Tripp Lite PowerVerter APS X 750W 12VDC 230V Inverter/Charger with Auto-Transfer Switching, 2-C13 Outlets

PowerVerter APS X 750W 12VDC 230V
Inverter/Charger with Auto-Transfer Switching,
2-C13 Outlets
Highlights
12V DC or 230V AC input; 230V,
50 Hz output; 2 AC outlets
750 watts continuous, 1125 watts
OverPower™ and 1500 watts
MODEL NUMBER: APSX750
DoubleBoost™ inverter output
(see specifications)
3-stage, selectable 5 / 20 amp,
wet/dry cell battery charger with
1/2 cycle transfer time
Auto Transfer Switching option
for battery backup / UPS
operation
Reliability enhanced
large-transformer design with
protected DC terminals
Applications
Versatile inverter/charger system
with auto-transfer switching
Description
serves as an automotive inverter
Tripp Lite's APSX750 DC-to-AC inverter with automatic line-to-battery transfer and integrated charging system
serves as an extended run UPS, a standalone power source or an automotive inverter. Supplies up to 750 watts
of continuous 230V AC power to 2 AC outlets from any 12V battery or automotive DC source. OverPower
inverter output feature temporarily provides up to 150% of the continuous output for 1-60 minutes and
DoubleBoost inverter output feature delivers up to 200% of the continuous output for up to 10 seconds, providing
the extra power needed to cold start heavy-duty tools and motorized equipment. When AC cable is connected to
a live wall socket, commercial power passes through to connected equipment and the battery set is recharged
via 3-stage, selectable 5/20 amp charging system. In UPS mode, the APS system responds to blackouts and
voltage fluctuations with a near instantaneous automatic transfer to battery-derived AC output. Includes a set of
high current DC input terminals for simple installation (user supplies batteries and cabling - see owner's manual
for recommendations). Passes sine wave utility or generator power during battery charging and UPS line power
operation, plus efficient PWM sine wave AC output in inverter and UPS backup modes. Reliable large
transformer design, with frequency control powers resistive electronic loads or large inductive motors,
compressors and other items with high current needs on startup. Optional APSRM4 wired remote power switch
for RVs, over-the-road trucking,
conversion vans, high humidity
environments and fleet service
vehicles; a standalone alternative
power source for off-grid,
alternative energy or export
applications and as an
uninterruptible power supply
(UPS) for items compatible with a
10 millisecond transfer time.
NOTE: For sump pump
applications, Tripp Lite
recommends its "UT" Utility Truck
Inverter/Chargers.
with full status LEDs provides remote power inverter on/off switching and continuous status information
(APSRM4 sold separate). Supports an unlimited amount of runtime with any number of user-supplied batteries
Package Includes
connected. Highly adaptable to a variety of applications and site conditions with adjustable charger settings for
APSX750 Inverter/Charger
wet/gel battery types and selectable line to battery power transfer voltages.
Instruction manual with warranty
information
Features
Supports 230V AC output from a 230V AC line power source or 12V DC battery source
10 millisecond automatic transfer between line and battery power supports UPS protection during blackouts and voltage fluctuations for equipment
compatible with a 1/2 cycle transfer time
750W continuous AC output in inverter mode
1/4
Double Boost™ inverter output supports momentary startup loads up to 200% of the continuous rating for up to 10 seconds (see specification chart)
OverPower™ inverter output supports longer duration overloads to 150% for 1-60 minutes under ideal battery and temperature conditions
3 stage, selectable 5/20 amp battery charger with adjustable settings for wet/gel battery types
Dual C13 output receptacles pass 120V line power or inverter output through to connected equipment
3 position operating mode switch supports "AUTO" mode to enable automatic transfer between DC and AC modes, CHARGE-ONLY to maintain a full
battery charge when AC is present without auto transfer and SYSTEM OFF settings
Set of 6 front panel LEDs display continuous status
Set of 4 dip switches support wet/gel battery charging profiles, charger enable/inhibit, and selectable 144/163/182/201V AC low voltage auto transfer
during brownouts
Set of 4 additional dip switches support 4 levels of charger limiting relative to output load size, a battery equalization program and battery charger
low/high settings
Resettable 3A charger AC input breaker and resettable 4A AC output breaker and automatic 2 speed cooling fan protect the inverter from load and
temperature related failures
Automatic overload and thermal (overheating) shutoff
Front panel remote control connector enables remote off/on switching (requires APSRM4 switch accessory)
Specifications
General Info
RoHS
Y
OVERVIEW
Style
Heavy-duty with built-in battery charger
OUTPUT
Frequency Compatibility
50 Hz
Output Receptacles
(2) Universal outlets
Output (Watts)
750
Continuous Output Capacity (Watts)
750
Peak Output Capacity (Watts)
1500
Output Nominal Voltage
230V
Output Voltage Regulation
LINE POWER (AC): Maintains 230V nominal sine wave output from line power source. INVERTER POWER (AC):
Maintains PWM sine wave output voltage of 230 VAC (+/-5%).
Output Frequency Regulation
50 Hz (+/- 0.3 Hz)
Overload Protection
Includes 3A input breaker dedicated to the charging system and 4A output breaker for AC output loads
INPUT
Nominal Input Voltage(s) Supported
230V AC
2/4
Recommended Electrical Service
DC INPUT: Requires 12VDC input source capable of delivering 72A for the required duration (when used at full
continuous capacity - DC requirements increase during OverPower and DoubleBoost operation). For automotive
applications, professional hardwire installation with 100A minimum battery system fusing is recommended. AC
INPUT: 230VAC
Maximum Input Amps / Watts
DC INPUT: Full continuous load - 72A at 12VDC. AC INPUT: 6.2A at 230VAC with full inverter and charger load
(2.2A max charger-only / combined input load to support charger and AC output is automatically controllable to
66%-33%-0% based on AC output loading using the charger limiting set points - see manual for setting instructions)
Input Connection Type
DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: IEC-320 C14 inlet connection
Voltage Compatibility (VAC)
230
Voltage Compatibility (VDC)
12
BATTERY
Expandable Battery Runtime
Runtime is expandable with any number of user supplied wet or gel type batteries
DC System Voltage (VDC)
12
Battery Pack Accessory (Optional)
98-121 sealed lead acid battery (optional)
Battery Charge
Selectable 5 / 20 amp with 1/2 cycle (10 ms) transfer time
USER INTERFACE, ALERTS & CONTROLS
Front Panel LEDs
Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7
levels reported). See manual for sequences.
Switches
3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant
on/off control of the inverter system when used in conjunction with optional APSRM4 accessory when used in
inverter mode. In AC uninterruptible power mode, auto/remote setting enables automatic transfer from line power to
battery power - to maintain continuous AC power to connected loads.
SURGE / NOISE SUPPRESSION
AC Suppression Joule Rating
840
PHYSICAL
Shipping Dimensions (hwd / in.)
12.5 x 11 x 10.75
Shipping Dimensions (hwd / cm)
31.75 x 27.94 x 27.31
Shipping Weight (lbs.)
20
Shipping Weight (kg)
9.1
Unit Dimensions (hwd / in.)
7 x 8.75 x 9
Unit Dimensions (hwd / cm)
17.78 x 22.23 x 22.86
Unit Weight (lbs.)
18.6
Unit Weight (kg)
8.3
Cooling Method
Multi-speed fan
Material of Construction
Polycarbonate
Form Factors Supported
Mounting slots enable permanent placement of APSX750 on any horizontal surface (see manual for additional
mounting information)
3/4
ENVIRONMENTAL
Relative Humidity
0-95% non-condensing
LINE / BATTERY TRANSFER
Transfer Time (Line Power to
Battery Mode)
Transfer time from line power to battery mode: 10 milliseconds (typical - compatible with many computers, servers
and networking equipment - verify transfer time compatibility of loads for UPS applications)
Low Voltage Transfer to Battery
Power
Low voltage transfer to battery power: In AC "auto" mode, inverter/charger switches to battery mode as line voltage
drops to 144V (user adjustable to 163, 182, 201V - see manual)
High Voltage Transfer to Battery
Power
In AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 272
SPECIAL FEATURES
Remote Control Capability
Yes
CERTIFICATIONS
Certifications
RoHS Compliant
WARRANTY
Product Warranty Period (U.S. &
Canada)
1-year limited warranty
Product Warranty Period
(International)
2-year limited warranty
Product Warranty Period (Mexico)
2-year limited warranty
Product Warranty Period (Puerto
Rico)
1-year limited warranty
© 2015 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous improvement.
Specifications are subject to change without notice. Photos may differ slightly from final products.
4/4