Home Network Cameras Wireless Type BL-C230 Indoor Use Only Access www.viewnetcam.com for registration information. * This logo mark is issued by the IPv6 Ready Logo Program Committee, an IPv6 promotion group established mainly by the IPv6 Forum. Save Your Worries with Remote Monitoring by Panasonic Home Network Camera Do you sometimes worry about things at home while you're at work or on vacation? Panasonic network cameras let you monitor your room over the Internet from wherever you are. They even notify you by e-mail when they detect moving objects. And you can choose the video format to match the Internet connection and your viewing needs. Let Panasonic network cameras keep an eye on things anytime, anywhere - so you can relax and enjoy yourself. BL-C230 Monitoring various locations Entrance See There When You Can't Be There Kid's room Pet activity System Diagram Panasonic network cameras support UPnP and DDNS, so it's easy to set up the network and access cameras over the Internet with an ID and password. Network Router/ Camera Modem Home Office Outdoors Feel Safer with Panasonic BL-C230 Connection Capture Others External Input and Output Turning privacy mode on Wireless communication With privacy mode you can shut the camera lens and protect yourself from unwanted exposure. Operation is simple - you Privacy button only need to push the privacy button. Install the camera anywhere*1 with no transmission cables to connect, and enjoy high-speed communications at 2.4 GHz, 54 Mbps*2 (IEEE 802.11g) or 2.4 GHz, 11 Mbps*2 (IEEE 802.11b). Sensors and switches can be connected to the camera through two external Input ports and one Output port. Sensor e-mail Sensor Internet PC FTP transfer *1 Cannot be used in bathrooms or outdoors. *2 The indicated speed is the maximum theoretical value of the wireless LAN specification, and does not denote the actual data transfer speed achieved by the cameras. Data transmission / H.264 adopted PC The adoption of H.264/ACV has enabled reduction of data volume by more than 30% compared to MPEG-4 when transmitting data of the same image quality. Colour Night View Mode*1 When the subject darkens, the camera automatically adjusts the brightness to show you the image. You can see clear, easy-to-view images even in the dark. Comparison of data size Data size MPEG-4 Over -30% Data size OFF reduction H.264 ON BL-C230 IEEE802.11b/g wireless connection Part Names BL-C230 Antenna Front View PRIVACY button Built-in sensor (pyroelectric infrared sensor) Speaker (for built-in alarm) Capture Alerting Yourself when Changes Occur The camera’s built-in microphone collects peripheral noise and when camera detects the noise exceeding the threshold it stores the image captured. This is a newly added function. No noise detected Noise detected Power Indicator *1 The image tends to blur more than that in standard mode when viewing a moving subject in low light. When viewing a dark subject in Colour night view mode, spots of white or Coloured light may appear in the image. Some subjects may require additional time for focusing with the auto focus function. View Lens Lens cover Microphone Rear View Wall mounting holes Full Screen Display The monitoring image is easier to see because it fills the entire screen. W BO OW W Normal mode Tripod Mounting Hole LAN port Full screen mode External I/O interface DC IN jack Noise threshold Noise threshold Detection level exceeding noise threshold WIRELESS/WIRED switch FACTORY DEFAULT RESET button Specifications [BL-C230] Network camera Viewing Angle Pan/Tilt Angle Sensor Type Lens focal point Aperture (F No.) Illuminance 58˚ horizontal 45˚ Vertical Pan: -41 ° to +41 °, Tilt: -32 ° to +10 ° 1/4 inch CMOS Progressive Scan, approx. 320,000 pixel Fixed (focal range: 0.3 m to Infinity) F2.8 5–10,000 lx (3–10,000 lx when in Colour Night View mode) Terminal Network interface External interface Ethernet (10Base-T/100Base-TX) Input (2) Onput (1) Server Image compression*1 H.264, MPEG-4, Motion JPEG for moving image display Video resolution H.264: 640 x 480, 320 x 240 MPEG-4: 640 x 480, 320 x 240, 192 x 144 JPEG: 640 x 480, 320 x 240, 192 x 144 Max. 30 frames/sec. (640 x 480, 320 x 240, 192 x144) Frame rate*2 User ID / Password/SSL Security Supported protocols Wireless IPv4 / IPv6 Dual-Stack IPv4: TCP, UDP, IP, HTTP, FTP, SMTP, DHCP, DNS, ARP, ICMP, POP3, NTP, UPnPTM, Auto IP, SMTP Authentication, RTP, RTSP, RTCP IPv6: TCP, UDP, IP, HTTP, FTP, SMTP, DNS, ICMPv6, POP3, NDP, NTP, RTP, RTSP, RTCP Communication Standard IEEE 802.11b, 802.11b/g, 802.11g exclusive User access limit 2/H.264, 4/MPEG-4, 10/MotionJPEG Data Transfer Mode IEEE 802.11b: Direct Sequence Spectrum Spread (DS-SS) IEEE 802.11g: Orthogonal Frequency Division Multiplexing (OFDM) Buffered images Approx. 1160 images (320 x 240) -Standard image quality -with time display Frequency Range BL-C230CE/BL-C230E:2.412-2.472 GHz Image transfer method SMTP*3, FTP, HTTP Channel Security BL-C230CE/BL-C230E:1-13 SSID, WEP (64/128/152 bit), WPA-PSK (TKIP), WPA2-PSK (AES) Image buffer/ transfer triggers ・When you use more than one(1) PCs to see any moving image by H.264 or MPEG-4, you are requested to buy User License Accessory additionally. Timer, Sensor, Alarm 1, Alarm 2, Motion Detection, Sound Detection General Operating Temperature Operation: +0˚C (+32˚F) to +40˚ (+104˚F) Storage: -10˚C (+14˚F) to +50˚C (+122˚F) Operating humidity Operation: 20 %-80 % (no condensation) Storage: 20 %-90 % (no condensation) Dimensions(H x W x D) 74 mm x 74 mm x 101 mm (2 15/16 inches x 2 15/16 inches x 4 inches) Weight (only the unit) Power Supply Consumption 260 g (0.57 lb) BL-C230CE: AC adaptor (order no. PQLV206CEY) Input 100-240 V AC, 50/60 Hz Output 9 V DC, 750 mA BL-C230E: AC adaptor (order no. PQLV206EY) Input 220-240 V AC, 50/60 Hz Output 9 V DC, 750 mA About 4.0 W (7.7 W during pan/tilt scan) *1 H.264 and MPEG-4 cannot browse at the same time. *2 The frame rate may slow down depending on the network environment, PC performance, image quality, memory recording, when Colour night view mode is activated, etc. *3 The camera supports POP Before SMTP Authentication and SMTP Authentication. PLAIN, LOGIN, and CRAM-MD5 SMTP Authentication are supported. SSL supports SMTP over SSL. STARTTLS is not supported. http://panasonic.net/pcc/ipcam 0911 BL-C2300910 All pictures simulated. Design and specifications are subject to change without notice.