Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: saleshelp@tripplite.com
Model #: SU80K
SmartOnline Modular 3-Phase UPS System - Modular 3-Phase on-line, double-conversion protection for
mission critical applications
Highlights
80,000 VA (80kVA) tower UPS with 4 hot-swappable power modules
N+1 redundant modular architecture helps ensure 100% availability
1+1 parallel capability allows for system redundancy or increased capacity
Low THDi saves installation costs by allowing 1:1 generator sizing
3-phase hardwire (120/208VAC) input/output. Wide input voltage correction
range (94-150VAC/163-260VAC)
On-line, double-conversion operation with zero transfer time; IGBT
technology; extremely efficient operation (up to 96%)
Runtime is expandable via external battery cabinet options
Description
Tripp Lite's SU80K (80kVA) SmartOnline Modular 3-Phase Intelligent, True On-Line UPS System provides 100% system availability with N+1
modular architecture and 1+1 parallel capability. In an N+1 configuration, the SU80K features four self-contained, redundant 20kVA power modules
that can be hot-swapped (with the load powered) if maintenance is required. Connect two SU80K models in parallel (1+1 configuration) to provide
fail-safe redundancy (two 80kVA models supporting a 80kVA load) or to increase capacity (two 80kVA models supporting a 160kVA load).
The SU80K provides mission-critical equipment with the highest level of power protection available. Large capacity 80,000VA/64,000W UPS
continually converts incoming AC power into filtered DC power, and then resynthesizes it back into AC power with a pure sine wave. Perfectly
regulated, continuous sine wave output with zero transfer time offers compatibility with all equipment types. The SU80K's high input power factor,
advanced IGBT inverter technology and Digital Signal Processor (DSP) technology create less than 3% input Total Harmonic Distortion (THDi). With
SU80K's low THDi, generators run cooler and last longer, allowing managers to save installation costs by installing a generator with a capacity equal
to their equipment load (a 1:1 ratio). Extremely efficient operation (up to 96%) saves money by lowering electricity consumption. Hardwire input and
output connections support a variety of permanent or PDU style power connections. The SU80K features 120/208V AC, 3-phase, 4-wire (plus
ground), wye input and output. It also features a wide input voltage correction range: 94-150/163-260VAC. Frequency is 50 or 60 Hz
(auto-selectable). The SU80K features a single small-footprint tower power module. A stand-alone hardwired external battery module (Models
BP480V26B or BP480V40C with matching battery cabinets, available separately) is required for operation and to provide battery backup support.
Additional external BP480V26B or BP480V40C battery modules can be connected for extended runtime. Other battery cabinets for extended runtime
solutions also available; contact Tripp Lite for more information. A manual bypass breaker as well as an automatic bypass function ensure 100%
availability of connected equipment by safely passing through AC power if the UPS requires maintenance. A built-in RS-232 communication port
works with included PowerAlert Software to provide shutdown commands and reporting on a single server. An accessory slot accepts an optional
internal SNMP card (Model SNMPWEBCARD) for remote shutdowns, reboots and more. Front panel combination LCD/LED display alerts users to a
variety of UPS operational modes and conditions. The LCD display includes a real-time event log screen with up to 500 events listed. A dynamic
battery management screen optimizes battery function to lengthen service life and allows cold restart of UPS during a prolonged blackout to utilize
its batteries for periodic system access or data retrieval. An Emergency Power Off button turns UPS output OFF and disables Bypass output. Built-in
Emergency Power Off (EPO) dry-contact interface supports remote emergency shutdown in large facilities. 1-year
A
limited repair warranty is included.
A start-up service program is recommended to enhance the reliability of the installation.
Package Includes
SU80K UPS System
PowerAlert Software and cabling
Parallel cable (for 1+1 operation)
Instruction manual and startup checklist
Warranty information
Features
N+1 configuration: four self-contained, redundant 20kVA power modules can be hot-swapped (with the load powered) if maintenance is
required
1+1 configuration: connect two SU80K models in parallel to provide fail-safe redundancy or to increase capacity
High input power factor, advanced IGBT inverter technology and Digital Signal Processor (DSP) technology create low input Total Harmonic
Distortion (THDi)
Extremely efficient operation (up to 96%) saves money by lowering electricity consumption
True on-line, double conversion UPS with IGBT technology provides pure, sine wave AC output at all times
Maintains continuous operation through blackouts, voltage fluctuations and surges with zero transfer time
Removes harmonic distortion, electrical impulses, frequency variations and other hard-to-solve power problems
80,000VA/64,000W power capacity with 3-phase, hardwire 120/208VAC input/output connections
Features a wide input voltage correction range: 94-150/163-260VAC
A stand-alone hardwired external battery module (Models BP480V26B and BP480V40C, available separately from Tripp Lite) is required for
operation and to provide battery backup support. Additional external battery modules can be connected for extended runtime.
Front panel combination LCD/LED display includes a real-time event log screen with up to 500 events listed
Dynamic battery management screen optimizes battery function to lengthen service life and allows cold restart of UPS
Built-in RS-232 communication port works with included PowerAlert Software to provide shutdown commands and reporting on a single
server
Accessory slot accepts an optional internal SNMP card (model # SNMPWEBCARD) for remote shutdowns, reboots and more
Emergency Power Off button turns UPS output OFF and disables Bypass output
Built-in Emergency Power Off (EPO) dry-contact interface supports remote emergency shutdown in large facilities
1-year limited repair warranty
Start-up service program is recommended to enhance the reliability of the installation
Specifications
OUTPUT
Output Volt Amp
Capacity (VA)
80000
Output kVA capacity
(kVA)
80
Output Watt
Capacity (watts)
64000
Output kW capacity
64
Output power factor
0.8
Crest Factor
3:1
Nominal Output
Voltage(s) Supported
120/208V; 3-Phase Wye
Frequency
compatibility
50 / 60 Hz
Output voltage
regulation (line
mode)
+/- 2%
Output voltage
regulation (Battery
mode)
+/- 2%
Built-in UPS output
receptacles
Hardwire
Output AC waveform
(AC mode)
Sine wave
Output AC waveform
(battery mode)
Pure Sine wave
INPUT
Nominal Input
Voltage(s) Supported
120V / 208V 3 phase wye
UPS input
connection type
Hardwire
UPS input
connection
description
120/208V (3-Phase, 4 Wire, wye)
BATTERY
Expandable battery
runtime
Battery set sold separate
External battery
pack compatibility
BP480V26B; BP480V40C; BP480V55; BP480V78; BP480V103; BP480V140
Expandable runtime
description
External battery pack wiring is contractor supplied
DC system voltage
(VDC)
240
Battery recharge
rate (included
batteries)
2 - 4 hours from 10% to 90%
Battery replacement
description
Hot-swappable, replaceable batteries
VOLTAGE REGULATION
Voltage regulation
description
Online, double-conversion power conditioning
Overvoltage
correction
Maintains continuous operation without using battery power during overvoltages to 150 / 260 (3-Phase, 4-Wire, wye),
reducing output within 1% of nominal
Undervoltage
correction
Maintains continuous operation without using battery power during brownout / undervoltage conditions to 94 / 163
(3-Phase, 4-Wire, wye)
LEDS ALARMS & SWITCHES
LED Indicators
4-LED Display: Displays normal AC input, on battery power, bypass input and fault conditions
Alarms
Alarms warn against a variety of operational conditions: low-battery, overload, shutdown, bypass and more
Alarm cancel
operation
Power-fail alarm can be silenced using alarm-cancel switch
Switches
ON button turns UPS's inverter ON. OFF button turns UPS's inverter OFF. LCD Display Control Buttons browses
through and selects items displayed on LCD screen. Emergency Power Off button turns UPS output OFF and
disables Bypass output. Manual Bypass breaker bypasses the UPS's inverter during maintenance.
SURGE / NOISE SUPPRESSION
UPS AC
suppression joule
rating
4675
UPS AC
suppression
response time
Instantaneous
EMI / RFI AC noise
suppression
Yes
AC suppression
joule rating
4675
AC suppression
response time
Instantaneous
PHYSICAL
Installation form
factors supported
with included
accessories
Tower
Primary form factor
Tower
UPS / Power Module
dimensions in
primary form factor
(height x width x
depth / inches)
66.9 x 20.5 x 37.7
UPS / Power Module
dimensions in
primary form factor
(height x width x
depth / cm)
169.9 x 52.1 x 95.8
Installed whole
system maximum
rack depth (cm)
0
UPS / Power Module
weight (lbs)
1287.5
UPS / Power Module
weight (kg)
584.5
UPS Shipping
dimensions (height
x width x depth /
inches)
76.2 x 28.8 x 45.5
UPS Shipping
dimensions (height
x width x depth / cm)
193.7 x 73 x 115.6
Shipping weight (kg)
0
UPS housing
material
Steel
Cooling method
Fans
ENVIRONMENTAL
Operating
Temperature Range
+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage
Temperature Range
+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity
0 to 95%, non-condensing
COMMUNICATIONS
Communications
interface
DB9 Serial; Slot for SNMP/Web interface
PowerAlert software
Included
Communications
cable
DB9 cabling included
LINE / BATTERY TRANSFER
Transfer time
No transfer time (0 ms.) in online, double-conversion mode
Low voltage transfer
to battery power
(setpoint)
Maintains continuous operation during undervoltages as low as 94 / 163V AC (3-Phase, 4-Wire, wye). Below this
point, output is maintained utilizing battery reserves.
High voltage transfer
to battery power
(setpoint)
Maintains continuous operation during overvoltages as high as 150 / 260V AC (3-Phase, 4-Wire, wye). Above this
point, output is maintained utilizing battery reserves.
SPECIAL FEATURES
Cold Start (startup in
battery mode during
a power failure)
Cold-start operation supported
High availability UPS
features
Automatic inverter bypass; Hot swappable batteries
Green & high
efficiency features
High efficiency economy mode operation; Schedulable daily hours of economy mode operation
CERTIFICATIONS
UPS Certifications
Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A (EMI);
ROHS (Reduction of Hazardous Substances)
WARRANTY
Product Warranty
Period (U.S., Canada
& Puerto Rico)
1-year limited warranty
Related Items
Required Products
Product Type
Related Model
Description
Qty.
Start-Up/Warranty
Services
W06-BW1-247-1B
3-Phase UPS System (60k & 80k) Start-Up and On-Site Warranty
Service Programs
1
Start-Up/Warranty
Services
W06-BW1-247
3-Phase UPS System (60k & 80k) Start-Up and On-Site Warranty
Service Programs
1
Optional Products
Product Type
Related Model
Description
Qty.
SNMP Accessories
SNMPWEBCARD
For remote monitoring and control via SNMP, Web, or Telnet.
-
SNMP Accessories
ENVIROSENSE
Monitors temperature, humidity and contact-closure inputs. (Requires
SNMPWEBCARD or switched PDU.)
-
Start-Up/Warranty
Services
W06-EW1-247
3-Phase UPS System (60k & 80k) Start-Up and On-Site Warranty
Service Programs
-
Start-Up/Warranty
Services
W06-EW1-247-1B
3-Phase UPS System (60k & 80k) Start-Up and On-Site Warranty
Service Programs
-
Start-Up/Warranty
Services
W06-SCBAS1
3-Phase UPS System (60k & 80k) - Basic Warranty Service Contracts
-
Start-Up/Warranty
Services
W06-SCBAS1-1B
3-Phase UPS System (60k & 80k) - Basic Warranty Service Contracts
- Includes primary battery cabinet plus one additional battery cabinet
-
Start-Up/Warranty
Services
W06-SCENH1
3-Phase UPS System (60k & 80k) - Premium Warranty Service
Contracts
-
Start-Up/Warranty
Services
W06-SCENH1-1B
3-Phase UPS System (60k & 80k) - Premium Warranty Service
Contracts - Includes primary battery cabinet plus one additional battery
cabinet
-
UPS Accessories
SU80KMBPK
3 Breaker Maintenance Bypass Panel for SU80K
-
Parallel Tie Cabinets
SUPT80K
3-Breaker Parallel Tie Cabinet (for SU80K 3-Phase UPS)
-
External Battery Packs
BP480V26B
External Battery Pack for Select 3-Phase UPS Systems
-
External Battery Packs
BP480V40C
External Battery Pack for Select 3-Phase UPS Systems
-
External Battery Packs
BP480V55
External Battery Pack for Select 3-Phase UPS Systems
-
External Battery Packs
BP480V78
External Battery Pack for Select 3-Phase UPS Systems
-
External Battery Packs
BP480V103
External Battery Pack for Select 3-Phase UPS Systems
-
External Battery Packs
BP480V140
External Battery Pack for Select 3-Phase UPS Systems
-
External Battery Packs
BPE480VB
External Battery Pack for Select 3-Phase UPS Systems
-
External Battery Packs
BPE480VC
External Battery Pack for Select 3-Phase UPS Systems
-
More information, including related products, owner's manuals, and additional technical specifications, can be found online at
www.tripplite.com/en/products/model.cfm?txtModelID=3791.
Copyright © 2011 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous
improvement. Specifications are subject to change without notice. Photos may differ slightly from final products.