsite, 13x5 coverage for hardware
(UW886E)
4-year, 4-hour onsite, 24x7 coverage for hardware
(UW889E)
4-year, 4-hour onsite, 24x7 coverage for hardware,
24x7 software phone (UW892E)
4-year, 24x7 SW phone support, software updates
(UW895E)
5-year, 4-hour onsite, 13x5 coverage for hardware
(UW887E)
5-year, 4-hour onsite, 24x7 coverage for hardware
(UW890E)
5-year, 4-hour onsite, 24x7 coverage for hardware,
24x7 software phone (UW893E)
5-year, 24x7 SW phone support, software updates
(UW896E)
3 Yr 6 hr Call-to-Repair Onsite (UW897E)
4 Yr 6 hr Call-to-Repair Onsite (UW898E)
5 Yr 6 hr Call-to-Repair Onsite (UW899E)
Refer to the HP website at
www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For
details about services and response times in your
area, please contact your local HP sales office.
Refer to the HP website at
www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For
details about services and response times in your
area, please contact your local HP sales office.
Refer to the HP website at
www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For
details about services and response times in your
area, please contact your local HP sales office.
6
HP A3000G Wireless Switch Series
Specifications (continued)
Standards and protocols
(applies to all products in series)
HP A3000-24G-PoE+ Wireless Switch (JD449A)
HP A3000-10G-PoE+ Wireless Switch (JD450A)
HP A3000-8G-PoE+ Wireless Switch (JD444A)
General protocols
RFC 768 UDP
RFC 791 IP
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 854 TELNET
RFC 855 Telnet Option Specification
RFC 858 Telnet Suppress Go Ahead Option
RFC 894 IP over Ethernet
RFC 950 Internet Standard Subnetting Procedure
RFC 959 File Transfer Protocol (FTP)
RFC 1122 Host Requirements
RFC 1141 Incremental updating of the Internet
checksum
RFC 1144 Compressing TCP/IP headers for
low-speed serial links
RFC 1256 ICMP Router Discovery Protocol (IRDP)
RFC 1321 The MD5 Message-Digest Algorithm
RFC 1334 PPP Authentication Protocols (PAP)
RFC 1350 TFTP Protocol (revision 2)
RFC 1812 IPv4 Routing
RFC 1944 Benchmarking Methodology for
Network Interconnect Devices
RFC 1994 PPP Challenge Handshake
Authentication Protocol (CHAP)
RFC 2104 HMAC: Keyed-Hashing for Message
Authentication
RFC 2246 The TLS Protocol Version 1.0
RFC 2284 EAP over LAN
RFC 2644 Directed Broadcast Control
RFC 2864 The Inverted Stack Table Extension to
the Interfaces Group MIB
RFC 2866 RADIUS Accounting
RFC 2869 RADIUS Extensions
RFC 3268 Advanced Encryption Standard (AES)
Ciphersuites for Transport Layer Security (TLS)
RFC 3619 Ethernet Automatic Protection
Switching (EAPS)
draft-ietf-capwap-protocol-specification-00.txt:CAP
WAP Protocol Specification
draft-ohara-capwap-lwapp-03.txt:Light Weight
Access Point Protocol
RFC 2932IP (Multicast Routing MIB)
RFC 2933 IGMP MIB
IP multicast
RFC 1112 IGMP
RFC 2236 IGMPv2
RFC 2934 Protocol Independent Multicast MIB for
IPv4
QoS/CoS
RFC 2474 DS Field in the IPv4 and IPv6 Headers
RFC 2475 DiffServ Architecture
RFC 3168 The Addition of Explicit Congestion
Notification (ECN) to IP
MIBs
RFC 1229
RFC 1643
RFC 1757
RFC 2011
RFC 2012
RFC 2013
RFC 2571
RFC 2572
RFC 2613
RFC 2863
Security
RFC 3394 Advanced Encryption Standard (AES)
Key Wrap Algorithm
RFC 3579 RADIUS Support For Extensible
Authentication Protocol (EAP)
WPA (Wi-Fi Protected Access)/WPA2
Interface MIB Extensions
Ethernet MIB
Remote Network Monitoring MIB
SNMPv2 MIB for IP
SNMPv2 MIB for TCP
SNMPv2 MIB for UDP
SNMP Framework MIB
SNMP-MPD MIB
SMON MIB
The Interfaces Group MIB
Network management
RFC 1155 Structure of Management Information
RFC 1905 SNMPv2 Protocol Operations
RFC 2573 SNMPv3 Applications
RFC 2574 SNMPv3 User-based Security Model
(USM)
RFC 2575 VACM for SNMP
SNMPv1/v2c
IKEv1
RFC 3748 - Extensible Authentication Protocol
(EAP)
7
HP A3000G Wireless Switch Series accessories
Transceivers
HP X120 1G SFP LC LH100 Transceiver (JD103A)
HP X125 1G SFP RJ45 T Transceiver (JD089B)
License
HP X120 1G SFP LC BX 10-U Transceiver (JD098B)
HP A-WX3000 12 Access Point License Upgrade
(JD462A)
HP X120 1G SFP LC BX 10-D Transceiver (JD099B)
HP X115 100M SFP LC BX 10-U Transceiver (JD100A)
HP X110 100M SFP LC FX Transceiver (JD102B)
HP A3000-24G-PoE+ Wireless Switch
(JD449A)
HP X125 1G SFP LC SX Transceiver (JD118B)
HP 1-Port 10-GbE XFP A3000 Module (JD339A)
HP X120 1G SFP LC LX Transceiver (JD119B)
HP X135 LC LR XFP Transceiver (JD088A)
HP X110 100M SFP LC LX Transceiver (JD120B)
HP X130 SC ZR XFP Transceiver (JD107A)
HP X124 1G SFP LC LH40 1310nm Transceiver (JD061A)
HP X130 SC LR XFP Transceiver (JD108B)
HP X120 1G SFP LC LH40 1550nm Transceiver (JD062A)
HP X130 LC SR XFP Transceiver (JD117B)
HP X125 1G SFP LC LH70 Transceiver (JD063B)
HP X135 LC ER XFP Transceiver (JD121A)
HP X115 100M SFP LC BX 10-D Transceiver (JD101A)
HP X110 100M SFP LC LH40 Transceiver (JD090A)
HP X110 100M SFP LC LH80 Transceiver (JD091A)
To learn more, visit www.hp.com/networking
© Copyright 2010 Hewlett-Packard Development Company, L.P. The information contained herein is subject
to change without notice. The only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing herein should be construed as
constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions
contained herein.
4AA3-0788ENN, Created August 2010