CLUB3D Mini DisplayPort to DisplayPort Adapter Cable

Mini DisplayPort to DisplayPort cable
A
C
C
E
S
S
O
R
I
E
Club 3D UltraAV Mini DisplayPort to DisplayPort cable enables the
connection of your Mini DisplayPort supported computer to an DisplayPort
supported television, monitor or projector. Simply connect the Mini
DisplayPort (male) end of the connector to your computer and plug your
existing DisplayPort cable from the display into the DisplayPort (female)
adapter. Setup is complete; no software to install. The circuitry built-into the
adapter seamlessly converts the Mini DisplayPort’s A/V signal into an
DisplayPort A/V signal and requires no external power.
S
Connector 1
Mini DisplayPort Male
Connections
Connector 2
DisplayPort Female
Compatibility
Club 3D graphics cards with Mini
DisplayPort output or any Mini
DisplayPort compatible device.
Mini DisplayPort
DisplayPort
Length
130mm
Mini DisplayPort
DisplayPort
Disclaimer
While we endeavor to provide the most accurate, up-to-date information available, the content on this document
may be out of date or include omissions, inaccuracies or other errors. Therefore Club 3D does not accept any rights
claimed on the content of this document. Please refer to a full overview of our Legacy Terms and Conditions on www.
club-3d.com. All other brand names are trademarks or registered trademarks and are the property of their respective
owners. All content is subject to change without prior notice.
Copyright © 2010, Club 3D B.V. Rev. 1.1
Item code: CAC-1110
EAN code: 8717249408512
23 September 2010
www.club-3d.com