10/100/1000 Mbps and Standard and Extended Temperature (IE)
10/100 Ethernet SNMP-Manageable, Switching Media Converters
RoHS Compliant
iMcV-MediaLinX Series
The MediaLinX series offers the most flexible Ethernet switching
media converters in the industry.
Features and Benefits
Same unit converts speed, media and
duplex mode!
•Available in 10/100 Mbps and
10/100/1000 Mbps models
•IE-iMcV-MediaLinX supports SFP (LC)
transceivers and extended operating
temperatures
•Configure twisted pair port for Auto
Negotiation or force the speed
•Twisted pair and fiber ports can be
individually configured for Half- or
Full-Duplex operation
Switching
Easy to configure and manage with
GUI-based iView²
www.imcnetworks.com
•Up and running in less than 5 minutes
•Easily adjust settings when user
requirements change
•Easy upgrades; no user intervention or
visits to remote locations required
•Monitor and control all connections
Meets a variety of installation
requirements
•Available for multi-mode, single-mode
and CWDM fiber
•Available with single-strand fiber
Eases Troubleshooting
•LinkLoss, FiberAlert, SNMP management
and LEDs assist in diagnosing problems
on fiber optic networks
•Features Link Fault Pass-Through (LFPT),
a troubleshooting feature that monitors
the copper and fiber ports of the unit;
if a port loses LINK, the unit disables the
transmitting signal on the other port
(Pass-Through) and notifies the user via LED
•Supports Config Control, a feature that
retains the latest configuration on a
module regardless of how the initial
configuration was setup; whether by DIP
Switch or SNMP Management Module
(available on iMcV-MediaLinX)*
Dissimilar media types, protocols and duplex settings can
make LAN internetworking and Fiber-to-the-Subscriber projects
challenging undertakings. For example, if the service provider’s
network infrastructure is 100 Mbps or Gigabit fiber, but the
customer wants to receive a standard 10 Mbps Ethernet interface
to their LAN; making the connection between the two network
segments can be difficult. The complexity of today's mixed
media networks and the increasing demand for bandwidth
requires access equipment that is both flexible in connecting
different media types and scalable between different speeds.
Convert speed, media and duplex mode:
The iMcV-MediaLinX series of switching media converters
offers service providers and enterprise networks unparalleled
flexibility in connecting copper-based networks to Fast Ethernet
or Gigabit fiber optic infrastructures. The SNMP-manageable
iMcV-MediaLinX converters allow device managers to use Auto
Negotiation functionality on the twisted pair port for plug-andplay operation, or to manually configure the port for the desired
speed and duplex mode. What's more, you can even set the
fiber port for Half- or Full-Duplex operation (10/100 Mbps only).
The iMcV-MediaLinX series includes three models:
The iMcV-MediaLinX supports Config Control, a feature that
retains the latest configuration on the module regardless of how
the initial configuration was setup; whether through DIP Switch
settings or the SNMP Management Module’s configuration. This
feature is beneficial when 1) changing the settings of a currently
installed iMcV-Module through iView², 2) replacing the same
type of iMcV-Module, or 3) installing a new or different type of
iMcV-Module.
The iMcV-MediaLinX series also includes troubleshooting
features and LEDs to assist in network diagnostics as well
as make isolating cable breaks easier should they occur. In
addition, hot-swappable iMcV-MediaLinX modules significantly
reduce operating costs by allowing other modules within
the same chassis to remain up and running during product
upgrades, maintenance and troubleshooting.
* iView² v.1.8.9 and SNMP firmware v. C4 must
be installed to use the Config Control feature.
800-624-1070
Making Your Net
Work Better — Since 1988
Technical Specifications
IE-iMcV-MediaLinX TX/SFP
All Modules
• IEEE 802.3 10Base-T
• IEEE 802.3u 100Base-TX
• IE-SFP 100/155 Mbps (OC-3)
• Supports jumbo packets up to 1916 bytes
• Supports Config Control
Regulatory Approvals:
• Connectors: RJ-45 and ST, SC, LC or SFP
• IEEE 802.3x Flow Control
• AutoCross for MDI/MDIX
• Features LinkLoss and FiberAlert
• Features Link Fault Pass-Through (LFPT)
• Features Auto Negotiation and Selective Advertising
• Layer 2 packet switching, store and forward operation
• Forwarding rate: 14,881 pps for 10 Mbps; 148,810 pps
for 100 Mbps; 1,488,100 pps for 1000 Mbps (Gig only)
• 50/125µm or 62.5/125µm multi-mode fiber
• 9/125µm single-mode fiber
• Available for single-strand fiber
• Installs in any iMediaChassis or MediaChassis
• Supports GUI-Based iView²
• Supports Half- and Full-Duplex operation
• Includes diagnostic LEDs
• Includes hot-swappable architecture
iMcV-MediaLinX
• IEEE 802.3 10Base-T
• IEEE 802.3u 100Base-TX
• IEEE 802.3u 100Base-FX or SX fiber
• Supports jumbo packets up to 1916 bytes
• Supports Config Control
iMcV-Giga-MediaLinX
• IEEE 802.3 10Base-T
• IEEE 802.3u 100Base-TX
• IEEE 802.3ab 1000Base-T twisted pair
• IEEE 802.3z 1000Base-LX or SX fiber
• Supports packets up to 1632 bytes
• FCC Class B
• CE
Shipping Weight:
0.30 lbs (.11 kg)
Operating Temperature:
+32° to +122° F (0° to +50° C);
-40° to +185° F (-40° to +85° C) IE-iMcV-MediaLinX;
5% to 95% (non-condensing), 0 – 10,000 ft. altitude
Storage Temperature:
-13° to +158° F (-25° to +70° C);
5% to 95% (non-condensing)
Fiber Optics Specifications
For each product listed below in the Ordering Information section, the DISTANCE represents an approximate fiber distance based on industry-standard
fiber attenuation specifications. Actual distances will vary for each installation. For complete power budgets and information on calculating specific
distances, visit www.imcnetworks.com/go/fcs or contact IMC Networks Fiber Consulting Services at 949-465-3000.
Ordering Information
Part Number Description
IE-iMcV-MediaLinX TX/SFP 10/100 to 100 Mbps Modules
Distance
Part Number Description
iMcV-Giga-MediaLinX 10/100/1000 to 1000 Mbps Modules
Distance
856-18700
Varies
856-11959
iMcV-Giga-MediaLinX, TX/SX-MM850-ST
550 m
856-11950
iMcV-Giga-MediaLinX, TX/SX-MM850-SC
550 m
iMcV-MediaLinX, TX/SFP §
iMcV-MediaLinX 10/100 to 100 Mbps Modules
856-15711
iMcV-MediaLinX, TX/FX-MM850-ST
2 km
856-11951
iMcV-Giga-MediaLinX, TX/LX-SM1310-SC
15 km
856-15712
iMcV-MediaLinX, TX/FX-MM850-SC
2 km
856-10951-LC
iMcV-Giga-MediaLinX, TX/LX-SM1310-LC
15 km
856-15713
iMcV-MediaLinX, TX/FX-MM1300-ST
5 km
856-11952
iMcV-Giga-MediaLinX, TX/LX-SM1310/PLUS-SC
40 km
856-15714
iMcV-MediaLinX, TX/FX-MM1300-SC
5 km
856-11953
iMcV-Giga-MediaLinX, TX/LX-SM1550/LONG-SC
80 km
856-15717
iMcV-MediaLinX, TX/FX-SM1310/PLUS-ST
40 km
856-11958
iMcV-Giga-MediaLinX, TX/LX-SM1550/XLONG-SC
100 km
856-15718
iMcV-MediaLinX, TX/FX-SM1310/PLUS-SC
40 km
iMcV-Giga-MediaLinX 10/100/1000 to 1000 Mbps Single-Strand Fiber Modules *
856-15719
iMcV-MediaLinX, TX/FX-SM1310/LONG-ST
80 km
856-11940
iMcV-Giga-MediaLinX, TX/SSLX-SM1310-SC (1550rcv)
10 km
856-15720
iMcV-MediaLinX, TX/FX-SM1310/LONG-SC
80 km
856-11941
iMcV-Giga-MediaLinX, TX/SSLX-SM1550-SC (1310rcv)
10 km
856-15723
iMcV-MediaLinX, TX/FX-SM1550/LONG-SC
80 km
856-11933
iMcV-Giga-MediaLinX, TX/SSBX-SM1310-SC (1490rcv)
10 km
iMcV-MediaLinX 10/100 to 100 Mbps Single-Strand Fiber Modules *
856-11935
iMcV-Giga-MediaLinX, TX/SSBX-SM1490-SC (1310rcv)
10 km
856-15731
iMcV-MediaLinX, TX/SSFX-SM1310-SC (1550rcv)
20 km
856-11937
iMcV-Giga-MediaLinX, TX/SSBX-SM1310/PLUS-SC (1490rcv)
30 km
856-15732
iMcV-MediaLinX, TX/SSFX-SM1550-SC (1310rcv)
20 km
856-11939
iMcV-Giga-MediaLinX, TX/SSBX-SM1490/PLUS-SC (1310rcv)
30 km
856-15733
iMcV-MediaLinX, TX/SSFX-SM1310/PLUS-SC (1550rcv)
40 km
856-11942
iMcV-Giga-MediaLinX, TX/SSLX-SM1310/PLUS-SC (1550rcv)
40 km
856-15734
iMcV-MediaLinX, TX/SSFX-SM1550/PLUS-SC (1310rcv)
40 km
856-11943
iMcV-Giga-MediaLinX, TX/SSLX-SM1550/PLUS-SC (1310rcv)
40 km
856-15735
iMcV-MediaLinX, TX/SSFX-SM1310/LONG-SC (1550rcv)
60 km
856-11954
iMcV-Giga-MediaLinX, TX/SSLX-SM1490/LONG-SC (550rcv)
70 km
856-15736
iMcV-MediaLinX, TX/SSFX-SM1550/LONG-SC (1310rcv)
60 km
856-11955
iMcV-Giga-MediaLinX, TX/SSLX-SM1550/LONG-SC (1490rcv)
70 km
§ SFP modules are sold separately. For more information on compatible IMC Networks
SFPs, go to: www.imcnetworks.com/Products/product.cfm?family=32
* These products have single-strand fiber technology. For more information go to:
www.imcnetworks.com/products/SSFX.cfm
IE-SFP Modules: 100 to 155 Mbps (OC-3)
Part
Number
Part
Number
W/ DDMI
W/O
DDMI
808-38101
808-38102
808-38103
808-38104
808-38105
808-38525
808-38526
808-38111
808-38112
808-38113
808-38114
808-38115
808-38535
808-38536
IMC Networks
PORT DESCRIPTION
FIBER
DISTANCE
POWER
BUDGET
(db)
MM850
MM1300
SM1310
SM1310/PLUS
SM1550/LONG
SSFX-SM1310/1550/LONG
SSFX-SM1550/1310/LONG
Headquarters
19772 Pauling
Foothill Ranch, CA 92610
TEL: 949-465-3000
FAX: 949-465-3020
sales@imcnetworks.com
LC
LC
LC
LC
LC
LC
LC
IMC Networks
2 km
2 km
15 km
40 km
80 km
60 km
60 km
Europe
Herseltsesteenweg 268
B-3200 Aarschot, Belgium
TEL: +32-16-550880
FAX: +32-16-550888
eurosales@imcnetworks.com
14.5
15
13
31
31
31
31
IMC Networks
Eastern US/Latin America
28050 U.S. Hwy. 19 North, Suite 306
Clearwater, FL 33761
TEL: 727-797-0300
FAX: 727-797-0331
latinsales@imcnetworks.com
IMC Networks
Fiber Consulting Services
For information call:
TEL: 949-465-3000
1-800-624-1070 (US/CAN)
+32-16-550880 (Europe)
fcs@imcnetworks.com
Copyright © 2010 IMC Networks. All rights
reserved. The information in this document is
subject to change without notice. IMC Networks
assumes no responsibility for any errors that may
appear in this document. Specific product names
may be trademarks or registered trademarks and
are the property of their respective companies.
DS-iMcV-MediaLinX-1010