Tripp Lite SmartOnline 200-240V 6kVA 4.2kW On-Line Double-Conversion UPS, Extended Run, SNMP, Webcard, 6U Rack/Tower, DB9 Serial, Hardwire

SmartOnline 200-240V 6kVA 4.2kW On-Line
Double-Conversion UPS, Extended Run, SNMP,
Webcard, 6U Rack/Tower, DB9 Serial, Hardwire
Highlights
6000VA / 6kVA / 4200W on-line
double-conversion UPS
200/208/220/230/240V 50/60Hz
output, Economy mode option
MODEL NUMBER: SU6000RT3UHV
6U Rack/Tower compatible;
Hot-swappable battery modules
RS232 & EPO ports; support for
SNMP/WEB card options
Front panel LEDs with detailed
LCD monitoring and control
screen
Ships with standard capacity
BP240V7RT3U battery pack
Hardwire input (3 wire); Hardwire
output
Package Includes
SU6000RT3UPM 3U Power
Module
Description
BP240V7RT3U non-expandable
Tripp Lite Smart Online UPS systems offer high performance power protection ideal for critical server and
network equipment in datacenters, computer rooms and network closets. Online, double-conversion
Uninterruptible Power Supply (UPS) maintains perfectly regulated output power by continuously converting raw
AC input to DC, then re-converting output back to AC. Fully regulated sine wave AC output with +/-2% voltage
regulation powers network equipment continuously, even during severe brownouts and overvoltages, all without
depleting UPS battery reserves. Maintains battery-derived AC output during power failures with zero transfer
time. Extended runtime options available. Interactive LCD interface reports UPS operating mode, detailed UPS
and site-power data, plus enables a variety of UPS setup and configuration options. Highly efficient operation in
3U battery pack
PowerAlert software and
complete cabling
Complete mounting hardware for
4 post rack installation
2-9USTAND tower stand set
Warranty information
Instruction manual
optional economy mode saves BTU heat output and energy costs. Network management interfaces support
communications via RS-232, contact-closure and optional SNMPWEBCARD network interface. Built-in DB9 port offers both enhanced RS-232 data and basic
contact closure monitoring ability. Includes PowerAlert monitoring software and complete cabling. Emergency Power Off (EPO) interface. LED display reports
UPS operating mode, line power availability, battery mode operation, inverter operation, ECO mode status and output power availability. Audible alarm with
push-button momentary alarm-cancel and silent-mode LCD configuration options. Programmable self-test. Fault-tolerant auto-bypass mode. Field-replaceable,
hot-swappable internal batteries and external battery packs.
Features
True on-line, double conversion UPS provides pure, sine wave AC output at all times
World-wide compatibility with Euro 50Hz and High Voltage North American 60Hz power
Maintains continuous operation through blackouts, voltage fluctuations and surges with zero transfer time
Removes harmonic distortion, electrical impulses, frequency variations and other hard to solve power problems
6000VA/4200 watt power capacity with hardwire input/output connections
Accepts input voltages between 156 and 276, regulating output within 2% of selectable 200/208/220/230/240v AC output
20 minutes runtime at half load (2100W) / 8 minutes at full load (4200W) with included BP240V7RT3U external battery pack
Expandable runtime with multiple external battery packs
1/6
Innovative design makes unit adaptable for rackmount, tower, or stacking applications
Power module and battery pack require only 3 rack spaces each (6U total rack space usage)
DB9 serial port for network interface; SNMP compatible
Slot for optional SNMP/web card (part# SNMPWEBCARD)
PowerAlert unattended shutdown software and 6 ft. network cable included
Fault tolerant electronic bypass maintains utility output during a variety of UPS fault conditions
Diagnostic LEDs
Mounting hardware included with each 3U module for 4 post rackmount installation, 2 post telecom rack compatible with separate purchase
2POSTRMKITHD (2 required)
Includes RJ11 EPO (emergency power off) port and interconnection cable
$250,000 Ultimate Lifetime Insurance (USA , Puerto Rico, & Canada Only)
Specifications
General Info
RoHS
Y
OUTPUT
Output Capacity Details
Supports up to 102% load continuously in double conversion mode, 102 to 125% for 1 minute, 126% to 150% for 30
seconds; Loads over 150% trigger immediate bypass mode operation to support loads directly from mains power;
Double conversion mode is automatically restored as load levels are reduced to 90% or less
Output Volt Amp Capacity (VA)
6000
Output kVA Capacity (kVA)
6
Output Watt Capacity (Watts)
4200
Output kW Capacity (kW)
4.2
Power Factor
0.7
Crest Factor
3:1
Nominal Output Voltage(s)
Supported
200V; 208V; 220V; 230V; 240V
Nominal Voltage Details
Voltage selection via front panel LCD interface
Frequency Compatibility
50 / 60 Hz
Frequency Compatibility Details
Output frequency matches input nominal on startup
Output Voltage Regulation (Line
Mode)
+/- 2%
Output Voltage Regulation
(Economy Line Mode)
+/- 10%
Output Voltage Regulation (Battery
Mode)
+/- 2%
Output Receptacles
Hardwire
Output Receptacle Backplate
Options
Optional SUPDM11 backplate adds 2 L6-30R outlets and L6-30P input cord
2/6
Output Circuit Breakers
40A double-pole
Output AC Waveform (AC Mode)
Pure Sine wave
Output AC Waveform (Battery Mode)
Pure Sine wave
INPUT
Rated input current (Maximum Load)
30A
Nominal Input Voltage(s) Supported
200V AC; 208V AC; 220V AC; 230V AC; 240V AC
UPS Input Connection Type
Hardwire
UPS Input Connection Description
Supports North American 208/240V input (L1,L2,G) and International 230/220/240V (L,N,PE) input wiring; Optional
SUPDM11 backplate adds 2 L6-30R outlets and L6-30P input cord
Input Circuit Breakers
40A double-pole
Recommended Electrical Service
30A 208/220/230/240V
Input Phase
Single-Phase
BATTERY
Full Load Runtime (min.)
8 min. (4200w)
Half Load Runtime (min.)
20 min. (2100w)
Expandable Battery Runtime
Includes one non-expandable BP240V7RT3U (limit 1) external battery pack. No additional BP240V7RT3U external
battery packs can be connected to the host UPS, beyond the one included with the SU6000RT3UHV UPS bundle.
All additional battery packs connected beyond the included BP240V7RT3U, must be BP240V10RT3U ,
BP240V557C-1PH , BP240V787C-1PH , BP240V1037C-1PH or BP240V1407C-1PH
External Battery Pack Compatibility
BP240V10RT3U ; BP240V557C-1PH ; BP240V787C-1PH ; BP240V1037C-1PH ; BP240V1407C-1PH
DC System Voltage (VDC)
240
Battery Recharge Rate (Included
Batteries)
Less than 6 hours from 10% to 80% (typical, full load discharge)
Battery Replacement Description
Hot-swappable, user replaceable batteries
VOLTAGE REGULATION
Voltage Regulation Description
Online, double-conversion power conditioning
Overvoltage Correction
2% output voltage regulation during overvoltages to 276
Undervoltage Correction
2% output voltage regulation during undervoltages to 156
USER INTERFACE, ALERTS & CONTROLS
Front Panel LCD Display
Selectable LCD display with scroll and selection buttons enables UPS control and detailed monitoring options;
LED/LCD panel rotates for viewing in rack/tower formats (see manual)
Switches
2 Switches control off/on power status and alarm-cancel/self-test operation; 2 additional switches support set and
execute scrolling LCD functions
Alarm Cancel Operation
Alarm cancel switch
Audible Alarm
Unique audible alarms for all major UPS, environmental and power conditions (see manual)
3/6
LED Indicators
6 LEDs indicate line power, online mode, economy/bypass mode, on-battery, charger and AC output status; LCD
screen offers additional information and control options
SURGE / NOISE SUPPRESSION
UPS AC Suppression Response
Time
Instantaneous
EMI / RFI AC Noise Suppression
Yes
PHYSICAL
Included Mounting Accessory
Description
2 sets of adjustable 4 post rack rails included (for UPS and battery pack components); 2-9USTAND tower kit
included (supports up to 9U in tower format)
Installation Form Factors Supported
with Optional Accessories
2 post rackmount (2POSTRMKITHD)
Optional Mounting Accessory Notes
2 sets of 2POSTRMKITWM required for 2 post rackmount installation of separate power module and battery pack
Primary Form Factor
Rackmount
UPS Power Module Dimensions
(hwd, in.)
5.2 x 17.5 x 26
UPS Power Module Dimensions
(hwd, cm)
13.3 x 44.4 x 66
Installed Whole System Maximum
Rack Depth (in.)
26
Installed Whole System Maximum
Rack Depth (cm)
66
Rack Height (U Spaces)
6
UPS Power Module Weight (lbs.)
43.8
UPS Power Module Weight (kg)
19.9
UPS Dimensions Details
Includes 3U power module and 3U battery pack
Included Battery Pack Dimensions
(hwd / in.)
5.2 x 17.5 x 25
Included Battery Pack Dimensions
(hwd / cm)
13.3 x 44.4 x 63.5
Included Battery Pack Weight (lbs.)
136.5
Included Battery Pack Weight (kg)
62
UPS Shipping Dimensions (hwd / in.)
24.5 x 24 x 35
UPS Shipping Dimensions (hwd /
cm)
62.2 x 61 x 88.9
Shipping Weight (lbs.)
323
Shipping Weight (kg)
146.6
Cooling Method
Fan
UPS Housing Material
Steel
4/6
ENVIRONMENTAL
Operating Temperature Range
+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius.
Storage Temperature Range
+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius.
Relative Humidity
0 to 95%, non-condensing
AC Mode BTU / Hr. (Full Load)
1412.3
AC Economy Mode BTU / Hr. (Full
Load)
911.5
AC Mode Efficiency Rating (100%
Load)
91%
AC Economy Mode Efficiency Rating
(100% Load)
94%
Operating Elevation (ft.)
0-3000m (0 to 10,000 ft.)
Audible Noise
60 dBA at front side 1 meter
COMMUNICATIONS
Communications Interface
DB9 Serial; Contact closure; EPO (emergency power off); Slot for SNMP/Web interface
Network Monitoring Port Description
RS232 and contact closure communications are located on two separate DB9 ports
PowerAlert Software
Included
Communications Cable
DB9 cable included
LINE / BATTERY TRANSFER
Transfer Time
No transfer time (0 ms.) in online, double-conversion mode
Transfer Time (Economy Mode)
Less than 1ms typical power failure response in optional economy mode
Low Voltage Transfer to Battery
Power (Setpoint)
156
High Voltage Transfer to Battery
Power (Setpoint)
276
SPECIAL FEATURES
Cold Start (Startup in Battery Mode
During a Power Failure)
Cold-start operation supported
High Availability UPS Features
Automatic inverter bypass; Hot swappable batteries
Green Energy-Saving Features
High efficiency economy mode operation; Schedulable daily hours of economy mode operation
CERTIFICATIONS
UPS Certifications
Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); CE; Tested to GOST (Russia);
Tested to SASO (Saudi Arabia); Tested to IRAM (Argentina); Meets FCC Part 15 Category A (EMI); ROHS
(Restriction of Hazardous Substances)
WARRANTY
5/6
Product Warranty Period (Worldwide)
2-year limited warranty
© 2015 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous improvement.
Specifications are subject to change without notice. Photos may differ slightly from final products.
6/6
Open as PDF
Similar pages
Tripp Lite SmartOnline 208/120V or 240/120V 6kVA 4.2kW On-Line Double-Conversion UPS, Extended Run, SNMP, Webcard, 9U Rack/Tower, USB, DB9 Serial, Hardwire
Tripp Lite SmartOnline 240/120V or 208/120V 10kVA 9kW On-Line Double-Conversion UPS, Extended Run, SNMP, Webcard, 9U, USB, DB9 Serial, Hardwire
Tripp Lite SmartOnline 200-240V 5kVA 3.5kW On-Line Double-Conversion UPS, Extended Run, SNMP, Webcard, 5U Rack/Tower, DB9 Serial
Tripp Lite SmartOnline 208/120V 5kVA 3.5kW On-Line Double-Conversion UPS, Extended Run, SNMP, Webcard, 7U Rack/Tower, USB, DB9 Serial
Tripp Lite SmartOnline 200-240V 6kVA 4.2kW On-Line Double-Conversion UPS, Extended Run, SNMP, Webcard, 6U Rack/Tower, DB9 Serial, Hardwire
Tripp Lite SmartOnline 200-240V 10kVA 9kW On-Line Double-Conversion UPS, Extended Run, SNMP, Webcard, 6U, Hardwired, Bypass Switch
Tripp Lite SmartOnline 200-240V 16kVA 14.4kW On-Line Double-Conversion UPS, N+1, Extended Run, SNMP, Webcard, 12U Rack/Tower, USB, DB9 Serial, C19 Outlets
Tripp Lite SmartOnline 200-240V, 16kVA 14.4kW On-Line Double-Conversion UPS, N+1, Extended Run, SNMP, Webcard, 12U Rack/Tower, USB, DB9 Serial, Hardwire
Tripp Lite SmartOnline SU8000RT3U1TF User's Manual
Tripp Lite SU6000RT3UHV User's Manual
Tripp Lite SmartOnline 208/120V or 240/120V 16kVA 14.4kW On-Line Double-Conversion UPS, N+1, Extended Run, SNMP, Webcard, 14U Rack/Tower, USB, DB9 Serial
Tripp Lite 6kVA / 6kW Stepdown Isolation Transformer - converts 208 or 240V to 120V
Tripp Lite External 240V Tower Battery Pack for select UPS Systems (BP240V1037C-1PH)
Basic power quality methodology and common culprits
Tripp Lite SmartOnline SU5000RT3U User's Manual
Tripp Lite ENVIROSENSE User's Manual
Tripp Lite SU20KRT uninterruptible power supply (UPS)
Tripp Lite SmartOnline SU8000RT3U User's Manual
SU6000RT3U
Tripp Lite 10KVA Power Supply User Manual
Tripp Lite SU20KRT-1TF uninterruptible power supply (UPS)
SmartOnline 6kVA On-Line Double-Conversion UPS